Professional Documents
Culture Documents
COPKO Brochure - EN PDF
COPKO Brochure - EN PDF
Interruptions in electricity
Maintenance Free supplies
at site do not affect the production. Small and compact design ensures
Light weight & COPKO bar bender can be easily carried at any location.”
Portable “Hardened carbon steel rollers and robust steel body
ensures the machine is strong and long lasting.”
No electricity Required
“Rugged structure ensures there are less wear & tear parts”
“Special design and long lever provide mechanical advantage
thereby reducing human effort & labor fatigue to bend rebar”
www.copkogroup.com
• Operate by hydraulic system from Italy, Misubishi Motor from Japan, and Blade from Germany.
• Solenoid Valves Technology results in accury of bending degree.
• Used for bending or folding stirrups in any dimension and from 6 up to 16mm rebar.
• Used 1.5 second per bending stroke.
• High productivity up to 600 stirrups per hour.
• Has large strong bend arm with roller and socket.
• Lightweight bend control lever with wheels for easy transportation.
• Available with single phase 220V systems.
• 1.5 Kw motor with protection devices to prevent damage to the motor in the event of power or
phase failure.
• Additional equipment with 3 Stoppers helps to adjust the length of rebar which is more convenient
to users.
Stirrup Bar Bender SKB-16 has capable of bending rebars at the same time as follow:
Ø 16 mm. can bend 1 rebar (SD50)
Ø 12 mm. can bend 3 rebars (SD50)
Ø 8 mm. can bend 5 rebars (SD50)
Ø 6 mm. can bend 8-10 rebars (SD50)
COPKO manual block cutter is an essential tool for most paving contractors. It can
develop high pressure cutting to cut or split in a straight line using manual manpower. It's
suitable for all types of concrete paving blocks, vibrated concrete, and agglomerates.
The block cutters or block splitters are operated without electricity and can cut a block up
to 41 cm.
It has a spring support shelf for excellent stability while cutting and wheels to ease moving
Our block cutter has screw adjuster to raise or lower upper blade to fit a block in before
cutting. After putting a block in between the upper blade and fixed lower blade, the users
need to push to force the upper blade downwards to apply pressure to snap the block in
line with the blades.
The lever can be adjusted by locking with nut to ensure maximum leverage and making
the best used of the force.
Both upper and lower cutting blade is manufactured by using heat treated and hardened
high carbon steel to ensure an long service life.
- This angle cutter can be easily used by only one person. Our slotted angle
cutter can cut slotted angle and any other steel angle up to 3"W up to 45°, 1-
1/2"D, with maximum thickness of 1/8".
- It has lightweight, movable, can be used instead of hacksaw, and can
easily cut angle steel into small pieces.
- It's durable, easy to use, cheap, save time & cost, reduce human effort
required, and has a good clean cut.