Professional Documents
Culture Documents
Unit of Measure Related Settings in SAP - Application Server Infrastructure - SCN Wiki
Unit of Measure Related Settings in SAP - Application Server Infrastructure - SCN Wiki
Community WIKI SAP Community Welcome, Guest Login Register Search the Community
Purpose of document
This document is intended to serve as a guideline for creation of a new unit of measure and its related issues.
Definition - Unit of Measure is the criterion based on which you measure the quantity of the material. Unit of measure is a value for a physical size.
Examples
1. Base Unit of Measure: This is the unit of measure in which the stocks of a material are managed. The system converts all quantities entered in other units to the base unit of measure. All material
postings will occur with respect to base unit of measure.
2. Sales Unit of Measure: Allows a material to be sold in a unit differing from the base unit of measure. The sales unit is proposed automatically in the sales order, where it can be changed.
3. (Purchase)Ordering Unit of Measure: Allows a material to be purchase in a unit differing from the base unit of measure. The purchase order unit is proposed automatically in a purchase order,
where it can be changed.
4. Unit of Issue: Unit of measure in which the material is issued from the warehouse. It allows consumption, stock transfers, transfer postings, and physical inventories to be recorded in a unit
differing from the base unit of measure.
These UoM's are linked with each other for every material by conversation table which is explained below in section - IV-alternative unit of measure
Units of measurement are held centrally in the SAP R/3 System for all applications. It's a onetime creation during the project phase and it used across all modules.
Go to CUNI transaction
There are seven base dimensions, to which all other dimensions can be traced: Length, weight, time, electrical current, temperature, molecular mass and brightness.
Whenever unit of measurement is to be created first decide to which dimension it belongs to or otherwise UOM is created under no dimensions. Dimension helps us to group the UOMs.System will allow
to create business specific dimensions but always it is advisable to create UOM under the above 7 dimensions.
The ISO code is important for Electronic Data Interchange (EDI). It is used for
converting the SAP-internal units of measurement into standard units of
measurement. Converting the internal units of measurement into the ISO code is
required for exchanging data using EDI. So it is always advised to assign ISO code to
UOM. A list of the current international ISO codes for units of measurement is
available on the Internet at:
http://www.unece.org/cefact/codesfortrade/codes_index.htm
Business specific ISO codes can be created in the system if not available in the
system and assigned to UOM.
3.Select the particular dimension under which you want create the unit as shown
below
https://wiki.scn.sap.com/wiki/display/SI/Unit+of+Measure+related+settings+in+SAP 1/4
9/18/2019 Unit of Measure related settings in SAP - Application Server Infrastructure - SCN Wiki
Ex:TI
ME
4.
Sele
ct
TIM
E
and
then
click
on
Units
of
mea
sure
ment
All
other
units
unde
r the
dime
nsio
n
TIM
E is
defined with respect to S (second).S is the SI unit in this dimension
6. Maintain the details like Measurement text, commercial name and technical name.
7. Maintain the conversion factor with respect to SI unit. For example here In H unit of measure, conversion is
defined with respect to S second.
8. Maintain the decimal places (up to which decimal value should display) and decimal place rounding (up to
which the value should be rounded off)
9. Maintain the tick for commercial unit check box if that unit is used commercially. It will make this unit get
displayed in F4 help for unit of measure.
10. Maintain the tick for Value based check box if that unit will be
derived based on value. If it is based on quantity, check box
should not have a tick.
10. Select the ISO code for the unit and maintain Tick for primary
code if that is primary unit for the ISO code.
If the same ISO code is used for more than one unit of measure,
you can only flag one unit of measure as a primary unit for one
ISO code. Rest of unit of measure will be the secondary unit for
this ISO code.
11. Save.
https://wiki.scn.sap.com/wiki/display/SI/Unit+of+Measure+related+settings+in+SAP 2/4
9/18/2019 Unit of Measure related settings in SAP - Application Server Infrastructure - SCN Wiki
5. Change in Decimal Place Rounding.
As Unit of measurement is held centrally in the SAP R/3 System for all applications,
any change will have impact in all modules.
Example: "HR" unit with commercial measuring unit ticked in CUNI transaction
Go to MM02, in sales view check search help (F4) in sales unit field for HR with
search criteria H*,you will find the Unit" HR"
It is defined in Basic data view in material master. All other units defined, conversion should be
maintained with respect to unit of measure in Material master additional data.
Base unit of measure once defined and processed cannot be changed to other unit of
measure.
Sales unit
Alternate unit of measure conversion is maintained with respect to base unit of measure in
additional data of material master
3 Comments
https://wiki.scn.sap.com/wiki/display/SI/Unit+of+Measure+related+settings+in+SAP 3/4
9/18/2019 Unit of Measure related settings in SAP - Application Server Infrastructure - SCN Wiki
Guest
Please update Link for "A list of the current international ISO codes for units of measurement is available on the Internet at:"
http://www.unece.org/cefact/codesfortrade/codes_index.htm
BR, Patrick
Guest
Extremely helpful document.
Simran
muthuraman govindasamy
Thank you Girirsjh
Awesome
Muth
https://wiki.scn.sap.com/wiki/display/SI/Unit+of+Measure+related+settings+in+SAP 4/4