Professional Documents
Culture Documents
§]
Use a thickness gauge (3) to check that the distance between
Impeller ( I) and sealing ring (2) is 0.56 +- 1.08 mm.
Also check that there are no cracks in pump body. Ifthere are,
replace the whole water pump.
543250 lhermostat
Fig1.!re L90
_ Figure IJI
~~-lA
B
WATER PUMP CROSS SECTION A. Stroke start 79° ± 2 0C.
I. Pump body - 2. Bearing locking screw - 3. Flange - B. Stroke at 94° ~ 7 mm
4. Pump driving shaft complete with bearing - 5. Sealing Stroke at I I0°::; I0.5 mm
ring - 6. Impeller - 7. Pump body gasket The stroke of 0.1 within less than IS"
Water blow-by with thermostat and valve closed
=
A 0.56 +- 1.08 mm; assembly clearance between impeller ::;2UH
and sealing gasket for water pump body.
46 New Daily K
•
I [ Figure 23
•
DYNAMIC LOAD
2246 flex. 4,206 mm/l 00 Kg
108.9 182.7
CAMBER mm
15 - 46