You are on page 1of 19

SOUTH DELHI MUNICIPAL CORPORORATION

NAME OF WORK-Improvement/Construction of spl repair work in SDMC Pratibha Boys School Chattarpur Mandir in
Chattarpur ward no 70/sz
S.N. DESCRIPTION OF ITEM Nos L B H QUANTITIES
Demolishing cement concrete manually/ by mechanical means
1/15.2.1 including disposal of material within 50 metres lead as per direction
of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c
equivalent design mix) L.S. 2.00

Demolishing brick work manually/ by mechanical means including


stacking of serviceble material and disposal of unserviceble material
2/15.7.4
within 50 metres lead as per direction of Engineer-in-charge. : In
cement mortar. L.S. 5.00

Providing and fixing Ist quality ceramic glazed wall tiles conforming to
IS: 15622 (thickness to be specified by the manufacturer), of
approved make, in all colours, shades except burgundy, bottle green,
black of any size as approved by Engineer-in-Charge, in skirting,
risers of steps and dados, over 12 mm thick bed of cement mortar
3/11.36 1:3 (1 cement : 3coarse sand) and jointing with grey cement slurry @
3.3kg per sqm, including pointing in white cement mixed with pigment
of matching shade complete

1 6.7 1.5 10.05


1 5.4 1.5 8.1
18.15

Steel work welded in built up section/framed work including cutting,


hoisting, fixing in position and applying a priming coat of approved
4/10.25.2 steel primer using structural steel etc. as required . In gratings,
frames, guard bar, ladders, railings, brackets, gates and similar
works. L.S. 200.00
200.00

Providing and laying Ceramic glazed floor tiles 300x300 mm


(thickness to be specified by the manufacturer) of 1st quality
conforming to IS :15622 of approved make in all colours such as
6/11.37
White, Ivory, Grey, Fume Red Brown laid on 20 mm thick cement
mortar 1:4 (1 cement :4 coarse sand) including pointing the joints
with white cement and matching pigment etc. complete.
2 6.6 5.4 71.28

Providing and fixing water closet squatting pan (Indian type W.C.pan)
with 100 mm sand cast Iron P or S trap,10 litre low level white P.V.C.
flushing cistern with manually controlled device (handle lever)
7/17.1.1 conforming to IS :7231, with all fittings and fixtures complete
including cutting and making good the walls and floors wherever
required: White Vitreous china Orissa pattern W.C.pan of size 580 x
440 mm with integral type foot rests
1 1

Providing and fixing white vitreous china pedstal type water closet
(European type W.C.pan) with seat and lid, 10 litre low level white
P.V.C. flushing cistern with manually controlled device (handle lever),
8/17.2.1
conforming to IS :7231, with all fittings and fixture complete including
cutting and making good the walls and floors wherever required :
W.C.pan with ISI marked white solid plastic seat and lid

1 1

Providing and fixing wash basin with C.I. brackets,15 mm C.P. brass
piller taps, 32mm C.P.brass waste of standard pattern, including
9/17.7.1 painting of fittings and brackets, cutting and making good the walls
wherever required : White vitreous China; Wash basin size 630 x 450
mm with a pair of 15 mm C.P.brass piller taps
1 1

Providing and fixing 600 x 450 mm bevelled edge mirror of superior


glass (of approved quality) complete with 6 mm thick hard board
10/17.31
ground fixed to wooden cleats with C.P.brass screws and washers
complete:

1 1

11/17.29 Providing and fixing 100 mm sand cast Iron grating for gully trap

1 1

Providing and fixing white vitreous china flat back or wall corner type
12/17.23 lipped front urinal basin of 430 x 260 x 350 mm and 340 x 410 x 265
mm sizes respectively. 1 1

Providing and fixing G.I.pipes complete with G.I.fittings and


clamps,including cutting and making good the walls etc. (Internal
14/18.11.1 work): Concealed pipe including painting with anti corrosive
bitumastic paint,cutting chases and making good the wall; 15 mm
dia.nominal bore 1 12 12
Providing and fixing PTMT bib cock of approved quality and colour:
15/18.54.1
15mm nominal size, 86mm long, weighing not less than 88gms.
4 4

Providing and fixing PTMT stop cock of approved quality and colour:
16/18.55.1
15mm nominal size, 86mm long, weighing not less than 88gms

2 2

Excavating trenches of required width for pipes, cables, etc. including


excavation for sockets, and dressing of sides, ramming of bottoms,
depth upto 1.5 m including getting out the excavated soil, and then
returning the soil as required, in layers not exceeding 20 cm in depth
17/2.10.1.2
including consolidating each deposited layer by ramming, watering,
etc. and disposingl of surplus excavated soil as directed, within a
lead of 50 m: All kinds of soil: Pipes, cables etc. exceeding 80 mm
dia but not exceeding 300 mm dia.
1 7 7

Providing and laying non-pressure NP2 class (light duty) R.C.C.pipes


with collers jointed with stiff mixture of cement mortar in the
18/19.6.4
proportion of 1:2 (1 cement :2 fine sand0 including testing of joints
etc.complete : 300 mm dia R.C.C.pipe 1 6 6

Brick work with F.P.S. bricks of class designation 75 in foundation and


20/6.1.2
plinth in: Cement mortar 1:6 (1 cement: 6 coarse sand)
L.S. 15.00

Half brick work with F.P.S. bricks of class designation 75 in


21/6.13.2 superstructure above plinth level up to floor V level: in cement mortar
1:4 (1 cement: 4 coarse sand)
L.S. 15.00

22/13.16.1 6 mm cement plaster to ceiling of mix : 1:3 (1 cement :3 fine sand)


L.S. 150.00

23/13.4.2 12 mm cement plaster of mix : 1:6 (1 cement :6 coarse sand)


L.S. 300.00

Colour washing such as green,blue or buff to give an even shade:


24/13.39.1 New work (two or more coats) with a base coat of white washing with
lime L.S. 200.00

Distempering with dry distemper of approved brand and manufacture


25/13.40 (two or more coats) and of required shade on new work,over and
including priming coat of whiting to give an even shade: L.S. 1000.00

Painting with synthetic enamle paint of approved brand and


26/13.61.1 manufacture to give an even shade : Two or more coats on new
work L.S. 200.00
Cement concrete flooring 1:2:4 (1 cement :2 coarse sand :4 graded
stone aggregate) finished with a floating coat of neat cement
28/11.3.1
including cement slurry,but excluding the cost of nosing of steps etc.
complete. 40 mm thick with 20mm nominal size stone aggregate 2 6.7 5.6 75.04

10 cm thick (average) mud phaska of damped brick earth on roofs


laid to slope consolidated and plastered with 25 mm thick mud mortar
mixed with bhusa @ 35 kg per cum of earth and gobri leaping with
mix 1:1 (1 clay : 1 cow dung) and covered with flat tile bricks, grouted
31/12.16.1 with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of
integral water proofing compound by weight of cement and finished
neat :

With common burnt clay F.P.S.(non modular) brick tile of class


designation 10.
1 70.4 8.5 598.40

Washed stone grit plaster on exterior walls of height upto 10 metre


above ground level, in two layers, under layer 12mm cement plaster
1:4 (1cement: 4 coarse sand), furrowing the under layer with
32/13.72 scratching tool, applying cement slurry on the under layer @ 2 Kg of
cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1
cement: 1/2 coarse sand :2 stone chipping 10mm nominal size), in
panels with groove all around as per approved pattern, including L.S. 50.00
scrubbing and washing the top layer with brushes and water to
expose the stone chippings, complete as per specification and
direction groove
Forming of Engineer-in- charge
of uniform size (Payment
in the top for providing
layer grooves
of washed stoneshall
grit
be made
plaster asseparately).
per approved pattern using wooden battens, nailed to the
under layer, including removal of wooden battens, repair to the edges
33/13.73.1 of panels and finishing the groove complete as per specifications and
direction of the Engineer-in-charge :

15 mm wide and 15 mm deep groove 1 230 65.00


fixing of 3 mm thick translucent white acrylic sheet panes in steel
37/approved window or celestory window shutter with self taping screws of size
item 10x3 mm including drilling where neccesary complete as per
direction of engineer in charge. L.S. 70.00

Providing and laying in position cement concrete of specified grade


excluding the cost of centring and shuttering-All work upto plinth evel:
38/4.1.10
1:5: 10 (1 cement: 5 coarse sand: 10 graded stone aggregate 40 mm
nominal size) L.S. 15
15.00

Providing and laying 60 mm thick factory made cement concrete


interlocking paver block of M-30 grade made by block making
machine with strong vibratory compaction and of approved size and
39/16.68 design/ shape laid in required colour and pattern over and including
50 mm thick compacted bed of course sand, filling the joints with
coarse sand etc. all complete as per the direction on Engineer-in-
charge.
1 62 3 186

A.E. J.E
SOUTH DELHI MUNICIPAL CORPORORATION

NAME OF WORK-Improvement/Construction of spl repair work in SDMC Pratibha Boys School Chattarpur Mandir in
Chattarpur ward no 70/sz
S.N. DESCRIPTION OF ITEM QUANTITIES Rate Unit Amount

1/15.2.1 Demolishing cement concrete manually/ by mechanical means including


disposal of material within 50 metres lead as per direction of Engineer - in -
charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) 2.00 997.05 cum 1994

Demolishing brick work manually/ by mechanical means including stacking


2/15.7.4 of serviceble material and disposal of unserviceble material within 50
metres lead as per direction of Engineer-in-charge. : In cement mortar.
5.00 842.75 cum 4214

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS:
15622 (thickness to be specified by the manufacturer), of approved make,
in all colours, shades except burgundy, bottle green, black of any size as
3/11.36 approved by Engineer-in-Charge, in skirting, risers of steps and dados, over
12 mm thick bed of cement mortar 1:3 (1 cement : 3coarse sand) and
jointing with grey cement slurry @ 3.3kg per sqm, including pointing in
white cement mixed with pigment of matching shade complete

18.15 744.8 sqm 13518

Steel work welded in built up section/framed work including cutting,


hoisting, fixing in position and applying a priming coat of approved steel
4/10.25.2
primer using structural steel etc. as required . In gratings, frames, guard
bar, ladders, railings, brackets, gates and similar works.
200.00 85.95 kg 17190

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to


be specified by the manufacturer) of 1st quality conforming to IS :15622 of
6/11.37 approved make in all colours such as White, Ivory, Grey, Fume Red Brown
laid on 20 mm thick cement mortar 1:4 (1 cement :4 coarse sand) including
pointing the joints with white cement and matching pigment etc. complete.
71.28 688.35 sqm 49066

Providing and fixing water closet squatting pan (Indian type W.C.pan) with
100 mm sand cast Iron P or S trap,10 litre low level white P.V.C. flushing
cistern with manually controlled device (handle lever) conforming to IS :
7/17.1.1
7231, with all fittings and fixtures complete including cutting and making
good the walls and floors wherever required: White Vitreous china Orissa
pattern W.C.pan of size 580 x 440 mm with integral type foot rests
1.00 3494.2 each 3494

Providing and fixing white vitreous china pedstal type water closet
(European type W.C.pan) with seat and lid, 10 litre low level white P.V.C.
flushing cistern with manually controlled device (handle lever), conforming
8/17.2.1
to IS :7231, with all fittings and fixture complete including cutting and
making good the walls and floors wherever required : W.C.pan with ISI
marked white solid plastic seat and lid

1.00 3395.45 each 3395

Providing and fixing wash basin with C.I. brackets,15 mm C.P. brass piller
taps, 32mm C.P.brass waste of standard pattern, including painting of
9/17.7.1 fittings and brackets, cutting and making good the walls wherever required :
White vitreous China; Wash basin size 630 x 450 mm with a pair of 15 mm
C.P.brass piller taps
1.00 2298.5 each 2299

Providing and fixing 600 x 450 mm bevelled edge mirror of superior glass
10/17.31 (of approved quality) complete with 6 mm thick hard board ground fixed to
wooden cleats with C.P.brass screws and washers complete:

1.00 817.95 each 818

11/17.29 Providing and fixing 100 mm sand cast Iron grating for gully trap

1.00 29.25 each 29

Providing and fixing white vitreous china flat back or wall corner type lipped
12/17.23 front urinal basin of 430 x 260 x 350 mm and 340 x 410 x 265 mm sizes
respectively. 1.00 930.75 each 931

Providing and fixing G.I.pipes complete with G.I.fittings and


14/18.11. clamps,including cutting and making good the walls etc. (Internal work):
1 Concealed pipe including painting with anti corrosive bitumastic
paint,cutting chases and making good the wall; 15 mm dia.nominal bore
12.00 285.7 mtr 3428
15/18.54. Providing and fixing PTMT bib cock of approved quality and colour: 15mm
1 nominal size, 86mm long, weighing not less than 88gms.
4.00 103.3 each 413

16/18.55. Providing and fixing PTMT stop cock of approved quality and colour: 15mm
1 nominal size, 86mm long, weighing not less than 88gms

2.00 103.3 each 207

Excavating trenches of required width for pipes, cables, etc. including


excavation for sockets, and dressing of sides, ramming of bottoms, depth
upto 1.5 m including getting out the excavated soil, and then returning the
17/2.10.1. soil as required, in layers not exceeding 20 cm in depth including
2 consolidating each deposited layer by ramming, watering, etc. and
disposingl of surplus excavated soil as directed, within a lead of 50 m: All
kinds of soil: Pipes, cables etc. exceeding 80 mm dia but not exceeding 300
mm dia.
7.00 225.45 mtr 1578

Providing and laying non-pressure NP2 class (light duty) R.C.C.pipes with
collers jointed with stiff mixture of cement mortar in the proportion of 1:2 (1
18/19.6.4
cement :2 fine sand0 including testing of joints etc.complete : 300 mm dia
R.C.C.pipe 6.00 518.55 mtr 3111

Brick work with F.P.S. bricks of class designation 75 in foundation and plinth
20/6.1.2
in: Cement mortar 1:6 (1 cement: 6 coarse sand)
15.00 4751.65 cum 71275

Half brick work with F.P.S. bricks of class designation 75 in superstructure


21/6.13.2 above plinth level up to floor V level: in cement mortar 1:4 (1 cement: 4
coarse sand)
15.00 684.2 sqm 10263

22/13.16.
6 mm cement plaster to ceiling of mix : 1:3 (1 cement :3 fine sand)
1 150.00 143.8 sqm 21570

23/13.4.2 12 mm cement plaster of mix : 1:6 (1 cement :6 coarse sand)


300.00 160.35 sqm 48105

24/13.39. Colour washing such as green,blue or buff to give an even shade: New
1 work (two or more coats) with a base coat of white washing with lime
200.00 23.6 sqm 4720

Distempering with dry distemper of approved brand and manufacture (two


25/13.40 or more coats) and of required shade on new work,over and including
priming coat of whiting to give an even shade: 1000.00 71.85 sqm 71850

26/13.61. Painting with synthetic enamle paint of approved brand and manufacture to
1 give an even shade : Two or more coats on new work
200.00 78.4 sqm 15680
Cement concrete flooring 1:2:4 (1 cement :2 coarse sand :4 graded stone
aggregate) finished with a floating coat of neat cement including cement
28/11.3.1
slurry,but excluding the cost of nosing of steps etc. complete. 40 mm thick
with 20mm nominal size stone aggregate 75.04 362.6 sqm 27210

10 cm thick (average) mud phaska of damped brick earth on roofs laid to


slope consolidated and plastered with 25 mm thick mud mortar mixed with
31/12.16. bhusa @ 35 kg per cum of earth and gobri leaping with mix 1:1 (1 clay : 1
1 cow dung) and covered with flat tile bricks, grouted with cement mortar 1:3
(1 cement : 3 fine sand) mixed with 2% of integral water proofing compound
by weight of cement and finished neat :

With common burnt clay F.P.S.(non modular) brick tile of class designation
10.
598.40 596.7 sqm 357065
Washed stone grit plaster on exterior walls of height upto 10 metre above
ground level, in two layers, under layer 12mm cement plaster 1:4 (1cement:
4 coarse sand), furrowing the under layer with scratching tool, applying
cement slurry on the under layer @ 2 Kg of cement per square metre, top
layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand :2 stone
32/13.72
chipping 10mm nominal size), in panels with groove all around as per
approved pattern, including scrubbing and washing the top layer with
brushes and water to expose the stone chippings, complete as per
50.00 582.6 sqm 29130
specification and direction of Engineer-in- charge (Payment for providing
grooves shall be made separately).

Forming groove of uniform size in the top layer of washed stone grit plaster
as per approved pattern using wooden battens, nailed to the under layer,
33/13.73.
including removal of wooden battens, repair to the edges of panels and
1
finishing the groove complete as per specifications and direction of the
Engineer-in-charge :

15 mm wide and 15 mm deep groove 65.00 34.4 meter 2236


fixing of 3 mm thick translucent white acrylic sheet panes in steel window or
37/appro
celestory window shutter with self taping screws of size 10x3 mm including
ved item
drilling where neccesary complete as per direction of engineer in charge.
70.00 976.9 sqm 68383

Providing and laying in position cement concrete of specified grade


excluding the cost of centring and shuttering-All work upto plinth evel: 1:5:
38/4.1.10
10 (1 cement: 5 coarse sand: 10 graded stone aggregate 40 mm nominal
size) 15.00 3959.7 cum 59396

Providing and laying 60 mm thick factory made cement concrete


interlocking paver block of M-30 grade made by block making machine with
strong vibratory compaction and of approved size and design/ shape laid in
39/16.68
required colour and pattern over and including 50 mm thick compacted bed
of course sand, filling the joints with coarse sand etc. all complete as per
the direction on Engineer-in-charge.
186.00 615.7 sqm 114520
1007088

1007088
Add 16% Enhancement 161134
1168222
Add 5% Contigencies 58411
1226633

Say Rs. 1226633

A.E. J.E.
SOUTH DELHI MUNICIPAL CORPORORATION

NAME OF WORK-Improvement/Construction of spl repair work in SDMC Pratibha Boys School Chattarpur Mandir in
Chattarpur ward no 70/sz
S.N. DESCRIPTION OF ITEM QUANTITIES Rate Unit Amount

1/15.2.1 Demolishing cement concrete manually/ by mechanical means including


disposal of material within 50 metres lead as per direction of Engineer - in -
charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) 2 997.05 cum 1994

Demolishing brick work manually/ by mechanical means including stacking


2/15.7.4 of serviceble material and disposal of unserviceble material within 50
metres lead as per direction of Engineer-in-charge. : In cement mortar.
5 842.75 cum 4214

Providing and fixing Ist quality ceramic glazed tiles conforming to IS :15622
(thickness to be specified by the manufacture) of approved make in all
colours, shades except burgundy, bottle green, black of any size as
3/11.36 approved by Engineer-in-charge in skirting, risers of steps and dados over
12 mm thick bed of cement mortar 1:3 (1 cement :3 coarse sand) and
jointing with grey cement slurry @ 3.3 kg per sqm including pointing in
white cement mixed with pigment of matchig shade complete.

18.15 744.8 sqm 13518

Steel work welded in built up section/framed work including cutting,


hoisting, fixing in position and applying a priming coat of approved steel
4/10.25.2
primer using structural steel etc. as required . In gratings, frames, guard
bar, ladders, railings, brackets, gates and similar works.
200 85.95 kg 17190

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to


be specified by the manufacturer) of 1st quality conforming to IS :15622 of
6/11.37 approved make in all colours such as White, Ivory, Grey, Fume Red Brown
laid on 20 mm thick cement mortar 1:4 (1 cement :4 coarse sand) including
pointing the joints with white cement and matching pigment etc. complete.
71.28 688.35 sqm 49066

Providing and fixing water closet squatting pan (Indian type W.C.pan) with
100 mm sand cast Iron P or S trap,10 litre low level white P.V.C. flushing
cistern with manually controlled device (handle lever) conforming to IS :
7/17.1.1
7231, with all fittings and fixtures complete including cutting and making
good the walls and floors wherever required: White Vitreous china Orissa
pattern W.C.pan of size 580 x 440 mm with integral type foot rests
1 3494.2 each 3494

Providing and fixing white vitreous china pedstal type water closet
(European type W.C.pan) with seat and lid, 10 litre low level white P.V.C.
flushing cistern with manually controlled device (handle lever), conforming
8/17.2.1
to IS :7231, with all fittings and fixture complete including cutting and
making good the walls and floors wherever required : W.C.pan with ISI
marked white solid plastic seat and lid

1 3395.45 each 3395

Providing and fixing wash basin with C.I. brackets,15 mm C.P. brass piller
taps, 32mm C.P.brass waste of standard pattern, including painting of
9/17.7.1 fittings and brackets, cutting and making good the walls wherever
required : White vitreous China; Wash basin size 630 x 450 mm with a pair
of 15 mm C.P.brass piller taps
1 2298.5 each 2299

Providing and fixing 600 x 450 mm bevelled edge mirror of superior glass
10/17.31 (of approved quality) complete with 6 mm thick hard board ground fixed to
wooden cleats with C.P.brass screws and washers complete:

1 817.95 each 818

11/17.29 Providing and fixing 100 mm sand cast Iron grating for gully trap

1 29.25 each 29

Providing and fixing white vitreous china flat back or wall corner type lipped
12/17.23 front urinal basin of 430 x 260 x 350 mm and 340 x 410 x 265 mm sizes
respectively. 1 930.75 each 931

Providing and fixing G.I.pipes complete with G.I.fittings and


clamps,including cutting and making good the walls etc. (Internal work):
14/18.11.1
Concealed pipe including painting with anti corrosive bitumastic
paint,cutting chases and making good the wall; 15 mm dia.nominal bore
12 285.7 mtr 3428
Providing and fixing PTMT bib cock of approved quality and colour: 15mm
15/18.54.1
nominal size, 86mm long, weighing not less than 88gms.
4 103.3 each 413

Providing and fixing PTMT stop cock of approved quality and colour:
16/18.55.1
15mm nominal size, 86mm long, weighing not less than 88gms

2 103.3 each 207

Excavating trenches of required width for pipes, cables, etc. including


excavation for sockets, and dressing of sides, ramming of bottoms, depth
upto 1.5 m including getting out the excavated soil, and then returning the
17/2.10.1. soil as required, in layers not exceeding 20 cm in depth including
2 consolidating each deposited layer by ramming, watering, etc. and
disposingl of surplus excavated soil as directed, within a lead of 50 m: All
kinds of soil: Pipes, cables etc. exceeding 80 mm dia but not exceeding
300 mm dia.
7 225.45 mtr 1578

Providing and laying non-pressure NP2 class (light duty) R.C.C.pipes with
collers jointed with stiff mixture of cement mortar in the proportion of 1:2 (1
18/19.6.4
cement :2 fine sand0 including testing of joints etc.complete : 300 mm dia
R.C.C.pipe 6 518.55 mtr 3111

Brick work with F.P.S. bricks of class designation 75 in foundation and


20/6.1.2
plinth in: Cement mortar 1:6 (1 cement: 6 coarse sand)
15 4751.65 cum 71275

Half brick work with F.P.S. bricks of class designation 75 in superstructure


21/6.13.2 above plinth level up to floor V level: in cement mortar 1:4 (1 cement: 4
coarse sand)
15 684.2 sqm 10263

22/13.16.1 6 mm cement plaster to ceiling of mix : 1:3 (1 cement :3 fine sand)


150 143.8 sqm 21570

23/13.4.2 12 mm cement plaster of mix : 1:6 (1 cement :6 coarse sand)


300 160.35 sqm 48105

Colour washing such as green,blue or buff to give an even shade: New


24/13.39.1
work (two or more coats) with a base coat of white washing with lime
200 23.6 sqm 4720

Distempering with dry distemper of approved brand and manufacture (two


25/13.40 or more coats) and of required shade on new work,over and including
priming coat of whiting to give an even shade: 1000 71.85 sqm 71850

Painting with synthetic enamle paint of approved brand and manufacture to


26/13.61.1
give an even shade : Two or more coats on new work
200 78.4 sqm 15680
Cement concrete flooring 1:2:4 (1 cement :2 coarse sand :4 graded stone
aggregate) finished with a floating coat of neat cement including cement
28/11.3.1
slurry,but excluding the cost of nosing of steps etc. complete. 40 mm thick
with 20mm nominal size stone aggregate 75.04 362.6 sqm 27210
Providing and laying in position cement concrete of specified grade
excluding the cost of centring and shuttering-All work upto plinth evel: 1:5:
30/4.1.10
10 (1 cement: 5 coarse sand: 10 graded stone aggregate 40 mm nominal
size) 15 3959.7 cum 59396

Providing and laying 60 mm thick factory made cement concrete


interlocking paver block of M-30 grade made by block making machine
with strong vibratory compaction and of approved size and design/ shape
31/16.68
laid in required colour and pattern over and including 50 mm thick
compacted bed of course sand, filling the joints with coarse sand etc. all
complete as per the direction on Engineer-in-charge.
186 615.7 sqm 114520
550273

550273
Add 16% Enhancement 88044
638317

A.E. J.E.
SOUTH DELHI MUNICIPAL CORPORATION

NAME OF WORK-Improvement/Construction of spl repair work in SDMC Pratibha Boys School Chattarpur
Mandir in Chattarpur ward no 70/sz
HEAD OF A/C:
ALLOCATION :
PREVIOUS BOOKING
ESTIMATE NO- THIS ESTIMATE: 1226633
DIV S.N. H/A WARD YEAR TOTAL BOOKING:
M-S-IV 70/S 2019-2020
DSR 2016
CEMENT- Private
STEEL- nil
TIME- 3 months
LAND- SDMC

a)Specification of existing work-

b)Year of construction-

c)justification requirement for praposed work-

d)Any other information-

A-Proposed specification-

B-Method of construction-Through Contract

1- That the above work is not covered under any other estimate/scheme prepaired earlier.
2- That there is no splitting up of workin the instant case.

Junior Engineer

Certified that the work is required as per site condition and estimate amounting to Rs 1226633

may Please be administratively approved along with expenditure sanction.

Executive Engineer M-S-IV Assistant Engineer


SOUTH DELHI MUNICIPAL CORPORATION

NAME OF WORK-Improvement/Construction of spl repair work in SDMC Pratibha Boys School Chattarpur Mandir
in Chattarpur ward no 70/sz

TENDOR AMOUNT: 550273

EARNEST MONEY :2% Of tendor ammount

TIME OF COMPLITION: 3 months

SECURITY :10 % of tendor ammount

CEMENT : Private.

THIS MAY BE TREATED AS FORM NO 27 A PLEASE

EE M-S-IV A.E. J.E.


SOUTH DELHI MUNICIPAL CORPORATION
NOTICE INVITING TENDOR
1-Item rate/ Percentage rate tendors are invited on behalf of the SDMCfrom approved & eligible contractor of SDMC

NAME OF WORK-Improvement/Construction of spl repair work in SDMC Pratibha Boys School Chattarpur Mandir in Chattarpur ward no 70/sz
1.1- The work is Estimated cost to Rs- 1226633
This estimate,however is given merely as a rough guide.
1.2-Tendors will be issued to eligible SDMC contractors provided they produce definite proof from the appropriate autherity,
which shall be to be satisfaction of the competent autherity,of having satisfactory completed similor works of magnitude
specified below:-
1.3.1 For work Estimated to cost above Rs 25 lacks Three similar works each costing not less than Rs ….
but upto Rs 2 crores Lacks during last 5 years.
1.3.2 For work Estimated to cost above Rs 2 crore Three similar works each costing not less than Rs 75
but upto Rs 3 crores Lacks during last 5 years.
1.3.3 For work Estimated to cost above Rs 3 crore Three similar works each costing not less than Rs 1
but upto Rs 5 crores crore during last 5 years.
1.3.4 For work Estimated to cost above Rs 5 crore Three similar works each costing not less than Rs2
crores or two similor works of agg.cost not less than.
Rs 6crores during last 7 years.
For the purpose of this clause Similor work means the works of…………………………..

2-Agreement shall be drawn with the successful tendor on prescibed Form no A-33,A-34 which in available as a SDMC
publication,Tendor shall be quote his rates as per various terms & conditions of the said form which will from part of the
Aggrement.
3-The time allowed for carrying out the work will be….months from the 10th day after the date of written orders to commence
the work or from the first date of handing over of the site,whichever is later,in acordence with the phasing ,if any,indicated
in the tendor documents.
the site of work is available.
OR
The site for the work shall be made available in parks as spesified below:-
5-Recipt applications for issue of forms will be stopped by 1600 hrs.four days from the date fixed for opening of tendors.
Issue of Tendor forms will be stopped 3 Days before the date fixed for opening of tendors.
Tendor documents consisting of plans, spesifications,the shedule of quantities of the various classes of the work to be done
& the set of the terms & conditions of contract of be compiled with by the contractor whose tendor may be accepted &
other necessary document can be seen in the office of the EE-M.S.-IV between hours 11.00AM & 4.00P.M. every day exept on
Sunday & public holidays.Tendor document excluding stander form will be issued from his office during the hours
spesified above on payment of Rs 500/ in cash.
6- The tender must produse an income tax clearance certificate in the revised form as modified under Ministry of Finance
O.M.No.67/30/69/ITAL dated 2.7.1970 as amended from time to time before tendor pepers can be sold to him.
7- Tendors which should always be placed in sealed envelope with the name of work & due date written on the envolope,
will be received by the EE-M.S-IV up to 3.00 P.M. on……………… & will be opened by him in his office on the same day at
3.30P.M.
8- The tendor shall be accompanied by earnest money (unless exempted) of Rs……….. In cash /Deposit at call recipt of a
Shedulded bank issued in faver of "Commisioner SDMC" The ammount being credited to ……………….A contractor
exempted from depositing earnest money in individual cases shall attach with the tendor & attested copy of lettor
exempting him from depositing earnest money & shall produse the orignal when called upon to do so.
9- The descriptoipn of the work is As follows -
copy of the f\ other drawing and documents pertaining to the works will be open for inspection by the tenders at the office
of the abovce mentiopned officers
Tenders are advised to inspect and examined the side and sourroundings and satify them selves before submitted theirs
tenders as to the nature of the grounds and sub soil ( so far5 as practiceble )
The form and nature of the side the means of the Access to the side the accommaodation the may require and in general
shall them self obtain all necessary infoirmation as to risks contingencies and other circumstances which may infulance
or effect their tender. A tenderer shall be deemed to have full knowledge of the side whether he inspects it or not and no extra
extra charges consequent on sny misstsndaring or otherwise shall be allowed. The tenderer shall responsible for arraanging
and maininting at his own cost all metrials tools and plants water electricty access facilites for workers and all other
services required for excuiting the work unless and otherwise specifically provided for in the contract documents
and has made himself aware of the scope and specification of the work tyo be done and of conditions and rates as
which stores tools and plants etc will be issued to him but the department and local condition and other factors having
a bearinbg on the execution of the work .
10. The competent authority on behalf of the SDMC does not bind himself to except the lowest or any other tender
and reserves to himself the authority to reject any or all of the tenders received without the assignment of a reasons
all tenders in which any of the perscribed conditions are not fullfilled or are incomplete in any respect are liable to be
rejected .
11. Canvassing whether directly or indirectly - In connection with tenders is strictly prohibited and the tenders submitted
by the contractors who resort to canvassing will be liable to rejection.
12. The competent authority on behalf of SDMC reserves to himself the right of accepting thewhole or any part of the tender
and the tenders shall be bound to perform the same aty the rate quoted.
13. The contractors shall not be permitted to dender for works in SDMC circle (responsible for excution of contracts) in which
his near relatives is posted at devisional accounts or as an officer in any capcity between the grades of SE, AE ( both
inclusive) he shall also intimate the names of persions who are working with him in any capacity or are subsequently
employed be him and who are near relatives to any category A/B officers in SDMC, Any breach of this conditions by the
contractor would render him liable to be removale from the approved list of the contractors of the department .
14. No engineering of asst engineer rak or other officvers equivelent to assistant engineer rank employed in engineering
or administrative dutiees and engineer department of SDMC/ Govt is allowed to work as contractor for a period of two years
after his retirement from govt service without the previous permission of the department in writing this contractors isa liable to
to the contractoris liable to be cancelled if whether the contractor or any of his employees is found any time to such a person
who had not obtained the permission of the department as aforesaid before submission of the tender engagement of the
contractor service.
15. The tender for the works shall remain to open for exceptance for a period of a day from the date of opending of
tender if any tender withdraw his tender before the said period or makes any modifications in the terms and conditions
of the tender which are not acceptable to the department then the Govt shall without prejudice to any other right or
remidy be at liberty to forfit 50% of the said earnest money as a aforesaid.
16. This notice inviting tender shall form apart of the contract document the successful tenderer/contractor on acceptance
of his tender by the accepting authority shall within 15 days from the stipulated time of start of the work signed the
contractors consisting of -
(a) The notice inviting tender, all the documents including addition conditions specification and drawing if any
forming the tender as issued at the time of invition of the time and acceptance thereof together with any correspondance
leading thereto .
(b) Standard SDMC form A- 33/ A- 34.

EE M-S-III A.E. J.E.


Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portion
well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average)
ab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4coarse sand) laid and jointed with cement slurry and pointing with w
slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all comple
d polishing etc. all complete as specified and as directed by the Engineer-in-Charge : a. Flamed finish granite stone slab Jet Black, Cherry
ne slab Jet Black, Cherry Red, Elite Brown,Cat Eye or equivalent.

You might also like