Professional Documents
Culture Documents
Unit 2 Typing and Editing: Structure
Unit 2 Typing and Editing: Structure
Structure
2.0 Introduction
2.1 Objectives
2.2 Typing and Revising Text
2.5 Summary
2.0 INTRODUCTION
This unit describes the various features related to typing and revising text, selecting text as a group, instead
of a letter or word at a time.
Most Word Processing efforts, whether a note to yourself or an annual report, are created through an
iterative process. of typing & editing. In this unit, we briefly cover some simple ways of revising
documents.
With Word, you can search a document for specific characters, formats, or styles using the Find & Replace
command.
Various editing & proofing tools including spell check have been explained. Word's spelling feature is used
to check, an entire document or a block of selected text against Word's built-in dictionary or against
specialized dictionaries that you. create.
2.1 OBJECTIVES
After going through this unit, you will be able to
MS-Word automatically moves the text to the next line when it reaches the right edge of the screen. This
feature is known as word-wrap. When you end a paragraph, word inserts a non-printing character called a
paragraph mark ( ). To display all non printing characters, click the show/hide button on the standard
toolbar.
1. Selecting text
As well as dragging over the text to select it, you can select text by clicking actions. The actions you
perform depend on what you want to do. The options are:
a) Selecting a word;
d) Selecting paragraphs;
i. The easiest way to select a word is to double-click anywhere on the word. The selected
text then appears reversed (or highlighted).
ii. One way to select a complete line of text is to drag the cursor over it.
A simple way to achieve this is to click in the left margin beside the line (the cursor
appears s a white arrow).
To select several lines drag the mouse in the left margin beside the text you require.
iii. To select an entire sentence hold down the key and click anywhere in the sentence. Note
that the punctuation mark (if any), and the space following the sentence is also selected.
iv. You can select a paragraph by clicking three times anywhere within the paragraph.
Alternatively, this can be done by double clicking in the left margin beside the paragraph.
v. To select the block of text click at the beginning of the first line then press "Shift" as you
click at the end of the last line you wish to select.
vi. To select the whole document click three times in the left margin. .Alternatively, you can
do this by pressing the "CTRL" key and clicking in the left margin.
2. Deleting Text
Text can be deleted by using either the "Delete" or "Backspace" keys. Delete removes single characters to
the right of the cursor, while backspace removes single characters to the left.
Block deletions make it easy to delete sentences, paragraphs and sections of documents. Once you have
selected the text you wish to remove, pressing the "Delete" or "Backspace" key removes it from the
document.
3. Inserting Text
MS-Word offers several ways of inserting text into an existing document. The simplest among all, is to
move the cursor to the required position and start typing. The existing text will be pushed and adjusted
accordingly.
Place the mouse pointer (the I-beam) where you want to being inserting text.
Next, press and release the mouse button to move the insertion point to the desired locations.
4. Replacing Text
Word can combine the steps of deleting unwanted text, positioning the insertion point, and inserting
replacement text.
To replace text:
• The selected text will be removed and the new text accommodated.
• "Moving" means to remove (cut) the selected text or graphic from one location and insert it in
another location.
• "Copying" means to make a copy of the selected text or graphic and insert it in another location,
leaving the original unchanged.
Cut, Copy & Paste
The procedures used to cut, copy and paste are similar to window's editing procedures. If a portion of the
text is to be moved to a different place, select the text to be moved and then use the cut option in the edit
menu. The selected text will be copied to the clipboard in Windows. Now the Paste option is enabled in the
Edit menu. To paste the text that is in the clipboard at some position in the document, place the cursor at
the starting point of insertion and choose Edit Paste. The text will be pasted there.
If the text to be pasted elsewhere is only to be copied but not removed from its original position then
• Choose the Edit Paste option to paste a copy of the selected text.
The paste option can be repetitively used once the copy operation is .made. To try these operations type the
following lines of text:
Example:
If you choose to do a complete installation, can tell the installer which items you want to install.
Now, select the word you from the example above. Choose Edit → Copy. The text will be copied to the
Clipboard. Now place the cursor after the comma and choose the Edit → Paste option. Again place the
cursor between the words items and 'want' and repeat the paste operation. The final text should look like
this.
If you choose not to do a complete installation, you can tell the installer which items you want to install.
• Open any two documents one after the other using the File menu.
• Choose the Window → Arrange All option. The two documents are displayed in a separate
windows on the screen. The active window is indicated by the highlighted title bar.
• To activate a document window of your choice just click on that document with the mouse
pointer. The individual documents can be re-sized according to convenience using the size- boxes
in the lower-right corners of the window.
• Now copy the portion of the document desired to be copied to the other document on to the
clipboard using Edit → Copy option.
• Change the focus of input to the other document and place the cursor at the point of insertion.
If you don't see the symbol you're looking for, you may need to select a different font in the font box,
which shows all of the fonts installed on your system. All fonts based on the ANSI or ASCII character set
are listed as Normal Text.
The Special Characters tab includes additional characters such as em and en spaces, em and en dashes,
nonbreaking hyphens, nonbreaking spaces, (C), and (R).
To display and print a particular symbol, Word needs both the screen font and the printer font that contain
that symbol. If you have installed only the printer font, the symbols may be printed properly but may not be
displayed correctly.
Example:
The Find dialog box can be used to specify the direction in which the Find operation is to be done. To do
this use the Search option in the dialog box. Choose
• Down - To search the specified text from the current position to the end of document.
Special search requests like Match Case or Use Pattern Searching can be used. If the Match Case option is
not checked out then MS-WORD finds all the instances of the text specified, irrespective of upper or lower
case characters. For example, if the text to be found is given as "New York" then "NEW YORK". "new
york", are also found as matching text.
The Find Whole Words Only option can be used to make searches on complete words only. If not
checked out, all matching patterns of texts are shown. For example, if the word " man" is to be searched
and replaced by the word "woman", then if the above option is not checked, this would lead to a search for
all words containing the word "man" (e.g., words like "human", "manner", "Manmohan" are also found by
M S-WORD).
The use Pattern Matching option helps to find text of a particular pattern only. If a particular pattern of text
is required to be found, then the Wild card characters or Operators can be used. The operators are:
• < text - To find a text with the specified text at the end. For example, <con finds convey, conduct,
contract, etc.
• > text - To find a text with the specified text at the end. For example, >ion matches position, transition,
portion etc.
In the same manner the Any Letter and Any Digit options can be used.
The Sounds Like option can be used to search for words that sound alike but are spelt differently. Words
like byte, bite, etc., are sound alike patterns. The user has to be a little alert while using this option
(available in the Find dialog box), because MS-Word searches according to what patterns sound similar.
Use the Find -> Replace option to replace the text found, matching the specifications in the Find Dialog
box. This is a very useful feature using which one can make fast editing in the existing document at specific
locations. For example, a business letter can be addressed to a new person by replacing the old person's
name with the new person's name but retaining the rest of the format and style.
Example:
In the Replace dialog box (example above) one can make a global replacement of text of the next pattern to
verify if replacement is necessary and commit replacement.
• Locate possible grammatical or stylistic errors, suggest improvements and help you evaluate, the
readability of your text.
The Spelling Checker provides a convenient way of correcting spelling mistakes in your documents. It
compares the words in your document against its own dictionary.
You should always check your documents with the Spelling Checker before you print them.
You start the Spelling Checker via the "Spelling" command in the "Tools" menu or by clicking the
"Spelling" button.
The Spelling Checker automatically checks the active document.
When the Spelling Checker locates a word it cannot find in the dictionary it stops, highlights the offending
word, and display it on the "Not in Dictionary" line.
The "Suggestions" box lists possible alternatives to the word. If it cannot find a close match this box will be
empty.
To retain the word, choose Ignore and to ignore the change at all its occurrences in the document Choose
Ignore All.
To change the word, choose Change and to change the word at all its occurrences in the document choose
Change All
To add the current selected word into the dictionary choose the Add button.
You have the choice to add the word to the default Word custom dictionary, or a new custom dictionary
that you create. You create new customs dictionaries via the Options button.
Before you add a word to a dictionary, check that it is spelled correctly, otherwise it will be assumed that
the misspelled word is correct.
If you have any doubts, check the word with a paper dictionary before you add it.
The Speller Checker is not foolproof and will not catch a mistake if you accidentally type in another word.
The Spelling, Checker does not understand the context in which the word is used in the sentence.
Exclude Dictionaries
An exclude dictionary contains words that the main dictionary recognizes as being spelled correctly, but
which you want questioned during a spelling check. For example, if you prefer "theatre" rather than
"theater" add "theater" to the exclude dictionary so that word will question it and you can change it.
Once you create an exclude dictionary, Word uses it automatically with the main dictionary. If you want to
check spelling without using the exclude dictionary, rename the exclude dictionary before checking
spelling.
1. In a new, empty document, type the words that you want to put in the exclude dictionary. After
typing each word, press ENTER to make each word a separate paragraph.
2. From the file menu, choose Save As. Make sure that you save the exclude dictionary in the same
directory that contains the main dictionary.
4. In the file name box, type a name for the exclude dictionary. In Windows, the exclude dictionary
must have the same name as the main language dictionary with which it is associated, except that
it must have the filename extension EXC.
5. Choose the OK button. If words asks you to confirm that you want to save the file with formatting
that will not be saved in text format, choose the 'Yes button, and then choose the Text only button.
6. When you finish creating the exclude dictionary, click the, spelling button on the Standard toolbar.
You can determine how strictly Word observes grammar and style rules by using rule groups. Word
provides three rule groups-formal, business, and casual-which you can customize to observe or ignore
specific grammar or style rules. You can also create up to three of your own custom rule groups.
It is for you to decide whether another word improves the meaning of the sentence.
For some words, you may also find antonyms (words with opposite meanings) and related words.
• Manually hyphenate text by choosing the Manual button in the Hyphenation dialog box. This
command is useful for hyphenating part of a .document or for specifying where to insert hyphens
in specific words.
• Insert nonbreaking hyphens in hyphenated compounds or phrases that you don't want broken at a
hyphen, such as Stratford-upon-Avon. Word will move the entire compound or phrase to a new
line rather than break it.
The first three methods insert optional hyphens, which Word uses only when a word or phrase falls at the
end of a line. To view optional hyphens, choose Options from the Tools menu, and then select the View
tab. Under Nonprinting Characters, select the Optional Hyphens check box and choose the OK button.
Click the Show / Hide ¶ button on the Standard toolbar. Optional hyphens appear as the " - " symbol.
1. US.DIC
2. SCIENCE.DIC
3. CUSTOM.DIC
4. FRENCH.DIC
2. The keyboard shortcut keys for undoing the modifications made to a document are:
1. Alt + Z
2. Shift + Z
3. Tab + Z
4. Ctrl + Z
2.5 SUMMARY
After going through this unit', you must have learnt various ways of editing text. You must have learnt how
the use of find-Command facilitates the repeated occurrence of a word or text in the document.
Construction of standard documents such as menus, proposals and contracts which incorporates frequently
used addresses can be made easier with AutoText and AutoCorrect entries. All the editing tools described
in this unit help you develop and refine the content of your documents.