1. Enable WI-FI mode of your iPhone .Go to iPhone App Store, search “p2pipc” iPhone monitor application and install it.
2. Add the camera to the App p2pipc.
1). Run the p2pipc, you will find “Add Camera” Please click here to add cameras. 2). The methods to add camera to p2pipc.
To find the camera’s P2P ID number, JWEV-XXXXXX-XXXXX
Method 1 : Input the CameraID Username Password of your camera manually.
Then click “Done” button. Method 2 : Please click “LAN Search”button then you will get a list of the cameras in the same LAN with your iPhone. Choose the camera which you want to view. Method 3 : Scan the QRCode: click the “Scan ID” button, at the bottom of the camera, there is a label with QRCode, then use your iPhone to scan the bar code, it will show the ID, then press “Done”. 3. Finished adding the camera, you will see following picture:
4. Live video and operation interface.
Pay attention: Audio and talkback function cant be enabled at the same time. By sliding the screen, you can control your camera. 5. Snapshots & Recording, the files can be found here.