Panels 481AL and 471AR on an Airbus A320 aircraft were found to have damage during a base maintenance check. The damage includes completed perforations on the monolithic area edge in zone 2 of the panels. Based on the aircraft maintenance manual, this type of damage is allowable but requires a permanent repair procedure to be performed. The recommended repair procedure will be performed to address the panel damage.
Original Description:
Original Title
Example #3-Sdr-23-052-A662- Nrc20-Panel 481 Al and 471ar Damaged
Panels 481AL and 471AR on an Airbus A320 aircraft were found to have damage during a base maintenance check. The damage includes completed perforations on the monolithic area edge in zone 2 of the panels. Based on the aircraft maintenance manual, this type of damage is allowable but requires a permanent repair procedure to be performed. The recommended repair procedure will be performed to address the panel damage.
Panels 481AL and 471AR on an Airbus A320 aircraft were found to have damage during a base maintenance check. The damage includes completed perforations on the monolithic area edge in zone 2 of the panels. Based on the aircraft maintenance manual, this type of damage is allowable but requires a permanent repair procedure to be performed. The recommended repair procedure will be performed to address the panel damage.
5. A/C Model: A320-214 MSN:06738 6. Current FH: 21701:39 A/C REG.: VN-A662 Current FC: 13104 7. ATA: 54 8. Damage found during: Base maintenance check type: C03/PH5/24MT 9. Zone: 400 Transit check Other: 10. Detail of damage: Refer. NRC # 20 PANEL 481AL AND 471AR ARE DAMAGED P/N: N/A S/N: N/A ATA: 54 Classification Dimension Location: Crack COMPLTED PERFORATION Corrosion DAMAGE ON MONOLITHIC AREA Debonding SEE PICTURE EDGE - ZONE 2 Dent Erosion Other dimension: Scratch Other: COMPLETED PERFORATION Additional information : Sketch / Photo : Detail See pages: 2,3 11. Damage assessment: Allowable Non allowable but repair procedure is given in SRM. Figure 016 / 54-50-00-283-006 (SHEET 1/3) - Allowable Damages in Zone 2 - Complete Perforation on Monolithic Area Edge - CFM56-5 Engine Pylon after Modification 33844P8341.TASK 54-50-00-283-006.COMPOSITE COMPONENTS, REV.#144, FEB 01/23 Non allowable and repair procedure is NOT given in SRM 12. Action taken: Perform TASK 54-50-00-300-022-Permanent Repair Type B for Pylon Karman Panels and Pylon Movable Fairings. REV.#144, FEB 01/23 13. Action Request: N/A 14. Reported by: 15. Received by: Name: TRẦN THỊ BÍCH THỦY Name: TRẤN THỊ BÍCH THỦY Signature: Signature: Date: 19/3/2023 Date: 19/3/2023
جدول سيولة الخزينة وفق النظام المحاسبي المالي الجديد رؤية تحليلية ديناميكية للمؤسسات الاقتصادية الجزائرية the Statement of Cash Flows According to the New Financial Accounting System a Dynamic Analytical Vision of Alg