Professional Documents
Culture Documents
Edition 28/09/2015.
Identification no. 14.3.059
Version no. 00
SikaFiber® Force PP-48
Description SikaFiber® Force PP-48 are polypropylene fibers for use in improving concrete and
sprayed concrete.
Uses SikaFiber® Force PP-48 are suitable for use in cast in situ concrete and dry or wet
sprayed concrete.
The main uses of SikaFiber® Force PP-48 are in the following applications:
Fiber reinforced sprayed concrete in tunneling
Carriageway surfacing / resurfacing with fiber reinforced concrete
Foundations with fiber reinforced concrete
Producing concrete surfaces with increased abrasion resistance
With the addition of SikaFiber® Force PP-48, the following improvements in the
hardened concrete characteristics can be achieved:
Increased ductility (energy absorption)
Improved resistance to abrasion and impact
Increased durability
Rust-free surfaces
Advantages The following properties distinguish SikaFiber® Force PP-48:
No minimum concrete cover requirements
Low fiber rebound in shotcreting
Good pumpability
Less wear on the concrete mixing, transport and handling equipment than with
steel fibers
Good chemical resistance (acid and alkali resistant)
No risk of injury as with steel fibers
Protruding fibers are removable by fire
Product Data
Colour White, translucent
Packaging 5 kg boxes - fibres wrapped in water soluble plastic pucks (Parallel Packed) in
biodegradable boxes.
Storage conditions 24 months from date of production if stored properly in the original sealed packaging
in a dry place.
Technical Data
Chemical base Polyolefin
Our local Technical Service Department will be pleased to assist you on your specific
project.
Application Instructions
Other information SikaFiber® Force PP-48 are suitable for combining with the following Sika® products:
Fro-V types
Sigunit® types
SikaFume®-HR/TU
Sikament® types
SikaPump®
SikaRapid®
SikaTard® types
Sika® Frost
Sika® Retarder
Sika® Stabilizer types
Sika® ViscoCrete® types
Preliminary trials are always advisable with additional products / combinations.
Our local Technical Service Department will be pleased to assist you on your specific
project.
Important information The addition of SikaFiber® Force PP-48 can cause a reduction in the concrete
consistence. We recommended correcting this loss not by adding more water, but
by adjusting the mix to the required consistence with a suitable dosage and grade of
Sika® high-range water reducing admixture.
Value Base All technical data stated in this Product Data Sheet are based on laboratory tests.
Actual measured data may vary due to circumstances beyond our control.
Health and Safety For information and advice on the safe handling, storage and disposal of chemical
products, users shall refer to the most recent Material Safety Data Sheet containing
Information physical, ecological, toxicological and other safety-related data.
Disclaimer The information, and, in particular, the recommendations relating to the application and end-use
of Sika products, are given in good faith based on Sika’s current knowledge and experience of
the products when properly stored, handled and applied under normal conditions in accordance
with Sika’s recommendations. In practice, the differences in materials, substrates and actual site
conditions are such that no warranty in respect of merchantability or of fitness for a particular
purpose, nor any liability arising out of any legal relationship whatsoever, can be inferred either
from this information, or from any written recommendations, or from any other advice offered.
The user of the product must test the product’s suitability for the intended application and
purpose. Sika reserves the right to change the properties of its products. The proprietary rights
of third parties must be observed. All orders are accepted subject to our current terms of sale
and delivery. Users must always refer to the most recent issue of the local Product Data Sheet
for the product concerned, copies of which will be supplied on request.