Professional Documents
Culture Documents
NEW...
▲ ADJUSTABLE WRENCH
113A.C
(page 141)
▲ SHEATHED ADJUSTABLE
WRENCH
113A.CG
(page 142)
GENERAL TOOLING
Fixed-size and
adjustable wrenches
For standards, selection guide - safety recommendations, see p 868. F05 - 111
section 05 EN 13/09/04 9:00 Page 112
GENERAL TOOLING
COMBINATION WRENCHES
OGV® SERIES 40
HIGH PERFORMANCE COMBINATION WRENCH
P HIGH PERFORMANCE
P OPTIMUM ACCESS
• Versatility
min. - Slim ends offer a better compromise
between power and accessibility.
- 30° increments.
- Side or top approach.
P INHERENT RELIABILITY
• Manufacturing centre of
excellence
– The utmost reliability of tools
produced at the ISO 9002
approved Villeneuve le Roi facility
stems from cold forging and
repeated stringent checks
throughout the manufacturing
process.
GENERAL TOOLING
COMBINATION WRENCHES
STANDARD SERIES
▼ 40 METRIC AND INCH OGVJCOMBINATION WRENCHES
W ISO 3318, DIN 3113, NF E 74-304
• 12-point OGVJ ring angled at 15°.
• H: 6-point ring angled at 15°.
• Metric sizes from 3.2 to 32 mm.
• Inch sizes from 1/4" to 1 1/4".
• Satin chrome finish.
3 D
F F U" H T
mm/" kg
40.JE9 • 8 - 9 - 10 - 11 - 12 - 13 - 14 - 17 - 19 0,67
40.JE11 • 7 - 8 - 10 - 11 - 12 - 13 - 14 - 16 - 17 - 18 - 19 0,90
40.JN8 • 8 - 10 - 11 - 13 - 17 - 19 - 22 - 24 0,99
40.J12 • 7 - 8 - 10 - 11 - 12 - 13 - 16 - 17 - 18 - 19 - 22 - 24 1,30
40.JE16 • 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17- 18 - 19 - 21 - 22 - 23 - 24 2,00
40.JE18 • 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 21 - 22 - 23 - 24 2,03
6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 21 - 22 - 23 - 24 - 26 -
40.JE24 • 4,70
27 - 28 - 29 - 30 - 32
40.JU9 • 1/4 - 5/16 - 3/8 - 7/16 - 1/2 - 9/16 - 5/8 - 11/16 - 3/4 0,67
40.JU12 • 1/4 - 5/16 - 3/8 - 7/16 - 1/2 - 9/16 - 5/8 - 11/16 - 3/4 - 13/16 - 7/8 - 15/16 1,37
40.JN8T N.38A-8C 8 - 10 - 11 - 13 - 17 - 19 - 22 - 24 1,07
40.JE16T N.38A-17A 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 21 - 22 - 23 - 24 2,17
40.JU6T N.38A-6B 3/8 - 7/16 - 1/2 - 9/16 - 5/8 - 11/16 0,50
1/4 - 5/16 - 11/32 - 3/8 - 7/16 - 1/2 - 9/16 - 5/8 - 11/16 - 3/4 - 13/16 - 7/8 -
40.JU17T N.38A-17A 3,29
15/16 - 1" - 1 1/16" - 1 1/8" - 1 1/4"
6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 21 - 22 - 23 - 24 - 26 -
40.P24M • 7,23
27 - 28 - 29 - 30 - 32
GENERAL TOOLING
COMBINATION WRENCHES
Compatible with
+ the Facom modular
storage system
Comprisingt D
F Tray
mm/" kg
MOD.40-1 40.6-7-8-9-10-11-12-13-14-15-16-17-18-19-22-24 PL.348A 1,743
MOD.40-2 40.27-29-30-32 PL.314 2,065
MOD.40-4 40.1/4-5/16-11/32-3/8-7/16-1/2-9/16-5/8-11/16-3/4-13/16-7/8-15/16 PL.605 1,600
FAST SERIES
40R
GENERAL TOOLING
COMBINATION WRENCHES
A B B' C C' L D
F
mm mm mm mm mm mm g
40R.8 8 18,5 12,9 4,3 6,0 126 26
40R.9 9 20,5 14,0 4,3 6,1 133 29
40R.10 10 22,9 15,9 4,8 6,6 141 39
40R.11 11 24,9 17,0 5,1 7,0 148 45
40R.12 12 26,8 18,4 5,3 7,5 157 56
40R.13 13 28,8 19,8 5,6 8,0 165 61
40R.14 14 30,6 21,2 6,0 8,5 172 73
40R.15 15 32,0 22,4 6,6 9,2 179 79
40R.16 16 34,8 23,8 6,9 9,8 187 93
40R.17 17 36,7 25,0 7,0 10,3 193 113
40R.18 18 38,5 26,4 7,4 10,9 201 120
40R.19 19 40,9 29,4 7,6 11,3 209 140
40R.20 20 42,5 29,4 8,0 11,6 217 165
40R.21 21 45,0 30,7 8,1 11,9 223 182
40R.22 22 47,0 32,0 8,2 12,3 240 205
40R.23 23 48,5 33,4 8,4 12,6 250 236
40R.24 24 50,5 34,7 8,5 12,9 260 260
3 D
F F U" H
mm kg
40R.JE9 • 8-9-10-11-12-13-14-17-19 0,607
8-9-10-11-12-13-14-15-16-
40R.JE17 • 1,947
17-18-19-20-21-22-23-24
40R.JE9T N.38A-9E 8-9-10-11-12-13-14-17-19 0,737
Compatible with
+ the Facom modular
storage system
GENERAL TOOLING
COMBINATION WRENCHES
COMPACT SERIES
▼ 39 METRIC AND INCH SHORT COMBINATION WRENCHES
• Short shank and compact heads.
• Ideal where access is restricted.
• Metric sizes from 3.2 to 17 mm.
• Inch sizes from 1/8" to 11/16".
• 12-point ring angled at 15°.
• H: 6-point ring angled at 15°.
• Satin chrome finish.
F F L B x B' C x C' D
u/t k
A mm A" mm mm mm g
39.3,2H 39.1/8H 77 u 10,0 x 7,0 3,1 x 3,1 9 CKS.61A
39.4H 39.5/32H 77 u 10,0 x 8,0 3,1 x 3,1 9 CKS.61A
39.5H 39.3/16H 82 u 11,8 x 9,0 3,5 x 4,0 10 CKS.61A
39.5,5H 39.7/32H 84 u 11,8 x 9,5 3,5 x 4,0 10 CKS.61A
39.6 39.1/4 90 t 15,0 x 10,4 4,1 x 5,0 13 CKS.61A
39.7 39.9/32 90 t 15,0 x 11,5 4,1 x 5,0 13 CKS.61A
39.8 39.5/16 94 t 17,2 x 12,5 4,5 x 5,8 18 CKS.61A
39.9 39.11/32 98 t 19,4 x 14,0 4,8 x 6,0 25 CKS.61A
39.10 39.3/8 103 t 21,5 x 15,3 5,1 x 6,4 30 CKS.61A
39.11 39.7/16 109 t 23,7 x 16,8 5,3 x 6,8 35 CKS.61A
39.12 127 t 26,0 x 18,0 5,5 x 7,5 47 CKS.61A
39.13 39.1/2 141 t 28,0 x 19,5 5,8 x 8,0 54 CKS.61A
39.14 39.9/16 147 t 30,2 x 20,8 6,0 x 8,5 70 CKS.61A
39.15 152 t 32,3 x 22,1 6,4 x 9,0 80 CKS.61A
39.16 39.5/8 158 t 34,4 x 23,6 6,7 x 9,6 90 CKS.61A
39.17 39.11/16 165 t 36,5 x 25,0 6,9 x 10,0 100 CKS.61A
3 D
F F U"
mm/" g
39.JE9T N.38A-9E 7 - 8 - 10 - 11 - 12 - 13 - 14 - 16 - 17 580
39.JE10T N.38A-10A 3,2 - 4 - 5 - 5,5 - 6 - 7 - 8 - 9 - 10 - 11 250
39.JE16T N.38A-16A 3,2 - 4 - 5 - 5,5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 700
39.JU10T N.38A-10A 1/8 - 5/32 - 3/16 - 7/32 - 1/4 - 9/32 - 5/16 - 11/32 - 3/8 - 7/16 250
39.JU14T N.38A-16A 1/8 - 5/32 - 3/16 - 7/32 - 1/4 - 9/32 - 5/16 - 11/32 - 3/8 - 7/16 - 1/2 - 9/16 - 5/8 - 11/16 560
GENERAL TOOLING
COMBINATION WRENCHES
OFFSET SERIES
▼ 41 METRIC OFFSET COMBINATION WRENCHES
• 12-point ring offset to clear fingers or obstacles.
• Metric sizes from 6 to 32 mm.
• Chrome finish.
A B x B' C x C' D L D
F k
mm mm mm mm mm g
41.6 6 14,5 x 11,0 4,0 x 6,0 12,5 113 27 CKS.61A
41.7 7 18,5 x 13,0 4,5 x 7,0 15,0 127 35 CKS.61A
41.8 8 18,5 x 13,0 4,5 x 7,0 15,0 127 35 CKS.61A
41.9 9 23,5 x 15,5 5,0 x 8,0 16,5 142 50 CKS.61A
41.10 10 23,5 x 15,5 5,0 x 8,0 16,5 142 50 CKS.61A
41.11 11 27,5 x 18,5 5,5 x 8,6 18,5 160 75 CKS.61A
41.12 12 27,5 x 18,5 5,5 x 8,6 18,5 160 75 CKS.61A
41.13 13 31,5 x 21,5 5,5 x 9,0 18,5 180 100 CKS.61A
41.14 14 31,5 x 21,5 5,5 x 9,0 18,5 180 100 CKS.61A
41.15 15 36,5 x 24,5 6,6 x 10,3 20,5 200 130 CKS.61A
41.16 16 36,5 x 24,5 6,6 x 10,3 20,5 200 130 CKS.61A
41.17 17 40,5 x 27,0 7,3 x 11,2 22,0 224 195 CKS.61A
41.18 18 40,0 x 27,0 7,3 x 11,2 22,0 224 195 CKS.61A
41.19 19 43,0 x 30,0 7,8 x 12,6 24,0 248 250 CKS.61A
41.21 21 48,0 x 33,0 8,2 x 13,0 26,5 275 320 CKS.61A
41.22 22 48,0 x 33,0 8,2 x 13,0 26,5 275 320 CKS.61A
41.23 23 53,0 x 36,0 9,0 x 14,0 28,5 302 415 CKS.61A
41.24 24 53,0 x 36,0 9,0 x 14,0 28,5 302 415 CKS.61A
41.26 26 59,0 x 40,0 9,5 x 15,0 31,5 332 555 CKS.60A
41.27 27 59,0 x 40,0 9,5 x 15,0 31,5 332 555 CKS.60A
41.28 28 63,0 x 43,5 10,0 x 15,6 33,5 364 700 CKS.60A
41.29 29 63,0 x 43,5 10,0 x 15,6 33,3 364 700 CKS.60A
41.30 30 68,0 x 46,5 10,5 x 16,5 35,5 398 850 CKS.60A
41.32 32 68,0 x 46,5 10,5 x 16,5 35,5 398 850 CKS.60A
3 D
F F U" T H
mm kg
41.JE9 • 8-9-10-11-12-13-14-17-19 0,930
41.JE18 • 6-7-8-9-10-11-12-13-14-15-16-17-18-19-21-22-23-24 3,017
41.JE24 • 6-7-8-9-10-11-12-13-14-15-16-17-18-19-21-22-23-24-26-27-28-29-30-32 6,730
41.JE9T N.38A-9B 8-9-10-11-12-13-14-17-19 1,050
41.JE12T N.38A-12B 8-10-11-12-13-14-16-17-18-19-21-22 2,095
41.P24M • 6-7-8-9-10-11-12-13-14-15-16-17-18-19-21-22-23-24-26-27-28-29-30-32 9,380
GENERAL TOOLING
COMBINATION WRENCHES
POWER SERIES
▼ 40LA METRIC AND INCH LONG COMBINATION WRENCHES
W Strength to ISO 3318, ISO 7738, NF ISO 3318/7738.
• Long shank for extra torque.
• Metric sizes from 19 to 50 mm.
• Inch sizes from 3/4" to 2".
• 12-point OGV J ring angled at 15°.
F F L B x B' C x C' D
A mm A" mm mm mm g
40.19LA 40.3/4LA 329 45 x 29,6 8,7 x 12 240
40.21LA 40.13/16LA 355 49 x 32,3 9,5 x 13 305
40.22LA 40.7/8LA 368 51 x 33,8 9,9 x 14 360
40.23LA 40.15/16LA 381 53 x 35,4 10,3 x 14,5 370
40.24LA 394 55 x 36,9 10,7 x 15 455
40.26LA 40.1'LA 420 59 x 39,4 11,5 x 15,5 520
40.27LA 40.1'1/16LA 433 61 x 40,6 11,9 x 16 590
40.28LA 40.1'1/8LA 446 62,4 x 42,2 12,3 x 16,5 600
40.29LA 446 62,4 x 42,2 12,3 x 16,5 600
40.30LA 40.1'1/4LA 472 65 x 45,2 13,1 x 17 800
40.32LA 498 69,5 x 47,8 13,9 x 18 850
40.33LA 40.1'5/16LA 498 69,5 x 47,8 13,9 x 18 850
40.34LA 524 72,7 x 50,7 14,7 x 19 1040
40.35LA 524 72,7 x 50,7 14,7 x 19 1040
40.36LA 40.1'7/16LA 550 76 x 53,6 15,5 x 20 1200
40.38LA 40.1'1/2LA 576 80 x 56 16,3 x 22 1435
40.41LA 615 86 x 59,2 17,5 x 23 1720
40.42LA 40.1'5/8LA 615 86 x 59,2 17,5 x 23 1720
40.46LA 40.1'13/16LA 680 95 x 65,85 19,5 x 25 2435
40.50LA 40.2'LA 732 103 x 71 21,1 x 30 3500
D
F H 3 mm/"
kg
40LA.JE17 • 19-21-22-23-24-26-27-28-29-30-32-33-35-36-38-41-42 13,8
40.40LAJE26 • (40) -8-9-10-11-12-13-14-15-16-17-18- (40LA) -19-21-22-23-24-26-27-28-29-30-32-33-35-36-38 11,1
(40) -1/4-5/16-3/8-7/16-1/2-9/16-5/8-11/16- (40LA) 3/4-13/16-7/8-15/16-1-11/16-11/8-
40.40LAJU20 • 9
11/4-15/16-13/8-17/16-11/2
A B x B' C x C' L D
F
mm mm mm mm kg
41.46L 46 95 x 69,0 15,0 x 24 520 1,300
41.50L 50 103 x 75,0 16,5 x 26 560 1,450
41.55L 55 113 x 84,5 18,0 x 28 610 1,580
41.60L 60 123 x 90,0 20,0 x 31 660 2,300
41.65L 65 133 x 98,0 22,0 x 31 710 2,650
GENERAL TOOLING
OPEN-END WRENCHES
OPEN-END WRENCH 44
Computer-aided design Powerful torque
and manufacture Optimum alloy-steel structure and
Full CAD/CAM facilities - calculation of heat treatment throughout ensure
all radii, cross-sections and profiles, high strength. The long shank of
together with stress analysis for wrench 44 allows extra leverage
optimum configuration and minimum without compromising safety.
bulk - were used to perfect this high- Tightening torque: ISO 1711, DIN
performance wrench 44 with slim pro- 899, NF E 74.381
file and powerful torque.
STANDARD SERIES
▼ 44 METRIC AND INCH OPEN-END WRENCHES
WISO 10102, DIN 3110, NF E 74-304
• Metric sizes from 3.2 to 42 mm.
• Inch sizes from 1/4" x 5/16" to 1 7/16" x 1 5/8".
• Satin chrome finish.
F F B x B' C L D
A x A' mm A x A' " mm mm mm g
44.3,2X5,5 11,0 x 13,5 3,0 90 11
44.4X5 11,0 x 13,5 3,0 90 11
44.6X7 44.1/4X5/16 15,5 x 17,5 3,5 120 20
44.8X9 18,5 x 21,0 3,8 137 30
44.8X10 44.11/32X13/32 19,0 x 23,0 4,2 143 38
44.10X11 44.3/8X7/16 23,0 x 25,0 4,7 152 47
44.10X13 23,0 x 29,0 5,1 162 58
44.11X13 25,5 x 29,0 5,1 167 65
44.12X13 44.7/16X1/2 25,5 x 29,0 5,1 167 64
44.12X14 44.1/2X9/16 29,0 x 33,5 5,5 177 77
44.14X15 31,0 x 33,0 5,8 182 87
44.13X17 31,0 x 37,0 6,3 192 118
44.16X17 35,5 x 37,0 6,3 200 118
44.16X18 44.5/8X11/16 37,0 x 42,0 6,8 210 144
44.17X19 44.11/16X3/4 37,0 x 42,0 6,8 210 144
44.18X19 39,0 x 42,0 7,3 220 157
44.20X22 44.3/4X13/16 43,0 x 48,5 7,5 240 200
44.21X23 47,0 x 50,5 7,8 242 218
44.22X24 44.7/8X15/16 47,5 x 52,0 8,3 261 258
44.24X27 51,0 x 58,0 8,8 270 324
44.25X28 56,0 x 61,6 8,8 282 360
44.26X28 44.1'X1'1/16 56,0 x 61,6 8,8 282 360
44.27X29 59,0 x 64,0 9,5 301 450
44.27X30 59,0 x 64,0 9,5 301 450
44.27x32 44.1'1/8X1'1/4 63,0 x 70,0 9,8 318 513
44.30X32 44.1'3/16X1'5/16 63,0 x 70,0 9,8 318 513
44.33X35 71,0 x 75,0 11,5 342 720
44.34X36 71,0 x 75,0 11,5 342 720
44.36X41 44.1'3/8X1'1/2 78,0 x 87,0 12,0 381 945
44.38X42 44.1'7/16X1'5/8 78,0 x 87,0 12,0 381 945
GENERAL TOOLING
OPEN-END WRENCHES
Compatible with
+ the Facom modular
storage system
D
F Comprising Tray
kg
MOD.44-1 44.6x7-8x9-10x11-12x13-14x15-16x17-18x19-21x23-22x24 mm PL.315 1,315
MOD.44-2 44.26x28-27x29-30x32 mm PL.316 1,578
LOW-PROFILE SERIES
▼ 31 METRIC LOW-PROFILE OPEN-END WRENCHES
W ISO 3318, NF E 74-304
• Metric sizes from 6 to 23 mm.
• 30 % slimmer than a conventional open-end wrench.
• Essential in confined spaces and for locknuts.
• Chrome finish.
F B x B' C L D
A mm mm mm mm g
31.6X7 16,0 x 19,0 2,2 148 18
31.8X9 20,0 x 24,5 2,4 175 28
31.10X11 20,5 x 25,0 2,4 175 28
31.12X13 28,0 x 33,0 3,6 210 68
31.14X15 29,0 x 33,0 3,6 210 68
31.16X17 38,5 x 43,0 4,2 250 140
31.18X19 38,5 x 43,0 4,2 250 140
31.20X22 49,0 x 53,0 5,6 292 270
31.21X23 49,0 x 53,0 5,6 292 270
GENERAL TOOLING
OPEN-END WRENCHES
3 D
F FU
mm kg
31.JE6T N.38A-6B 8 x 9 - 10 x 11 - 12 x 13 - 14 x 15 - 16 x 17 - 18 x 19 0,6
31.JE9T N.38A-9B 6 x 7 - 8 x 9 - 10 x 11 - 12 x 13 - 14 x 15 - 16 x 17 - 18 x 19 - 20 x 22 - 21 x 23 1,022
COMPACT SERIES
▼ 22 METRIC AND INCH MIDGET WRENCHES WITH OPEN ENDS AT 15°
W ISO 3318, NF E 74-304
• Metric sizes from 3.2 to 13 mm.
• Inch sizes from 3/16 x 1/4 to 1/2 x 9/16.
• Short shank and slim heads for access in confined
spaces.
• Chrome finish.
F F B x B' C L D
A mm A" mm mm mm g
22.3,2X5,5 10 x 13 2,4 70 6
22.4X5 10 x 13 2,4 70 6
22.6X7 22.3/16X1/4 14 x 16 2,7 80 10
22.7/32x9/32 14 x 16 2,7 80 10
22.8X9 22.5/16x3/8 18 x 20 3,0 90 17
22.10X11 22.11/32x7/16 21 x 23 3,0 100 22
22.12X13 22.1/2X9/16 26 x 28 3,5 110 36
3 D
F FU
mm/" g
22.JE6T N.38-6A 3,2 x 5,5 - 4 x 5 - 6 x 7 - 8 x 9 - 10 x 11 - 12 x 13 140
22.JU5T N.38A-5C 3/16 x 1/4 - 7/32 x 9/32 - 5/16 x 3/8 - 11/32 x 7/16 - 1/2 x 9/16 130
GENERAL TOOLING
OPEN-END WRENCHES
▼ 34 METRIC AND INCH MIDGET WRENCHES WITH OPEN ENDS AT 15° AND 75°
W ISO 3318, NF E 74-304
• Metric sizes from 3.2 to 17 mm.
• Inch sizes from 3/16" to 11/16".
• 15° and 75° angles for fasteners out of standard-
tool reach.
• Short shank and slim heads for manoeuvrability.
• Chrome finish.
F F B C L D
A mm A" mm mm mm g
34.3,2 10,0 2,4 70 6
34.4 10,0 2,4 70 6
34.5 34.3/16 13,0 2,4 75 8
34.5,5 34.7/32 13,0 2,4 75 8
34.6 34.1/4 15,0 2,7 80 10
34.7 34.9/32 15,0 2,7 80 10
34.8 34.5/16 18,5 3,0 90 18
34.9 34.11/32 18,5 3,0 90 18
34.10 34.3/8 22,0 3,0 100 22
34.11 34.13/32 22,0 3,0 100 22
34.7/16 22,0 3,0 100 22
34.12 34.1/2 27,0 3,5 120 36
34.13 34.9/16 27,0 3,5 120 36
34.14 27,0 3,5 120 40
34.15 34.5/8 33,0 4,5 140 67
34.16 34.11/16 33,0 4,5 140 67
34.17 33,0 4,5 140 67
3 D
F FU
mm/" g
34.JL16T N.38A-16A 3,2 - 4 - 5 - 5,5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 560
34.JU13T N.38A-13B 3/16 - 7/32 - 1/4 - 9/32 - 5/16 - 11/32 -3/8 - 13/32 - 7/16 -1/2 - 9/16 - 5/8 - 11/16 430
GENERAL TOOLING
OPEN-END WRENCHES
POWER SERIES
▼ 45 HEAVY-DUTY OPEN-END WRENCHES
W DIN 894
• Metric sizes from 30 to 75 mm.
• Forged in carbon steel and hardened to 120 kg/mmz for
high torque applications (construction, railways, shipyards,
farming, oil rigs, etc.).
• Hook eye.
• Burnished finish.
A B C L D
F
mm mm mm mm kg
45.30 30 62,0 11,0 255 0,26
45.32 32 66,0 12,0 270 0,315
45.34 34 66,0 12,0 270 0,315
45.36 36 74,0 13,0 300 0,43
45.38 38 74,0 13,0 300 0,43
45.41 41 85,5 13,5 346 0,58
45.46 46 95,5 15,5 381 0,75
45.50 50 102,0 16,0 415 1,05
45.55 55 112,5 16,0 460 1,2
45.60 60 122,5 18,0 493 1,7
45.65 65 130,5 18,0 518 1,7
45.70 70 143,0 20,0 573 2,2
45.75 75 151,0 21,0 605 2,8
+ Safety
- 2 "colour warning" insulation is applied by dipping, in the area where the hand grips the tool.
GENERAL TOOLING
RING WRENCHES
STANDARD SERIES
GENERAL TOOLING
RING WRENCHES
F FU H T 3 D
mm/" kg
55A.JN6 • 8x9-10x11-12x13-14x15-16x17-18x19 0,738
55A.JD8 • 6x7-8x9-10x11-12x13-14x15-16x17-18x19-20x22 1,034
55A.JE8 • 8x9-10x11-12x13-14x15-16x17-18x19-21x23-24x26 1,422
55A.JD10 • 6x7-8x9-10x11-12x13-14x15-16x17-18x19-20x22-24x27-30x32 2,030
55A.JE12 • 6x7-8x9-10x11-12x13-14x15-16x17-18x19-21x23-22x24-26x28-27x29-30x32 3,288
55A.JD12 • 6x7-8x9-10x11-12x13-14x15-16x17-18x19-20x22-21x23-24x26-25x28-27x32 3,076
55A.JD12A • 6x7-8x9-10x11-12x13-14x15-16x17-18x19-20x22-21x23-24x27-25x28-30x32 3,116
55A.JE14 • 6x7-8x9-10x11-12x13-14x15-16x17-18x19-21x23-22x26-26x28-27x29-30x32-36x41-38x42 6,178
55A.JU6A • 1/4x5/16-3/8x7/16-1/2x9/16-5/8x11/16-3/4x13/16-7/8x15/16 0,990
55A.JU8 • 1/4x5/16-11/32x13/32-3/8x7/16-1/2x9/16-5/8x11/16-19/32x25/32-3/4x13/16-7/8x15/16 1,266
55A.JU10 • 1/4x5/16-11/32x13/32-3/8x7/16-1/2x9/16-5/8x11/16-19/32x25/32-3/4x13/16-7/8x15/16-1"x1 1/16"-1 1/8"x1 1/4" 2,400
55A.JN6T N.38A-6B 8x9-10x11-12x13-14x15-16x17-18x19 0,830
55A.JD8T N.38A-8B 6x7-8x9-10x11-12x13-14x15-16x17-18x19-20x22 1,120
55A.JE8T N.38A-8B 8x9-10x11-12x13-14x15-16x17-18x19-21x23-24x26 1,510
55A.JU6AT N.38A-6B 1/4x5/16-3/8x7/16-1/2x9/16-5/8x11/16-3/4x13/16-7/8x15/16 1,080
55A.JU8T N.38A-8B 1/4x5/16-11/32x13/32-3/8x7/16-1/2x9/16-5/8x11/16-19/32x25/32-3/4x13/16-7/8x15/16 1,356
55A.JU8AT N.38A-8B 1/4x5/116-3/8x7/16-1/2x9/16-2/8x11/16-3/4x13/16-7/8x15/16-1"x1 1/16"-1 1/8"x1 1/4" 1,220
55A.P14E • 6x7-8x9-10x11-12x13-14x15-16x17-18x19-21x23-22x24-26x28-27x29-30x32-36x41-38x42 8,500
Compatible with
+ the Facom modular
storage system
Comprisingt D
F Tray
mm/" kg
MOD.55-1 55A.6x7-8x9-10x11-12x13-14x15-16x17-18x19 PL.317A 0,92
MOD.55-2 55A.21x23-22x24-26x28 PL.318 1,45
55A.1/4x5/16-11/32x13/32-3/8x7/16-1/2x9/16-
MOD.55-3 PL.600 1,02
5/8x11/16-19/32x25/32-3/4x13/16
GENERAL TOOLING
RING WRENCHES
COMPACT SERIES
▼ 59 METRIC STRAIGHT RING WRENCHES
W ISO 10103, DIN 837, NF E 74-311
• Slim rings and short shank for improved clearance.
• 12-point heads giving 30° increments.
• Satin chrome finish.
F B x B' C L D
A mm mm mm mm g
59.6X7 9,9 x 11,2 4,7 100 10
59.8X9 12,5 x 14,0 5,2 115 16
59.10X11 15,5 x 16,5 6,4 128 28
59.12X13 18,5 x20,5 7,3 143 40
59.14X15 21,0 x 22,5 7,3 157 50 L
59.16X17 23,5 x 24,5 8,5 168 65
59.18X19 26,0 x 27,5 9,2 189 80
59.21X23 31,2 x 33,8 11,6 217 130 B B'
59.22X24 31,2 x 33,9 11,6 217 130
59.26X28 36,5 x 40,5 11,8 265 230
59.27X29 38,9 x 43,4 12,8 285 270
59.30X32 42,5 x 45,0 12,8 285 280
C C
F F 3 D
H
U mm kg
59.JN6 • 8 x 9 - 10 x 11 - 12 x 13 - 14 x 15 - 16 x 17 - 18 x 19 0,279
6 x 7 - 8 x 9 - 10 x 11 - 12 x 13 - 14 x 15 - 16 x 17 - 18 x 19 - 21 x 23
59.JE12 • 1,329
- 22 x 24 - 26 x 28 - 27 x 29 - 30 x 32
59.JN8T N.38A-8C 8 x 9 - 10 x 11 - 12 x 13 - 14 x 15 - 16 x 17 - 18 x 19 - 21 x 23 - 22 x 24 0,570
GENERAL TOOLING
RING WRENCHES
HALF-MOON SERIES
▼ 57 METRIC HALF-MOON RING WRENCHES
W ISO 3318, NF E 74-304
• Half-moon shape reaches where standard tools
cannot.
• 12-point ring giving 30° increments.
• Satin chrome finish.
B’
3 D
F H
mm g
57.JE5 • 10 x 12 - 11 x 13 - 14 x 17 - 16 x 18 - 19 x 22 850
GENERAL TOOLING
RING WRENCHES
POWER SERIES
▼ 54 METRIC HEAVY-DUTY OFFSET RING WRENCHES
• Metric sizes from 24 to 70 mm.
• Offset 12-point ring and 30° increments.
• High power from resilient ring combined with long
removable handle (to separate order).
• Chrome finish.
F BxC d D x L1 ExL D F L2 L3 D
mm mm mm kg mm mm kg
54A.24 38 x 17,0 18,5 x 85 29,5 x 180 0,380 54.M1B 460 555 0,580
54A.30 48 x 18,0 18,5 x 95 33,5 x 200 0,550 565
54A.32 49 x 18,0 21,5 x 116 34,0 x 235 0,700 730
54A.36 54 x 20,0 21,5 x 120 35,5 x 245 0,840 54.M2B 610 735 1,112
54A.41 62 x 22,0 21,5 x 127 39,5 x 265 1,000 748
54A.46 69 x 23,0 24,5 x 129 40,0 x 280 1,300 910
54A.50 76 x 25,5 24,5 x 129 42,5 x 290 1,450 54.M3B 760 920 2,214
54A.55 81 x 28,0 24,5 x 136 45,5 x 300 1,500 925
54A.60 90 x 30,5 29,5 x 156 49,0 x 345 2,300 1050
54A.65 98 x 33,0 29,5 x 158 53,0 x 355 2,400 54.M4B 860 1060 2,881
54A.70 105 x 35,5 29,5 x 160 55,0 x 365 2,800 1065
3 D
F Handles T
mm kg
24 - 30 - 32 - 36 - 41 -
54.P9M M1B,M2B,M3B . 13,5
46 - 50 - 55
RATCHET SERIES
GENERAL TOOLING
RING WRENCHES
F F B x B' C L D
A mm A" mm mm mm g
68B.6X7 68B.1/4x5/16 14 x 16 6,5 110,0 70
68B.8X9 68B.5/16x11/32 16 x 19 7,8 120,0 72
68B.10X11 68B.3/8x7/16 19 x 22 8,3 130,0 93
68B.12X13 68B.1/2x9/16 25 x 25 9,3 155,0 156
68B.14X15 25 x 30 10,5 173,5 240
68B.16X18 68B.5/8x11/16 30 x 35 11,5 204,0 310
68B.17X19 68B.3/4x13/16 35 x 40 12,5 233,0 380
68B.21X23 40 x 40 15,0 250,0 420
68B.22X24 68B.7/8x15/16 40 x 40 13,5 250,0 420
F B x B' C L D
A mm mm mm mm g
68B.6X7H 14 x 16 6,5 110,0 70
68B.8X9H 16 x 19 7,8 120,0 72
68B.10X11H 19 x 22 8,3 130,0 93
68B.12X13H 25 x 25 9,3 155,0 156
68B.14X15H 25 x 30 10,5 173,5 240
68B.16X18H 30 x 35 11,5 204,0 310
68B.17X19H 35 x 40 12,5 233,0 380
68B.21X23H 40 x 40 15,0 250,0 420
68B.22X24H 40 x 40 15,0 250,0 420
GENERAL TOOLING
RING WRENCHES
3 D
F FU
mm/" kg
68B.JE6T N.38A-6B 8 x 9 - 10 x 11 - 12 x 13 - 14 x 15 - 16 x 18 - 17 x 19 1,3
68B.JU6T N.38A-6B 1/4 x 5/16 - 3/8 x 7/16 - 1/2 x 9/16 - 5/8 x 11/16 - 3/4 x 13/16 - 7/8 x 15/16 1,45
68BH.JE6T N.38A-6B 8 x 9 - 10 x 11 - 12 x 13 - 14 x 15 - 16 x 18 - 17 x 19 1,3
Compatible with
+ the Facom modular
storage system
B x B' C L D
F
mm mm mm g
68TX.6X8 16 x 19 8,8 120 68
68TX.10X12 25 x 25 10,5 155 138
68TX.14X18 30 x 35 12,5 204 284
GENERAL TOOLING
•Facom OGV® 6 and 12-point profiles extend contactarea Angle and through-hole design accommodates threaded
while reducing stress. rods or a bar for extra leverage, without affecting wrench
• Increased torque. strength.
• Longer tool life. Deep recess at one end and open-end socket at the other
fit over protruding studs.
• Protected fastener corners.
STANDARD SERIES
▼ 75 FORGED METRIC AND INCH 6 X 6 POINT OGVJ ANGLED OPEN-SOCKET WRENCHES
WISO 2236, NF E 74-303
• Satin chrome finish.
F F B C P D H L D
A mm A" mm mm mm mm mm mm g
75.6 75.1/4 10,0 21 6 5,0 15 102 32
75.7 11,0 22 7 5,0 17 106 35
75.8 75.5/16 12,5 25 8 7,0 19 114 60
75.9 13,5 26 9 7,0 20 122 65
75.10 75.3/8 15,0 28 10 8,0 24 129 95
75.11 75.7/16 16,5 30 11 8,0 25 136 114
75.12 18,0 36 12 9,0 28 144 152
75.13 75.1/2 19,5 38 13 9,0 30 152 175
75.14 21,0 40 14 10,5 32 160 202
75.15 75.9/16 22,5 42 15 10,5 34 169 226
75.16 75.5/8 24,0 46 16 13,0 37 178 285
75.17 25,5 48 17 13,0 39 187 312
75.18 75.11/16 26,5 50 18 13,0 40 195 365
75.19 75.3/4 28,5 51 19 15,0 41 204 430
75.20 29,5 53 20 15,0 43 212 440
75.21 75.13/16 30,5 55 21 15,0 46 221 490
75.22 32,0 57 22 15,0 48 230 536
75.23 75.7/8 33,5 64 23 18,0 51 240 626
75.24 75.15/16 34,5 67 24 18,0 54 250 660
75.25 36,0 69 25 20,0 56 260 785
75.26 75.1' 37,0 70 26 20,0 57 270 795
75.27 38,5 73 27 22,0 58 280 950
75.28 39,5 75 28 22,0 60 290 950
75.29 41,0 76 29 22,0 62 300 1050
75.30 42,0 83 30 24,0 64 310 1300
75.31 43,5 86 30 24,0 70 320 1385
75.32 44,5 88 31 24,0 74 330 1400
75.33 46,0 92 32 27,0 79 340 1480
75.34 47,5 95 33 27,0 80 350 1550
75.35 48,5 96 34 27,0 81 360 1630
75.36 49,5 97 35 27,0 82 370 1700
75.38 52,0 99 37 28,0 85 390 2080
GENERAL TOOLING
3 D
F H T
mm/" kg
75.JN8 • 8 - 10 - 11 - 13 - 17 - 19 - 22 - 24 2,37
75.JN10 • 8 - 10 - 11 - 12 - 13 - 14 - 16 - 17 - 18 - 19 2,16
75.J12 • 7 - 8 - 10 - 11 - 12 - 13 - 16 - 17 - 18 - 19 - 22 - 24 3,39
75.JE16 • 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 21 - 22 - 23 - 24 4,7
75.JU10 • 5/16 - 3/8 - 7/16 - 1/2 - 9/16 - 5/8 - 11/16 - 3/4 - 13/16 - 7/8 2,76
75.P22M • 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 21 - 22 - 23 - 24 - 26 - 27 - 28 - 29 - 30 - 32 13,34
Compatible with
+ the Facom modular
storage system
F B C P D H L D F B C P D H L D
A mm mm mm mm mm mm mm g A mm mm mm mm mm mm mm g
76.6 10,0 23 6 5,0 16 102 32 76.22 32,0 60 22 15,0 48 230 535
76.7 11,0 24 7 5,0 17 106 41 76.23 33,5 67 23 18,0 51 240 625
76.8 12,5 27 8 7,0 19 114 60 76.24 34,5 70 24 18,0 54 250 660
76.9 13,5 28 9 7,0 20 122 65 76.25 36,0 72 25 20,0 56 260 785
76.10 15,0 30 10 8,0 24 129 95 76.26 37,0 73 26 20,0 57 270 795
76.11 16,5 32 11 8,0 25 136 114 76.27 38,0 77 27 22,0 58 280 950
76.12 18,0 38 11 9,0 28 144 152 76.28 39,5 79 28 22,0 60 290 950
76.13 19,5 40 12 9,0 30 152 175 76.29 41,0 80 29 22,0 62 300 1050
76.14 21,0 42 13 10,5 32 160 200 76.30 42,0 87 30 24,0 64 310 1300
76.15 22,5 44 14 10,5 34 169 225 76.31 43,5 90 30 24,0 70 320 1385
76.16 24,0 49 16 13,0 37 178 285 76.32 44,5 92 31 24,0 74 330 1400
76.17 25,5 51 17 13,0 39 187 312 76.33 46,0 96 32 27,0 79 340 1480
76.18 26,5 53 18 13,0 40 195 365 76.34 47,0 99 33 27,0 80 350 1550
76.19 28,5 54 19 15,0 41 204 430 76.35 48,5 100 34 27,0 81 360 1630
76.20 29,5 56 20 15,0 43 212 440 76.36 49,5 101 35 27,0 82 370 1700
76.21 30,5 58 21 15,0 46 221 490 76.38 52,0 103 37 28,0 85 390 2080
GENERAL TOOLING
3 D
F H T
mm/" kg
76.JN8 • 8 - 10 - 11 - 13 - 17 - 19 - 22 - 24 2,37
76.JN10 • 8 - 10 - 11 - 12 - 13 - 14 - 16 - 17 - 18 - 19 2,16
76.JE16 • 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 21 - 22 - 23 - 24 4,7
76.P22M • 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 21 - 22 - 23 - 24 - 26 - 27 - 28 - 29 - 30 - 32 13,34
C
D
F Suitable B C D L D F Suitable B C D L D
A mm bar mm mm mm mm g A mm bar mm mm mm mm g
92A.4 160A.1 6,3 23,5 16,5 95 20 92A.17 160A.1 24,5 55 35 145 200
92A.5 160A.1 8,8 23,5 16,5 95 20 92A.18 160A.1 25,8 61 39 154 225
92A.5,5 160A.1 9,3 25 18 95 25 92A.19 160A.1 27 61 39 154 230
92A.6 160A.1 9,9 26,5 17,5 100 30 92A.20 160A.1 29,1 66,5 41,5 163 320
92A.7 160A.1 11,1 28,5 19,5 100 30 92A.21 160A.1 30,3 67,5 41,5 163 325
92A.8 160A.1 12,7 31,5 20,5 109 48 92A.22 160A.1 31,4 68 42 172 350
92A.9 160A.1 13,9 33 22 109 46 92A.23 160A.1 32,5 72,5 46,5 172 390
92A.10 160A.1 15,5 36,5 23,5 118 68 92A.24 160A.2 33,7 74,5 45,5 180 415
92A.11 160A.1 16,7 36,5 23,5 118 70 92A.27 160A.2 or 160A.3 38,2 81 49 190 520
92A.12 160A.1 18,9 43 27 127 100 92A.30 160A.2 or 160A.3 41,8 86,5 53,5 205 640
92A.13 160A.1 19,5 43 27 127 110 92A.32 160A.2 or 160A.3 44,5 93 57 215 785
92A.14 160A.1 21,2 49 31 136 155
92A.15 160A.1 22,3 49 31 136 160
92A.16 160A.1 23,4 55 35 145 190
3 D
F H T
mm kg
92A.JE8 • 8-10-11-13-17-19-22-24 1,485
92A.P8M • 8-10-11-13-17-19-22-24 1,875
8-9-10-11-12-13-14-15-16-17-18-19-21-22-
92A.P16M • 4
23-24
GENERAL TOOLING
F Suitable D1 x D2 d L D
A mm bar mm mm mm g
97.6X7 160A.1 9,5 x 10,7 4,0 110 32
97.8X9 160A.1 12,5 x 14,0 4,0 120 48
97.10X11 160A.1 15,0 x 16,0 6,0 130 66
97.12X13 160A.1 17,5 x 19,0 6,0 140 106
97.14X15 160A.1 20,0 x 21,5 6,5 150 138
97.16X17 160A.1 22,7 x 24,0 8,2 160 188
97.18X19 160A.1 25,2 x 26,5 8,2 170 238
97.20X22 160A.1 27,7 x 30,2 10,2 180 262
97.21X23 160A.1 29,0 x 31,2 10,2 185 294
97.24X26 160A.2 or 160A.3 33,0 x 35,5 12,5 190 416
97.25X28 160A.2 or 160A.3 34,5 x 38,0 12,5 195 442
97.27X29 160A.2 or 160A.3 37,0 x 39,5 12,5 200 504
97.30X32 160A.2 or 160A.3 40,5 x 43,0 12,5 200 630
d5 d4 d3 d2 d1
Shape d1 d2 d3 d4 d5 L D
F
1 2 mm mm mm mm mm mm g
160A.1 • 3,8 5,25 9 7,4 6,25 220 80 L
160A.2 • 10,75 12,25 13 - - 300 280 d3
160A.3 • 12,25 14,25 18 - - 350 380 d2 d1
GENERAL TOOLING
SOCKET WRENCHES
HINGED SERIES
▼ 66A METRIC AND INCH HINGED SOCKET WRENCHES
W Strengh to ISO 1711-1, DIN 899, NF ISO 1711-1.
• Spring-steadied pivoting 12-point OGVJ socket.
• Satin chrome finish.
D
F FU H 3 mm/"
kg
66A.JE6 • 8x9-10x11-12x13-14x15-16x17-18x19 1,3
66A.JE9 • 6x7-8x9-10x11-12x13-14x15-16x17-18x19-20x22-21x23 2,45
66A.JU3 • 3/8x7/16-1/2x9/16-5/8x3/4 0,67
66A.JE6T N.38A-6B 8 x 9 - 10 x 11 - 12 x 13 - 14 x 15 - 16 x 17 - 18 x 19 1,4
6 x 7 - 8 x 9 - 10 x 11 - 12 x 13 - 14 x 15 - 16 x 17 -
66A.JE9T N.38A-9B 2,55
18 x 19 - 20 x 22 - 21 x 23
Compatible with
+ the Facom modular
storage system
D
F Comprising Plateau Tray
kg
MOD.66A-1 66A.6x7- 8x9 - 10x11 - 12x13 - 14x15
PL.319
- 16x17 PL.319 0,94
MOD.66A-2 66A.18x19 - 20x22 - 21x23 PL.320 PL.319 1,6
GENERAL TOOLING
SOCKET WRENCHES
D
F H T 3 mm
kg
99C.JE12 • 7 ; 8 ; 9 ; 10 ; 11 ; 12 ; 13 ; 14 ; 16 ; 17 ; 18 ; 19 4,55
99C.JE8 • 8 ; 9 ; 10 ; 11 ; 12 ; 13 ; 14 ; 17 2,84
99C.P12E • 7 ; 8 ; 9 ; 10 ; 11 ; 12 ; 13 ; 14 ; 16 ; 17 ; 18 ; 19 6,85
99C.P8E • 8 ; 9 ; 10 ; 11 ; 12 ; 13 ; 14 ; 17 5,2
GENERAL TOOLING
SOCKET WRENCHES
3 D
F FU S
mm kg
74.JL9 N.38A-10D 3,2 - 4 - 5 - 5,5 - 6 - 7 - 8 - 9 - 10 1,00
74.JL14 • 3,2 - 4 - 4,5 - 5 - 5,5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 1,69
74.P14E • 3,2 - 4 - 4,5 - 5 - 5,5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 1,81
A E B C D L D A E B C D L D
F F
mm mm mm mm mm mm g mm mm mm mm mm mm g
74T.5 5 85 8 25 130 160 80 74T.10 10 85 14 50 130 160 125
74T.5,5 5,5 85 9 30 130 160 85 74T.11 11 85 16 50 130 160 130
74T.6 6 85 9 35 130 160 100 74T.12 12 85 18 50 130 160 132
74T.7 7 85 11 35 130 160 115 74T.13 13 85 19 55 130 160 135
74T.8 8 85 12 50 130 160 120 74T.14 14 85 20 55 130 160 138
74T.9 9 85 13 50 130 160 120
A B C E L D A B C E L D
F F
mm mm mm mm mm g mm mm mm mm mm g
94A.3,2 3,2 7 125 25 225 70 94A.9 9 11 125 28 235 160
94A.4 4 7 125 25 225 75 94A.10 10 13 125 32 245 165
94A.5 5 7 125 25 225 80 94A.11 11 13 125 32 245 245
94A.5,5 5,5 7 125 25 225 100 94A.12 12 16 125 39 260 260
94A.6 6 9 125 28 235 110 94A.13 13 16 125 39 260 275
94A.7 7 9 125 28 235 125 94A.14 14 18 125 39 260 280
94A.8 8 11 125 28 235 152
3 D
F FU
mm kg
94A.JL9 N.38A-10D 3,2-4-5-5,5-6-7-8-9-10 1,2
94A.JE13T N.38A-14A 3,2-4-5-5,5-6-7-8-9-10-11-12-13-14 2,295
GENERAL TOOLING
RATCHET SERIES
Positioning is straightforward, even Torque is applied over all six flats Ratchet action without wrench
with little clearance around the pipe. for optimum drive.. removal completes work five times
faster than with a conventional tool.
F B C L D F B C L D
A mm mm mm mm g A mm mm mm mm g
70A.7 25,4 7,1 137,5 75 70A.17 33,5 9,6 184,0 135
70A.8 25,4 7,1 137,5 75 70A.18 33,5 9,6 184,0 135
70A.9 25,4 7,1 137,5 73 70A.19 33,5 9,6 184,0 130
70A.10 25,4 7,1 137,5 73 70A.22 42,4 11,2 237,5 260
70A.11 25,4 7,1 137,5 73 70A.24 42,4 12,9 237,5 260
70A.12 25,4 7,1 137,5 70 70A.27 55,8 14,2 346,0 505
70A.13 25,4 7,1 137,5 70 70A.30 55,8 14,2 346,0 480
70A.14 33,5 9,6 184,0 140 70A.32 55,8 14,2 346,0 470
70A.16 33,5 9,6 184,0 140
3 D
F FU H
mm g
70A.JN6 • 8 - 10 - 11 - 13 - 17 - 19 560
70A.JE7T N.38A-7B 7 - 8 - 9 - 10 - 11 - 12 - 13 550
70A.JE5T N.38A-5A 14 - 16 - 17 - 18 - 19 720
GENERAL TOOLING
STANDARD SERIES
▼ 43 FLANGED FLARE-NUT WRENCHES
• Metric sizes from 7 to 19 mm.
• Flange strengthened 6-point split ring for use on
stubborn fittings such as seized pipe unions.
• Short shank for easier handling.
• Chrome finish.
F B x B' C D x D' L D
A mm mm mm mm mm g
43.7X9 15,6 x 18,3 10,0 5,0 x 6,6 124 38
43.8X10 16,6 x 19,1 10,0 5,9 x 7,4 124 40
43.10X11 19,1 x 20,0 10,0 7,4 x 8,1 124 43
43.11X13 20,0 x 22,9 11,5 8,1 x 9,5 143 63
43.12X14 22,3 x 24,6 11,5 8,9 x 10,3 143 66
43.17X19 28,3 x 31,4 13,0 12,6 x 14,1 162 100
3 D
F FU
mm g
43.JE5T N.38A-5B 7x9-8x10-11x13-12x14-17x19 330
3 D
F FU
mm g
42.JE5T N.38A-5A 8x10-11x13-12x14-17x19-22x24 770
GENERAL TOOLING
VARIABLE-OPENING WRENCHES
A max B C D L D
F
mm mm mm mm mm kg
105.230 60 34 10 17 230 0,480
105.280 70 45 11 20 280 0,810
105.375 80 45 13 22 375 1,440
LOCKING SERIES
▼ LOCK-GRIP WRENCH
114.8
• Lightweight, compact and versatile tool giving a
powerful lock on hexagon heads.
• The smooth jaws are ideal for components which
should not be marked.
D: 300 g.
GENERAL TOOLING
VARIABLE-OPENING WRENCHES
ADJUSTABLE WRENCHES
113A NEW
p PURPOSEFUL
• Head angled at 15° for easier repositioning.
• Tapered jaw tips for optimum access.
p VERSATILE
• Millimetre graduations:
– Reading measurements.
– Wrench presetting
• Non-protruding moving jaw at
maximum capacity.
p POWERFUL
Nm • Performance to
• ISO 6787, DIN 3117 - NF E 74-324.
113
• ASME B 107.8m-1996 (US. nat.std)
ISO 6787
p ERGONOMIC
GENERAL TOOLING
VARIABLE-OPENING WRENCHES
ADJUSTABLE SERIES
▼ 113A.C CHROMED ADJUSTABLE WRENCHES
W Strength to ISO 6787, DIN 3117, NF E 74-324 -
ASME B 107.8 m-1966 (US nat.std)
• Chromed body and polished jaw faces.
• Contoured handle ensures increased ease of use.
• Easier to reach worm screw. NEW
• Tapered jaw tips for optimum access.
• Non-protruding moving jaw at maximum capacity.
• Millimetre graduations for pre-setting jaw opening.
• Worm rotates clockwise.
• Sizes from 4" to 24".
• Patent applied for.
A B C D E F G H J K L D
F
mm mm mm mm mm mm mm mm mm mm mm g
113A.4C 13 13 34 11 14 9,5 4,5 5 6,5 5 114 65
113A.6C 20 19 45 14,8 18,5 11,8 5 6 8,3 5,8 155 125
113A.8C 27 24 61,5 18,5 24 13,5 6,5 9 11 8,5 206 275
113A.10C 30 29 69,5 21,5 28,5 15,5 9 9,5 12,7 10 255 480
113A.12C 34 34 80 25 31 18 10 10,2 13 10 306 700
113A.15C 44 44 97 28 35 20 13,5 12 14,8 11,5 380 1146
113A.18C 53 53 115 31 38,5 22,5 16 14,3 17,8 13,5 456 1792
113.24C 62 61 132 42 38 31 17 17 15 15 612 3265
+ Ergonomics
A B C D E F G H J K L M N D
F
mm mm mm mm mm mm mm mm mm mm mm mm mm g
113A.4CG 13 13 34 11 18,5 9,5 4,5 5 9,5 6 116 65,5 65 75
113A.6CG 20 19 45 14,8 24 11,8 5 6 12 8 159 90,5 80 140
113A.8CG 27 24 61,5 18,5 31 13,5 6,5 9 14,5 10 209 123 109 310
113A.10CG 30 29 69,5 21,5 36,5 15,5 9 9,5 17,5 12,5 259 157,5 140 510
113A.12CG 34 34 80 25 39,5 18 10,1 10,2 19,5 14 310 189,5 169,5 740
GENERAL TOOLING
VARIABLE-OPENING WRENCHES
A B C D E F G H J K L D
F
mm mm mm mm mm mm mm mm mm mm mm g
113A.4T 13 13 34 11 14 9,5 4,5 5 6,5 5 114 65
113A.6T 20 19 45 14,8 18,5 11,8 5 6 8,3 5,8 155 125
113A.8T 27 24 61,5 18,5 24 13,5 6,5 9 11 8,5 206 275
113A.10T 30 29 69,5 21,5 28,5 15,5 9 9,5 12,7 10 255 480
113A.12T 34 34 80 25 31 18 10 10,2 13 10 306 700
113A.15T 44 44 97 28 35 20 13,5 12 14,8 11,5 380 1146
113A.18T 53 53 115 31 38,5 22,5 16 14,3 17,8 13,5 456 1792
113.24T 62 61 132 42 38 31 17 17 15 15 612 3265
+ Ergonomics
A B C D E F G H J K L M N D
F
mm mm mm mm mm mm mm mm mm mm mm mm mm g
113A.4TG 13 13 34 11 18,5 9,5 4,5 5 9,5 6 116 65,5 65 75
113A.6TG 20 19 45 14,8 24 11,8 5 6 12 8 159 90,5 80 140
113A.8TG 27 24 61,5 18,5 31 13,5 6,5 9 14,5 10 209 123 109 310
113A.10TG 30 29 69,5 21,5 36,5 15,5 9 9,5 17,5 12,5 259 157,5 140 510
113A.12TG 34 34 80 25 39,5 18 10,1 10,2 19,5 14 310 189,5 169,5 740
GENERAL TOOLING
( A H L D
F
mm mm mm mm kg
125A.35 15 - 35 5 3,0 168 0,08
125A.50 35 - 50 6 4,0 202 0,17
125A.80 50 - 80 8 5,0 280 0,38
125A.120 80 - 120 9 5,5 345 0,7
125A.180 120 - 180 11 7,5 492 1,48
( A B L D
F
mm mm mm mm kg
115A.50 10 - 50 4 7,5 215 340
115A.100 20 - 100 5 8,0 360 800
115A.200 30 - 200 7 10,0 550 1860
( A D L D
F
mm mm mm mm kg
119.3/8 120 - 224 9,5 26 610 3,16
119.3/4 220 - 324 19 33 650 5,9
GENERAL TOOLING
( D A L D
F
mm mm mm mm kg
126A.35 15 - 35 3 10 168 0,08
126A.50 35 - 50 4 12 202 0,17
126A.80 50 - 80 5 14 280 0,36
126A.120 80 - 120 6 18 345 0,7
126A.180 120 - 180 8 20 492 1,44
( D A L D
F
mm mm mm mm kg
116.50 0 - 50 2,5 - 4 8 210 0,38
116.100 0 - 100 4-6 12 360 0,82
116.200 35 - 200 6-8 16 550 1,96
d D
F For wrench
mm g
116.50E1 116.50 2,5 6
116.50E2 116.50 4,0 6
116.100E1 116.100 4,0 15
116.100E2 116.100 6,0 16
116.200E1 116.200 6,0 36
116.200E2 116.200 8,0 36
GENERAL TOOLING
Length Capacity D
F
mm mm g
117.B 245 20 - 100 530
d1 - d2 D
F
mm g
117.E1 2,5 - 4 16
117.E2 6,0 - 8 24
117.E3 3,0 - 5 17
117.E4 7,0 - 9 27
A D
F
mm g
118.EC4 4 11
118.EC5 5 12
118.EC6 6 14
118.EC8 8 17
GENERAL TOOLING
SLOGGING WRENCHES
RING SERIES
▼ 50 METRIC AND INCH SLOGGING RING WRENCHES
• 12-point ring, giving 30° increments.
• For use with a sledge or air hammer for tightenning
or loosening fasteners on heavy equipment.
• Forged in high impact-strength steel.
• Paint finish.
BxC L D
F
mm mm kg BxC L D
F
50.24 50,0 x 18 170 0,548 mm mm kg
50.27 50,0 x 18 170 0,524 50.56 102,0 x 30 275 2,805
50.30 50,0 x 18 170 0,502 50.57-2'1/4 102,0 x 30 275 2,727
50.32 62,0 x 21 190 0,880 50.58 102,0 x 30 275 2,807
50.34 62,0 x 21 190 0,873 50.59 102,0 x 30 275 2,724
50.35 62,0 x 21 190 0,852 50.60-2'3/8 102,0 x 30 275 2,761
50.36 62,0 x 21 190 0,826 50.65-2'9/16 102,0 x 30 275 2,553
50.38 62,0 x 21 190 0,800 50.67-2'5/8 102,0 x 30 275 4,346
50.40 72,0 x 24 209 1,452 50.70-2'/4 102,0 x 30 275 4,221
50.41-1'5/8 72,0 x 24 209 1,418 50.75-2'15/16 102,0 x 30 275 4,068
50.42 72,0 x 24 209 1,277 50.76-3 102,0 x 30 275 3,962
50.43-1'11/16 72,0 x 24 209 1,319 50.78 142,0 x 38 358 6,440
50.44 72,0 x 24 209 1,264 50.80 142,0 x 38 358 6,301
50.45-1'13/16 72,0 x 24 209 1,274 50.85 142,0 x 38 358 6,041
50.46 87,5 x 28 238 2,145 50.90 142,0 x 38 358 5,750
50.47 87,5 x 28 238 2,146 50.95 142,0 x 38 358 9,245
50.48 87,5 x 28 238 2,186 50.100 142,0 x 38 358 8,946
50.50 87,5 x 28 238 2,072 50.105 142,0 x 38 358 8,705
50.52 87,5 x 28 238 2,030 50.110 142,0 x 38 358 14,633
50.54 87,5 x 28 238 2,015 50.115 142,0 x 38 358 13,941
50.55 102,0 x 30 275 2,969 50.120 142,0 x 38 358 13,698