Professional Documents
Culture Documents
Universal Transmitter
Alarm/Trip Module
www.masibus.com sales@masibus.com
Technical Specifications
Input Communication (Option)
Thermocouple (E, J, K, T, B, R, S, N), Interface RS485 (2 Wire)
Input Type
RTD (PT-100), mA ,mV, V & Protocol Modbus-RTU
Resistance Baud rate 4800, 9600, 19200
Display Range Refer Table-1
Refer Table-1 Transmitter Power Supply 24VDC (±1V) @30mA
Accuracy
ADC Resolution 17 bits Power Supply
Display Resolution 0.1 / 1°C Standard 85-265VAC/ 125-300VDC
Sampling Time < 75ms Optional 18-36VDC
CJC Error ±2.0 °C Max Power consumption < 10 VA
Sensor Burnout current Isolation (Withstanding voltage)
0.5uA
Between primary terminals* and secondary terminals**: At least 1500 V AC for 1 minute
RTD excitation current 1mA Approx. Between secondary terminals**: At least 500 V AC for 1 minute
NMRR * Primary terminals indicate power terminals and relay output terminals.
> 50 dB ** Secondary terminals indicate I/O terminals and Communication Port.
CMRR > 120 dB Physical
Temp-co < 100ppm/°C Dimensions (mm) 75(H) x 55(W) x 110(D)
Input Impedance > 1MΩ for Voltage, Din Rail
Mounting
100Ω for Current 2
Terminal Cable Size 2.5 mm
Max Voltage 20VDC
Weight < 250 grams
Display & Keys
Enclosure Material ABS
Process Value 0.3" Four-digit Seven segment, IP20
Enclosure Protection
Red LED
Status Power, RL1, RL2, Tx, Rx Environmental
Keys 3 keys for configuration, calibration Operating temperature 0 to 55 °C
and operation Storage temperature 0 to 80 °C
Output Humidity 20 to 95 % RH non-condensing
Relay (Option)
Table 1: Display Range
Relays 2 Nos.
Input Type Ranges Accuracy
Type Single Change over (C, NO, NC)
Thermocouple E -200 to 1000 °C
Rating 2A @ 230VAC / 30VDC -200 to 1200 °C
J
AO1 K -200 to 1370 °C ±0.1% of FS
Output Signal 4-20mA/ 0-20mA @ 750Ω Max.
T -200 to 400 °C
1-5VDC/ 0-5VDC/ 0-10VDC @ 4KΩ Min. N -200 to 1300 °C
Output accuracy ±0.25% of span R 0 to 1750 °C
Temp-co < 150ppm/°C S 0 to 1750 °C ±0.25% of FS
AO2 (Option) B 450 to 1800 °C
Output Signal 4-20mA/ 0-20mA @ 750Ω Max. RTD Pt-100 -199.9 to 850 °C
1-5VDC/ 0-5VDC/ 0-10VDC @ 4KΩ Min. Voltage -10 to 500mV
0/0.4 to 20mV
Output accuracy ±0.25% of span
0 to 5V ±0.1% of FS
Temp-co < 150ppm/°C 1 to 5V -1999 to 9999
0 to 10V
Current 0/4 to 20mA
Resistance 0 to 2000Ω
Ordering Code
Model Input Type APS No of O/P O/P type-1 O/P type-2 Relay o/p Communication
UT-94 X XX X X X X X
85-265 VAC/
1 E U1 1 One 1 4-20mA 0 None N None N None
125-300 VDC
2 J U2 18-36 VDC 2 Two 2 0-20mA 1 4-20mA Y Yes Y RS485
3 K 3 1-5VDC 2 0-20mA
4 T 4 0-5VDC 3 1-5VDC
5 B 5 0-10VDC 4 0-5VDC
6 R S Special 5 0-10VDC
7 S S Special
8 N
9 Pt-100
C 4-20 mA
D 0-20 mA
E 1-5 VDC
F 0-5 VDC
G 0-10 VDC
W 0.4-2 VDC
X -10-500 mV
Y 0-2 V
Z 0-2000 Ohms
S Special
Head Office:
Masibus Automation And Instrumentation Pvt. Ltd. All specifications are subject to change without notice
B-30, GIDC Electronics Estate, Sector-25, Gandhinagar-382044, Gujarat, India. due to continuous improvements.
Tel: +91 79 23287275-79, Fax: +91 79 23287281 Doc. Ref. UT94/R4F/1216
E-mail: sales@masibus.com, Web: www.masibus.com