Professional Documents
Culture Documents
FABRICATORS
PRODUCT GUIDE
K0 CLASS
HIGH STRENGTH CLASS 8.8 HR BOLTED ASSEMBLIES COMPLIANT TO THE LATEST STANDARD
AS/NZS 1252:2016 K0 8.8 HR FOR IMPROVED RELIABILITY, PERFORMANCE AND CERTIFICATION
■■ Road & rail bridges. AU - 1300 268 327 NZ - 0800 495 866
TECHNICAL INFORMATION:
■■ For detailed technical information and performance reports
contact your local representative or refer to the
Konnect Fastening Systems® website.
02
AUSTRALIA: 1300 KONNECT (566 632) | www.konnectfasteningsystems.com.au / NEW ZEALAND: 0508 KONNECT (566 632) | www.konnectfasteningsystems.co.nz
KONNECT FASTENING SYSTEMS® – STEEL FABRICATORS PRODUCT GUIDE
K2 CLASS
HIGH CLASS 8.8 HR BOLTED ASSEMBLIES COMPLIANT TO EUROPEAN STANDARD
EN14399:2005 K2 8.8 HR
APPLICATIONS:
■■ Steel frame buildings & warehouses.
■■ Structural steel connections.
■■ Road & rail bridges.
■■ Platforms & walkways.
■■ Shelters & canopies.
K1 CLASS
EXTREME CLASS 10.9 HR BOLTED ASSEMBLIES FOR MAXIMUM ENGINEERING DESIGN,
PERFORMANCE AND SAFETY. COMPLIANT TO EUROPEAN STANDARD EN14399:2005 K1 10.9 HR
HIGH PERFORMANCE BOLTED SYSTEMS THAT MAY REDUCE
STRUCTURE WEIGHT AND INSTALLATION TIME WHEN
COMPARED TO K2 CLASS BOLTED ASSEMBLIES.
■■ Dimensions, materials and mechanical properties are compliant to
AS/NZS1252:2016.
■■ Manufactured with strict document controls for reliability, performance
and safety.
■■ Smaller diameter Class 10.9 assemblies may replace larger diameter
Class 8.8 assemblies.
■■ HR bolt assemblies directly align with the design provisions of
AS4100 for ductility.
■■ Large size range: M16 to M36. Lengths: from 40mm to 500mm.
■■ Finish: Hot dipped galvanised.
■■ Goods supplied to project orders. Lead times may apply.
APPLICATIONS:
■■ Steel frame buildings & warehouses.
■■ Structural steel connections.
■■ Road & rail bridges.
■■ Platforms & walkways.
■■ Shelters & canopies.
TECHNICAL INFORMATION:
■■ For detailed technical information and performance reports contact your local
representative or refer to the Konnect Fastening Systems® website.
03
AUSTRALIA: 1300 KONNECT (566 632) | www.konnectfasteningsystems.com.au / NEW ZEALAND: 0508 KONNECT (566 632) | www.konnectfasteningsystems.co.nz
KONNECT FASTENING SYSTEMS® – STEEL FABRICATORS PRODUCT GUIDE
TECHNICAL SUPPORT
TECHNICAL SUPPORT
■■ Factory Production Control (FPC) inspection certificate.
■■ Initial Type Testing certificate (ITT). European conformity CE certificate.
■■ Tested to latest International and AS/NZS standards.
■■ Verification testing report = Supplier Declaration of Conformance (SDoC).
■■ Verification testing must be completed by an independent ILAC accredited laboratory.
Structural Assembly
Inspection Certificate
Certificate No ABCDEFG Ningbo Jinding Fastening Piece Co., Ltd.
P/O No 123456789 Manufacturer: ISO 9001:2008 Cert No. 00116Q22857R3M/3302
ISO/TS 16949:2009 Cert No. CNT022692
Date issued 2/07/2017
Inspection Ningbo Zhongji Inspection of Machinery Parts Co., Ltd.
Shipment Date 2/07/2017
Organisation: Registration: CNAS L4800 Field of Testing: Mechanical Testing
Testing date 3/07/2017
Manufactured Date 3/07/2017 Customer: Konnect Fastening Systems Assy Lot No: HGFHFGDHF
K Class: K0 Qty shipped: 100,000
Specifications:
18
6/4/20 Set: AS/NZS 1252.1:2016 Part No: 30X100MHSAK0 Markings:
AS/NZS 1252.2:2016
Description: 30X100 HDG Structural Assembly Bolt: 8.8 HR MFG mark
Bolt: AS/NZS 1252.1:2016
Nut: AS/NZS 1252.1:2016 Size: M30 x 100
ity
Washer: AS/NZS 1252.1:2016 Coating: HDG
onform
n of C
Chemical Analysis Assembly Test
laratio
ural Spec Nut Results Spec
Struct Mn % S% P% Ni % Cr % Mo % Clamped
r Dec
Rotation Nut Rotation
of K0 Spec C%
K0 Inspection
(max) Test Length
range
(min) (max) (max) (max) (max) Min° Min°
upplie
ect’s . Certificate.pdf
Konn the ≤ 3d 210 215
ce of Ltd (CGL) Bolt 01 0.15 - 0.4 0.035 0.025 0.025 - - -
ich is
S confirm2 by Cove
mplian
the co ntry Grou
p
8 6701
02) wh 02 0.25 - 0.55 0.035 0.025 0.025 - - - >3d to ≤7d 240 245
nf ormity (D Part 1 an 37 008 67 System Heat No: ABCDEFG 0.40 0.036 0.020 0.020
n of co 1252:2016 ited (A
BN er Fluid Visual & thread inspection
claratio Coop Nut 0.58 max 0.25 0.015 0.06
This de rs to AS/N
ZS oup Lim, Konnect, ed
ntry Gr rs produc Heat No: HIJKLMN 0.42 0.26 0.014 0.02 Section Appearance Thread
fastene Cove ry Fastene ry that
fers to Washer Bolt OK OK
with re ding Cove
nt g facto
acturin
Nut OK OK
” here tra manuf Heat No: QRSTUV 0.46 0.68 0.008 0.014
“CGL tor of the of the
Washer OK
this
proprie T) reports ite ms on
(IT r the Mechanical Properties
testing rts fo
Type ) repo
ation: Initial (FPC Sample Tested Tensile Proof Load Hardness Wedge Tensile
d the
Lot No: Section:
Declar sting tisfying ures size: Method: (Mpa) (kN) (HRC) (MPa)
reviewe ntrol te t. m s sa ed
L has tion Co e produc syste sting proc Min 830 147 23 830
• CG product. Produc oduced th have te Specification
the e Fa ctory
th at pr e products y, including Bolt Max - - 34 -
d th ctory thes rit
s reviewert of the fa prod uced oduct integ AAA 3 AS4291.1 Min 919 28 908
L ha po that in pr Results Max 950 30 940
• CGrification re g fa ctory to mainta
ve turin ce Avg 969 28.9 925
anufac e in pla
the m ocedures ar ments. Min 285.4 24
L and pr uct. require Specification
• CG 001 and rming prod ability ). datory
). Max - 36
ISO9 nconfo d trace ports
(VTR (Man
ing an ng Re Part 2
Nut BBBB 3 AS4291.2 Min 27.6
and no packag n Testi 1 and
d the
Results Max 30
we ica tio 6 Part
revie Verif 52:201 Avg 29.5
CG L has at tached /N ZS 12
• d th e to AS Min 300 HV
oduct
Specification
reviewe this pr
Max 370 HV
L has ce of
• CG mplian
Washer CCCC 8 AS1817.1 Min 310
irms co Results Max 365
L conf Group
Ltd.
• CG ventry
Avg 345
Co
tory of Dimensional Checks Coating Thickness Checks
d signa
thorise Required Measured Required Measured
as the au Sample
Dimensi Dimension
Sample Size
Thickness (µm) Thickness (µm)
Signed
Size
on (mm) (mm)
Bolt 3 50 85.1
Bolts Width across flats 3 50.0 50.0
Nuts 3 50 85.7
GO thread gauge 3 Pass Pass
Washer 3 50 77.1
NO GO thread gauge 3 Pass Pass
rt Bullu
ss p Ltd Width across flats 3 50.0 50.0
Grou Approved:
Robe Coventry Width across corners 3 57.7 57.7
-
CEO Nuts
Nut height 3 Pass Pass
Socket NO GO gauge 3 Pass Pass
For & on behalf of Konnect Fastening Systems
(A division of Coventry Group Ltd ABN 37 008 670 102)
Hole diameter 3 33.0 33.0 Konnect certify that the information given is a true and accurate
Washers Outside diameter 2 58.1 58.1 extract from the above manufacturers test results. This product
hereby complies with AS/NZS 1252.1:2016 and AS/NZS 1252.2:2016.
Thickness/chamfer 3 4.6 4.0
AU: Call 1300 KONNECT (566 632) www.konnnectshop.com NZ: Call 0508 KONNECT (566 632)
04
AUSTRALIA: 1300 KONNECT (566 632) | www.konnectfasteningsystems.com.au / NEW ZEALAND: 0508 KONNECT (566 632) | www.konnectfasteningsystems.co.nz
KONNECT FASTENING SYSTEMS® – STEEL FABRICATORS PRODUCT GUIDE
TECHNICAL PROJECTS
Special thanks to Mirvac for allowing Konnect Fastening Systems® to photograph the construction site. Mirvac will be the developer, builder and a long-term owner of ATP.
Optus Stadium – PERTH, WESTERN AUSTRALIA
65,000 seat multipurpose sporting stadium and entertainment precinct.
Photo Credit – Left: Wood & Grieve Engineers – https://wge.com.au; Top Right & Bottom Right: Optus Stadium – https://optusstadium.com.au
New Zealand International Convention Centre (NZICC) – AUCKLAND, NZ
32,500sqm GFA (Gross Floor Area) floor space. 5 levels with 3,000 people capacity.
05
AUSTRALIA: 1300 KONNECT (566 632) | www.konnectfasteningsystems.com.au / NEW ZEALAND: 0508 KONNECT (566 632) | www.konnectfasteningsystems.co.nz
KONNECT FASTENING SYSTEMS® – STEEL FABRICATORS PRODUCT GUIDE
APPLICATIONS:
■■ Beam to column connections.
■■ Steel trusses, frames & splice plates.
■■ Road & rail bridges.
■■ Rail joints & rivet replacement.
■■ Signs & gantries.
■■ Repair & strengthening of structures.
■■ High rise buildings, tunnels & infrastructure
projects.
TECHNICAL INFORMATION:
■■ For detailed technical information and
performance reports contact your local
representative or refer to the
Konnect Fastening Systems® website.
06
AUSTRALIA: 1300 KONNECT (566 632) | www.konnectfasteningsystems.com.au / NEW ZEALAND: 0508 KONNECT (566 632) | www.konnectfasteningsystems.co.nz
KONNECT FASTENING SYSTEMS® – STEEL FABRICATORS PRODUCT GUIDE
APPLICATIONS:
■■ Beam to column connections.
■■ Steel trusses, frames & splice plates.
■■ Road & rail bridges.
■■ Rail joints & rivet replacement.
■■ Signs & gantries.
■■ Repair & strengthening of structures.
■■ High rise buildings, tunnels & infrastructure projects.
TECHNICAL INFORMATION:
■■ For detailed technical information and
performance reports contact your
local representative or refer to the
Konnect Fastening Systems® website.
ADVANTAGES:
■■ Ensures the function of the joint is maintained.
■■ Reduced maintenance resulting in long term cost savings.
■■ Quick and easy to install and remove with standard tools.
■■ Defined and uniform friction conditions which result in a more
accurate pre-load.
■■ Safe and reliable locking for joints with short clamp.
■■ High corrosion resistance.
■■ Traceable batch codes and markings
■■ Locking function not affected by lubrication
For more technical details refer to your Konnect Fastening Systems® representative.
07
AUSTRALIA: 1300 KONNECT (566 632) | www.konnectfasteningsystems.com.au / NEW ZEALAND: 0508 KONNECT (566 632) | www.konnectfasteningsystems.co.nz
KONNECT FASTENING SYSTEMS® – STEEL FABRICATORS PRODUCT GUIDE
Threaded Rod Structural Assemblies Purlin Bolts Nuts, Bolts & Washers Impact Sockets
Mild steel and high tensile Fully certified structural assemblies High and low tensile purlin Range of high & low tensile nuts, Konnect Fastening Systems® also
threaded rod available in metric to meet your construction assemblies for fastening steel bolts & washers. Available in a carry a range of Impact Sockets –
or imperial and in a range of sizes requirements. Available in purlins. Available in diameters range of finished, types and sizes; to assist with your installation.
& finishes. diameters from 12mm to 36mm from 12mm to 16mm and in a suitable for various applications.
in a variety of lengths, with test length of 30mm.
certificates available.
08
AUSTRALIA: 1300 KONNECT (566 632) | www.konnectfasteningsystems.com.au / NEW ZEALAND: 0508 KONNECT (566 632) | www.konnectfasteningsystems.co.nz
KONNECT FASTENING SYSTEMS® – STEEL FABRICATORS PRODUCT GUIDE
HOLD-DOWN BOLTS
FOR STRUCTURAL AND NON-STRUCTURAL CONNECTIONS OF STEEL COLUMNS AND FRAMES
TO PRECAST CONCRETE FOOTINGS
INDIVIDUAL OR MULTIPLE BOLT OPTIONS WITH STEEL PLATE ASSEMBLIES.
■■ Black or hot dipped galvanised finish. ■■ Total bolt lengths from 300mm to 800mm.
■■ Metric bolt diameters from M12 to M30. (Other lengths available but lead times may apply).
(Other diameters available but lead times may apply). ■ ■ Choice of bolt thread lengths from 100mm to 200mm.
09
AUSTRALIA: 1300 KONNECT (566 632) | www.konnectfasteningsystems.com.au / NEW ZEALAND: 0508 KONNECT (566 632) | www.konnectfasteningsystems.co.nz
KONNECT FASTENING SYSTEMS® – STEEL FABRICATORS PRODUCT GUIDE
■■ One product does all — work safely & be ■■ Styrene free. No odour.
productive. ■■ Suitable for use in dry, wet and flooded holes.
■■ Heavy duty, High Performance anchorage. ■■ Vertical, horizontal and overhead applications.
■■ Deep embedment anchoring. Flexible ■■ Easy dispensing in cold climates.
embedment depths.
■■ Suitable for potable water use.
■■ ETA approved for cracked concrete anchorage
■■ Fire rated F120. VOC compliant.
(threaded rod).
■■ Order no: KONV4C – Box quantity 12.
■■ ETA approval for Seismic C1 anchorage
(threaded rod).
■■ ETA approved for post installed rebar
connections.
■■ Cure time of 50 minutes at 20°C base material.
■■ Suitable for carbide drilled holes.
APPLICATIONS:
Starter bars, structural steel plates, handrails, barriers, hold down brackets, seating. Close to edge and
close to anchor fixings.
■■ Fast curing for quick fixture fit-off. Cure time ■■ Suitable for use in dry, wet and flooded holes.
45 minutes at 20°C base material. ■■ Carbide drilled holes.
■■ ETA approval for uncracked concrete ■■ Easy dispensing.
anchorage (threaded rod M8 to M24).
■■ VOC compliant, low odour.
■■ Medium duty, high performance anchorage.
■■ Use Standard Caulking Gun (300ml) or
■■ Suitable for anchoring threaded rods and Coaxial Cartridge Dispenser (410ml).
reinforcing bars.
■■ Order No: KONP4C – 410ml Cartridge.
■■ For solid concrete and hollow masonry
■■ Order No: KONP4C300 – 300ml Cartridge.
substrates (with plastic sleeve).
Box quantity 12.
■■ Vertical, horizontal and overhead applications.
APPLICATIONS:
Steel plates and bars, handrails, balustrades, gate posts, brackets, timber to concrete.
For hollow materials use plastic sleeves to install threaded rods. Close to edge and close to anchor
fixings.
THREADED STUDS
■■ Chisel point stud with nut and washer.
■■ Available in 316 Stainless Steel, Galvanised and Zinc finish.
■■ Steel studs Grade 5.8.
■■ Depth mark for correct embedment.
■■ External hex driver included.
■■ Sizes: M12 - M24 | Lengths: 160mm - 300mm.
10
AUSTRALIA: 1300 KONNECT (566 632) | www.konnectfasteningsystems.com.au / NEW ZEALAND: 0508 KONNECT (566 632) | www.konnectfasteningsystems.co.nz
KONNECT FASTENING SYSTEMS® – STEEL FABRICATORS PRODUCT GUIDE
FIRE RATED
■■ ETA approved for cracked and non cracked concrete. ■■ Low VOC & suitable for drinking water use.
■■ ETA approved for seismic C1 (non structural) and C2 ■■ Fire rated up to 240min (rebar connections).
(structural). ■■ Dry, wet and flooded holes.
■■ ICC-ES approved for cracked and non cracked concrete. ■■ Close to edge and close to anchor fixings.
■■ Deep embedment anchoring.
■■ Working time of 30 minutes @ 20°C, loading/cure time APPLICATIONS:
of 10 hours @ 20°C.
■■ Structural steel connections, bridges, tunnels, water
■■ Carbide and diamond core drilled holes (non cracked infrastructure, seismic upgrades, starter bars, post
concrete). installed reinforcing connections, road and rail.
■■ Horizontal, vertical and overhead applications.
■■ Bonds threaded rods, reinforcing bars and internal
threaded sleeves.
+
Long 24 month shelf life Long gel/working time
from date of manufacture
11
AUSTRALIA: 1300 KONNECT (566 632) | www.konnectfasteningsystems.com.au / NEW ZEALAND: 0508 KONNECT (566 632) | www.konnectfasteningsystems.co.nz
KONNECT FASTENING SYSTEMS® – STEEL FABRICATORS PRODUCT GUIDE
SUITABLE FOR:
■■ Barriers & building façades.
■■ Handrails & balustrades.
■■ Machinery tie down.
■■ Seating & racking.
■■ Structural steelwork & fixture plates.
■■ Overhead anchoring.
■■ Scaffolding & platforms.
■■ Panels & cladding.
■■ Safety barriers.
TECHNICAL INFORMATION:
■■ For detailed technical information and performance reports contact
You may also need:
your local representative or refer to the Konnect Fastening Systems® Rotary Drilling Machines n Carbide Drill Bits n Hole Cleaning Pump
and Brushes n Drill Driver n Impact Driver
website.
SPECIFICATION ANCHORING
POWERS® PB-PRO-S EXTREME PERFORMANCE EXPANSION ANCHOR FOR SAFE
ANCHORING OF STEEL STRUCTURES TO CONCRETE
ETA-12/0174 ETAG 001-1
Option 1 cracked & uncracked concrete
FIRE RATED
APPLICATIONS:
■■ Structural steel connectors to concrete.
■■ Steel base plates to concrete.
■■ Machine hold down.
■■ Gate fixture plates.
■■ Safety barriers.
TECHNICAL INFORMATION:
■■ For detailed technical information and performance reports contact your local representative or refer to the Konnect
Fastening Systems® website.
12
AUSTRALIA: 1300 KONNECT (566 632) | www.konnectfasteningsystems.com.au / NEW ZEALAND: 0508 KONNECT (566 632) | www.konnectfasteningsystems.co.nz
KONNECT FASTENING SYSTEMS® – STEEL FABRICATORS PRODUCT GUIDE
POWER TOOLS
Milwaukee® M18™ Milwaukee® M18 FUEL™ Milwaukee® M18 FUEL™ Milwaukee® M18™ Site
Jobsite Radio/Charger 38mm Magnetic Drill 1/2" High Torque Impact Light/Charger w/ ONE-
(Tool only) (Tool only) Wrench with Pin Detent KEY™ (Tool Only)
M18RC-0 M18FMDP-0C (Tool Only) M18ONESLDP-0
M18FHIWP12-0
ABRASIVES
Flexovit® Metal Grinding Flexovit® Ultra-Thin Cut-Off Flexovit® Metal Cut-Off Wheels Flexovit® Zirconia Flap Discs Flexovit® Low Speed Cut Off
Wheels Wheels General Purpose Metal Cutting Designed for grinding/finishing of Wheels
Metal Depressed Centre Grinding Mega Inox Ultra-Thin Cut-Off Wheels for use on ferrous welds, rust removal and deburring. Suitable for most 240V electric
Wheels for use on ferrous metal Wheels for cutting very hard metals with excellent life and cut off machines. Fast cutting of
welds and structural steels. ferrous metals and stainless steel. performance. ferrous metals including bar and
Excellent life and performance. tubing.
Konnect Fastening Systems® Konnect Fastening Systems® Konnect Fastening Systems® Konnect Fastening Systems® Konnect Fastening Systems®
Ultra Thin Stainless Steel Metal Cut Off Discs Thin Stainless Steel Metal Grinding Discs Flap Discs
Cut Off Discs High quality, stainless steel grade Cut Off Discs The ultimate performer for mild n Industrial quality n Depressed
High quality, stainless steel grade & metal cutting discs n Well High quality, stainless steel grade steel and stainless steel grinding centre, suitable for general
& metal cutting discs n Well balanced n Lower heat generation & metal cutting discs n Well and finishing n Up to 15% more purpose grinding n Long lasting
balanced n Lower heat generation n Lower machine load extends balanced n Lower heat generation abrasive n Built-in grinding angle n Well balanced
n Lower machine load extends tool life n Lower material loss n Lower machine load extends (15°) n Heavy duty reinforced n Size: 100mm to 125mm.
tool life n Lower material loss n Available in Metal 115mm to tool life n Lower material loss backing cloth n Well balanced to
n Available in Metal 115mm to 230mm and stainless steel Inox n Available in Metal 115mm to eliminate vibration and fatigue.
230mm and stainless steel Inox 115mm to 230mm. 230mm and stainless steel Inox n Size:100mm,125mm.
13
AUSTRALIA: 1300 KONNECT (566 632) | www.konnectfasteningsystems.com.au / NEW ZEALAND: 0508 KONNECT (566 632) | www.konnectfasteningsystems.co.nz
KONNECT FASTENING SYSTEMS® – STEEL FABRICATORS PRODUCT GUIDE
DRILL BITS
Strengthened Core
Stanley® 6 in Classic 99® Stanley® FATMAX® 18mm Stanley® FATMAX® 10 pack Stanley® FATMAX® Vibration Stanley® 300mm/12"
Retractable Utility Knife Snap-Off Knife 18mm Snap-Off Blades Dampening Cub Hammer Adjustable Wrench
Multiple blade positions allows Auto loading spare blade saves 75% longer life, 35% sharper Particle filled fibreglass core & Forged chrome vanadium steel is
wider usage for variety of cutting time n Blade locking clamp and 20% stronger than traditional antivibe shock absorbing layer strong and durable n Handle hole
applications n Blade storage inside n Bi-material handle and stainless Stanley blades n Ideal for paper, reduce vibrations n Forged hammer for tethering, hanging or storage.
the handle. steel cartridge n Blade snapper for card, leather and most sheet head includes one bullet nose for 2
speedy and safe blade snaps. materials n General purpose blade. x more striking force.
Stanley® FATMAX® 8M Tape Stanley® 5M Tape Measure Stanley® FATMAX® 1200mm Stanley® FATMAX® Pro Torpedo Stanley® FATMAX® Pro 600mm
Mylar Polyester blade coating and 19mm blade width for clear and Box Level Level Magnetic Box Level
Blade Armor extend blade life n High legible markings n Tylon™ blade Heavy box beam construction 180 degree rotating vial to Rock solid box beam construction
Impact Case with Rubber Overmold coating for improved durability n Accuracy of 0.5mm/m & duplicate angles n Magnified centre n Best in class accuracy in 8
is jobsite tough n 32mm wide blade and wear resistance n TRU-ZERO™ 0.7mm/m n Bridged centre vial. vial for improved visibility. orientations of +/-0.5mm/m.
delivers 3.3m blade standout. hook for precise inner and outer
measurements n Bright yellow,
easy-to-read blade.
Stanley® FATMAX® 30m/100' Stanley® 227g/8oz Stanley® 10"/254mm Stanley® FATMAX® 24" Stanley® 15" Super
Chalk Line Reel With 4oz BLUE CHALK Precision Claw Bar Wrecking Bar Wonder Bar® Pry Bar
Blue Chalk and Marker Blue colour: all round colour for Forged high carbon alloy steel for Tri-lobe design n Slotted claw and Extra long length for extra reach
3.5:1 gear ratio for fast rewind interior and exterior use n Powder long life n Polished bevelled claws bevelled ends improve functionality and more leverage n Tightly welded
n 50lb breaking strain on line for specially formulated for good for precise penetration n Ideal for and performance n High-visibility, bend angle for more precise
long n Can be used vertically as adhesion and high visibility. precision nail pulling and prying. powder-coated finish. positioning n Extra long tongue for
a plumb bob n Hi-impact durable better grip and longer reach for
water resistant ABS case. those hard-to-get-at places.
14
AUSTRALIA: 1300 KONNECT (566 632) | www.konnectfasteningsystems.com.au / NEW ZEALAND: 0508 KONNECT (566 632) | www.konnectfasteningsystems.co.nz
KONNECT FASTENING SYSTEMS® – STEEL FABRICATORS PRODUCT GUIDE
BEAVER BRANDS
SAFETY
Konnect Fastening Systems® Mack® Flyer Eyewear Frontier Ninja® HPT™ Frontier Croc Grip Multi-Purpose Frontier Disposable Foam Ear
Safety Glasses AS/NZS 1337.1:2010 Standards Leather Rigger GripX Glove Clip Plugs
Lightweight safety glasses that Approved n Anti scratch coating to Glove The most Available in six colours (black, blue, Uncorded or corded poly packs,
provide great coverage for your reduce marking and dirt build up Beige in colour lightweight orange, yellow, pink and red), in with a foam material and available
eyes n Available in a variety of lens n Superior Anti fog coating for use and available in multipurpose packs of 20. in packs of 5 pairs or 10 pairs.
tints, including mirrors and antifog in humid environments n UV400 sizes small - 2x glove, providing
n Australian Standards Medium filter for 100% UV protection large. superior grip
Impact AS/NZS1337.1. outdoors n Polarised Lens and dexterity in
wet, dry and oily
conditions.
(L) Frontier Tradie Ear Muff Frontier High Impact Face Shield Frontier Clear View Hard Hat Frontier Tuffguard Hard Hat Frontier Barrier Tape
Class 4 24dBA. with Chin Guard Uv400 Stabilised and vented, with Vented 6 point web suspension, 100m x 75mm roll, MOQ 20 per
Clear in colour, with a replacement 6 point webbing hardness n AS/NZS white in colour. box.
(R) Frontier Pro5 Ear Muff visor available. 1801 Approved n Available in blue,
Class 5 30dBA. clear, green, orange, pink, red,
smoke and yellow.
Frontier Safety Frontier Traffic B-Safe® Safety Harness with B-Safe® Roofer’s Kit B-Safe® Full Body Harness Beaver® 250kg &
Vest Cone Quick Release Buckles Complete Roof Worker’s kit. All c/w Rear & Front Fall Arrest 500kg 3S Lever Block
Available in 700mm, MOQ 6 pr or 1 carton. items comply to AS/NZS standards. Attachment Points Manufactured to AS 1418.2 &
yellow & orange, non-reflective. Full body harness with 2 exceeds standards n High quality
sizes from small attachment points; the mesh panel aluminium housing n Easy handling
to 5X large. gives the harness form and ease with low physical force on lever
of wear. n Fully protected mechanism for
Shackle Bow Grade S Galvanised Multi Purpose 50mm X 9m Roundsling Mega 1000kg x 1.0m Eye Nut DIN582 Gold Turnbuckle Commercial
8x10mm WLL 0.75T Each Pail Ratchet Tie Down Assembly Beaver Synthetic Round Lifting M10 WLL 230kg. Galv Stubs 16mm.
Contains 50 Each With Hook & Keeper Sling n Manufactured to AS 4497.
A rated shackle that meet the Ratchet assemblies comply to Supplied with Test Certificate.
requirement of AS 2741. n Grade Australian Cargo Restraint System n All-purpose lifting sling
S Shackles are the most common Standards AS/NZS 4380. n Continuous loop made from
Shackle Dee Grade S Galvanised Multi Purpose 35mm Roundsling Mega 2000kg x 2.0m Eyebolt ZP Metric WLL Turnbuckle Commercial
10x11mm WLL 1.0T Each Pail Ratchet Tie Down Assembly Beaver Synthetic Round Lifting 340kg Large Eye 12mm FGD E/E 10mm.
Contains 30 Each Ratchet assemblies comply to Sling n Manufactured to AS 4497. Lifting Eye Bolts - Metric
A rated shackle that meet the Australian Cargo Restraint System Supplied with Test Certificate. Shouldered to DIN 580 n Gold Zinc
requirement of AS 2741. n Grade Standards AS/NZS 4380. n All-purpose lifting sling Dichromate Finish n Conforms to
S Shackles are the most common n Continuous loop made from AS2317-1984.
shackles used in lifting applications, polyester yarn encased in a sleeve
with a high strength to size ratio. of polyester or nylon fabric.
* Products listed on this page are available in selected branches only.
15
AUSTRALIA: 1300 KONNECT (566 632) | www.konnectfasteningsystems.com.au / NEW ZEALAND: 0508 KONNECT (566 632) | www.konnectfasteningsystems.co.nz
BRANCHES
Also available at:
Cooper Fluid Systems Mackay – 8 Michelmore Street, Paget QLD 4740 | Ph: (07) 4952 4844
Cooper Fluid Systems Kalgoorlie – 16 Atbara Street, Kalgoorlie WA 6430 | Ph: (08) 9021 4000
Cooper Fluid Systems Newman – Shed 2, 10 Pardoo Street, Newman WA 6753 | Ph: (08) 9181 5500
CURRENT AS OF 24/07/2018. Branch Listings may have changed from time and date of printing.
If pricing is included in this publication, all prices are valid for the catalogue period. However, Coventry Group Ltd (CGL) trading as Konnect Fastening Systems, reserves the right to amend prices in certain
circumstances without further notice. Delivery charges apply for delivery of products in this catalogue. Items shown in this catalogue are not be stocked in all listed locations and may need to be ordered upon
customer request. CGL cannot be responsible for the unavailability of such products as a consequence of the failure of suppliers to deliver at all or on time through any circumstances beyond its control E. &
O. E. Due to continual product improvement some products may differ from images featured in the catalogue. Whilst every care has been taken to ensure all information and technical data is accurate, CGL
will not be liable to any purchaser that relies on any matter, fact or representation, nor will it be liable for subsequent damage or less resulting from the use of any information contained in the publication.
Purchasers should make enquiries prior to placing an order regarding the fitness and suitability of the products advertised. Images shown are for publication artwork purposes and may differ on physical
products and artworks.