This leak test report documents the bubble test of an item. The test subjected parts and nozzles to specified test pressures and recorded the actual pressures applied. Any parts that did not hold pressure or showed bubbles were noted as needing repair. Reinforcement pad welds were also air pad tested through telltale holes for 5 minutes to check for leaks. The report was prepared, reviewed and dated by multiple parties.
This leak test report documents the bubble test of an item. The test subjected parts and nozzles to specified test pressures and recorded the actual pressures applied. Any parts that did not hold pressure or showed bubbles were noted as needing repair. Reinforcement pad welds were also air pad tested through telltale holes for 5 minutes to check for leaks. The report was prepared, reviewed and dated by multiple parties.
This leak test report documents the bubble test of an item. The test subjected parts and nozzles to specified test pressures and recorded the actual pressures applied. Any parts that did not hold pressure or showed bubbles were noted as needing repair. Reinforcement pad welds were also air pad tested through telltale holes for 5 minutes to check for leaks. The report was prepared, reviewed and dated by multiple parties.
Job No : - Item Name : - Client : - Item No. : - Project : - Date Tested : -
PRESSURE (PSIG) RESULT
No PART/NOZZLE NO. REMARK SPEC ACTUAL ACC REPAIR 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 THE BELOW ITEMS HAVE BEEN AIR PAD TEST ON REINFORCEMENT PAD WELDMENT THROUGH TELL TALE HOLE FOR A MINIMUM HOLDING TIME : 5 MINUTE