Professional Documents
Culture Documents
Non allowable but repair procedure is given in SRM: Refer. Figure 004 / 55-32-11-283-002
(SHEET 1) - Allowable and Repairable Damage Size for Surface Damage at Leading
Edges in Zone C. and Table 5 - Allowable and Repairable Damage Limits for Surface
Damage at the Leading Edges in Zones A, B and C. Rev. 143, Nov 01/22
Non allowable and repair procedure is NOT given in:
12. Action taken: Perform TASK 55-32-11-300-019 Skin Repairs in Ram Air Area / Monolithic
Center Portion (Wet Lay Up) (Wet lay up). REV.143, NOV 01/22.