Professional Documents
Culture Documents
flameproof enclosure NC
2
2
121
II 2 G Ex d IIC T6-T5 Gb, II 2 D Ex tb IIIC DbT85°C-T100°C IP65
1/4 3 1
FEATURES
• S
olenoid valves with explosionproof operator MB type for use in potentially explosive
atmospheres according to ATEX Directive 2014/34/EU
EC type examination certificate no.: LCIE 03 ATEX 6059 X
IECEx Certificate of Conformity no.: IECEx LCI 09.0001X
• Compliance with the Essential Health and Safety Requirements has been
assured by compliance with the International and European Standards
EN-IEC 60079-0, EN-IEC 60079-1 and EN 60079-31
• Solenoid operator type MB can be fitted to 3/2 and 4/2 series 231 and 232 valves
GENERAL
Differential pressure 0 to 40 bar [1 bar = 100 kPa]
Maximum viscosity 40 cSt (mm2/s)
Response time 15 - 25 ms
fluids (✴) (2) temperature range (TS) seal materials (✴)
water, air, inert gas, oil - 10°C to + 80°C NBR (nitrile)
TEMPERATURE CLASSIFICATION
AC (~) solenoids - operator type MB DC (=) solenoids - operator type MB
solenoid size maximum ambient °C (1) solenoid size maximum ambient °C (1)
Pn surface temperature Pn surface temperature
3/2 - 2/2
3/2 - 4/2
(watt) T6 T5 T4 T3 (watt) T6 T5 T4 T3
Availability, design and specifications are subject to change without notice. All rights reserved.
5 0,36 6 0 3,5 3,5 3,5 3,5 12 10 12100148 12100935 12100149 12100995 MB301/O-5
base@basesistemas.com
Zaragoza, 976 587 019
https://basesistemas.com/suministro-y-venta-de-elementos-de-instrumentacion-y-control-industrial/
SOLENOID VALVES SERIES 121
OPTIONS
• Threaded 2/2 NO; 3/2 NO/U solenoid valves and pad mount 3/2 NC/U solenoid valves
• C
oil class H
AC (~) DC (=)
Pn T6 T5 T4 T3 Pn T6 T5 T4 T3
(watt) 85°C 100°C 135°C 200°C (watt) 85°C 100°C 135°C 200°C
14 - - 40°C - 12 40°C 60°C - -
• IECEx-ATEX cable gland certified, 3/4 NPT, installed on solenoid valve, supplied with cable clamp:
- for non-armoured cable of 8.5 to 16 mm dia., catalogue number 660510
- for armoured cable of ID 8.5 to 16 mm / OD 12 to 21 mm, catalogue number 660514
• FPM seals (fluoroelastomer)
• Marine paint/anti-corrosive environment
• Oxygen service, catalogue number 970500
• Impulse-type manual operator
INSTALLATION
• Solenoid valves must always be installed with solenoid head downwards
• Secured by one threaded hole in bottom (threaded version), or four holes in sub-base (pad mounting version)
• Pipe connections (G*) have standard combination thread according to ISO 228/1 and ISO 7/1
• Replacement coils available
93 + 18 1 150
93 + 18 1 150
62+18 1 2 94 56
5 62+18 1 94 56
17 44 2 5
G1/4 17 44
3 3 G1/4
360°
1
360°
117(2/2) + 100
129(3/2) + 100
2/2:
131(2/2) + 100
143(3/2) + 100
1
- NC/NO supply at port 2.
135 + 100
3/2: 35
- NC supply at port 1; = =
60
1 2
= =
- NO, supply at port 3
35
- U: supply at port 1, 2 or 3 1
ØA 41 3 4
41 3 4xØ6
TYPE 03 TYPE 04
Operator type "MB" Operator type "MB"
Aluminium Aluminium
Assembly of pad mount version Assembly of pad mount version
on 3/2 valve series 231 (G3/8 -G1/2) on 4/2 valve series 232 (G3/8 -G1/2)
Ex d IIC T6-T5 Gb - Ex tb IIIC T85°C-T100°C Db IP65 Ex d IIC T6-T5 Gb - Ex tb IIIC T85°C-T100°C Db IP65
263 (3/8) + 2 x 18 1
Availability, design and specifications are subject to change without notice. All rights reserved.
299 (3/8) + 2 x 18 1
94 56 341 (1/2) + 2 x 18
94 56 391 (1/2) + 2 x 18
62+2x18 1 62+2x18 1
44 2 5 62+2x18 1 62+2x18 1
44 2 5
17 17 17
17
360°
360°
198 (3/8) + 100 1
36 (3/8 )
198 (3/8) + 100 1
36 (3/8 )
214 (1/2) + 100
50 (1/2 )
214 (1/2) + 100
50 (1/2 )
145 (3/8) -161 (1/2)
2 2 4
44 (3/8)
60 (1/2)
44 (3/8)
60 (1/2)
45 (3/8 )
1 3 50 (1/2 ) 3 1
ØA
58 (3/8 ) 105 (3/8) - 145 (1/2) 3 8,5(3/8)
8,5(3/8) 96 (3/8 ) 123 (3/8) - 170 (1/2) ØA 3xØ 3
66 (1/2 ) 3xØ 10,5(1/2)
10,5(1/2) 100 (1/2 )
237 (3/8) - 316 (1/2 ) 273 (3/8) - 366 (1/2 )
orifice size
type ØA function weight (2)
(mm) 1 Dimension to be added per version to allow for removal
1/4 2/2 1,5..6 1,475
01 2 3/2 NC: exhaust protector
1/4 3/2 1,5/3/5 1,445
02 pad mount 3/2 1,5/3/5 1,46 3 Manual operator location, button (optional in series 231and 232)
50040GB-2016/R01
base@basesistemas.com
Zaragoza, 976 587 019
https://basesistemas.com/suministro-y-venta-de-elementos-de-instrumentacion-y-control-industrial/