RUCI NUGROHO NPM 16,310,005 ELECTRICAL ENGINEERING AND COMPUTER INFORMATION PINTAR PINTAR PARKIR DESIGN BASED ON ATMEGA 328 IN THE INDUSTRIAL AND TRADING SERVICE OF KEBUMEN REGENCY
Final Project: 62 pages
Technological advances also help in the development of better security systems. One of them is making progress in the field of vehicle parking, both two-wheeled and four- wheeled vehicles. currently parking is still using a conventional parking system that only uses parking lots and also often does not pay attention to the capacity of the parking lot owned. Based on these problems, the authors make smart parking design based on Atmega 328. This research method uses Research & Development with the following steps: Potential and Problems, Gathering Information, Product Design, Design Validation, Product Trial, Product Revision, Trial Use, Product Revision, and Mass Product Manufacturing. The design of Atmega 328-based smart parking is supported by push buttons and ultasonic sensors as input to open the doorstop then servo motor and LCD 16X2 as output to open and count the available parking lots. This tool is expected to make parking more effective and efficient Keywords: Atmega 328, Smart Parking, Push Button, Ultrasonic Sensor.