Professional Documents
Culture Documents
Two adsorption columns are used alternately to allow constant output during regeneration using 12 hours as
regeneration cycl
proper control an
Number of hours per batch 12 hours
Molecular Weights
Water 0.018015 kg/mol Go to:
Ethanol 0.04607 kg/mol http://webbook.nist.gov/cgi/fl
Isopropanol 0.0601 kg/mol and you will find that the spec
Feed components
Water 108472 mol/hr
Ethanol 7095 mol/hr
Isopropanol 5.5 mol/hr Do you think 5 decimal points here really
make a big difference in the final
solution?
Volume of feed batch (gas)
Water 39249.73454 m3
Ethanol 2607.460071 m3
Isopropanol 2.021286877 m3
Total feed volume, Q 41859.21589 m3 What are the SOLIDS invol
though you were loading
and ethanol on solid adsor
Feed concentration, cF 0.09379933 kg/m3
Bed Area, A 5 m2 *Area is tweaked so that the the bed diameter and l
Bed Diameter 2.523132522 m
LES 5.609094857 m
LUB 1.869698286 m *Assumption: Since there is lack of experimental da
http://webbook.nist.gov/cgi/fluid.cgi?Action=Load&ID=C7732185&Type=SatP&Digits=5&THigh=101&TLow=99&TInc=1&RefState=D
and you will find that the specific volume of steam at 100oC and 1.0 atm = 1.6718 m3/kg
hat the the bed diameter and lengths are ratioed to allow a balance between capital cost and pressure requirements (approximately b
here is lack of experimental data, let LUB equal one quarter of total bed length (i.e. one third of LES)
ow=99&TInc=1&RefState=DEF&TUnit=C&PUnit=atm&DUnit=kg%2Fm3&HUnit=kJ%2Fmol&WUnit=m%2Fs&VisUnit=uPa*s&STUnit=N
Pump
Regeneration: Energy Requirements