The document provides wiring instructions for connecting an ECU plug to a serial suite. It specifies that the red wire should connect to the 2 pin red connection on the ECU plug for power, the black wire to the 1 pin black connection for ground, and the green wire to the 1 pin green connection for the K Line. It also shows soldering a 680 ohm resistor as pictured for the bootstrap pin connection before continuing with the bootstrap procedure.
The document provides wiring instructions for connecting an ECU plug to a serial suite. It specifies that the red wire should connect to the 2 pin red connection on the ECU plug for power, the black wire to the 1 pin black connection for ground, and the green wire to the 1 pin green connection for the K Line. It also shows soldering a 680 ohm resistor as pictured for the bootstrap pin connection before continuing with the bootstrap procedure.
The document provides wiring instructions for connecting an ECU plug to a serial suite. It specifies that the red wire should connect to the 2 pin red connection on the ECU plug for power, the black wire to the 1 pin black connection for ground, and the green wire to the 1 pin green connection for the K Line. It also shows soldering a 680 ohm resistor as pictured for the bootstrap pin connection before continuing with the bootstrap procedure.