This liquid penetrant testing report summarizes the inspection of an EGR pipe made of stainless steel SS316L. The pipe underwent a solvent cleaning surface preparation and was tested in an AMI workshop under 1756 lux lighting. Four areas of the welded surface were examined and found to have no relevant indications based on the MCP-2010 penetrant, MCC-1010 remover, and MCD-3010 developer used. The inspection was performed and reviewed according to the specified standards and procedures, and the item was accepted.
This liquid penetrant testing report summarizes the inspection of an EGR pipe made of stainless steel SS316L. The pipe underwent a solvent cleaning surface preparation and was tested in an AMI workshop under 1756 lux lighting. Four areas of the welded surface were examined and found to have no relevant indications based on the MCP-2010 penetrant, MCC-1010 remover, and MCD-3010 developer used. The inspection was performed and reviewed according to the specified standards and procedures, and the item was accepted.
This liquid penetrant testing report summarizes the inspection of an EGR pipe made of stainless steel SS316L. The pipe underwent a solvent cleaning surface preparation and was tested in an AMI workshop under 1756 lux lighting. Four areas of the welded surface were examined and found to have no relevant indications based on the MCP-2010 penetrant, MCC-1010 remover, and MCD-3010 developer used. The inspection was performed and reviewed according to the specified standards and procedures, and the item was accepted.