Professional Documents
Culture Documents
Data Header
OVERVIEW
The Well Test Data Header is an assembly used for sampling wellbore production
parameters. Normally mounted in the production flow path immediately upstream
of the well test choke manifold, the Data Header is specifically designed to
provide access points for measuring and monitoring the following conditions:
» Pressure
» Temperature
» Sampling
» Sand Detection
» Chemical Injection
» Safety Systems
An additional Data Header can be installed on the downstream side of the choke
manifold, depending on specific testing or customer requirements.
The data header meets applicable industry standards and can be certified through
third parties to meet global/local requirements.
LEVEL 1 CAPABILITY
SURFACE WELL TESTING
| Level 2 Capability (if applicable)
Equipment Specifications
Notes:
» Different configurations are available upon request.
» Refer to the equipment databook for individual equipment specifications.
» Equipment is designed/certified to API 6A PSL 3, NACE MR0175, CE/PED, NORSOK, etc. standards as applicable and documented on
the individual Equipment Specification Data Sheets (ESDS).
» These ratings are guidelines only. Contact your local Halliburton representative for more information.
Sales of Halliburton products and services will be in accord solely with the terms and conditions
contained in the contract between Halliburton and the customer that is applicable to the sale.