Professional Documents
Culture Documents
YES
NO
Does initial read work? Check laser circuit.
YES
Check focus circuit.
Check disc.
NO
Does it play? Check tracking servo circuit.
YES
NO
Does it output audio? Check audio circuit.
YES
OK
- 10 -
Fails to initial read
NO
Disc motor turns. NO Does laser light? A
YES
YES B
1.3V
YES YES
YES
Is there no dropout of RF Scratch in disc
NO
signal? initial read area.
Defective pick-up
YES adjustment focus offset.
- 11 -
A Laser does not light.
YES NO
NO NO
Did pickup return to Is data transferred from Defective MICOM.
innermost circular? MICOM IC ?
YES YES
YES
NO
Is power supplied to laser Q801? Defective connector.
(Q 801 collector: about 1.8V)
R801»1.0V YES
YES Defective Q 801 and/or laser.
- 12 -
B Laser lights.
YES
YES
YES
- 13 -
C
YES
NO Defective IC 801.
Open pick diode
YES
ISTAT(SENSE)
YES
YES
Start mode
YES
- 14 -
WAVEFORMS OF MAJOR CHECK POINT
1. HF signal (RF signal ) waveform 2. EFM signal (pin 33 IC 801)waveform
(Test Point TP801) during normal play during Normal Play
0.5V/Div. 2V/Div.
500nS/Div. 500nS/Div.
OV OV
3. Focus coil drive waveform(Pin NO 1 , 2 of IC 803) •Focus coil drive waveform(pin NO 1 , 2 of IC803) and
•When focus search failed or there is no disc on the tray FOK (pin NO 40 of IC 801) when focus search is
accomplished
OV
(CH1)
OV
OV
(CH2)
4. Tracking coil drive waveform (pin NO 26 , 27 of IC 803) CH1 : FOCUS COIL DRIVE
and TEO during track traverse SIGNAL 2V/Div.
CH2 : FOAK
(1) When time division is 20nS/div
(2) When time division 0.5nS/div.
(During forward track traverse)
OV OV
(CH1) (CH1)
OV OV
(CH2) (CH2)
CH1 : TEO(TP801) CH1 : TEO(TP801)
1V/Div.
CH2 : TRACK COIL DRIVE
1V/Div.
CH2 : TRACKING COIL DRIVE
SIGNAL 2V/Div.
SIGNAL 2V/Div.
(3) When time division is 0.5nS/div. 5. Feed motor drive waveform(pin NO 11, 12 of IC 803)
(During backward Track Traverse) During normal play
OV
0.5V/Div.
500nS/Div.
OV
OV
(CH2)
CH1 : TEO(TP801)
1V/Div.
CH2 : TRACKING COIL DRIVE
SIGNAL 2V/Div.
- 15 -