Professional Documents
Culture Documents
Engine Oil Rifle Pressure - Data Valid But Below Normal Operational Range - Moderately
Severe Level
Fault Code: 143 Engine Oil Rifle Pressure - Data Possible reduced engine performance.
PID(P), SID(S): P100 Valid But Below Normal
SPN: 100 Operational Range - Moderately
FMI: 18 Severe Level. Engine oil pressure
Lamp: Amber signal indicates engine oil
SRT: pressure is below the engine
protection warning limit.
Circuit Description:
The engine control module (ECM) provides a 5 volt supply to the engine oil pressure sensor on the sensor supply
circuit. The ECM also provides a ground on the sensor return circuit. The engine oil pressure sensor provides a signal
to the ECM on the engine oil pressure sensor signal circuit. This sensor signal voltage changes based on the pressure
in the oil rifle. The ECM will detect a low signal voltage at operating conditions when the oil pressure may be slightly
lower. The ECM will detect a high signal voltage during high engine speeds or operating conditions when the oil
temperature is low.
Component Location:
The engine oil pressure sensor is located in the oil rifle.
© 2008 Cummins Inc., Box 3005, Columbus, IN 47202-3005 U.S.A. Printed from QuickServe® Online.
All Rights Reserved. Last Modified: 25-Jan-2013
File: 176-fc143 Page 2 of 3
Action Taken When the Fault Code is Active:
• The ECM illuminates the amber CHECK ENGINE lamp immediately when the diagnostic runs and fails.
Shop Talk:
This fault code goes active when the engine oil pressure drops below the engine protection limit. Troubleshoot the
engine for low oil pressure.
© 2008 Cummins Inc., Box 3005, Columbus, IN 47202-3005 U.S.A. Printed from QuickServe® Online.
All Rights Reserved. Last Modified: 25-Jan-2013
File: 176-fc143 Page 3 of 3
© 2008 Cummins Inc., Box 3005, Columbus, IN 47202-3005 U.S.A. Printed from QuickServe® Online.
All Rights Reserved. Last Modified: 25-Jan-2013