Professional Documents
Culture Documents
difficult?
Select one:
a. high octane number
b. sulphur and asphaltene content
c. water and ash content
d. high cetane number
Feedback
Question 2
Not answered
Marked out of 1.00
Flag question
Question text
Engines using heavy fuels requires heating of the fuel so that the viscosity at the injector is:
Select one:
a. 200 SSU±50
b. 150 SSU or slightly higher
c. 100 SSU or less
d. around 200 SSU
Feedback
Question 3
Not answered
Marked out of 1.00
Flag question
Question text
Select one:
a. stack temperature and CO2
b. stack temperature and CO
c. over-the-fire-draft and CO
d. Ringelman chart and CO2
Feedback
Question 4
Not answered
Marked out of 1.00
Flag question
Question text
Select one:
a. Ultimate analysis
b. analysis
c. Lower heating value
d. Higher heating value
Feedback
Question 5
Not answered
Marked out of 1.00
Flag question
Question text
Select one:
a. 0.1%
b. 0.15%
c. 0.2%
d. 0.5%
Feedback
Question 6
Not answered
Marked out of 1.00
Flag question
Question text
The minimum amount of air required for a complete combustion of fuel is called
Select one:
a. 110% air
b. 90% air
c. excess air
d. theoretical air
Feedback
Question 7
Not answered
Marked out of 1.00
Flag question
Question text
Amount of heat liberated by the complete combustion of a unit weight or volume of fuel is:
Select one:
a. heating value
b. latent heat
c. work or compression
d. sensible heat
Feedback
Question 8
Not answered
Marked out of 1.00
Flag question
Question text
Select one:
a. 90% carbon, 10% hydrogen
b. 85% carbon, 15% hydrogen
c. 80% carbon, 20% hydrogen
d. 70% carbon, 30% hydrogen
Feedback
Flag question
Question text
What are the immediate undesirable products from the petroleum-based lubricating oil
when subjected to high pressure and temperature?
Select one:
a. sulfur
b. carbon residue
c. soots and ashes
d. gums, resins, and acids
Feedback
Question 10
Not answered
Marked out of 1.00
Flag question
Question text
Select one:
a. Fuel index
b. Octane number
c. Diesel index
d. Cetane number
Feedback
The correct answer is: Diesel index
Question 11
Not answered
Marked out of 1.00
Flag question
Question text
What type of lubricating oils are produced entirely from the crudes chosen through
elimination of undesired constituents by suitable refining processes?
Select one:
a. additives
b. premium
c. straight
d. inert
Feedback
Question 12
Not answered
Marked out of 1.00
Flag question
Question text
Ash is introduced into the crucible at an elevated temperature and held at that temperature
until it becomes uniformly fluid and decomposition gases have been expelled, this
temperature is usually in the range of:
Select one:
a. 2800-3000°F
b. None of the above
c. 2400-2600°F
d. 2600-2800°F
Feedback
Question 13
Not answered
Marked out of 1.00
Flag question
Question text
The viscosity of most commercially available petroleum lubricating oil changes rapidly
above:
Select one:
a. 180°F
b. 130°F
c. 150°F
d. 120°F
Feedback
Question 14
Not answered
Marked out of 1.00
Flag question
Question text
The carbon dioxide percentage in the flue gases for perfect combustion of a fuel oil
compared to coal and based on the same excess air percentage of each is:
Select one:
a. the same
b. higher
c. not uniquely determined by the above conditions
d. lower
Feedback
Question 15
Not answered
Marked out of 1.00
Flag question
Question text
Select one:
a. CO, carbon monoxide, excess oxygen
b. Ash, moisture, volatile, fixed carbon
c. Carbon, hydrogen, oxygen
d. Hydrogen, oxygen, moisture
Feedback
Question 16
Not answered
Marked out of 1.00
Flag question
Question text
The gas from sludge digestion tanks is mainly composed of:
Select one:
a. methane
b. hydrogen sulfide
c. carbon dioxide
d. nitrogen
Feedback
Question 17
Not answered
Marked out of 1.00
Flag question
Question text
The determination of moisture, volatile matter, fixed carbon and ash in coal:
Select one:
a. proximate analysis
b. Dulong's analysis
c. ultimate analysis
d. dialysis
Feedback
Question 18
Not answered
Marked out of 1.00
Flag question
Question text
It Is the admittance of oil between two surfaces that are in contact and in relative motion to
one another:
Select one:
a. injection
b. supercharging
c. scavenging
d. lubrication
Feedback
Question 19
Not answered
Marked out of 1.00
Flag question
Question text
Under saturated condition, what is the lowest point at which fuel starts to flow.
Select one:
a. Flash point
b. Pour point
c. Porosity point
d. Stagnation point
Feedback
Question 20
Not answered
Marked out of 1.00
Flag question
Question text
Select one:
a. breeching
b. draft
c. stack
d. chimney
Feedback
Question 21
Not answered
Marked out of 1.00
Flag question
Question text
The heating value obtained when the water in the products of combustion is in the liquid
state:
Select one:
a. calorific value
b. higher heating value
c. lower heating value
d. average heat value
Feedback
Flag question
Question text
Select one:
a. C3H8
b. C2H402
c. C4H10
d. C2H5CI
Feedback
Question 23
Not answered
Marked out of 1.00
Flag question
Question text
A property of lubricating oil that measures the thickness of the oil and will help determine
how long oil will flow at a given temp. is known as
Select one:
a. viscosity
b. fire pt.
c. flash pt.
d. cloud pt.
Feedback
The correct answer is: viscosity
Question 24
Not answered
Marked out of 1.00
Flag question
Question text
If the composition of hydrocarbon fuel is known, the ratio between the nitrogen and oxygen
that is supplied in air is
Select one:
a. intensity
b. equal
c. constant
d. fixed
Feedback
Question 25
Not answered
Marked out of 1.00
Flag question
Question text
Select one:
a. The temperature at which paraffin and waxes in oil start precipitating.
b. The level of impurities beyond which oil ceases to flow
c. The point of maximum contamination of oil
d. The temperature at which oil solidifies
Feedback
The correct answer is: The temperature at which paraffin and waxes in oil start precipitating.
Question 26
Not answered
Marked out of 1.00
Flag question
Question text
Select one:
a. humidification
b. ultimate analysis
c. neutralization
d. work of compression
Feedback
Question 27
Not answered
Marked out of 1.00
Flag question
Question text
The spent cooking liquor containing the lignin dissolved from the wood is called:
Select one:
a. hard liquor
b. inorganic salts
c. soda liquor
d. none of the above
Feedback
Question 28
Not answered
Marked out of 1.00
Flag question
Question text
When fuel oil has a high viscosity, we mean that the fuel oil will:
Select one:
a. flow slowly through pipes
b. have a low specific gravity
c. evaporate easily
d. bum without smoke
Feedback
Question 29
Not answered
Marked out of 1.00
Flag question
Question text
Select one:
a. 1 mol carbon monoxide
b. 1 mol carbon and 1 mol carbon dioxide
c. 1 mol carbon dioxide
d. 2 mols carbon dioxide
Feedback
Question 30
Not answered
Marked out of 1.00
Flag question
Question text
Select one:
a. pour point
b. flash point
c. fire point
d. diesel index
Feedback
Question 31
Not answered
Marked out of 1.00
Flag question
Question text
Select one:
a. forced draft fan failure
b. too lean fuel mixture
c. dirty burner cup
d. gas baffle broke
Feedback
Question 32
Not answered
Marked out of 1.00
Flag question
Question text
An orsat analysis of a flue gas shows CO2 = 12; 02 = 5; CO = 0.0. This analysis can be
interpreted as follows:
Select one:
a. the analysis is probably correct
b. no excess air was used in the combustion
c. the analysis is in error since the terms do not add or 100
d. more air would have produced better combustion
Feedback
Question 33
Not answered
Marked out of 1.00
Flag question
Question text
The indicator used to determine the anti-knock characteristics of gasoline:
Select one:
a. Octane No.
b. Diesel Index
c. Cetane No.
d. Aniline point
Feedback
Question 34
Not answered
Marked out of 1.00
Flag question
Question text
Select one:
a. viscosity
b. does not indicate qualities
c. qualities
d. does not indicate contamination
Feedback
Question 35
Not answered
Marked out of 1.00
Flag question
Question text
Select one:
a. Proximate analysis
b. Ultimate analysis
c. Orsat analysis
d. none of the above
Feedback
Question 36
Not answered
Marked out of 1.00
Flag question
Question text
The temperature at which oil gives off vapor that burns temporarily when ignited:
Select one:
a. wet bulb
b. dew point
c. flash point
d. drop point
Feedback
Question 37
Not answered
Marked out of 1.00
Flag question
Question text
Select one:
a. Carbon monoxide, water and ammonia
b. Carbon dioxide and water
c. Water, carbon monoxide and carbon dioxide
d. Carbon monoxide
Feedback
The correct answer is: Water, carbon monoxide and carbon dioxide
Question 38
Not answered
Marked out of 1.00
Flag question
Question text
A gas which will not be found in the flue gases produced by the complete combustion of
fuel oil is:
Select one:
a. hydrogen
b. carbon dioxide
c. oxygen
d. nitrogen
Feedback
Flag question
Question text
The temperature at which vapors will flare up and then die out:
Select one:
a. flash point
b. fire point
c. pour point
d. boiling point
Feedback
Question 40
Not answered
Marked out of 1.00
Flag question
Question text
Select one:
a. calorimetry
b. calorimeter differential
c. calorimeter
d. calorimeter gas
Feedback
The correct answer is: calorimeter