Professional Documents
Culture Documents
ASNT Certification Brochure PDF
ASNT Certification Brochure PDF
Qualification Exams
All ASNT NDT Level III candidates must successfully complete both: a Basic Examination, regardless of
the method(s) for which the candidate seeks certification; and a Method Examination, which is given at
the candidate’s request, in one or more of 11 different NDT methods. Once certified, the Basic Examina-
tion need not be retaken unless the certificate holder allows all ASNT NDT Level III certificates to expire.
ASNT NDT Level III
Qualification Exams
Candidates applying for initial certification must take both the general examination and at least one
specific examination in each test method for which certification is sought. Candidates may take the
General Industry or the Pressure Equipment Specific examination, or if they seek certification in both
industry sectors, they may take both sector-specific examinations.
ASNT NDT Level II
IRRSP Exams
ASNT certification is by examination only and consists of a written portion administered by ASNT
and a practical portion administered by an institution recognized by ASNT. The written examination
consists of two categories, RAM and X-ray, which are offered individually or together as a
combination examination. The exams cover the principles, regulations, basic equipment operation,
and safety procedures applicable to the type of radiation producing equipment for which
ASNT IRRSP certification is sought.
Qualification Requirements
To be considered eligible to sit for the ASNT IRRSP Certification Exam, the candidate
must have the following minimum documented training and experience.
ASNT IRRSP
ASNT IRRSP certification is valid for five years from the date that all certification requirements have
been met, unless suspended or revoked for cause.
Central Certification
The ASNT Central Certification Program (ACCP) was developed to improve NDT reliability
by providing standardized requirements administered by an accredited certification body.
The program provides prospective employers with NDT personnel that have achieved a
high level of performance and competency within the NDT profession.
6 Certification in accordance with the guidelines ASNT Recommended Practice No. SNT-TC-1A is
an employer-based system, meaning that the employers are responsible for the qualification and
certification of their own personnel. Central certification is administered and maintained by an
independent body that provides uniform certification requirements for all certificate holders.
Regardless of the certification program, the ultimate responsibility for authorizing a person
to perform NDT remains that of the employer.
8 Qualification Exams
The ASNT Central Certification Program requires the successful completion of examinations in
any of five NDT test methods: Magnetic Particle Testing (MT), Liquid Penetrant Testing (PT),
Ultrasonic Testing (UT), Radiographic Testing (RT), and Visual Testing (VT).
Level II certification can be attained in individual techniques within a test method or may
cover all techniques.
In addition to the prerequisite Level II qualifications and experience, Level III applicants must pass the
following four examinations:
1. The Basic Examination covers knowledge of
certification processes, materials and processes and
general knowledge of other NDT test methods.
ASNT’s International Service
2. The Method Examination covers specific knowledge
of that test method. Center certification staff will
happily assist you with program
9
3. Practical Examination in which applicants are required
to demonstrate their ability to perform the method questions or application information.
on test samples containing known defects.
Note: The Practical examination is waived for
personnel who took the Practical Examination as
an ACCP Level II.
4. Procedure Preparation Examination in which applicants
are required to write an NDT procedure based on a
supplied NDT standard.
Getting Started
Additional information and certification applications are available on ASNT’s website at
www.asnt.org/certification. Here, you can also find information about different method examinations,
exam schedules, refresher courses, and more.
Also, ASNT’s International Service Center certification staff will happily assist you with program
questions or application information. Please contact a member of the Certification and Technical Services
staff team at (800) 222-2768.
Reference Materials for ASNT Certifications
• Codes and Standards
• Recommended Practice No. SNT-TC-1A
• ANSI/ASNT CP-105 The American Society for Nondestructive Testing
ASNT...Creating a Safer World!
• ASNT Standard Topical Outlines for
Qualification of Nondestructive Testing Personnel
www.asnt.org/certification
• ANSI/ASNT CP-189, latest edition 800.222.2768
• ASNT NDT Level III Study Guides
• And more online at www.asnt.org/store