Professional Documents
Culture Documents
2 PDF
2 PDF
1. A) Make the model as per the given sketch by Facing, Step turning & chamfering operations in a
Lathe. Raw Material:Ø 32 mmM.S rod
B) Make the model as per the given sketch by Drilling & Tapping operationsin an Upright
Drilling Machine. Raw Material: 50 mm X 50 mm X 20 mm Mild steel Flat.
2. A) Make the model as per the given sketch byStep turning &Groove cuttingoperationsin a
Lathe. Raw Material:Ø 32 mmM.S rod
B) Make the model as per the given sketch by Drilling & Counter Boring operations in an
Upright Drilling Machine. Raw Material: 50 mm X 50 mm X 20 mm Mild steel.
3. A) Make the model as per the given sketch byStep turning &Taper turning operationsin a Lathe.
Raw Material:Ø 32 mmM.S rod
B) Make the model as per the given sketch by Drilling & Counter Sinking operations in an
Upright Drilling Machine.Raw Material:50 mm X 50 mm X 20 mm Mild steel Flat.
4. A) Make the model as per the given sketch by Step turning &Knurling operationsin a Lathe. Raw
Material:Ø 32 mmM.S rod
B) Make the model as per the given sketch by Drilling and Reaming operations in a Radial
Drilling Machine. 50 mm X 50 mm X 20 mm Mild steel Flat.
5. A) Make the model as per the given sketch by Step turning &Left hand thread
cuttingoperationsin a Lathe. Raw Material:Ø 32 mmM.S rod
B) Make the model as per the given sketch by Drilling and Reaming operationsin a Radial
Drilling machine. Raw Material:50 mm X 50 mm X 20 mm Mild steel Flat.
6. A) Make the model as per the given sketch by Step turning &Right hand thread
cuttingoperationsin a Lathe. Raw Material:Ø 32 mmM.S rod
B) Make the model as per the given sketch by Drilling & Counter Boring operationsin an Upright
Drilling Machine. Raw Material:50 mm X 50 mm X 20 mm Mild steel Flat.
Note:
1. The dimensions can be given by the External Examiner based on the machineriesand tools
available.
2. Lathe & Drilling diagram is separately given in Annexure. TheExternal Examiner is requested
to take sufficient copies as per requirement.
ALLOCATIONOFMARKS