Professional Documents
Culture Documents
2 Types of inclinometers
5 Applications of Inclinometer
6
Encardio-Rite’s models
of inclinometers
1 WHAT IS AN INCLINOMETER?
Inclinometer are used to measure the slope gradient during activities like tunnelling,
excavation and de-watering as such activities affect the ground that supports the
structure.
It contains two sets of spring-pressured wheels that guide the probe accurately at
any depth in the casing.
The spacing between the wheels is usually 0.5m. The measurements are done in the
A-axis i.e. in the direction of the wheels and B-axis i.e. perpendicular to the A-axis.
The probes for horizontal casing are made differently. The sensors are mounted to
measure the vertical displacement while keeping the bottom-tracking wheels fixed.
2 TYPES OF INCLINOMETERS
· Inclinometer Casing
The inclinometer casing is used to guide the probe within the casing with four longi-
tudinal wheel grooves, spaced 90° apart.
Out of these, only one set of the opposite grooves in the expected direction of the
displacement is used.
The casing is generally installed in the ground, within drilled holes and the annular
space grouted. However, there are other installations where the casing is embedded
in concrete structures.
The casing connection seals out soil, grout, and other material while keeping the
grooves clean.
2 TYPES OF INCLINOMETERS
The inclinometer cable reel is attached to the slope gauge probe and readout device.
It is used to transmit electrical signals during measurements and serve as a precise,
repeatable depth control for the probe.
The cable has a distinct design and is constructed to provide long-term longitudinal
stability.
The mobile readout unit is used to record the data at each depth interval. It is capa-
ble of storing multiple data sets and can perform field checks to verify the validity of
the measurements.
2 TYPES OF INCLINOMETERS
In-place inclinometers are further divided into two types - Uniaxial and Bi-axial. The
biaxial in-place tilt indicators consist of a couple of MEMS sensors attached at 90°.
3 How do inclinometers work?
Servo-Accelerometer
MEMS Accelerometer
Acceleration causes deflection of the proof mass from its centre position. There are
32 sets of radial fingers around the four sides of the square proof mass.
By this method, both dynamic acceleration (i.e. shock or vibration) and static accel-
eration (i.e. inclination or rotation) can be sensed.
Signal conditioning is carried out within inclinometers so that a simple output signal
is obtained.
This output can be used in conjunction with a calibration sheet to easily calculate
the amount of tilt that has occurred.
4 INCLINOMETER INSTALLATION PROCEDURE
Vertically
Vertical inclinometers are used for measuring relative horizontal displacements af-
fecting the shape of a guide casing, embedded in the ground or structure.
The clinometer probe is then passed through the entire length of the gauge well
from bottom to top, taking readings at fixed pre-determined intervals.
The bottom end of the guide casing serves as a stable reference (datum) and must
be embedded beyond the displacement zone.
Horizontally
A change in tilt angle is noted and this indicates that the movement has occurred.
The movement is calculated by finding the difference between the current inclination
reading and the initial reading while converting the result to a vertical distance.
5 APPLICATIONS OF INCLINOMETERS
The performance of retaining structures, such as sheet pile walls, soldier pile walls
or mechanically stabilized earth (MSE) systems is adversely affected by lateral pres-
sures or ground movements.
The casing can be installed vertically in boreholes, adjacent to the wall face or can
be embedded within structural elements.
Traversing-type inclinometer probes are usually used to determine the relative shape
of the retaining structure and changes in it over a while.
5 APPLICATIONS OF INCLINOMETERS
Slopes in cuts or fills embankments can be monitored for stability during and after
construction. In such cases, the inclinometer casings are installed inside the bore-
holes, similar to landslide monitoring.
Monitoring Excavations
The impact of excavations is monitored to study its effect on nearby structures, utili-
ties, and other critical facilities.
In such cases, inclinometer casings are placed inside the vertical boreholes located
between the excavation boundary and the nearby facilities.
Inclinometers can be used to monitor stress relief ground movements and possible
displacement of rock blocks during the construction of tunnels and shafts.
Gradient meters are used to verify the adequacy of ground supports, detect potential
flaws in the construction approach, and serve as a warning system for potential
ground failure.
Encardio-Rite's Model EAN-26M is one of the most advanced MEMS digital inclinom-
eter systems.
It uses the capability of high computational power and large high-resolution colour
display of today’s Android mobile phones.
6 ENCARDIO-RITE’S MODELS OF INCLINOMETERS
The mobile phone uses the wireless Bluetooth connection to communicate with the
inclinometer reel unit.
The EAN-26M Inclinometer system is much lighter in weight and is very much liked
by field personnel who have to carry the system from borehole to borehole for log-
ging.
The digital slope gauge system consists of a traversing type digital tilt sensing probe
that is connected to a reel unit kept at borehole top.
The reel unit consists of a winding reel that holds the cable and a wireless Bluetooth
relay unit that sends the digital probe data to the mobile phone.
6 ENCARDIO-RITE’S MODELS OF INCLINOMETERS
The spring-loaded wheel arms help to position the probe centrally inside the access
casing at any required depth.
The probe consists of two precision MEMS accelerometers. One accelerometer has
its axis in the plane of the wheels and other at 900 to it.
The probe senses horizontal deviation between the probe axis and the vertical plane,
simultaneously in both the orthogonal axis
6 ENCARDIO-RITE’S MODELS OF INCLINOMETERS
It also provides the pattern of deformation, zones of potential danger and effective-
ness of construction control measures undertaken.
Its data logging and real-time monitoring feature help to provide early warning in
case of failures.
It also helps in observing the behaviour of ground movement after construction and
indicates potentially dangerous conditions that may adversely affect the stability of
the structure, its foundation and appurtenant.
www.encardio.com