Professional Documents
Culture Documents
ADDRESS: PHONE NO :
CAREER OBJECTIVE:
Effective, dynamic, charismatic personality and result oriented person, to work with
existing staff and facilities promoting team spirit, Flexible and versatile – able to
maintain a sense of patience and control under pressure. Poised and competent with
demonstrated ability to easily transcend cultural differences contributing the best of
ability as to improve organizational objectives to achieve its goal and target- in
challenging positions, in oil & gas, power, construction / manufacturing environment,
utilizing experiences in Welding, Quality Management Systems, OHSAS Management
safety, inspection, audit and documentation.
Educational Qualification:
Tertiary:
HIGHER National Diploma of Technology. (Mechanical)
INSTITUTE OF PETROLEUM & ENERGY OF Nigeria, (Lagos). 2012
PROFESSIONAL QUALIFICATION/MEMBERSHIP:
ASNT level II MPI and DPI in Accordance with ASNT-TC-1A. 2015 Edition.
SKILLS:
Excellence Spirit & Integrity
Attention to detail: safety and quality Resourceful and ability to prioritize
Management of Quality. A good team player
Engineering Strategy. Planning and organizational skill
Proficient with Microsoft Office Applications Excellent leadership skill
Risk Assessment, Evaluation &Prevention Good technical ability
Team building and motivational Self-starter
WORK EXPIRIENCE:
Employer: BRIDGSITE NIGERIA LIMITED.
Client: Del-Waste Management/Eroton Exploration & production.
Project: LACT UNIT and Foundation Platform Cawthorn Channel 2&3.
Position: QA/QC Engineer.
Duties:
Reviewing of engineering drawing for Fabrication/construction and installation of the
project.
Ensure effective implementation of QHSE requirements as appropriate in the w/shop and
Site
Supervising shop/site Fabrication and making sure welders work as according to welding
procedure specification (WPS) and standards.
Preparation of Daily Weld Report and documentation of weld summary monitor &
supervise
Control of Base materials and consumables
Quality Control Documentation and Review.
Make Provision for Materials Take Off (MTO)
Interface with Client on All Quality Issues on the Project,
Documentation of All Quality Deliverables on the Project.
Dimensional Control of the Fitting Works.
Welding Quality Control and Mentoring.
Qualification of all the Welders for the Works.
Ensure Close Out Documentations on Design.
Supporting in Quality Control on Other Job’s Prospect.
Provide Support on Quality Control Within the Organization with Emphasis on ISO
Certification.
Supervision of Quality Control Issues on Site.
Ensure All Quality Control Documentation Are Up to Standard.
Period: JUNE 20018, 2019 -------
COMPANY: PETROGAS ENGINEERING SYSTEMS LTD.
PROJECT: Installation of LACT Metering Modules & Equipment (Forcados, Terminal).
CLIENT: NPDC-Nigerian producing Development Company Ltd.
POSITION: QA/QC Engineer.
DUTIES/RESPONSIBILITIES:
Coordination of all quality control activities, including inspection at various stages at Work
shop and Site, example Load Test. Hydro-test, other tests etc…
Reviewing of engineering drawing for construction and installation of Forcados LACT Unit.
Ensure effective implementation of QHSE requirements as appropriate in the w/shop and
Site.
Reviewing/witnessing of QP, ITP, WPS, and PQR & WQT.
Monitoring/witnessing/Reviewing of NDT (E) MPI, RT Operations.
Supervision of Fabrication /Welding and Installation of Pipes Spools & Support Structures.
Supervision of Pre-mob and Load Test of Manitowoc Crane.
Inspection of Validity of Load Cells, Sling Wires and Lifting Gears.
Review of Load Chart/Curve /Radius for Load Test.
Inspection /Supervision of 2000, 1000, Tons M Barges.
Witnessing of ascertaining of Centre of Gravity, SEA Fastening & Mooring of Barges.
Supervision of Lifting and Installation of LACT Unit Skids' and Equipment’s.
Supervision of Installation of LACT Unit Shelter, Citadel Structural Fence, Cage & Wire
Mesh.
Supervision of installation of E&I Devices.
Involve in the Review of As-Built Drawings and Documentation.
Involve/Witnessing of pre-commissioning and Commissioning of Forcados LACT Unit
(Least Automated Cost Transfer). PERIOD: April, 2017 to Jan. 2018.
DUTIES/RESPONSIBILITIES:
Co-ordination of fabrication / welding activities in and out of the workshop.
Training of welders as per ASME IX and AWS D1.1.
Monitoring Non - destructive test and advice welders on improvements.
Developing and implementing a joint-numbering system.
Supervising of daily Welding progress and making daily reports.
Monitoring the Welded Joints to be repaired according to its procedures.
Organized Toolbox Meetings for the Welding Personnel.
Monitoring Fabrication and Installation of Piping systems and Steel Structures.
Preparation of Work Execution Procedures and Following of Programs.
Monitor and report (weekly) Fabrication activities (progress, schedule, area of concerns, etc.)
Follow up NCR / CAR processes as required
To Ensure Implementation of HSEQ requirements is applied, as appropriate in the Workshop
and at site.
PERIOD: January 2012 – Dec. 2012.
PERSONAL OBJECTIVES:
i believe in good thinking - quality product.
i welcome challenges, creativity and innovations.
HOBBIES
REFEREES: