Professional Documents
Culture Documents
Lathe Operations - Od1645 - Lesson 1/pe 1
Lathe Operations - Od1645 - Lesson 1/pe 1
PRACTICAL EXERCISE 1
1. Instructions
2. Requirement
e. What part of the lathe provides a base for the working parts?
g. When cutting threads, what components in the lathe apron engage and
disengage the lead screw?
i. Which type of metals are alloyed with high speed steel cutter bits?
j. The quality of work on the lathe depends largely on what part of the
cutter bits?
k. What type cutter bits are tungsten carbide, tantalum carbide, oxide or
ceramic?
130
LATHE OPERATIONS - OD1645 - LESSON 1/PE 1
o. What type cutter bit is the proper one used for squaring the shoulder of
a workpiece?
s. What type of screw is used to mount the versa-mil to the lathe compound?
v. How many pitch series are used in the American (National) Standard
thread form?
w. What point angle must the tool bit be ground to for an Acme thread?
131