Professional Documents
Culture Documents
Perfect Memory
Perfect Memory
I. Instruction: PROBLEM SOLVING: Provide solution on a separate bond paper (100 points)
1. What is the net area An for the tension member as shown in the figure?
Ans.: _________________________
2. Determine the minimum net area of the plate shown in the figure, assuming 15/16 in, diameter holes
are located as shown:
Ans.: _________________________
3. Determine the net area (An) for the angle given in figure below if 15/16 diameter holes are used?
Ans.: _________________________
4. A hole is drilled (or punched) by 1/16 inch greater than the normal diameter of the fastener (rivet or
bolt). Hole punching causes some damage to the edges of the hole to the amount of 1/32 inch from
each side. What will be the equivalent hole diameter?
Ans.: _________________________
Noted by:
Approved by: