Professional Documents
Culture Documents
2019
CATALOG | GLOBAL
Over 35 Years of Weather Innovation
1980
1984 | TURBO METER 1988 | DIGITAR 1989 | DIGITAR
This hand-held device WEATHER PRO WEATHER MASTER
reads wind speed A micro weather station for A complete weather
in miles/hour, knots, measuring basic weather conditions. station with barometer, 1990
feet/minute, or The Weather Pro is the origin of affordable enough for
meters/second. Davis’s home and industrial home use.
weather market leadership.
P5 P14 P18
Identifies the products that can be integrated Identifies stations suitable for use with
with the EnviroMonitor system. ® GLOBE protocol. See page 37 for details.
Sensor Transmitter Repeater Receiver Software
Identifies the products that can be integrated Identifies the stations or sensors that can be (optional) (optional)
with the Sensor Transmitter. NIST traceable. See page 37 for details.
Vantage Pro2
1. TIME & DATE 5. RETRANSMITS 8. RAIN such as daily highs 12. GRAPHS 14. ALARMS
View the current time Main console can Console updates rain and lows, temperature Graphs the last 25 Set 22 simultaneous,
and date, or time of extend range to totals and rain rate every changes by the hour, hours, days, or months. different alarms to
sunrise/sunset. additional consoles up 20 seconds for the last and barometric value View up to 50 graphs warn of dangers such
to 1,000 ft. (300 m). 25 hours, days, and changes. Also displays for temperature, rain, as high winds, freezing
2. MOON PHASE months. astronomical data. rain rate, wind, and temperatures, rain
Track the eight phases of 6. BAROMETER barometric pressure—all rate, heat index, flood
the moon. Five-position trend 9. “CHANGE IN 11. USER-FRIENDLY on the console. warning, and more.
arrow shows whether WEATHER SINCE KEYPAD
3. FORECAST barometric pressure is YESTERDAY” FEATURE Domed buttons are 13. “THIS TIME 15. WIND SPEED
Icons let you know to rising, falling, or stable. Allows comparisons easy to feel and press. YESTERDAY” FEATURE See wind speed updates
expect sun, partly cloudy, of temperature and Glow-in-the-dark keypad Data point on the graph every 2.5 seconds.
clouds, rain, or snow. 7. VARIABLE buttons give you access indicates the weather Displays wind speed in
barometric pressure from
DISPLAY OPTIONS day to day. to weather information during the same time miles per hour, meters
4. TEMPERATURE See updated values every per second, kilometers
at night. The “DONE” yesterday to help
& HUMIDITY 10 seconds for heat 10. WEATHER CENTER key returns you to the compare and analyze per hour, or knots.
Console updates outside index and wind chill to Weather Center provides “current” screen from day-to-day weather Provides the average
temperature every 10 get a better “feel” for the additional information for anywhere in the program. trends. and high wind speed for
seconds and inside outside environment. each weather variable, 2-minute and 10-minute
temperature every intervals.
minute. In addition,
5
outside humidity updates
every 50 seconds and 1 2 3 4
inside humidity every
minute.
15 6
14
7
8
13
9
12 10
11
1 2 3
10
9 4
7 6
8
« The Sensor Suite mounts on poles from
1.00" to 1.75" (2,54 cm to 4,45 cm) in
diameter (pole not included).
1. CURRENT & 6. RETRANSMITS 9. SOLAR RADIATION 11. VARIABLE 13. STATUS INDICATOR 16. GRAPHS
HISTORICAL DATA Main console can Included on Vantage DISPLAY OPTIONS Blinks to let you know Graphs the last 24
View current data or retransmit to additional Pro2 Plus. View View inside or additional that data packets are hours, days, or months
highs and lows for up consoles up to 1,000 ft. solar radiation, highs temperatures, humidity, being received. of readings; or highs
to 24 days, months, (300 m). for the day, month, soil moisture, UV index, and lows. View over
or years. and year, as well as leaf wetness, wind chill, 14. CONTROL KEYS 80 graphs, including
7. BAROMETER evapotranspiration and dew point, and two Use arrow keys to scroll additional analyses
2. FORECAST Five-position trend Temp/Hum/Sun/Wind different heat indices. through data on the of temperature, rain,
Icons let you know what arrow shows whether (THSW) index. Set (Additional sensors graph or view highs rain rate, wind, and
to expect: sun, partly barometric pressure is alarms for high readings. or stations may be and lows over time. barometric pressure.
cloudy, rain, or snow. 12- rising, falling, or steady. required.) "Plus" and "minus" keys
hour icon forecast plus 10. UV simplify data toggling. Vertical scale changes
24–48 hour ticker-tape 8. FIXED DISPLAY Included on Vantage Pro2 12. RAIN depending on what you
forecast at the bottom Fixed display area shows Plus. View current UV Umbrella icon appears 15. TICKER- are graphing.
of the console screen. the outside temperature, index, UV index for the when it is currently TAPE DISPLAY
humidity, and barometric day; the daily, monthly, Provides expanded 5 17. ALARMS
raining. View last 24
3. MOON PHASE pressure at all times. and yearly highs; or forecast details as Set more than 70 alarms
storm totals with start
Track the eight phases change scale to see UV in well as additional for multiple functions
and end dates. View
of the moon. current, hourly, and daily information on simultaneously.
daily, monthly, or yearly
MEDs. Set alarm to warn rainfall and rain rate. current conditions. 6
4. TIME & DATE Displays more 18. WIND
of high UV dose/index.
View the current time than 100 different Compass rose with 16
and date, time of messages. points shows current and
sunrise/sunset, time dominant wind direction.
and date of highs/lows, Inside the compass rose,
and time and date of a 1 2 3 4 view wind direction to 1°
graphed data point. resolution, or view wind
speed.
5. WIRELESS 7
Frequency-hopping,
18
spread-spectrum radio 8
provides three times the 17 9
transmission distance
of the competition, 10
improved reception 16
through multiple walls, 11
and greater immunity 15 12
from RF interference.
13
14
3 5
6152 Wireless Vantage Pro2. Includes built-in bubble level for accurate
installation. The aluminum-plated tipping bucket in our rain collector is self-
emptying, corrosion-resistant, and laser-calibrated for exceptional accuracy.
Pictured: 6163 Wireless Vantage Pro2 Plus
See page 41-42 for installation diagrams. with 24-Hour Fan-Aspirated Radiation Shield
Weather Stations
Choose the configuration that's
right for you. The Davis Vantage
line is offered as a full weather
station (Sensor Suite and console)
or a stand-alone Sensor Suite Vantage Pro2 Vantage Pro2 Plus
Vantage Vue Shown here: 6152 Shown here: 6163
(without console).
Davis accuracy in a Create a customized professional Includes UV & Solar Radiation sensors.
self-contained, easy- station with a wide range of options
24-Hour Fan Aspiration model achieves
to-install system. and sensors. Solar-powered transmitter
maximum accuracy of temperature & humidity
and detachable anemometer.
Includes solar- readings by circulating the air. Ideal for arid
powered transmitter. Choose a cabled station for the most climates.
economical installation where lightning
risk is minimal. Choose wireless for easiest
installation, additional sensor options
and reduced risk of lightning damage.
The Davis line of Vantage weather stations 6250 6152C 6152 6153 6162C 6162 6163
is built to provide a full weather system. To Wireless Cabled Wireless Wireless Cabled Wireless Wireless
maximize your weather watching, a variety of
additional sensors and stations are available
w/Fan w/Fan
to make your weather station even more
comprehensive.
CONSOLE
Should be run using the included AC-power
adaptor. Add three C batteries (not included)
for backup during power outages.
May be run full-time using three C batteries
(not included). May also be run using the
included AC-power adaptor.
12-hour advance forecast icons
UV Sensor
DATA TRANSFER
100' (30 m) cable
ADD-ONS
Additional consoles to view data in more than
Optional Optional Optional Optional Optional
one location
Special-purpose Wireless Leaf & Soil Moisture/
Optional Optional Optional Optional
Temperature Station
Sensor Transmitter Optional Optional Optional Optional
2. Choose a Plus
model
• Solar and UV sensors
come pre-installed.
• Console calculates ET
• Save money over
buying separately.
Shown here:
Solar and UV sensors,
and mounting shelf.
All consoles and Sensor Suites are NIST traceable except for the Vantage Vue Sensor Suite.
Mounting Tripod
This galvanized steel tripod with tilting brackets
makes for an easy installation anywhere, even on
a roof or uneven surface. Perfect for mounting any
Sensor Suite, Vantage Connect or EnviroMonitor
Gateway/Node. Poles measure 36.38" (0,92 m)
long. Assemble the two together to make a single
69.75" (1,77 m) pole. Outside diameter is 1.31"
(33 mm). For ground installation use 7716A,
which includes three 18" (0,5 m) lag bolts.
7716 Mounting Tripod
Installation Guidelines
Mount your Vantage Vue or Vantage Pro2 Sensor Suite:
• 5-7 feet (1,5-2,1 m) above the surface (ground • At least 2 feet (0,6 m) above the average maximum
or roof). yearly snow depth.
• Over a flat area that is gently sloping, regularly mowed, • So that the anemometer is not blocked by surrounding
or naturally landscaped, with good drainage. obstructions such as trees or buildings.
• Away from heat radiators, such as asphalt or air • The Vantage Pro2 anemometer can be extended from
conditioning units. the station with the 40 ft. (12 m) included cable, or by
• Where you can access the rain collector for combining with a Sensor Transmitter.
maintenance. (See page 31 for options.)
Durability Value
Our weather stations go through a minimum of 10 tests Our products are designed to provide professional-grade
before shipping. They have been engineered to withstand instruments at an affordable price. You can find a cheaper
corrosion, 200 mph (90 m/s) winds, the scorching sun, station, but you won’t be disappointed by a Davis station.
and extreme temperatures.
WeatherLink Network:
The Davis online community
Join the WeatherLink Network by connecting your
weather station to the WeatherLink Cloud to access your
data anywhere, anytime on WeatherLink.com and the
WeatherLink mobile apps.
See pages 19-21 for more information.
WeatherLink Live
Wi-Fi/Ethernet
Vantage Connect
Cellular
EnviroMonitor Gateway
Cellular+Mesh Network
WeatherLink USB/Serial
Computer
P14
Data Collection | WeatherLink Live
• Share data with friends, family, or co-workers Comes Wi-Fi ready, with a 6.5 ft. (2 m) power Wind Speed
via the WeatherLink website and mobile cable and a 5 ft. (1,5 m) Ethernet cable. & Direction
applications.
6100 WeatherLink Live
• Upload to a growing list of third-party sites
like Weather Underground or CWOP.
Barometric
Alexa, ask
Pressure
WeatherLink
Solar Radiation
Rainfall to get my Inside
& UV
current Temperature
Leaf Wetness conditions. & Humidity
Soil
Moisture Water
Temperature
Temperature
& Humidity
Temperature
& Humidity
Connected by
Data Logger
Storage capacity** 180 days 104 days 104 days 90 days 180 days
*Data loggers noted as indoor can be installed in a Solar Power Kit for use outdoors. (See page 34.)
**Based on data from one Sensor Suite at a 15-minute archive interval.
WeatherLink.com
Web
WeatherLink
Mobile App
Mobilize
Mobile App
WeatherLink
Computer Software
Console
P18
Data Viewing | WeatherLink
WeatherLink Live Automatically sends data to WeatherLink Cloud. Download data from WeatherLink Cloud to Computer Software.
Vantage Connect WeatherLink Computer Software is not compatible with WeatherLink Live.
1 3
EnviroMonitor Gateway
Optionally upload data to WeatherLink Cloud Data stored and analyzed in WeatherLink Computer Software.
WeatherLink USB/Serial
for FREE. (Data logger cabled to an internet-
Data Logger 2
connected computer running 24/7)
WeatherLink Cloud
Radio Transmission
Computer
GroWeather Vantage VUE
Sensor Suite Console
Vantage
Connect/
EnviroMonitor WeatherLink Live
Gateway Data Logger
2
View current conditions bulletin dashboards Use the chart feature to compare multiple
from the global WeatherLink Network of weather data variables at the same time.
public stations. Free with Basic Upgrade to Pro
View your current and forecast conditions Developed to help commercial growers
from your station and the WeatherLink with critical decisions, Mobilize gives
Network of public stations around the any farmer or sophisticated gardener the
world, all from a mobile phone or tablet. power to track site-specific conditions
related to irrigation, weather, frost, and
FREE with WeatherLink Basic.
more. See pages 26-27 for details.
Search “Davis WeatherLink Mobile” on iOS and
Upgrade to Pro to use Mobilize.
Android app stores.
1. Current Conditions: Build and customize your bulletin 5. Mobilize: Use the Davis Mobilize app on iOS or Android to
dashboard to receive current data updates from all of your create custom frost, weather, crop, IPM, and irrigation reports
installed sensors. You can move and resize tiles to see the to view on WeatherLink.com and mobile. It's robust enough to
data just the way you like it. protect your farm crop from frost—and fun for the data-savvy
2. Map: Use the WeatherLink map to view and interact backyard gardeners looking to perfect their tomato crop.
with the community of public stations in our worldwide 6. Device Upgrades: Upgrade a device to access historical
WeatherLink Network. Click on a station to see a summary data, charting, and the ability to Pro Share.
of current data and click "bulletin" to see the station's 7. Pro Shares: Pro Share your device to give another user
customized weather dashboard. access to historical data and charting.
3. Chart: Visualize any of your sensor data with custom line 8. Third-Party Upload Rate: This is the rate at which you
and bar charts on up to four different y-axes. Zoom into an can upload your device’s data to a third-party site such as
hour of data or out to a full year to view details and trends. Weather Underground, GLOBE, or CWOP.
4. Data: Access all of your raw sensor data at the click of a
button. You can sort by date/time or data type and export any Pro account is FREE with a Vantage Connect or
data set directly to an Excel-friendly .csv file. EnviroMonitor Gateway Service Plan.
Gateway
Nodes
Sensors
Mobilize
P22
the easily expandable EnviroMonitor system to
build a custom network of sensors to help make
critical crop decisions.
EnviroMonitor | Gateway and Node
EnviroMonitor Gateway
The EnviroMonitor Gateway collects all essential data from the Nodes and pushes it
securely to the WeatherLink Cloud using cellular connectivity. The data can then be
accessed on your smart devices and computers. The solar-powered, cellular Gateway
EnviroMonitor includes a 5-watt solar panel and a rechargeable 6-volt backup battery encased in
Gateway a weather-resistant housing. Mounting hardware is included. Requires an Annual
Service Plan and a one-time activation fee. (See Annual Service Plans on page 29
for details.)
6801 EnviroMonitor Gateway
EnviroMonitor Nodes
Nodes connect over a self-optimizing mesh network and transmit critical sensor data
to the EnviroMonitor Gateway. The solar-powered Node is self contained and weather
resistant. Includes a 3-watt solar panel and mounting hardware. Each EnviroMonitor
network can host 25+ Nodes.
EnviroMonitor Nodes communicate with each other, allowing complete network flexibility around
Node barriers and across distances.
6810 EnviroMonitor Node
Node Features
• Connect up to 4 sensors to each Node • Configures easily with a smartphone
• Communication range: Up to 4,000 ft. • Rechargeable lithium-ion battery
(1,200 m), Node-to-Node and (included) powers the unit at night
Node-to-Gateway • 4 D-cell batteries (not included)
Note: Range varies with terrain and environment provide backup
EnviroMonitor EnviroMonitor
Node Gateway
Expand effortlessly with Davis Soil Soil Soil Water Level Leaf
Compatibility
EnviroMonitor is compatible with SDI-12, analog voltage
(i.e. 0-3V; 0-5V; 0-12V), contact closure, pulse, and I2C
sensors. We are constantly integrating new sensors to expand
the capabilities of the EnviroMonitor platform and software.
Please contact us if you would like a sensor added.
See page 27 for more information on the EnviroMonitor app. See pages 26-27 for more information on the Mobilize app.
GroWeather
Sensor Suite
6820C
EnviroMonitor for
any application
Build your own or pick from our
application-specific systems. No
matter how you configure your
system, EnviroMonitor provides
more features for a lower cost My Farm, My Weather IPM System Inversion System
than the competition. Monitor field specific weather Monitor weather and Monitor weather and inversion
manage pest conditions conditions for frost and spray drift
• EnviroMonitor Gateway (6800) • EnviroMonitor Gateway (6800) • EnviroMonitor Gateway (6800)
• GroWeather Sensor Suite • EnviroMonitor Node (6810) • EnviroMonitor Node (6810)
(6820C) - Leaf Wetness Sensor (6420) - 2 Temp/Hum Sensor
• GroWeather Sensor Suite w/Radiation Shield (6830)
Sensors and Hardware (6820C) • GroWeather Sensor Suite
(6820C)
Node +
Node + Node + Node +
Soil Moisture Sensor
Pressure Switch Soil Moisture Sensor Rain Collector
Applications
Node +
Gateway + Soil Moisture Sensor
Node + Full GroWeather System
Soil Moisture Sensor +
Leaf Wetness Node +
Gateway + Flow Meter
Full GroWeather System
— —
60 minutes Call 6896
Call Call
Gateway + Node +
Full GroWeather System Soil Moisture Sensor
High Temperature
Wind Speed
24-HR Rainfall
Barometric Pressure
P30
Sensors & Accessories
Sensor Transmitters
1,000 ft. Sensor Transmitters are the building blocks of your custom network of sensors.
(300 m) Solar or AC 9 Month
They can be positioned indoors or outdoors and are capable of transmitting
Transmission Powered Battery Backup
Distance data up to 1,000 ft. (300 m). Each transmitter can support up to five sensors,
including an Anemometer, Rain Collector, Temperature Probe or Temperature &
6 1 5 Humidity Sensor, UV Sensor and Solar Radiation Sensor.
Supported Of Each Sensor Ports Combine Sensor Transmitters with a WeatherLink Live to take full advantage of
Davis Sensors Supported Sensor the devices' capabilities.
See the ST symbol on pages 33-34 for compatible sensors and page 41 for transmitter
configuration options.
Includes transmitter in weather-resistant housing, mounting hardware, solar panel,
Wind Speed Solar Temperature and backup battery.
& Direction Radiation & Humidity
6332 Solar-Powered Wireless Sensor Transmitter
or
Includes transmitter in weather-resistant housing, mounting hardware, backup battery,
and 6.5 ft. (2 m) power adaptor cable.
Rainfall UV Temperature NEW 6331 AC Powered Wireless Sensor Transmitter
4 4 2
6345 Wireless Leaf & Soil Moisture/Temperature Station (without sensors)
Applications
• Pool
• Greenhouse
• Basement/crawl space
• Garage
Separate the Vantage Pro2 Use a Wireless Leaf & Soil Moisture/ Monitor temperature and humidity
• And many others Anemometer up to 1,000 ft. Temperature Station to monitor where it matters most.
(300 m) with a Sensor Transmitter. important growing conditions.
W E BAROMETRIC
in
PRESSURE
CHILL RAIN RATE
SW SE F
WEATHER
CENTER
Vantage VUE
Add additional Vantage Vue or Vantage Pro2 Consoles to display weather data in the
den, bedroom, kitchen—even in your neighbor’s house if it’s closer than 1,000 ft.
WIND N
pm WIND N
NW NE pm
GRAPH 2nd
NW NE
GRAPH 2nd
TEMP OUT HUM OUT BAROMETER
F TEMP OUT HUM OUT BAROMETER
W E hPa
F
W E hPa
MPH
TEMP IN HUM IN CHILL MPH
SW SE
F TEMP IN HUM IN CHILL
F SW SE
S F F
Last 24 hrs Every 1 hr S
Last 24 hrs Every 1 hr
(300 m). Vantage Vue transmitters are radio-compatible with Vantage Pro2 so you
Vertical Scale: X10
can mix and match components. Receive data directly from the outdoor sensors or
WIND N
pm
use your console as a repeater, retransmitting the data from one console to another
NW NE
GRAPH 2nd
MPH
TEMP IN HUM IN CHILL
SW SE
F F
S
Last 24 hrs Every 1 hr
and extending the transmission range up to another 1,000 ft. (300 m). With Vantage
Pro2 only, an additional console can receive data directly from any of our sensor data from one console/receiver to another.
transmitters (see page 31 & 41 for additional details).
Sensors
6410 Anemometer Features both temperature and humidity sensors 6440 Soil Moisture Sensor
inside a protective housing. Ideal for indoor use.
2. Turbo MeterTM
®
to power the motor-driven fan. Includes 10 12. Temperature Probe with RJ Connector*
Uses the Vantage Pro2 base for easy mounting on
plates, hardware for mounting on a fence post or
a pole, post, or flat surface. Meets the guidelines Temperature probe with durable plastic housing.
pole, and 25 ft. (7,6 m) cable.
of the World Meteorological Organization. Use to measure temperature of air, soil, or water.
Measures in 0.01" or 0,2 mm increments. 6832 Temperature/Humidity Sensor with Use with Weather Envoy or Sensor Transmitters.
Includes mounting hardware and 40 ft. (12 m) 24-Hour Fan-Aspirated Includes 25 ft. (7,6 m) cable.
cable, bird spikes, and debris screen. Radiation Shield
6477 Temperature Probe with RJ Connector
6465 Rain Collector with *Sensor comes with RJ Connector.
RJ Connector Node Adaptor (part #6860) ®
Mountable Base
needed when using with EnviroMonitor.
*Sensor comes with RJ Connector. RJ Connector 14. UV Sensor 6673 Sensor Mounting Shelf
Node Adaptor (part #6860) needed when using Measures the intensity of the sunburning portion
with EnviroMonitor. of the UV spectrum (UVA and UVB), closely 16. Universal Mounting Bracket
matching the Erythema Action Spectrum. Allows For mounting a Solar Radiation Sensor, UV
you to display UV index, dose rate, and daily and Sensor, or Radiation Shield (7714). Bracket is
accumulated dose. Latest-technology transducer pre-drilled for easy mounting. Includes mounting
and newly-designed electronics provide greater hardware.
See pages 10-11 for our line of Sensor Suites.
accuracy and stability. The comb structure
See page 42 for extension cables and maximum 6670 Universal Mounting Bracket
cable lengths. provides improved cosine response accuracy
Accessories
1. Solar Power Kit 3. Extra Solar Panel Kit
1 Large solar panel powers a Wireless Console or Provides additional charging power to the
Weather Envoy inside a weather-resistant shelter. battery in your Solar Power Kit (6612 or 6614),
(Outdoor sensors are powered by the solar Vantage Connect, or EnviroMonitor Gateway for
2 panel on the Sensor Suite). Includes a 5-watt installations where sunlight is limited. The 5-watt
solar panel, weather-resistant shelter, regulator solar panel is mounted on a weather-resistant
circuit, 1.4-amp-hour 6-volt rechargeable battery, shelter in which a console or Envoy can be
mounting hardware, and 10 ft. (3 m) cable. mounted. Includes 5-watt solar panel, weather-
resistant shelter, mounting hardware, and a 4 ft.
6614 Solar Power Kit
(1,2 m) cable.
2. Heavy-Duty Solar Power Kit 6616 Extra Solar Panel Kit
3
Our large solar panel and a 12-amp-hour battery
provide enough power for a Cabled Console and
4. Universal Shelter
4 outdoor Sensor Suite or Wireless Console where Protects console and other components located
more power is needed. There is enough room outdoors. Weather-resistant enclosure provides
inside the weather-resistant shelter to mount a protection from the elements for a Vantage Pro2
Weather Envoy. When used with a Vantage Vue console or Vantage Vue console with or without a
or Vantage Pro2 Console, mount the Console WeatherLink data logger, or for a Weather Envoy
inside a Universal Shelter. Includes 5-watt with WeatherLink data logger. Includes mounting
solar panel, weather-resistant shelter, regulator hardware. Measures 13.75" × 10" × 4.18"
See www.davisinstruments.com/weather/uses circuit, 12-amp-hour 6-volt rechargeable battery, (34,9 cm x 25,4 cm x 10,6 cm).
to view various ways to use these kits and mounting hardware, and 10 ft. (3 m) cable.
6618 Universal Shelter
shelter.
6612 Heavy Duty Solar Power Kit
11
8
7
7a
16
15
12
5. Shelter Angle Bracket 9. 3-volt Lithium Battery CR123 13. New 24-Hour Fan-Aspirated
Changes the EnviroMonitor Gateway, Vantage Replacement 3-volt lithium battery (CR123). Radiation Shield
Connect, or Universal Shelter solar panel's Our patented, 24-Hour Fan-Aspirated Radiation
8415 3-volt Lithium Battery CR123
angle from 5 degrees to 30 degrees to increase Shield helps maximize accuracy of sensor
efficiency at lower latitudes. Includes mounting 10. 6-volt 12Ah Battery readings. A motor-driven fan draws a constant
hardware. Replacement 6-volt 12Ah battery for airflow through the sensor chamber at 500 feet
Vantage Connect or EnviroMonitor Gateway. per minute (2,5 m/s). At night, when the effects
6671 Shelter Angle Bracket
of radiation are less, this solar-powered model
6. AC Charger Kit 6712 6-volt 12Ah Battery runs on battery power and the airflow slows to
Charges the battery in a Vantage Connect or 280 feet per minute (1,4 m/s). Install your own
11. Radiation Shield sensor in the sensor chamber. Sensor chamber:
EnviroMonitor Gateway where sunlight is too low
Received a 5-star rating from the World 2.24” x 3” (56,8 mm x 76,2 mm). Includes
to use solar. Includes 5.5 ft. (1,6 m) cable.
Meteorological Organization. Protects temperature 10 plates, rechargeable batteries, mounting
6710 AC Charger Kit sensors from solar radiation and radiated or hardware, and 25 ft. (7,6 m) cable.
reflected heat sources. Multi-plate construction for
7. Rain Collector Heater 6838 24-Hour Fan-Aspirated
maximum airflow. Use with Leaf & Soil Moisture/
Radiation Shield
For older Sensor Suites that do not have the Temperature Station and all temperature sensors.
AeroCone. Heater and insulation fit neatly inside Or, install your own sensor in the sensor chamber.
14. New Replacement Motor Kit
the old style rain collector. For use in cold Sensor chamber: 4.25” x 2.5” (107,9 mm x 63,5
climates to measure freezing rain or the moisture mm). Includes 8 plates, mounting bracket, and without Batteries
content of snowfall. Requires access to AC power; mounting hardware. Replacement motor for the Daytime Fan-Aspirated
cannot be run using a solar power kit. Includes Radiation Shield. We recommend replacing every
7714 Radiation Shield Assembly required.
24-watt, 24-volt heater with thermal cut-off two years.
switch, control unit, insulating reflective blanket, 12. Daytime Fan-Aspirated Radiation 7758 Replacement Motor
AC-power adaptor, and 50 ft. (15 m) cable.
Shield Kit
7720 Rain Collector Heater
An economical way to add the benefits of fan 15. New Replacement Motor Kit
(no rain collector) with Batteries
aspiration by retrofitting your Wireless or Cabled
Vantage Pro2 or Pro2 Plus. Less costly than our Replacement motor for the 24-Hour Fan-Aspirated
7 & 7a. Rain Collector and Heater
24-Hour Fan-Aspirated Radiation Shield, but Radiation Shield. Includes two rechargeable
For Sensor Suites with an AeroCone. Temporarily nearly 75% as effective in reducing the effects of C-batteries. We recommend replacing every
replace your rain cone with a straight-sided rain daytime radiation. With no backup battery, the two years.
cone in order to use the heater. In addition to fan only runs during daylight hours and will cease
components listed above (in 7), this product 7758B Replacement Motor and
running at night when solar radiation effects are
includes the rain collector, debris screen, Replacement Batteries $70
reduced. Includes fan, solar panel, additional
and bird spikes. radiation shield plates, and hardware.
16. USB Power Cord
7721 Rain Collector and Heater $240 7747 Daytime Fan-Aspirated
Powers the Vantage Vue Console, Vantage Pro2
Radiation Shield Kit PATENTED
Console, WeatherLink Live or the Weather Envoy.
8. RJ Connector Node Adaptor Includes 6.5 ft. (2 m) cable.
Connect sensors with RJ connectors to your
6627 USB Power Cord
EnviroMonitor Node with this adaptor.
P36
Vantage Console Features
Vantage
BAR HUMIDITY RAIN TEMPERATURE WIND WITH OPTIONAL SENSORS
Console
Temp-Hum-Sun-Wind
Outside Temperature
Barometric Pressure
Temperature (Extra)
Inside Temperature
Evapotranspiration
Outside Humidity
Humidity (Extra)
Rainfall Amount
Inside Humidity
Solar Radiation
Wind Direction
UV Radiation
Leaf Wetness
Soil Moisture
Wind Speed
Vantage Pro2 and Vantage Vue
Heat Index
Wind Chill
Dew Point
Rain Rate
UV MEDs
Vantage Pro2 only
Vantage Vue only
2.5 sec
2.5 sec
2.5 sec
50 sec
10 sec
20 sec
20 sec
20 sec
10 sec
10 sec
10 sec
50 sec
80 sec
50 sec
10 sec
10 sec
50 sec
50 sec
1 hour
1 min
1 min
1 min
1 min
Update Interval* The GLOBE Program
®
Students of all ages can
CONSOLE DISPLAYS participate in the worldwide GLOBE
Reading at end of update interval program using protocols developed just
Total amount for the interval for Davis weather stations.
See www.globe.gov for details.
Average reading for the interval
High reading for the interval The name GLOBE and the GLOBE logo are registered
trademarks and service marks. GLOBE Partners and
SET ALARMS for GLOBE schools are granted a limited license for the use
of these trademarks. No other use of these trademarks
Special Alarms 1 2 3 4 5 6
is permitted. This license is granted by the University
High Reading Corporation for Atmospheric Research (UCAR). The
Low Reading source of this material is the GLOBE website at
www.globe.gov. All rights reserved.
DISPLAYED but not graphed
Current Year High NIST-Traceable Sensors
Current Year Low In the USA, the National
Institute of Standards & Technology
GRAPHED & DISPLAYED for last 24 hrs of each of the following (25 hrs for Vantage Vue)
(NIST) develops and maintains the
End-of-15-Minute Period Readings
EOP
Daily Totals
From these companies, NIST-traceable
Monthly Totals intermediate service providers are the next
Storm Totals (with start & end date) link in a network that joins together the
Yearly Totals makers and users of precision instruments.
10-Minute Averages (2 min. for VV) Davis Instruments is proud to provide
AVERAGES
pricing.
Daily Highs
Monthly Highs
Yearly Highs
Hourly Lows
LOWS
Daily Lows
Monthly Lows
Yearly Low
Vantage Pro2
Vantage Vue
rounded to the nearest metric unit
USA Units Metric Units shown in the Resolution column.
0,1 mm Hg 0,8 mm Hg
PRESSURE
Inside Heat Index 0.1°F +30°F to +165°F 3°F 0,1°C –1°C to +74°C 1,5°C
Outside Heat Index Vue 1°F –40° to +165°F 3°F 1°C –40° to +74°C 1,5°C
Outside Heat Index VP2 Sensor Suite 1°F –40° to +165°F 2°F 1°C –40° to +74°C 1°C
Temp/Hum/Wind Index Vue 0.1°F –110° to +165°F 4°F 0,1°C –79° to +74°C 2°C
Temp/Hum/Wind Index VP2 Sensor Suite 0.1°F –110° to +165°F 3°F 0,1°C –79° to +74°C 1,5°C
Temp/Hum/Solar/Wind Index VP2 Sensor Suite 1°F –90° to +165°F 4°F 1°C –68° to +74°C 2°C
Wind Chill Vue 1°F –110° to +135°F 2°F 1°C –79° to +57°C 1°C
Wind Chill Sensor Suite on VP2 1°F –110° to +135°F 2°F 1°C –79° to +57°C 1°C
Wet-bulb 1°F –40° to +150°F 2°F 1°C –40° to +65°C 1°C
Time 1 minute 12/24 hours 8 sec/mo 1 minute 12/24 hours 8 sec/mo
TIME/
DATE
Included *Resolution refers to the number of digits or decimal places displayed on the For complete specifications, visit
Optional sensor required, but shown on console console. For metric units, this is not the actual unit of measure except for www.davisinstruments.com/resources/
Optional and requires WeatherLink. rainfall. Our rain collector measures in true 0.01" or 0,2 mm increments. weather-monitoring/#support then
Solar Energy requires Solar Radiation sensor. All other weather variables are measured and accumulated in US units of click on Specification Sheets.
measure, which are then converted to metric units for display purposes.
6328 Vantage Pro2 Plus Sensor Suite with Fan-Aspirated Rad Shield
Product
No.
Product
No.
Wireless Vantage Pro2 Sensor Suite with 24-Hour Radiation Shield 6323
Wireless Vantage Pro2 Sensor Suite with 24-Hour Radiation Shield & UV Solar 6328
Solar Power Kit for Wireless (includes 1.4 amp hour 6-volt battery) 6614
Heavy Duty Solar Power Kit (includes 12 amp hour 6-volt battery) ** 6612
* Only when used as a separate transmitter for your station’s anemometer. ** Can also be used on wireless stations when more power is needed. *** Can be paired with 6612 and 6614.
Anemometer
Sensor Suite
Sensor Suite Anemometer
Sensor Transmitter
AC Power
Adaptor
Console Console/Receiver
Console/Receiver
Sensor Suite
WeatherLink Live
Soil
moisture
sensors
Wireless console/
receiver in Solar
Temperature probes
Power Kit Vantage Connect WeatherLink Live
GroWeather Console/Receiver
Sensor Suite
Sensor Transmitter Leaf & Soil "Shown" = Live current conditions seen on
w/Temperature/Humidity Moisture/ the LCD display or WeatherLink
Temperature
Sensor Transmitter
Station "Logged" = Stored historical archive records
w/Anemometer
from Weatherlink database
Wireless station
Cabled station with Solar Power Kit
with Heavy (6614) and optional
Duty Solar sensor probe (6475
Power Kit or 6477). Runs on
(6612). batteries or Solar Use Weather Envoy in place of
Power Kit. Vantage Vue or Vantage Pro2 console.
Can be used with one cabled Sensor Suite Transmit to both the Weather Envoy and console Retransmit data to Weather Envoy from console
EXTENSION CABLES
Our Standard 4-Conductor Extension Cables include a coupler kit (protective shell; cable coupler; and five 7876-008 8' (2,4 m)
7876-040 40' (12 m)
waterproof, silicone-filled, crimp-style splice connectors) for joining two cables together, indoors or out. Use the
7876-100 100' (30 m)
chart below to determine maximum cable lengths.
7876-200 200' (61 m)
Included Maximum
Product Cable Use
Cable Length Cable Length
Wireless Vantage Pro2 Anemometer to Sensor Suite 40' (12 m) 240' (73 m)*
Anemometer to Sensor Suite 40' (12 m) 240' (73 m)*
Cabled Vantage Pro2
Console to Sensor Suite 100' (30 m) 1000' (300 m)
Cabled Vantage Pro2 Sensor Suite with Cabled Vantage Connect Vantage Connect to Sensor Suite 100' (30 m) 1000' (300 m)
WeatherLink for Vantage Pro2 and Vantage Vue (serial port versions)** Data Logger to Serial Port 8' (2,4 m) 48' (14,6 m)
Solar Radiation Sensor (6450) Sensor to Sensor Suite 2' (0,6 m) 125' (38 m)
UV Sensor (6490) Sensor to Sensor Suite 2' (0,6 m) 125' (38 m)
Stainless Steel Temperature Probe with RJ Connector (6475) Probe to Wireless Temperature Station, Weather Envoy or
25' (7,6 m) 200' (61 m)
Temperature Probe with RJ Connector (6477) Sensor Transmitter
Leaf Wetness Sensor (6420) Sensor to Wireless Leaf & Soil Moisture/Temperature Station 40' (12 m) 200' (61 m)
Anemometer (6410) Sensor to Sensor Suite or Sensor Transmitter 40' (12 m) 240' (73 m)*
Rain Collector (standalone, 7852) Collector to Sensor Suite or Sensor Transmitter 40' (12 m) 900' (270 m)
Rain Collector with Mountable Base (7857) Collector to Sensor Suite or Sensor Transmitter 40' (12 m) 900' (270 m)
Temperature/Humidity Sensor (6830) (6832) Sensor to Sensor Transmitter 25' (7,6 m) 25' (7,6 m)
* Anemometer Cables: Maximum displayable wind speed decreases as the length of cable increases. At 140' (42 m) of cable, the maximum
wind speed displayed is 135 mph (60 m/s). At 240' (73 m) of cable, the maximum wind speed displayed is 100 mph (45 m/s).
** WeatherLink USB: Extension cables may be purchased from a computer supplier.
To extend the cables on the Temperature Probe (6470), Soil Moisture Sensor (6440), and Rain Collector Heater (7720), please call us directly.
Limited Warranty
We warrant our products to be free of defects in material and workmanship for one year from date of original
purchase. While we make every effort to carefully manufacture our products to the highest standards of
quality, occasionally parts may be found to be missing, defective or damaged. If you have a defective part,
return the product to us, shipping charges prepaid. Include proof of purchase and a written explanation of
the trouble. During the warranty period, we will, at our option, either repair or replace the product free of
charge. This warranty does not cover damage due to improper installation or use, lightning, negligence,
accident or unauthorized service, or to incidental or consequential damages beyond the Davis products
themselves. Implied warranties are limited in duration to the life of this limited warranty. Some states do
not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental and
consequential damages, so the above limitation may not apply to you. This warranty gives you specific legal
rights. You may have other rights, which vary from state to state or country to country.
Details, specifications, and prices are subject to change at any time without notice. Photo credit for front and back cover:
David Mayhew Photography focuses on
30-Day Money-Back Guarantee
skyscapes, capturing unique moments that
If for any reason you are unsatisfied with anything purchased from us, return it within 30 days and we
encapsulate the ever-changing moods of
will gladly refund your purchase price. Shipping charges are not refundable.
mother nature.
The contents of this catalog are the sole property of Davis Instruments and cannot be copied, reproduced or reused Based in Colorado, David specializes in
without written consent from Davis Instruments. Davis, Davis Instruments, the Davis logo, AeroCone, EnviroMonitor, storm chasing and makes his living selling
GroWeather, Vantage Connect, Vantage Pro, Vantage Vue, WeatherLink are registered trademarks of Davis Instruments.
Weather Envoy and Turbo Meter are trademarks of Davis Instruments. his images as art for the home or business.
Windows®, Mac®, Watermark®, Amazon®, Alexa®, iOS®, GLOBE®, App Store®, Google Play® and Android™ are
trademarks of their respective companies. WWW www.davidmayhewphotography.com
Davis Instruments Quality Management System is ISO 9001 certified.
©2019 Davis Instruments Corp. All rights reserved.
davidmayhewphotography
WWW.DAVISINSTRUMENTS.COM
ISO 9001 CERTIFIED COMPANY
Davis.Instruments
@davisinst
davisinstruments
davisinstruments
davisinstruments