You are on page 1of 2

The node used for storing database of subscribers in certain coverage area is

MSC - VLR - BSC

Channel bandwidth of GSM is


200K 220M 20K HZ

Data rate of GSM


9.6 KBPS 13 114.4

Frequency Modulation is performed to Mega bandwidth to make the length of antenna


few cm. According to the rule
la 1/f laf l=f+1

Using the same group of frequencies in 2 different cells cause


co-channel interference - adjacent interfernce -white gaussian noise

The node used for connectivity and charging in GSM is


MSC - eNoB -BTS

The node used for connectivity with other network and charging in GSM is
MSC - MSCS - GMSC

The list for faulty or non-type approved handsets in EIR is


BLACK GREY WHITE

In ��, the user has a dedicated path.


CIRCUIT SWITCHING - BACKET SWITCHING

3GPP adopted ETSI proposal to produce 3G with the air interface based on
FDMA/TDMA TECHNOLOGY -WCDMA TECH - OFDMA TECH -NONE

Scrambling Codes (PN codes) are used to


DISTINGUISH BETWEEN CELLS IN THE DOWNLINK -DISTINGUISH BETWEEN USER'S SERVICE -
BOTH A&B - DISTINGUISH BETWEEEN THEUPLINK

Each 3G carrier have a bandwidth of

The used Modulation scheme in UMTS is

MME is the node responsible for the signaling in LTE system

What�s Layer 2 in the OSI 7 Layers

the first ever made phone call was in

In case of sending SMS from Vodafone subscriber to other operator subscriber and
the B number is Absent, in which system the SMS will be stored till the B number is
available?

The Typical UMTS chip rate is:

What is Erlang?
Normal Handover decision is based on

You might also like