Professional Documents
Culture Documents
1、 Check electrical specifications and plug into a properly Features Indication: DBC-8E
grounded outlet for DBC-8E. (DBC-6 & DBC-9 are CLEAR: Press this key, all units then register zero.
mechanically operated, main power is not required) LOCK: Press this key to stop all counting;
2、 The D.C. Laboratory counter has been designed for simple % : Press this key, percentage of each unit can be
read
operation. Before each use, be sure that all the units are directly from each window.
set at zero. To reset the units, press the CLEAR key, or DECREASE: Press this key, then each stroke will decrease 1 number
turn the reset knob, all unit will then register ZERO. both in Totalizer and the corresponding unit.
Be sure to press all the way down like typewriter and to After functioning LOCK, % or DECREASE, one more press of this
release the key completely. Key will function again to the normal operation.
4、 When making a differential white cell count, press the PARTS LIST
the cell type observed in the microscope. When the DBC-8E DBC-9
shown in each window is a fraction of 100 and therefore 4 Exterior case 3 Flywheel, figure
equals the percentage of that type cell in the sample of 6 Circuit Board 10 Key, plastic
8 Transformer 18 Bell
5、 Each stroke registers both in unit corresponding to its 15 Control panel 24 Reset
Knobs
pressed key and in the Totalizer. The Totalizer is the unit 16 Power Switch
a short sound.
record 100, 200, 300 etc., just press button “%”, the
window.
emission.
Manufacturer:
Gemmy Industrial
Taipei, Taiwan
EU Representative:
GEMMY EUROPE
23 rue de Rotterdam
4000 Liege, Belgium
Tel: 32-4-2535989
Fax: 32-4-2536824
OPERATORS MANUAL
Model: DBC-8E
DBC-6 / 9
IMPORTANT
1、 Always press the key all the way down.
2、 Always press the key tenderly like to typewriter or computer keyboard.
Press the key RANDOMLY or HARSHLY will damage the equipment definitely.
3、 GEMMY will not ensure any responsibility on person who violate the above regulations.