Professional Documents
Culture Documents
Model Question Paper - 2006 National Certification Examination Energy Managers & Energy Auditors
Model Question Paper - 2006 National Certification Examination Energy Managers & Energy Auditors
41 The world average per person energy consumption is equivalent to _____tonnes of coal
a) 3 b) 2.2 c) 4.5 d) 1.0
42 The time between its earliest and latest start time, or between its earliest and latest finish
time of an activity is
a) delay time b) slack time c) critical path d) start time
43 Non contact flow measurements can be carried out by
a) Magnetic flow meter b) Orifice flow meter
c) Ultrasonic flow meter d) Pitot tube
44 Nameplate kW or HP rating of a motor indicates
a) input kW to the motor b) output kW of the motor
c) minimum input kW to the motor d) maximum input kW to the motor
45 The energy used by any manufacturing process varies with
a) production volume b) type of process
c) resource input d) All the above
46 The specific heat of ____ is very high compared to other common substances listed below.
a) Lead b) Mercury c) Water d) Alcohol
47 In a drying process moisture is reduced from 60% to 30%. Initial weight of the material is
200 kg. Calculate the weight of the product.
a) 100 b) 120 c) 130 d) 114.3
48 In force field analysis of energy action-planning, one of the actions below do not fall under
positive force?
1) high price of energy 2) energy efficient technology available
3) top management commitment 4) lack of awareness
49 The predicted raise in mean sea level due to global warming by the year 2100 ____
a) 1 m b) 1 cm c) 2 m d) 9 -88 cm
50 The agency to look after the climate changes and for action to cut GHG ____
a) UNFCCC b) WHO c) DOE d) GOI
Section-II: SHORT QUESTIONS Marks: 5×10 = 50
2 A three phase induction 75 kW motor operates at 55 kW. The measured voltage is 415 V,
current is 80 amps. Calculate the power factor of the motor?
3 What are the few important technical feasibility parameters that one should consider
during analysis of energy conservation opportunities?
5 Describe briefly in three or four lines the actions which you take to bring awareness on
energy management program?
7 Why short term payback is an inadequate yardstick for assessing longer term benefits?
8 What are the different types of contracts involved in project management system.
3 Discuss the procedure followed during energy and mass balance calculation.
5 What are the several types of contracts used in project management and explain in
brief?