You are on page 1of 13

JBL Incorporated, 8500 Balboa Boulevard, P.O. Box 2200, Northridge, California 91329 U.S.A.

Technical Manual

JBL EON518S/230
SPECIFICATIONS

ACOUSTIC & ELECTRICAL SPECIFICATIONS: SYSTEM COMPONENTS: (CONT’D)


• Systen Power Rating: 500W continuous, 1000W peak (stereo) to balance XLR satellite
• Frequency Response: 42 Hz –100 Hz (±3 dB) outputs. 1/4” Speaker level input
• Frequency Range: 36 Hz -130 Hz (-10 dB) • XLR Pin Assignments: Pin 2 (+), Pin 3 (-), Pin 1 (GND)
• Input Gain: - infinity to +4 dBu • Suspension/ Mounting: 36 mm pole socket on the top
• Input Impedance: Nominal 20K ohms (balanced)
• Maximum SPL: 129 dB, 1 watt @ 1 meter AURAL SWEEP TEST SPECIFICATIONS:
• Crossover Frequency: 120 Hz (HPF switchable on outputs) A. System Aural Sweep Test: 500mV Input, 20 Hz to 500 Hz
Sweep Duration: 5 seconds
SYSTEM COMPONENTS: B. L.F. Aural Sweep Test: 3.5V Input, 10 Hz to 300 Hz
• Cabinet Enclosure (Not for Sale) PHYSICAL SPECIFICATIONS:
• Baffle/Grille Assembly: 441958-001
• Enclosure Dimensions: 617 x 569 x 652 mm D
• Low Frequency 268G, 460 mm (18 in) Differential
(24.3 x 22.4 x 25.7 in D)
Transducer: Drive® integated woofer with dual
voice coils, 4 ohm impedance • Shipping Weight: 65 lb (29.5 kg.)
• DC Resistance: 2.60 ohm ±10% WARRANTY INFORMATION:
• Input Connectors: Balanced XLRs with loop through • Refer to Warranty Statement packed with each product.

PACKAGE Warranty 59660 WIRING DIAGRAM


Owner’s Manual Driver, Low Freq.
Top / Bottom Inner, (2) 364822-001 268G
364817-001 (Available on (364481-001X)
web-site only) Cone Repl
PKG, Microfoam C4R268
49790P
20” x18” sheets

Carton
364816-001
- +
Cord, AC, Line
425-00000-00 120V
425-00000-01 230V

RED

BLK

Amplifier Assembly JBL EON518S/230 REV H

01-10
COMPONENT EXPLODED VIEW
JBL EON518S/230
Amp Board Screw (12)
442983-001 804-41110-12
Pole Cup 10-32 x 3/4
443406-001 Input Module PAN,PH,BLK,
Logo Assembly 443226-001 ZINC,LCS
365393-001 Screw (3)
Bezel 806-41010-20 AC Inlet PCB Amplifier Gasket
Defuser Logo 364423-001 1/4-20 x 1/14 443228-001 364811-001
364810-001 FLT,PH,UNC,
Screw (4) Enclosure Assembly BLK,ZINC,LCS SMPS
Logo Terminal Plate 365008-060 443227-001
Assembly EON518S
60MM, M5 SOCHD,PB (Not Available for Gasket,
365170-001 Short Bezel 364808-001
Sale)
(pole cup) KURLY LOK (2)
Baffle/Grille Assembly 925-00005-01
441958-001

Handle Bar
Assembly (2)
Handle Cup (2) 364855-001
364854-001
Gasket, Handle (2) Screw (8)
443367-001 Screw (8) 815-73414-15
Gasket, Port (2) 365008-020 M5x0.8x15MM
365447-001 20mm, M5 SOCHD,HEX-
Screw Screw (18) SOCHD, PB SOCK-BLK
Logo, EON Grille 802-41010-12 365008-060 Foot (4)

JBL EON518S/230
364656-001 60mm, M5 SOCHD,PB Driver, Low Freq. 353445-001
Grille Assembly 6-32 x 3/4
365432-002 PAN,PH,PB, (short bezel) 268G
BLK ZINC, (364481-001X) Screw (4)
Screw (15) LCS Stick-on, Bumper Cone Repl Dust Dome 884-41110-12
884-41110-12 (Logo) 350922-001 C4R268 71133-03 10 x 3/4
10-32 Blk PAN,PH,PB, BLK
PAN,PH,PB Screw (8) Gasket,Rear (4) ZINC, LCS
BLK ZINC, 804-01110-16 60578
LCS 10-32 x 1 18” cork
FIL,PH,BLK ZINC, adh/back
LCS

You might also like