Professional Documents
Culture Documents
English
Bedienungsanleitung
Mode d’emploi
Manuale dell'utente
Deutsch
Manual de instrucciones
Manual do proprietário
Gebruikershandleiding
Français
Italiano
Español
Português
Nederlands
Owner’s Manual
Before using this unit, carefully read the sections entitled: “USING THE UNIT SAFELY” (p. 13) and “IMPORTANT NOTES”
(p. 14).
These sections provide important information concerning the proper operation of the unit. Additionally, in order to
English
feel assured that you have gained a good grasp of every feature provided by your new unit, this manual should be
read in its entirety. The manual should be saved and kept on hand as a convenient reference.
Deutsch
Making the Connections and
Main Features Turning the Power On .................................... 2
A large number of realistic preamp Let’s Play!......................................................... 3
modeling algorithms using COSM
The unit is equipped with a diverse array of
Using the Sound Library................................. 4
Français
COSM amplifiers (ten types), ranging from Saving Sounds (Memory Write) ..................... 4
clean sound to high-gain sound.
Thanks to the Sound Library, you Making Detailed Settings for Effects
can get just the right sound when (Edit Mode) ...................................................... 5
you need it Adjusting the Noise Suppressor...................................................5
You can obtain the ideal sound simply by Effect Guide ..................................................................................6
Italiano
selecting a category and a variation. COMP/FX (Compressor/Effects)....................................................6
Super Stack feature OD/DS (Overdrive/Distortion).......................................................6
You can get the powerful sound of a large PREAMP .................................................................................................6
stacked tube amp with just the simple press of MODULATION .....................................................................................7
a button. DELAY.....................................................................................................7
Phrase Loop feature REVERB...................................................................................................8
You can record and loop the playback of PEDAL FX (Pedal Effects) .................................................................8 Español
phrases up to 38 seconds long. Convenient Functions .................................... 9
Can be linked with a PC using USB Tuning the Guitar (Tuner)........................................................9
You can use digital audio workstations (DAW)
to accomplish digital recording and import Phrase Loop Play ..................................................................... 10
new sounds. Checking the Values of Controls........................................ 10
Português
Composite Object Sound Modeling—or “COSM” for Restoring the Factory Settings (Factory Reset)............. 12
short—is BOSS/Roland’s innovative and powerful
technology that’s used to digitally recreate the sound of Adjusting the Expression Pedal ......................................... 12
classic musical instruments and effects. COSM analyzes Signal Flow................................................................................. 12
the many factors that make up the original sound—
USING THE UNIT SAFELY....................................................... 13
including its electrical and physical characteristics—and
creates a digital model that accurately reproduces the IMPORTANT NOTES ................................................................ 14
original. Main Specifications................................................................. 14
Making the Connections and
Turning the Power On
Guitar a mp
tep
Ste 2 PSA-series AC adaptor
(sold separately)
Connect the equipment
tep
Ste 3 to the OUTPUT jack.
Connect a commercially
Insert the plug into the INPUT available anti-theft security
jack to power up the ME-25. cable here.
http://www.kensington.com/
Expected battery life under continuous use: Carbon: 3 hours, Alkaline: 9 hours
These figures will vary depending on the actual conditions of use.
When operating on battery power only, the unit's indicator will become dim when battery power gets too low.
Replace the battery as soon as possible.
We recommend that you keep batteries installed in the unit even when you're powering it with the AC adaptor.
That way, you’ll be able to continue a performance even if the cord of the AC adaptor gets accidently disconnected from the unit.
Once the connections have been completed, turn on power to your various devices in The ME-25 has no built-in amp or speakers. To hear sounds, you’ll need to provide a guitar
the order specified. By turning on devices in the wrong order, you risk causing amplifier, stereo headphones, or other such equipment.
malfunction and/or damage to speakers and other devices. For mono output, connect a cable to the L/MONO jack only.
To prevent malfunction and/or damage to speakers or other devices, always turn down If you want to send the output from the PHONES jack to a recorder or other device, use a
the volume, and turn off the power on all devices before making any connections. connection cable such as the PCS-31L (available separately). The PCS-31L has a stereo phone
Raise the amp volume only after turning on the power to all connected devices. plug on one end, and two phone plugs on the other end. If, instead, you were to use an ordinary
This unit is equipped with a protection circuit. A brief interval (a few seconds) after guitar cable, only the sound of the L channel would be available in the output.
power up is required before the unit will operate normally. On the ME-25, the level of the signal input via AUX cannot be adjusted. You’ll need to perform
When connection cables with resistors are used, the volume level of equipment that adjustment on the equipment you’ve connected. When needing to monitor the sound
connected to INPUT and AUX IN may be low. If this happens, use connection cables being input, first turn down the volume all the way on the device you’ve connected. Then,
that do not contain resistors. gradually raise the level until you’ve reached the appropriate volume.
2
Let’s Play!
Once you’ve finished making the connections, try playing sounds as you operate the ME-25.
English
tuner function.
Unlit: The pedal controls the volume.
What is a Memory? Lit: The pedal controls the pedal effects.
A group of effect settings is called a “memory.”
For detailed information about pedal effects, read “PEDAL FX (Pedal
The ME-25 has 60 memories. Effects)” (p. 8).
Deutsch
Display Using Super Stack
The currently This lets you get the powerful
selected sound
sound of a large, stack-type
(memory) and
tube amp even when you're
other information
appears here. playing with a small-size amp.
Pressing this button switches
Français
on Super Stack and makes the
SUPER STACK indicator light up.
Italiano
Switching to Solo Sounds Adjusting the Volume and Tone Quality
This switches to sounds suited to solo performance. DRIVE Knob
Pressing this pedal switches SOLO on and makes This adjusts the amount of distortion of preamp distortion.
the pedal’s indicator light up. TONE Knob
This adjusts the tone quality of the preamp. Español
Turn the VOLUME knob while SOLO is on to set the desired solo VOLUME Knob
volume. This adjusts the volume level of the preamp.
* Cannot be adjusted while in Edit mode (p. 5).
The knobs will be disabled when the preamp is off. To check the on/off
Phrase Loop Play status of the preamp, go to the Edit mode (p. 5).
Pressing this pedal for two seconds or longer enables
Português
the Phrase Loop feature. You can save the settings you've adjusted.
“Phrase Loop Play” (p. 10) “Saving Sounds (Memory Write)” (p. 4)
Should you encounter unexpected results, such as no sound being produced, check the following.
Nederlands
3
Using the Sound Library
For information on Sound Library sounds, read the separate “Sound Library List.”
Sounds cannot be added and saved in the Sound Library using the
ME-25 itself. Sounds that you like and want to reuse should be saved
in memory (Memory Write).
When saving the sounds in memory, placing them in the order that
you intend to use during the performance will be helpful.
Until you perform a Memory Write operation, switching off the power
2. Use the MEMORY pedals to choose the memory
or changing memories will cause any tones you’ve created to be lost. number where you’d like to save the memory.
Carrying out a Memory Write operation causes the sound already
saved at the destination memory to be lost.
Pressing and holding a pedal lets you switch memories successively.
4
Making Detailed Settings for Effects
(Edit Mode)
In Edit mode, you can make detailed settings for all the effects. 1. Hold down [EXIT] and press [WRITE].
“Ed” appears in the display and operation switches to Edit
2 mode.
English
To select PEDAL FX, firmly press down on the toe of the expression
pedal until the PEDAL FX indicator is lit.
For more information about each effect, read “Effect Guide” (p. 6).
The indicators show the states described below.
Each button press switches the state. 3. Choose the type of effect.
Deutsch
Example: COMP/FX
Effect off Effect on Effect adjustment
The number of types varies depending on the effect. For instance,
setting the COMP/FX type to 4 selects 3 (AC SIM) as the type.
4. Adjust the effect as desired.
Off Lit Flash
5. Press [EXIT].
This ends Edit mode.
Français
6. If you want to save the settings you’ve just
In the Edit mode, the function shown in italics is enabled.
made, carry out the Memory Write procedure
Example: the CLEAN button (p. 4).
Turning off the power or switching memories before you carry out a
Italiano
Memory Write operation causes the sound you've created to be lost.
This functions as a COMP/FX button.
1. Hold down [EXIT] and press [WRITE]. Turning off the power or switching memories before you carry out a
“Ed” appears in the display and operation switches to Edit Memory Write operation causes the sound you’ve created to be lost.
mode.
5
Making Detailed Settings for Effects (Edit Mode)
Effect Guide
All product names mentioned in this document are trademarks or registered trademarks of their respective owners.
Those companies are not affiliated with BOSS and have not licensed or authorized BOSS’s ME-25. Their marks are used solely to identify
the equipment whose sound is simulated by BOSS’s ME-25.
COMP/FX (Compressor/Effects)
This produces an effect that sustains the sound without distortion.
Explanation
1: COMP This produces an effect that sustains the SUSTAIN: ATTACK: LEVEL:
sound without distortion. This sets the sustain for the This sets the attack (onset) of This sets the volume level of
sound. the effect sound. the effect.
2: T.WAH This produces a wah effect matched to SENS: TONE: PEAK:
the intensity of your picking. This sets the sensitivity of This sets the tone (brightness) This sets the intensity of the
response to the input sound. of the wah. wah sound.
3: AC SIM This transforms the sound of your elec- LOW: HIGH: LEVEL:
tric guitar into an acoustic guitar sound. This adjusts the tone of the This adjusts the tone of the This sets the volume level of
low frequency range. high frequency range. the effect.
OD/DS (Overdrive/Distortion)
These effects add distinctive distortion or sustain.
Explanation
1: BOOST This is a gain booster. It works well for creating distortion DRIVE: TONE: LEVEL:
with a COSM preamp, or for creating punchy clean tones This sets the intensity of This sets the brightness This sets the volume
when used alone. the distortion. of the sound. level for OD/DS.
2: OD-1 This is the sound of the BOSS OD-1. It produces sweet,
mild distortion.
3: T-SCREAM This models an Ibanez TS-808.
4: BLUES This is a unique overdrive that faithfully reproduces the
nuances of picking.
5: DIST This is a sharp distortion with rich sustain.
6: CLASSIC This is the sound of a vintage stack-type amp.
7: MODERN This is the sound of a large high-gain amp.
8: METAL This is a distortion that emphasizes the midrange.
9: CORE This is a distortion that cuts the midrange.
10: FUZZ This is a distortion that is distinctively rough and heavy.
PREAMP
This models preamp response.
Explanation
1: CLEAN This is a clean sound that is smooth and warm. DRIVE: TONE: VOLUME:
2: TWIN This models a Fender Twin Reverb. This sets the amount of This sets adjusts the This sets adjusts the
distortion of the pre- tone quality of the pre- volume level of the pre-
3: TWEED This is a crunch sound of a Fender Bassman. amp. amp. amp.
4: VO DRIVE This is a crunch sound reminiscent of a VOX combo amp.
5: BG LEAD This is a lead sound of a Mesa/Boogie combo amp.
6: MS VINTAGE This is a sound reminiscent of 1970s Marshall amps. You can set the following parameters while the [DRIVE (PREAMP)]
7: MS MODERN This models the higher-gain sound of Marshall amps of indicator is flashing rapidly.
recent vintage. By holding the [DRIVE (PREAMP)] until “Ed” on the display starts
8: 5150 DRIVE This is a lead channel of a Peavey EVH5150. blinking, you can make the indicator on the [DRIVE (PREAMP)] flash
rapidly.
9: R-FIER This models a Mesa/Boogie Dual Rectifier.
When you press the [DRIVE (PREAMP)] again, the ME-25 returns to its
10: ULTRA METAL This is an original metal amp of exclusive design that pro- normal state.
duces sound having distinct contours along with bold bass
and heavy distortion.
This is ideal for all kinds of metal play, including complex BASS: MIDDLE: TREBLE:
and intense riffs, heavy and thundering downtuned bass
riffs, speedy solos, and more. This sets the tone This sets the tone This sets the tone
quality of the lowfre- quality of the middle- quality of the highfre-
quency range. frequency range. quency range.
6
Making Detailed Settings for Effects (Edit Mode)
MODULATION
These effects broaden, modulate, and/or pitch shift the sound.
Explanation
1: CHORUS This effect adds subtle wavering to RATE: DEPTH: E.LEVEL:
transform the tone into one that is This sets the speed of the effect This sets the richness of the effect This sets the volume
broader, thicker, and more beautiful. level of the effect.
2: PHASER This effect creates a sweeping, RATE: DEPTH: RESONANCE:
phase-shifted sound. This sets the speed of the effect This sets the richness of the effect This sets the intensity of
the effect.
3: FLANGER This creates a modulation effect like RATE: DEPTH: RESONANCE:
the rising and falling sound of a jet This sets the speed of the effect This sets the richness of the effect This sets the intensity of
engine. the effect.
4: ROTARY This effect produces the sound of RATE: DEPTH: E.LEVEL:
English
rotating speakers. This sets the speed of the effect This sets the richness of the effect This sets the volume
level of the effect.
5: UNI-V This models the Uni-Vibe, an effect RATE: DEPTH: E.LEVEL:
that’s part of the rock sound of the This sets the speed of the effect This sets the richness of the effect This sets the volume
1960s. level of the effect.
6: TREMOLO This produces a retro effect through RATE: DEPTH: E.LEVEL:
cyclical changes in the volume level. This sets the speed of the effect This sets the richness of the effect This sets the volume
Deutsch
level of the effect.
7: HARMONIST This creates harmonies reminiscent KEY: HARMONY: E.LEVEL:
of twin guitars. This sets the musical key of the This sets the pitch of the harmony. This sets the volume
* Play only single notes when using song being played. level of the effect.
the harmonist effect Ex.
Français
sound an octave lower. This sets the volume level of the This sets the volume
* Play only single notes when using direct sound. level of the effect
the octave effect.
DELAY
This delays the sound to produce an echo-like effect. It lets you add thickness and create complex sounds.
Explanation
Italiano
1: 1–99 ms This is a delay of 1 to 99 ms (milli- TIME: FEEDBACK: E.LEVEL:
seconds), which is ideal for a This sets the delay time in steps of 1 ms. This sets the number of This sets the volume level of
doubling effect. Ex. times the delay sound the delay sound.
2ms 99ms repeats.
4: TAP This allows you to use the SOLO TIME: FEEDBACK: E.LEVEL:
pedal to set the delay time (see This sets the beat for the delay sound. This sets the number of This sets the volume level of
below). Ex. times the delay sound the delay sound.
repeats.
When TAP is selected, you can set the delay’s tempo as dotted eighth notes Timing
or quarter notes by pressing the SOLO pedal two or more times in time with
the tempo of the song.
The SOLO pedal’s indicator flashes in time with the current tempo. Delay Sound
TIME setting
When TAP is selected as the delay type, the SOLO feature cannot be
switched on or off.
7
Making Detailed Settings for Effects (Edit Mode)
REVERB
This adds lingering reverberations to the sound.
Explanation
1: ROOM This simulates the reverberations inside a room. - - LEVEL:
2: HALL This simulates the reverberations inside a hall. This sets the volume
level of the effect.
For information on how to use pedal effects, read “Using Pedal Effects” (p. 3).
Explanation
1: WAH This is a wah effect. - - -
2: +1 OCTAVE This lets you continuously vary the pitch up to one octave
higher or lower than the original sound.
3: -1 OCTAVE * Play only single notes when using the octave effect.
4: FREEZE This lets you sustain sound by operating a pedal. You can
use this to hold a chord sound while playing a melody line.
Using FREEZE
1. Press the heel of the expression pedal.
2. Play the guitar, and while the sound is playing, press the toe of the expression pedal.
The sound is sustained for as long as you keep the pedal pressed.
* You can adjust the volume of the sustained sound by changing the pedal position.
3. Pressing the heel of the expression pedal stops the sustained sound.
8
Convenient Functions
English
Too low Tuned Too high
(rapid flashing) (rapid flashing)
Deutsch
The tuner is switched off.
Français
time.
The tuner is switched on.
2. If necessary, adjust the reference pitch.
You can change the reference pitch by holding down [EXIT]
and pressing the MEMORY / pedals.
Display Pitch
Italiano
35–45 435–445 [Hz]
9
Convenient Functions
3. Press [WRITE].
The setting is stored in memory.
10
Convenient Functions
English
included in the downloaded file.
Deutsch
Sending and receiving
Adjust the volume using audio signals
Français
the software
Use your computer’s software to adjust the level of the signal input via USB (it cannot be adjusted on the ME-25 itself).
To adjust the volume of a guitar, use the expression pedal or adjust other volume related parameters.
Italiano
To monitor the sound being input, first lower the volume all the way using your computer’s software. Then, gradually raise the level until you’ve
obtained the amount of volume you want.
When the ME-25 is connected to a computer, the built-in guitar amp simulator is switched on.
The signal that is input via AUX IN is not output using USB.
Español
Português
Nederlands
11
Appendices
1. Hold down [EXIT] and press the MEMORY When operating the expression pedal, be careful not to get your
fingers pinched between the movable part and the panel. In places
pedal. with small children, an adult should provide supervision and
“FA” appears in the display. guidance until the child is capable of following all the rules essential
2. Press [WRITE]. for the safe operation of the unit.
The Tuning Guide flashes. 1. Hold down [EXIT] and press the SOLO Pedal.
3. Press [WRITE] again. The display shows “Pd” then “Up.”
The display flashes and the factory reset is executed.
2. Move the heel of the expression pedal all the
way down, then release the pedal and press
Never turn off the power while factory reset is in progress. [WRITE].
The display shows “dn.”
3. Move the toe of the expression pedal all the way
down, then release the pedal and press [WRITE].
A value indicating the current stiffness (sensitivity) of the
expression pedal switch appears in the display.
If the display flashes in Steps 2 or 3, press the pedal again, and then
press [WRITE].
4. Use the MEMORY / pedals to adjust the
stiffness (sensitivity) of the expression pedal
toe switch.
The lower the value, the more easily the switch will respond,
even when pressed lightly.
Signal Flow
EFFECT
PEDAL FX COMP/FX OD/DS PREAMP USB USB AUX IN
INPUT OUT IN
USB PHONES
NOISE VOLUME
(PEDAL) MODULATION DELAY REVERB
SUPPRESSOR OUTPUT
* Essentially, effects are connected in the order illustrated above. However, this order may change automatically in order to optimize the connection order
and accommodate particular settings.
12
USING THE UNIT SAFELY
111: Selection
* Material damage refers to damage or the unit must never be disassembled. • Avoid using new batteries together
with used ones. In addition, avoid
other adverse effects caused with The symbol alerts the user to things that must be mixing different types of batteries.
respect to the home and all its carried out. The specific thing that must be done is 3
furnishings, as well to domestic animals indicated by the design contained within the circle. In the • Remove the batteries whenever the
or pets. case of the symbol at left, it means that the power-cord unit is to remain unused for an
plug must be unplugged from the outlet. extended period of time.
5
• If a battery has leaked, use a soft
piece of cloth or paper towel to wipe
English
all remnants of the discharge from
the battery compartment. Then
install new batteries. To avoid
002c 011 101b
• Do not open (or modify in any • Do not allow any objects (e.g., inflammation of the skin, make sure
• The unit and the AC adaptor that none of the battery discharge
way) the unit or its AC flammable material, coins, should be located so their
adaptor. pins); or liquids of any kind gets onto your hands or skin.
location or position does not Exercise the utmost caution so that
(water, soft drinks, etc.) to interfere with their proper
...................................................................................... none of the discharge gets near your
003 penetrate the unit. ventilation. eyes. Immediately rinse the affected
• Do not attempt to repair the ...................................................................................... area with running water if any of the
unit, or replace parts within it 102d
• Always grasp only the output discharge has entered the eyes.
(except when this manual ..................................................................................... 6
plug or the body of the AC
Deutsch
provides specific instructions 012c • Never keep batteries together with
directing you to do so). Refer all • Immediately turn the power adaptor when plugging into,
or unplugging from, this unit metallic objects such as ballpoint
servicing to your retailer, the nearest off, remove the AC adaptor pens, necklaces, hairpins, etc.
Roland Service Center, or an authorized from the outlet, and request or an outlet.
...................................................................................... ......................................................................................
Roland distributor, as listed on the servicing by your retailer, the 112
103b
“Information” page. nearest Roland Service Center, or an • At regular intervals, you • Used batteries must be
...................................................................................... authorized Roland distributor, as listed should unplug the AC disposed of in compliance
004 on the “Information” page when: adaptor and clean it by using with whatever regulations for
• Never install the unit in any of • The AC adaptor or the power-supply their safe disposal that may
the following locations. a dry cloth to wipe all dust
cord has been damaged; or and other accumulations away from its be observed in the region in which you
• Subject to temperature • If smoke or unusual odor occurs prongs. Also, disconnect the power live.
extremes (e.g., direct plug from the power outlet whenever ......................................................................................
• Objects have fallen into, or liquid
Français
sunlight in an enclosed the unit is to remain unused for an
118a
has been spilled onto the unit; or • Should you remove a USB
vehicle, near a heating extended period of time. Any accumu-
duct, on top of heat- • The unit has been exposed to rain connector cap, keep them in
(or otherwise has become wet); or lation of dust between the power plug a safe place out of children’s
generating equipment); and the power outlet can result in poor
or are • The unit does not appear to operate reach, so there is no chance
normally or exhibits a marked insulation and lead to fire. of them being swallowed accidentally.
• Damp (e.g., baths, washrooms, on ......................................................................................
wet floors); or are change in performance. ......................................................................................
104
..................................................................................... • Try to prevent cords and
• Exposed to steam or smoke; or are 013
• Subject to salt exposure; or are • In households with small cables from becoming
children, an adult should entangled. Also, all cords and
• Humid; or are cables should be placed so
• Exposed to rain; or are provide supervision until the
child is capable of following they are out of the reach of children.
Italiano
• Dusty or sandy; or are all the rules essential for the safe ......................................................................................
• Subject to high levels of vibration 106
operation of the unit. • Never climb on top of, nor
and shakiness. .....................................................................................
...................................................................................... place heavy objects on the
014
007 • Protect the unit from strong unit.
• Make sure you always have impact. ......................................................................................
the unit placed so it is level (Do not drop it!) 107d
and sure to remain stable. • Never handle the AC adaptor
Never place it on stands that ..................................................................................... body, or its output plugs,
015
could wobble, or on inclined surfaces. with wet hands when
• Do not force the unit’s
...................................................................................... plugging into, or unplugging
008b power-supply cord to share
an outlet with an unrea- from, an outlet or this unit.
Español
• Use only the specified AC ......................................................................................
adaptor (PSA series), and sonable number of other 108b
make sure the line voltage at devices. Be especially careful when • Before moving the unit,
the installation matches the using extension cords—the total power disconnect the AC adaptor
input voltage specified on the AC used by all devices you have connected and all cords coming from
adaptor’s body. Other AC adaptors may to the extension cord’s outlet must external devices.
use a different polarity, or be designed never exceed the power rating (watts/ ......................................................................................
for a different voltage, so their use amperes) for the extension cord. 109b
could result in damage, malfunction, or Excessive loads can cause the insulation • Before cleaning the unit, turn
electric shock. on the cord to heat up and eventually off the power and unplug the
...................................................................................... melt through. AC adaptor from the outlet
..................................................................................... (p. 2).
Português
009
• Do not excessively twist or 016 ......................................................................................
bend the power cord, nor • Before using the unit in a 110b
place heavy objects on it. foreign country, consult with • Whenever you suspect the
Doing so can damage the your retailer, the nearest possibility of lightning in your
cord, producing severed elements and Roland Service Center, or an area, disconnect the AC
short circuits. Damaged cords are fire authorized Roland distributor, as listed adaptor from the outlet.
and shock hazards! on the “Information” page. ......................................................................................
...................................................................................... .....................................................................................
010 019
• This unit, either alone or in • Batteries must never be
combination with an recharged, heated, taken
amplifier and headphones or apart, or thrown into fire or
Nederlands
13
IMPORTANT NOTES
Power Supply: Use of 354a
• Do not expose the unit to direct Additional Precautions Copyright/Licence/
Batteries sunlight, place it near devices that
radiate heat, leave it inside an enclosed
551
• Please be aware that the contents of Trademarks
301
vehicle, or otherwise subject it to memory can be irretrievably lost as a 853
• Do not connect this unit to same result of a malfunction, or the improper • Do not use this unit for purposes that
temperature extremes. Excessive heat
electrical outlet that is being used by an operation of the unit. To protect could infringe on a copyright held by a
can deform or discolor the unit.
electrical appliance that is controlled by 355b yourself against the risk of loosing third party. We assume no responsibility
an inverter (such as a refrigerator, • When moved from one location to important data, we recommend that whatsoever with regard to any infringe-
washing machine, microwave oven, or another where the temperature and/or you periodically save a backup copy of ments of third-party copyrights arising
air conditioner), or that contains a humidity is very different, water important data you have stored in the through your use of this unit.
motor. Depending on the way in which droplets (condensation) may form unit’s memory on a computer.
the electrical appliance is used, power • MMP (Moore Microprocessor Portfolio)
inside the unit. Damage or malfunction 552
refers to a patent portfolio concerned
supply noise may cause this unit to may result if you attempt to use the unit • Unfortunately, it may be impossible to
malfunction or may produce audible restore the contents of data that was with microprocessor architecture,
in this condition. Therefore, before which was developed by Technology
noise. If it is not practical to use a using the unit, you must allow it to stored in the unit’s memory or
separate electrical outlet, connect a computer once it has been lost. BOSS/ Properties Limited (TPL). Roland has
stand for several hours, until the licensed this technology from the TPL
power supply noise filter between this condensation has completely evapo- Roland Corporation assumes no liability
unit and the electrical outlet. concerning such loss of data. Group.
rated.
302 360 553
• The AC adaptor will begin to generate • Use a reasonable amount of care when • Roland, BOSS, and COSM are either
• Depending on the material and temper- registered trademarks or trademarks of
heat after long hours of consecutive ature of the surface on which you place using the unit’s buttons, sliders, or other
use. This is normal, and is not a cause controls; and when using its jacks and Roland Corporation in the United States
the unit, its rubber feet may discolor or and/or other countries.
for concern. mar the surface. connectors. Rough handling can lead to
303a
You can place a piece of felt or cloth malfunctions. • All product names mentioned in this
• If you’ll be using the ME-25 for an 556
extended time, we recommend that under the rubber feet to prevent this • When connecting / disconnecting all document are trademarks or registered
you use an AC adaptor. If you prefer to from happening. If you do so, please cables, grasp the connector itself— trademarks of their respective owners.
use a battery, we recommend an make sure that the unit will not slip or never pull on the cable. This way you
alkaline battery. move accidentally. will avoid causing shorts, or damage to
304b the cable’s internal elements.
• Batteries should always be installed or Maintenance 558a Printing Conventions
replaced before connecting any other • To avoid disturbing your neighbors, try
devices. This way, you can prevent
401a
• For everyday cleaning wipe the unit to keep the unit’s volume at reasonable and icons in This Manual
malfunction and/or damage to speakers with a soft, dry cloth or one that has levels. You may prefer to use
or other devices. been slightly dampened with water. To headphones, so you do not need to be Text or numerals Indicate buttons.
306b
remove stubborn dirt, use a cloth concerned about those around you enclosed in square [WRITE] WRITE button
• Batteries are supplied with the unit. The impregnated with a mild, non-abrasive (especially when it is late at night).
life of these batteries may be limited, 559a brackets [ ]
detergent. Afterwards, be sure to wipe
however, since their primary purpose the unit thoroughly with a soft, dry • When you need to transport the unit,
was to enable testing. package it in the box (including Indicates informa-
cloth. tion that you should
307
402 padding) that it came in, if possible.
• Before connecting this unit to other Otherwise, you will need to use equiv- be aware of when
• Never use benzine, thinners, alcohol or
devices, turn off the power to all units. alent packaging materials. using the ME-25.
solvents of any kind, to avoid the possi-
This will help prevent malfunctions 562
bility of discoloration and/or defor- Indicates supple-
and/or damage to speakers or other • Some connection cables contain
mation. mentary informa-
devices. resistors. Do not use cables that incor-
porate resistors for connecting to this tion about an
Placement Repairs and Data unit. The use of such cables can cause operation.
351
452 the sound level to be extremely low, or
• Please be aware that all data contained impossible to hear. For information on Indicates informa-
• Using the unit near power amplifiers (or tion about a conve-
in the unit’s memory may be lost when cable specifications, contact the
other equipment containing large nient operation.
the unit is sent for repairs. Important manufacturer of the cable.
power transformers) may induce hum. data should always be backed up on a
To alleviate the problem, change the Indicates a reference
computer, or written down on paper
orientation of this unit; or move it page.
(when possible). During repairs, due
farther away from the source of inter- care is taken to avoid the loss of data. (p. **)
ference.
352a However, in certain cases (such as when
• This device may interfere with radio and circuitry related to memory itself is out
television reception. Do not use this of order), we regret that it may not be
device in the vicinity of such receivers. possible to restore the data, and Roland
352b assumes no liability concerning such
• Noise may be produced if wireless loss of data.
communications devices, such as cell
phones, are operated in the vicinity of
this unit. Such noise could occur when
receiving or initiating a call, or while
conversing. Should you experience
such problems, you should relocate
such wireless devices so they are at a
greater distance from this unit, or
switch them off.
Main Specifications
ME-25: Guitar Multiple Effects Output 2k ohms Weight 1.9 kg, 4 lbs 4 oz (including batteries)
AD 24-bit + AF method Impedance Accessories Owner’s Manual
Conversion * AF method (Adaptive Focus method) Display 7 segments, 2 digits LED Sound Library/Memory List (Leaflet)
This is a proprietary method from Sound Library Sticker
Roland & BOSS that vastly improves Power Supply DC 9 V Dry Batteries (Alkaline: LR6 (AA) type) x 6
the signal-to-noise (S/N) ratio of the Dry Batteries (R6/LR6(AA) type) x 6 Roland Service (Information Sheet)
A/D and D/A converters. AC Adaptor (BOSS PSA series: sold sepa- Options AC Adaptor: BOSS PSA series
DA 24-bit rately)
* 0 dBu = 0.775 Vrms
Conversion Current Draw 150 mA * In the interest of product improvement, the specifica-
Sampling 44.1 kHz Expected bat- Alkaline: 9 hours tions and/or appearance of this unit are subject to
Frequency tery life under Carbon: 3 hours change without prior notice.
continuous (These figures will vary depending on
Memory 60 the actual conditions of use.)
use
Nominal INPUT: -10 dBu
Input Level Dimensions 300 (W) x 191 (D) x 72 (H) mm
AUX IN: -18 dBu 11-13/16 (W) x 7-9/16 (D) x 2-7/8 (H)
Input INPUT: 1M ohm inches
Impedance AUX IN: 22k ohms Maximum height:
300 (W) x 191 (D) x 93 (H) mm
Nominal -10 dBu 11-13/16 (W) x 7-9/16 (D) x 3-11/16 (H)
Output Level inches
14
ME-25_g.book 1 ページ 2014年9月24日 水曜日 午後12時55分
Bedienungsanleitung
Vor dem Betrieb des Geräts lesen Sie bitte die folgend aufgeführten Abschnitte sorgfältig durch: „SICHERER BETRIEB
DES GERÄTS“ (S. 13) und „WICHTIGE HINWEISE“ (S. 14).
Diese Abschnitte enthalten wichtige Informationen über die korrekte Bedienung des Geräts. Um einen vollständigen
English
Überblick über alle Funktionen des Gerätes zu erhalten, sollten Sie diese Bedienungsanleitung vollständig
durchlesen. Bewahren Sie die Anleitung an einem sicheren Platz auf und verwenden Sie diese zu Referenzzwecken.
Deutsch
Anschließen und Einschalten des Geräts...... 2
Wichtigste Funktionen Machen wir Musik! .......................................... 3
Alle wichtigen Gitarrenverstärker als
Verwenden der Sound Library....................... 4
COSM-Modeling enthalten
Das Gerät ist mit einer breiten Auswahl an COSM- Speichern von Klängen
Français
Verstärkern (zehn Typen) ausgestattet, die das (Speicher-Schreibvorgang)............................ 4
gesamte Spektrum von Cleansounds bis hin zu
High-Gain-Sounds abdecken. Detaillierte Einstellungen für Effekte
Mit der Sound Library erhalten Sie (Edit-Modus).................................................... 5
stets den passenden Sound Anpassen des Rauschfilters............................................................5
Sie können ganz einfach den passenden Klang Effekt-Leitfaden...........................................................................6
Italiano
einstellen, indem Sie eine Kategorie und eine COMP/FX (Kompressor/Effekte) ...................................................6
Variation auswählen. OD/DS (Overdrive/Distortion).......................................................6
Super Stack PREAMP .................................................................................................6
Mit einem einfachen Tastendruck können Sie den MODULATION .....................................................................................7
vollen Sound eines großen Röhrenverstärkers DELAY.....................................................................................................7
imitieren. REVERB...................................................................................................8
Phrase Loop PEDAL FX (Pedaleffekte)..................................................................8 Español
Sie können bis zu 38 Sekunden aufzeichnen und
die Aufnahme endlos im Kreis abspielen, um Praktische Funktionen ................................... 9
dazu zu jammen. Stimmen der Gitarre (Stimmgerät) ......................................9
Kann über USB mit einem PC Phrase-Loop-Wiedergabe .................................................... 10
verbunden werden Überprüfen der Werte der Regler...................................... 10
Sie können eine DAW-Software einsetzen, um
Português
Composite Object Sound Modeling (bzw. „COSM“) ist die Wiederherstellen der Werkseinstellungen
innovative und leistungsstarke Technologie von BOSS/ (Factory Reset).......................................................................... 12
Roland, mit deren Hilfe der Klang von klassischen Anpassen des Expression-Pedals....................................... 12
Musikinstrumenten und Effekten digital reproduziert wird.
COSM analysiert die Vielzahl der Faktoren – einschließlich der Signalfluss .................................................................................. 12
elektrischen und physikalischen Merkmale –, die den SICHERER BETRIEB DES GERÄTS ......................................... 13
Original-Sound ausmachen, und erzeugt ein digitales Modell,
WICHTIGE HINWEISE .............................................................. 14
das eine genaue Reproduktion des Originals darstellt.
Technische Daten.................................................................... 14
ME-25_g.book 2 ページ 2014年9月24日 水曜日 午後12時55分
4
Schritt Schalten Sie den Verstärker 1 HINWEIS
Schritt Vergewissern Sie sich, dass Sie ein
erst am Schluss ein!
E-Gitarre Regeln Sie beim PC Netzteil der PSA-Serie von BOSS
Anschließen die verwenden. Die Verwendung
Lautstärke an sämtlichen eines anderen Netzteils kann zu
Geräten vollständig Beschädigungen oder Fehlfunkti-
herunter! onen führen.
Gitarrenverstärker
Schritt
2
Schließen Sie den
Netzteil der PSA-Serie
3
Verstärker an der
OUTPUT-Buchse an. (separat erhältlich)
Schritt Schließen Sie hier auf Wunsch
Stecken Sie zum Einschalten des ME-25 ein im Handel erhältliches
den Stecker in die INPUT-Buchse. Diebstahlsicherungskabel an.
http://www.kensington.com/
2
ME-25_g.book 3 ページ 2014年9月24日 水曜日 午後12時55分
English
Leuchtet nicht:
Was ist ein Speicherplatz? Das Pedal regelt die Lautstärke.
Leuchtet:
Eine Gruppe Effekteinstellungen wird als Das Pedal regelt die Pedaleffekte.
„Speicherplatz“ bezeichnet. Das ME-25
Siehe Nähere Informationen zu den Pedaleffekten finden Sie unter
verfügt über 60 Speicherplätze. „PEDAL FX (Pedaleffekte)“ auf S. 8.
Deutsch
Display Verwenden von Super Stack
Hier werden der Hiermit können Sie den vollen
aktuell
Sound eines großen
ausgewählte
Röhrenverstärkers imitieren,
Klang
(Speicherplatz) auch wenn Sie lediglich einen
und andere kleinen Verstärker verwenden.
Français
Informationen Durch Drücken dieser Taste
angezeigt. aktivieren Sie Super Stack; die
Anzeige SUPER STACK leuchtet
auf.
Italiano
Umschalten auf Solo-Sounds Einstellen des Zerrsounds
Hierdurch wird ein Sound eingestellt, der zu Soli passt. DRIVE-Regler
Durch Drücken dieses Pedals wird SOLO aktiviert; Hiermit wird der Grad der Verzerrung eingestellt.
die Anzeige des Pedals leuchtet auf. Regler TONE
Hiermit wird der Ton (hell/dunkel) eingestellt.
MERKE Español
Drehen Sie den VOLUME-Regler, während SOLO aktiviert ist, Pegelregler VOLUME
um die gewünschte, höhere Lautstärke für Ihr Solo einzustellen. Hiermit wird die Lautstärke eingestellt.
* Kann im Edit-Modus nicht angepasst werden (S. 5). MERKE
Bei ausgeschaltetem Vorverstärker sind die Regler deaktiviert. Den
Phrase-Loop-Wiedergabe Status des Vorverstärkers können Sie im Edit-Modus überprüfen (S. 5).
Wenn Sie dieses Pedal für zwei Sekunden oder länger TIPP
Português
gedrückt halten, aktivieren Sie die Phrase-Loop-Funktion. Sie können Ihre Einstellungen speichern.
Siehe „Phrase-Loop-Wiedergabe” (S. 10) Siehe „Speichern von Klängen (Speicher-Schreibvorgang)“ (S. 4)
TIPP
Falls unerwartete Ergebnisse auftreten sollten, wenn etwa kein Klang erzeugt wird, müssen Sie Folgendes überprüfen.
Nederlands
3
ME-25_g.book 4 ページ 2014年9月24日 水曜日 午後12時55分
Siehe
Nähere Informationen zur Sound Library finden Sie in der Sound Library-Liste.
MERKE
Klänge können in der Sound Library nicht direkt über das ME-25
hinzugefügt oder gespeichert werden. Klänge, die Sie
wiederverwenden möchten, sollten im Speicher gesichert werden
(Speicher-Schreibvorgang).
TIPP
Wenn Sie die Klänge im Speicher sichern, ordnen Sie sie am besten
so, wie Sie sie während des Spiels benötigen.
MERKE
1,3 Zum Abbrechen des Speicher-Schreibvorgangs drücken Sie [EXIT].
3. Drücken Sie erneut [WRITE].
Die Speichernummer blinkt schneller und zeigt damit an, dass
der Klang gesichert wurde.
2 TIPP
Um Speicherinhalt zu kopieren, rufen Sie den gewünschten
Speicherplatz auf, und führen Sie anschließend einfach einen
Speicher-Schreibvorgang durch. Sie können den Speicherplatz
kopieren, indem Sie eine andere Speichernummer auswählen und
den Speicherinhalt unter dieser Nummer ablegen.
4
ME-25_g.book 5 ページ 2014年9月24日 水曜日 午後12時55分
Im Edit-Modus können Sie detaillierte Einstellungen für alle Effekte 1. Halten Sie [EXIT] gedrückt, und drücken Sie
vornehmen.
[WRITE].
2 Das Gerät schaltet in den Edit-Modus, und in der Anzeige wird
„Ed“ eingeblendet.
1 5 3 4 2. Wählen Sie den Effekt aus, dessen
Einstellungen Sie festlegen möchten.
Die Anzeige für den ausgewählten Effekt blinkt.
TIPP
English
Um PEDAL FX auszuwählen, drücken Sie die vordere Seite des
Expression-Pedals ganz herunter, bis die Anzeige PEDAL FX aufleuchtet.
Siehe
Nähere Informationen zu den einzelnen Effekten finden Sie unter
Die Anzeigen zeigen die nachstehend beschriebenen Zustände. „Effekt-Leitfaden“ (S. 6).
Mit jedem Tastendruck wird der aktuelle Zustand gewechselt.
3. Wählen Sie den gewünschten Effekttyp aus.
Deutsch
Beispiel: COMP/FX
Effekt aus Effekt ein Effektanpassung MERKE
Die Anzahl der verfügbaren Typen hängt vom jeweiligen Effekt ab.
Wenn Sie beispielsweise den Typ COMP/FX auf „4“ einstellen, wird
„3“ (AC SIM) als Typ ausgewählt, siehe „Effekt-Leitfaden“ (S. 6).
Aus Leuchtet Blinkt
4. Passen Sie den Effekt wie gewünscht an.
5. Drücken Sie die [EXIT]-Taste.
Français
MERKE Hiermit wird der Edit-Modus beendet.
Die kursiv angezeigte Funktion ist im Edit-Modus aktiv.
6. Wenn Sie Ihre Einstellungen speichern
Beispiel: die Taste CLEAN
möchten, führen Sie einen Speicher-
Schreibvorgang durch (S. 4).
HINWEIS
Italiano
Solange Sie keinen Speicher-Schreibvorgang durchgeführt haben,
Fungiert als COMP/FX-Taste. gehen durch das Ausschalten des Geräts oder das Wechseln des
Speichers sämtliche Sounds verloren, die Sie erzeugt haben.
3 MERKE
Português
5
ME-25_g.book 6 ページ 2014年9月24日 水曜日 午後12時55分
Effekt-Leitfaden
Alle in dieser Bedienungsanleitung erwähnten Produktnamen sind Warenzeichen bzw. eingetragene Warenzeichen der jeweiligen Besitzer.
Die jeweiligen Unternehmen sind keine Partner von BOSS und besitzen keine Lizenz oder Autorisierung für das ME-25 von BOSS. Ihre
Warenzeichen werden ausschließlich dafür verwendet, die Sounds, die durch das ME-25 von BOSS simuliert werden, möglichst genau
zu beschreiben.
COMP/FX (Kompressor/Effekte)
In dieser Kategorie finden Sie drei unterschiedliche Arten von Effekten.
Erläuterung
1: COMP Hiermit wird ein Effekt erzeugt, der SUSTAIN: ATTACK: LEVEL:
Cleansounds fetter macht und län- Hiermit wird das Sustain (“Ton- Hiermit wird das Attack (Anschlaglaut- Hiermit wird der Lautstärkepe-
ger klingen lässt. länge”) für den Sound eingestellt. stärke) für den Effektklang eingestellt. gel des Effekts eingestellt.
2: T.WAH Hiermit wird ein Wah-Effekt SENS: TONE: PEAK:
erzeugt, der mit der Anschlagsstär- Hiermit wird die Anschlags- Hiermit wird der Klang (Klanghellig- Hiermit wird die Intensität des
ke gesteuert wird. Empfindlichkeit eingestellt. keit) des Wah-Sounds eingestellt. Wah-Sounds eingestellt.
3: AC SIM Hiermit wird der Klang Ihrer E- LOW: HIGH: LEVEL:
Gitarre in den Klang einer akusti- Hiermit wird die Stärke der Hiermit wird die Stärke der Höhen Hiermit wird die Lautstärke
schen Gitarre umgewandelt. Bässe eingestellt. eingestellt. des Akustikklangs eingestellt.
OD/DS (Overdrive/Distortion)
Mit diesen Effekten wird eine charakteristische Verzerrung erzeugt.
Erläuterung
1: BOOST Der Gain Booster. Er erhöht die Lautstärke auf Solo-Niveau. Ein DRIVE: TONE: LEVEL:
COSM-PREAMP wird dadurch noch stärker übersteuert (mehr Hiermit wird die Inten- Hiermit wird die Hel- Hiermit wird die Laut-
Verzerrung möglich). sität der Verzerrung ligkeit des Klangs ein- stärke der Verzerrung
2: OD-1 Dies ist der Sound des BOSS OD-1. Hiermit wird eine sanfte, eingestellt. gestellt. eingestellt.
bluesige Verzerrung erzeugt.
3: T-SCREAM Hiermit wird ein Ibanez TS-808 simuliert.
4: BLUES Diese einzigartige Übersteuerung gibt Nuancen von Anschlä-
gen getreu wieder.
5: DIST Dies ist eine starke Verzerrung mit vollem Sustain.
6: CLASSIC Dies ist der typische Rock-Sound.
7: MODERN Dies ist der typische Sound für modernen Rock/Hardrock.
8: METAL Perfekter Verzerrer für Hardrock/Metal.
9: CORE Perfekter Verzerrer für Metal Core/Trash Metal.
10: FUZZ Typischer 60er Jahre Fuzz-Zerrsound.
PREAMP
Hier werden berühmte und legendäre Gitarrenverstärker simuliert.
Erläuterung
1: CLEAN Dieser cleane Sound ist sanft und warm. DRIVE: TONE: VOLUME:
2: TWIN Hiermit wird ein Fender Twin Reverb simuliert. Hiermit wird der Grad Hiermit wird die Hel- Hiermit wird die Laut-
der Verzerrung des ligkeit des Klangs ein- stärke des simulierten
3: TWEED Dieser Crunch-Sound entspricht dem eines Fender-Bassman- Verstärkers eingestellt. gestellt. Verstärkers eingestellt.
Verstärkers.
4: VO DRIVE Dieser Crunch-Sound ist ein VOX AC-30 Combo-Verstärker. MERKE
5: BG LEAD Dieser Lead-Sound entspricht dem eines Mesa/Boogie Mark IV
Sie können folgende Parameter einstellen, während die [DRIVE
Combo-Verstärkers.
(PREAMP)]-Anzeige schnell blinkt.
6: MS VINTAGE Dies ist ein Marshall Plexi. Wenn Sie den [DRIVE (PREAMP)]-Taster gedrückt halten, bis “Ed” im
7: MS MODERN Hiermit wird der typische High-Gain-Sound eines modernen Display blinkt, können Sie die [DRIVE (PREAMP)]-Anzeige zum
Marshall-Verstärkers simuliert. schnellen Blinken bringen.
8: 5150 DRIVE Hiermit wird der Lead-Kanal eines Peavey EVH5150 simuliert. Wenn Sie den [DRIVE (PREAMP)]-Taster noch einmal drücken, kehrt
der ME-25 in den normalen Betriebszustand zurück.
9: R-FIER Dies entspricht einem Mesa/Boogie Dual Rectifier.
10: ULTRA METAL Hiermit wird ein exklusiver Metal-Verstärker simuliert, der für
einen Sound mit klaren Konturen, sattem Bass und starker Ver- BASS: MIDDLE: TREBLE:
zerrung sorgt. Hier werden die Bässe Hier werden die Mit- Hier werden die
Diese Einstellung eignet sich für alle Arten von Metal-Songs, des simulierten Ver- ten des simulierten Höhen des simulierten
einschließlich komplexer, intensiver Riffs, schwerer, tiefer stärkers eingestellt. Verstärkers eingestellt. Verstärkers eingestellt.
gestimmter Bass-Riffs, schneller Soli und mehr.
6
ME-25_g.book 7 ページ 2014年9月24日 水曜日 午後12時55分
MODULATION
Mit diesen Effekten wird der Klang verbreitert, moduliert und/oder einer Tonhöhenverschiebung unterzogen.
Erläuterung
1: CHORUS Dieser Effekt fügt dem Sound eine RATE: DEPTH: E.LEVEL:
Schwebung hinzu, so dass er brei- Hiermit wird die Geschwindigkeit Hiermit wird der Effektanteil einge- Hiermit wird der Lautstärke-
ter und voller wird und schöner des Effekts eingestellt. stellt. pegel des Effekts eingestellt.
klingt.
2: PHASER Dieser Effekt erzeugt einen phasen- RATE: DEPTH: RESONANCE:
verschobenen Klang. Hiermit wird die Geschwindigkeit Hiermit wird der Effektanteil einge- Hiermit wird die Intensität
des Effekts eingestellt. stellt. des Effekts eingestellt.
3: FLANGER Hiermit wird ein Modulationseffekt RATE: DEPTH: RESONANCE:
erzeugt, der dem ansteigenden Hiermit wird die Geschwindigkeit Hiermit wird der Effektanteil einge- Hiermit wird die Intensität
und abfallenden Klang eines des Effekts eingestellt. stellt. des Effekts eingestellt.
English
Düsenflugzeugs ähnelt.
4: ROTARY Dieser Effekt erzeugt den Klang von RATE: DEPTH: E.LEVEL:
rotierenden Lautsprechern (Leslie). Hiermit wird die Geschwindigkeit Hiermit wird der Effektanteil einge- Hiermit wird der Lautstärke-
des Effekts eingestellt. stellt. pegel des Effekts eingestellt.
5: UNI-V Hiermit wird der Klang des Uni-Vibe RATE: DEPTH: E.LEVEL:
nachgebildet. Dieser Effekt ist Teil Hiermit wird die Geschwindigkeit Hiermit wird der Effektanteil einge- Hiermit wird der Lautstärke-
des Rock-Sounds der 1960er. des Effekts eingestellt. stellt. pegel des Effekts eingestellt.
6: TREMOLO Hierbei wird über zyklische Ände- RATE: DEPTH: E.LEVEL:
Deutsch
rungen des Lautstärkepegels ein Hiermit wird die Geschwindigkeit Hiermit wird der Effektanteil einge- Hiermit wird der Lautstärke-
Retro-Effekt erzeugt. des Effekts eingestellt. stellt. pegel des Effekts eingestellt.
7: HARMONIST Hiermit werden aus Einzeltönen KEY: HARMONY: E.LEVEL:
zweistimmige Sounds generiert. Hiermit wird die Tonart des Songs Hiermit wird das Intervall (z.B. Terz = Hiermit wird der Lautstärke-
* Spielen Sie nur einzelne Noten, eingestellt. 3) des Zusatztons eingestellt. pegel des Effekts einge-
wenn Sie den Harmonist-Effekt Beispiel: stellt.
verwenden.
Français
8: OCTAVE Durch einen Zusatzton, der eine - D.LEVEL: E.LEVEL:
Oktave niedriger ist, wird Klangfülle Hiermit wird der Lautstärkepegel Hiermit wird der Lautstärke-
verliehen. des direkten Tonsignals eingestellt. pegel des Oktavtons einge-
* Spielen Sie nur einzelne Noten, wenn stellt.
Sie den Octave-Effekt verwenden.
DELAY
Mit dieser Funktion wird ein Echo zugefügt. Sie können dadurch die Klangfülle erweitern und komplexe Klänge erzeugen.
Italiano
Erläuterung
1: 1-99 ms Dieses Delay von 1 bis 99 TIME: FEEDBACK: E.LEVEL:
ms (Millisekunden) ist Hiermit wird die Delay-Zeit in Schritten von 1 ms eingestellt. Hiermit wird die Hiermit wird der Laut-
ideal für einen Doubling- Beispiel: Anzahl der Wiederho- stärkepegel des Delay-
Effekt. 2ms 99ms lungen für das Echo Klangs eingestellt.
eingestellt.
2: 100-990 ms Dieses Delay weist eine TIME: FEEDBACK: E.LEVEL:
Delay-Zeit von 100 bis Hiermit wird die Delay-Zeit in Schritten von 10 ms eingestellt. Hiermit wird die Hiermit wird der Laut- Español
990 ms (Millisekunden) Beispiel: Anzahl der Wiederho- stärkepegel des Delay-
auf (normaler Echo- 120ms 990ms lungen für das Echo Klangs eingestellt.
Bereich). eingestellt.
3: 1000-6000 ms Dieses Delay von 1000 bis TIME: FEEDBACK: E.LEVEL:
6000 ms (Millisekunden) Hiermit wird die Delay-Zeit in Schritten von 100 ms eingestellt. Hiermit wird die Hiermit wird der Laut-
ist für spezielle Effekte Beispiel: Anzahl der Wiederho- stärkepegel des Delay-
geeignet. 1200ms 6000ms lungen für das Echo Klangs eingestellt.
eingestellt.
Português
Wenn TAP ausgewählt ist, können Sie das Delay-Tempo als punktierte Achtel- oder Timing
Viertelnoten festlegen, indem Sie das SOLO-Pedal zweimal oder öfter im Takt des
Songs drücken.
Delay-Klang
Die Anzeige des SOLO-Pedals blinkt im Takt mit dem aktuell eingestellten Tempo.
MERKE TIME-
Einstellung
Wenn TAP als Delay-Typ ausgewählt ist, kann die SOLO-Funktion nicht ein-
oder ausgeschaltet werden.
7
ME-25_g.book 8 ページ 2014年9月24日 水曜日 午後12時55分
REVERB
Mit dieser Funktion erhält der Sound einen Nachhall.
Erläuterung
1: ROOM Hiermit wird der Nachhall in einem kleinen Raum simu- - - LEVEL:
liert. Hiermit wird der Laut-
2: HALL Hiermit wird der Nachhall in einer Halle simuliert. stärkepegel des Effekts
eingestellt.
PEDAL FX (Pedaleffekte)
Hiermit kann eine Vielzahl von Effekten mit dem Expression-Pedal des ME-25 erzeugt werden.
Siehe
Nähere Informationen zur Verwendung der Pedaleffekte finden Sie unter „Verwenden von Pedaleffekten“ (S. 3).
Erläuterung
1: WAH Dies ist der Wah-Effekt. - - -
2: +1 OCTAVE Hiermit können Sie die Tonhöhe stufenlos um bis zu eine
Oktave höher oder niedriger als den Originalklang variie-
3: -1 OCTAVE ren.
* Spielen Sie nur einzelne Noten, wenn Sie den Octave-
Effekt verwenden.
4: FREEZE Bei Benutzung des Pedals wird der Klang z.B. eines
Akkords “eingeforen”, so dass er weiterklingt und darüber
ein Solo gespielt werden kann.
8
ME-25_g.book 9 ページ 2014年9月24日 水曜日 午後12時55分
Praktische Funktionen
English
Zu niedrig Richtig Zu hoch
(schnelles Blinken) gestimmt (schnelles Blinken)
Deutsch
/ .
Das Stimmgerät wird ausgeschaltet.
Français
/ . Sie können die Lautstärke mit dem Expression-Pedal regeln,
Das Stimmgerät wird eingeschaltet. z.B. auf null, um stumm zu stimmen.
Italiano
drücken.
Display Tonhöhe
35 bis 45 435 bis 445 [Hz]
MERKE
Die Referenztonhöheneinstellung wird automatisch gespeichert.
Daher brauchen Sie diese Einstellung nicht bei jeder Feinabstimmung
vorzunehmen. Español
Die Referenztonhöhe ist auf 40 (440 Hz) eingestellt, wenn das Gerät
vom Werk ausgeliefert wird.
9
ME-25_g.book 10 ページ 2014年9月24日 水曜日 午後12時55分
Praktische Funktionen
Phrase-Loop-Wiedergabe
Sie können bis zu 38 Sekunden Ihres Spiels aufnehmen und diesen 1. Halten Sie das SOLO-Pedal mindestens zwei
Mitschnitt immer wieder im Kreis abspielen lassen. Außerdem Sekunden lang gedrückt (STANDBY).
können Sie der abgespielten Aufnahme weitere musikalische Das Gerät schaltet in die Aufnahmebereitschaft, und die
Elemente hinzufügen (Overdubs). Anzeige des SOLO-Pedals blinkt in festgelegten Intervallen.
Dadurch können Sie im Handumdrehen ein Playback in Echtzeit
erzeugen.
2. Drücken Sie das SOLO-Pedal (REC).
Die Aufnahme beginnt, sobald Sie das SOLO-Pedal drücken.
Die Anzeige des SOLO-Pedals blinkt schnell.
1. Gedrückt 2.
3. Drücken Sie das SOLO-Pedal erneut (PLAY).
halten > 2 Sek Die Aufnahme wird beendet. Sobald die Aufnahme beendet
STANDBY REC
ist, startet die Wiedergabe des aufgenommenen Abschnitts.
Die Anzeige des SOLO-Pedals leuchtet stetig.
MERKE
5. 5. 3. Bei extrem kurzen Aufnahmezeiten ist eventuell ein vibrierender
Klang zu hören.
4. Zum Überlagern von zusätzlichen Aufnahmen
4.
müssen Sie die Schritte 2 und 3 wiederholen
(OVERDUB).
OVERDUB PLAY
TIPP
SOLO-
Sie können auch während der Phrase-Loop-Wiedergabe durch die
Pedalanzeige
4. verschiedenen Speicherplätze wechseln und verschiedene Sounds
Leuchtet per Overdubs aufnehmen.
Aus 5. Um die Loop-Wiedergabe zu stoppen, drücken
Sie zweimal in kurzem Abstand das SOLO-Pedal
(STANDBY).
Die Loop-Wiedergabe/Aufnahme wird beendet, und Phrase
Loop schaltet in die Aufnahmebereitschaft zurück.
MERKE
Drücken Sie das Pedal innerhalb einer Sekunde zweimal.
Wenn die Wiedergabe beendet wird, werden die aufgenommenen
Daten gelöscht.
10
ME-25_g.book 11 ページ 2014年9月24日 水曜日 午後12時55分
Praktische Funktionen
English
Der Installationsvorgang ist je nach Betriebsystem des Rechners eventuell unterschiedlich. Lesen Sie dazu die „Readme“-Datei, die mit dem
Treiber herunter geladen wird.
Deutsch
Senden und
Empfangen von
Anpassen der Lautstärke Audiosignalen
Français
über die Software
HINWEIS
Passen Sie den Pegel des Eingangssignals über USB mithilfe der Computersoftware an (er kann nicht direkt über das ME-25 angepasst werden).
Italiano
Zum Anpassen der Lautstärke der Gitarre verwenden Sie das Expression-Pedal oder sonstige Lautstärkeregelungs-Parameter.
Um die Eingangssignale zu überprüfen, regeln Sie zuerst über die Computersoftware die Lautstärke vollständig herunter. Erhöhen Sie anschließend die
Lautstärke nach und nach, bis Sie die gewünschte Lautstärke erreicht haben.
MERKE
Wenn das ME-25 mit einem Computer verbunden wird, wird der integrierte Gitarren-Lautsprechersimulator eingeschaltet.
Das über AUX IN eingegangene Signal wird nicht über USB ausgegeben.
Español
Português
Nederlands
11
ME-25_g.book 12 ページ 2014年9月24日 水曜日 午後12時55分
Anhänge
Signalfluss
EFFECT
PEDAL FX COMP/FX OD/DS PREAMP USB USB AUX IN
INPUT OUT IN
USB PHONES
NOISE VOLUME
(PEDAL) MODULATION DELAY REVERB
SUPPRESSOR OUTPUT
* Im Wesentlichen sind die Effekte in der oben dargestellten Reihenfolge miteinander verbunden. Diese Reihenfolge kann sich jedoch automatisch ändern,
um die Verbindungsreihenfolge zu optimieren und bestimmte Einstellungen anzuwenden.
12
ME-25_g.book 13 ページ 2014年9月24日 水曜日 午後12時55分
English
Gerät heraus, wenn dieses längere
Zeit nicht benutzt wird.
002c
011 101b 5
• Öffnen Sie weder das Gerät • Achten Sie darauf, dass keine • Das Gerät und das Netzteil
noch das Netzteil, und verän- • Wenn eine Batterie ausgelaufen sein
Gegenstände (z. B. leicht sollten so aufgestellt werden, sollte, entfernen Sie mit einem
dern Sie diese Elemente in entzündliches Material, dass deren Position nicht die
keiner Weise. weichen Tuch oder einem Papierta-
Münzen, Nadeln) oder erforderliche Luftzufuhr schentuch jegliche Rückstände aus
......................................................................................
003 Flüssigkeiten jeglicher Art beeinträchtigt.
• Versuchen Sie nicht, das Gerät dem Batteriefach. Setzen Sie dann
(Wasser, Getränke usw.) in das ...................................................................................... neue Batterien ein. Um Hautentzün-
zu reparieren oder darin Gerät gelangen. 102d
enthaltene Teile zu ersetzen • Fassen Sie stets am Stecker dungen zu vermeiden, achten Sie
..................................................................................... oder am Endstück des Netzteils darauf, dass keine Batterieflüssig-
(außer in Fällen, für die in 012c
• Schalten Sie das Gerät sofort keit auf Ihre Hände oder Ihre Haut
Deutsch
dieser Anleitung genaue Anweisungen an, wenn Sie dieses in das
gegeben sein sollten). Wenden Sie sich aus, ziehen Sie das Netzteil aus Gerät oder in eine Steckdose gelangt. Achten Sie äußerst genau
bezüglich jeglicher Reparaturen an Ihren der Steckdose, und wenden stecken bzw. aus diesen herausziehen. darauf, dass die Batteriesäure nicht
Fachhändler, ein Roland-Service-Center in Sie sich an Ihren Fachhändler, ...................................................................................... in die Nähe Ihrer Augen gelangt.
Ihrer Nähe oder an einen der autorisierten ein Roland-Service-Center in Ihrer Nähe 103b Sollte dieses dennoch passieren,
Roland-Vertriebspartner, die auf der Seite oder an einen der autorisierten Roland- • Sie sollten in regelmäßigen spülen Sie den betroffenen Bereich
„Information“ aufgelistet sind. Vertriebspartner, die auf der Seite „Infor- Abständen das Netzteil aus der sofort unter fließendem Wasser aus,
...................................................................................... mation“ aufgelistet sind, wenn: Steckdose herausziehen und und benachrichtigen Sie einen Arzt.
004 6
• Das Netzteil oder das Netzkabel die Kontakte am Stecker mit
• Installieren Sie das Gerät einem trockenen Tuch von Staub und • Bewahren Sie Batterien nicht
niemals in einer Umgebung beschädigt wurde;
• Rauch oder ein ungewöhnlicher anderen Ablagerungen befreien. Ziehen zusammen mit metallenen Gegen-
mit folgenden Bedingungen: Sie den Netzstecker auch dann aus der ständen wie Kugelschreibern,
Geruch auftritt;
• Extreme Temperaturen (z. Steckdose, wenn das Gerät längere Zeit Halsketten, Haarnadeln usw. auf.
Français
B. direktes Sonnenlicht in • Gegenstände oder Flüssigkeiten in
das Gerät gelangt sind; außer Betrieb ist. Jegliche Stauban- ......................................................................................
einem geschlossenen sammlung zwischen Netzstecker und 112
Fahrzeug, in der Nähe • das Gerät Regen (oder sonstiger • Gebrauchte Batterien müssen
einer Heizungsleitung, auf Feuchtigkeit) ausgesetzt war; Steckdose kann die Isolierung beeinträch- in Übereinstimmung mit den
Wärmequellen); • das Gerät nicht normal zu funktio- tigen und zu Bränden führen. Bestimmungen Ihres Landes
• Feuchtigkeit (z. B. Bäder, Wasch- nieren scheint oder eine deutliche ...................................................................................... entsorgt werden.
Änderung der Leistungsfähigkeit 104
räume, nasse Fußböden); • Sorgen Sie dafür, dass sich ......................................................................................
• Dampf oder Rauch; aufweist. 118a
..................................................................................... die Kabel und Leitungen • Falls Sie eine USB-Anschlus-
• Salz; 013
• In Haushalten mit kleinen nicht verdrehen oder skappe entfernen, bewahren
• Hohe Luftfeuchtigkeit; verknoten. Achten Sie
Kindern sollte ein Erwach- Sie diese an einem sicheren
• Regen; sener anwesend sein und außerdem darauf, dass sich jegliche Ort außerhalb der Reichweite
• Staub oder Sand; den Betrieb überwachen, bis Kabel und Leitungen außerhalb der
Italiano
von Kindern auf, so dass diese sie nicht
• Starke Vibrationen oder Erschütte- das Kind alle wesentlichen Regeln Reichweite von Kindern befinden. versehentlich verschlucken können.
rungen. beachten kann, die für den sicheren ...................................................................................... ......................................................................................
......................................................................................
007 Betrieb des Geräts unerlässlich sind.
106
• Achten Sie darauf, dass das • Steigen Sie niemals auf das
.....................................................................................
014 Gerät und stellen Sie keine
Gerät immer waagerecht und • Schützen Sie das Gerät vor
stabil steht. Platzieren Sie es schweren Gegenstände
starken Stößen. darauf ab.
nicht auf wackeligen Ständern (Lassen Sie es nicht fallen!)
oder auf schiefen Standflächen. ......................................................................................
......................................................................................
008b
.....................................................................................
015
107d
• Verwenden Sie ausschließlich • Betreiben Sie das Netzteil nicht • Berühren Sie das Netzteil
das angegebene Netzteil (PSA- zusammen mit einer zu großen oder dessen Netzkabel
niemals mit nassen Händen,
Español
Serie), und achten Sie darauf, Anzahl von Geräten an einer
dass die Netzspannung mit der einzigen Netzsteckdose. Seien wenn Sie dieses in eine
auf dem Netzteil angegebenen Betriebs- Sie besonders vorsichtig beim Einsatz von Steckdose oder in das Gerät stecken
spannung übereinstimmt. Andere Verlängerungskabeln – die Gesamtlei- oder es herausziehen.
Netzteile verwenden möglicherweise eine stung aller an der Verlängerung betrie- ......................................................................................
108b
umgekehrte Polung oder sind für andere benen Geräte darf die für das • Bevor Sie das Gerät bewegen,
Spannungen ausgelegt. Daher kann deren Verlängerungskabel angegebene zuläs- ziehen Sie das Netzteil sowie
Verwendung Schäden, Fehlfunktionen sige Leistung (Watt-/Ampère-Zahl) nicht alle Kabel von/zu externen
oder elektrische Schläge auslösen. überschreiten. Übermäßige Last kann Geräten heraus.
......................................................................................
009
dazu führen, dass sich die Isolierung ......................................................................................
• Verdrehen oder biegen Sie erhitzt und ggf. schmilzt. 109b
..................................................................................... • Bevor Sie das Gerät reinigen,
Português
13
ME-25_g.book 14 ページ 2014年9月24日 水曜日 午後12時55分
WICHTIGE HINWEISE
Stromversorgung: Reparaturen und Daten
352b 562
wie z. B. Mobiltelefone in der • Beachten Sie, dass alle im Speicher des an diesem Gerät keine Kabel mit Wider-
301
Umgebung dieses Geräts verwendet Geräts gespeicherten Daten verloren ständen. Die Verwendung solcher Kabel
• Schließen Sie dieses Gerät nicht gehen können, wenn das Gerät zur
werden. Diese Geräusche können bei kann dazu führen, dass der Signalpegel
zusammen mit anderen elektrischen Reparatur eingeschickt wird. Für
abgehenden oder ankommenden sehr niedrig oder sogar unhörbar ist.
Geräten an die gleiche Netzsteckdose an, wichtige Daten sollte immer eine Siche-
Gesprächen oder während der Für Informationen über die techni-
die von einem Wechselrichter gesteuert rungskopie auf einem Computer erstellt
Verbindung entstehen. Sollten Sie schen Daten Ihrer Kabel wenden Sie
werden (z. B. Kühlschrank, Waschma- werden. Alternativ können die Daten
Probleme dieser Art haben, verwenden sich an den jeweiligen Hersteller.
schine, Mikrowellenofen oder Klima- auch auf Papier festgehalten werden.
Sie die Mobilfunk-Geräte in größerer
anlage) oder einen Motor enthalten. Je Bei Reparaturen wird sorgfältig darauf
Entfernung zu diesem Gerät, oder
nach der Art und Weise, in der das geachtet, dass keine Daten verloren
schalten Sie sie aus.
elektrische Gerät verwendet wird, können
die von diesem erzeugten Interferenzen
354a
Wenn es nicht möglich ist, eine geson- einem geschlossenen Fahrzeug liegen, Roland übernimmt in diesem Fall keine • Verwenden Sie dieses Gerät nicht für
derte Steckdose zu verwenden, schalten und setzen Sie es auch sonst keinen Haftung für diesen Datenverlust. Zwecke, bei denen die Urheberrechte
Sie einen Netzentstörfilter zwischen extremen Temperaturen aus. Übermäßi- Dritter verletzt werden können. Für bei
dieses Gerät und die Netzsteckdose. ge Hitze kann zu Verformungen oder der Nutzung des Geräts begangene
302
Verfärbungen des Geräts führen. Verstöße gegen den Urheberschutz von
• Das Netzteil erwärmt sich nach andau-
erndem mehrstündigem Gebrauch.
355b
• Wenn das Gerät bei einem Transport Zusätzliche Dritten übernehmen wir keinerlei
Verantwortung.
Dies ist normal und kein Grund zur aus kalter/trockener Umgebung in eine
feucht-warme Umgebung gelangt,
Vorsichtsmaßnahmen
Beunruhigung. 551
• MMP (Moore Microprocessor Portfolio)
303a
können sich Wassertröpfchen (Konden- • Die Inhalte des Speichers können bezeichnet ein Patent-Portfolio zu
• Wenn Sie das ME-25 für eine längere infolge einer Fehlfunktion oder unsach-
sation) im Geräteinneren bilden. Es Mikroprozessorarchitektur, das von
Dauer benutzen, wird die Verwendung gemäßer Bedienung des Geräts unwie-
können Schäden oder Fehlfunktionen Technology Properties Limited (TPL)
eines Netzgeräts empfohlen. Falls Sie derbringlich verloren gehen. Zum
auftreten, falls Sie versuchen, das Gerät entwickelt wurde. Roland hat für diese
den Betrieb mit Batterie bevorzugen, Schutz vor dem Verlust wichtiger Daten
unter diesen Bedingungen zu Technologie eine Lizenz von der TPL-
empfehlen wir Alkalibatterien. empfehlen wir das regelmäßige
304b betreiben. Bevor Sie das Gerät Gruppe erworben.
• Die Batterien sollten stets eingesetzt oder verwenden, lassen Sie es mehrere Erstellen einer Sicherungskopie der im
ausgetauscht werden, bevor weitere Stunden lang stehen, bis die Konden- Speicher des Geräts gespeicherten • Roland, BOSS und COSM sind einge-
Geräte angeschlossen werden. Auf diese sation vollständig verdampft ist. wichtigen Daten auf einem Computer. tragene Warenzeichen bzw. Waren-
Weise können Sie Fehlfunktionen und/ 360 552
• Bei Verlust von im Speicher des Geräts zeichen der Roland Corporation in den
• Je nach Material und Temperatur der
oder Schäden an Lautsprechern oder oder auf dem Computer gespeicherten USA und/oder anderen Ländern.
Oberfläche, auf der Sie das Gerät
anderen Geräten vermeiden. Daten kann das Wiederherstellen dieser 204220
306b platzieren, können dessen Gummifüße • Alle in dieser Bedienungsanleitung
• Im Lieferumfang des Geräts sind die Oberfläche verfärben oder beein- Daten unter Umständen unmöglich
erwähnten Produktnamen sind Waren-
Batterien enthalten. Die Lebensdauer trächtigen. sein. Die BOSS/Roland Corporation
zeichen bzw. eingetragene Waren-
dieser Batterien kann jedoch einge- Sie können ein Stück Filz oder Stoff übernimmt für einen derartigen Daten-
zeichen der jeweiligen Besitzer.
schränkt sein, da ihr Hauptzweck darin unter die Gummifüße legen, um dies zu verlust keine Haftung.
bestand, Produkttests zu ermöglichen. vermeiden. Achten Sie in diesem Fall
553
• Schalten Sie alle beteiligten Geräte aus, jedoch darauf, dass das Gerät nicht Betätigung der Tasten, Regler und
bevor Sie dieses Gerät mit anderen wegrutschen kann. anderen Bedienelementen sowie beim Druckkonventionen
Geräten verbinden. Auf diese Weise Anschließen von Kabeln an den
können Sie Fehlfunktionen und/oder Buchsen des Geräts. Ein grober Umgang und Symbole in dieser
Schäden an den Lautsprechern oder
anderen Geräten vermeiden.
Wartung 556
kann zu Fehlfunktionen führen. Bedienungsanleitung
401a • Wenn Sie Kabel anschließen oder
• Für die normale Reinigung wischen Sie abziehen, ergreifen Sie das Kabel immer
das Gerät mit einem weichen, trockenen am Stecker – ziehen Sie niemals am Text oder Ziffern bezeichnen die
oder leicht angefeuchteten Tuch ab. Um Kabel selbst. Auf diese Weise vermeiden in rechteckigen Tasten.
Aufstellung hartnäckigen Schmutz zu entfernen, Sie Kurzschlüsse und Schäden an den Klammern [ ] [WRITE] WRITE-Taste
351
verwenden Sie ein mit einer milden, nicht inneren Bestandteilen der Kabel.
• Der Einsatz des Geräts in der Nähe von scheuernden Seifenlösung getränktes 558a
Weist auf Informatio-
Leistungsverstärkern (oder anderen
Geräten mit großen Transformatoren) Tuch. Wischen Sie danach sorgfältig mit • Halten Sie die Lautstärke des Geräts auf
einem vernünftigen Maß, um die
HINWEIS nen hin, die Sie ken-
einem weichen trockenen Tuch nach. nen müssen, wenn
kann ein Brummen verursachen. Um 402 Nachbarn nicht unnötig zu stören. Sie
dieses Problem zu umgehen, ändern Sie • Verwenden Sie kein Benzin oder können z. B. auch Kopfhörer Sie das ME-25 ver-
die Ausrichtung dieses Geräts, oder Verdünnungsmittel, Alkohol oder verwenden, sodass Sie sich nicht sorgen wenden.
stellen Sie es in größerer Entfernung zur sonstige Lösemittel, um Verfärbungen müssen, ob Sie andere Personen stören
und/oder Verformungen zu vermeiden. Weist auf zusätzli-
352a
Störquelle auf.
559a
könnten (besonders spät nachts). MERKE che Informationen
• Dieses Gerät kann den Empfang von • Wenn Sie das Gerät transportieren über einen Bedien-
Radio- und Fernsehsignalen stören. müssen, verpacken Sie es wenn vorgang hin.
Verwenden Sie dieses Gerät nicht in der möglich in dem Originalkarton
Nähe solcher Empfangsgeräte. (einschließlich des Verpackungsmate- Weist auf Informatio-
rials), in dem es geliefert wurde. TIPP nen über einen
Anderenfalls sollten Sie versuchen, geeigneten Bedien-
ähnliches Packmaterial zu verwenden. vorgang hin.
Weist auf eine Refe-
Siehe renzseite hin.
(S. **)
Technische Daten
ME-25: Gitarren-Multieffekt Ausgangsimpe- 2 kOhm Gewicht 1,9 kg, 4 lbs 4 oz
danz (einschließlich Batterien)
AD-Wandlung 24-Bit + AF-Methode
* AF-Methode (Adaptive-Focus- Display 7 Segmente, 2 Zeichen LED Beigefügtes Bedienungsanleitung
Methode) Zubehör Sound Library/Speicher-Liste (Faltblatt)
Diese urheberrechtlich geschützte Stromversor- 9 V Gleichspannung Sound Library-Aufkleber
Methode von Roland & BOSS verbes- gung Trockenbatterien Trockenbatterien (Alkalibatterie:
sert den Signal-Rausch-Abstand (S/ (Typ R6/LR6 (AA)) x 6 (Typ LR6 (AA)) x 6
N-Verhältnis) der A/D- und D/A- Netzteil (BOSS PSA-Serie: separat Roland Service (Informationsblatt)
Wandler in erheblichem Maße. erhältlich) Optionen Netzteil: BOSS PSA-Serie
DA-Wandlung 24-Bit Stromverbrauch 150 mA * 0 dBu = 0,775 Vrms
Sampling- 44,1 kHz Maximale Batte- Alkalibatterie: 9 Stunden * Änderungen der technischen Daten und des Designs
Frequenz rielebensdauer Kohlebatterie: 3 Stunden sind möglich und bedürfen keiner vorherigen Ankündi-
Speicher 60 bei Dauerbetrieb (Diese Werte variieren je nach den tat- gung.
sächlichen Betriebsbedingungen.)
Nomineller INPUT: –10 dBu Abmessungen 300 (B) x 191 (T) x 72 (H) mm
Eingangspegel AUX IN: –18 dBu 11-13/16 (B) x 7-9/16 (T) x 2-7/8 (H)
Zoll
Eingangsimpe- INPUT: 1 M Ohm
danz Maximale Höhe:
AUX IN: 22 kOhm 300 (B) x 191 (T) x 93 (H) mm
Nomineller Aus- –10 dBu 11-13/16 (B) x 7-9/16 (T) x 3-11/16 (H)
gangspegel Zoll
14
ME-25_f.book 1 ページ 2014年9月24日 水曜日 午前11時21分
Mode d’emploi
Avant d'utiliser cet appareil, lisez attentivement les sections suivantes : « CONSIGNES DE SÉCURITÉ » (p. 13) et «
REMARQUES IMPORTANTES » (p. 14).
Ces sections fournissent d'importantes informations relatives au bon fonctionnement de l’appareil. En outre, pour
English
vous garantir la maîtrise parfaite des différentes fonctions proposées par votre appareil, il est nécessaire de lire ce
manuel dans son intégralité. Vous devez conserver ce manuel sous la main afin de pouvoir vous y reporter au besoin.
Deutsch
Branchements et mise sous tension.............. 2
Principales fonctionnalités En avant la musique !...................................... 3
De nombreux algorithmes de
modélisation de préampli réalistes à
Utilisation de la sonothèque.......................... 4
l'aide de la technologie COSM Enregistrement de sons (mise en mémoire)..... 4
Français
L'appareil est équipé de divers amplificateurs
COSM (dix différents), allant d'un son clair à un
Paramétrage précis des effets (Mode Edit)... 5
son à haut gain. Réglage du suppresseur de bruit.................................................5
Grâce à la sonothèque, le son qu'il Guide des effets ..........................................................................6
vous faut quand il faut COMP/FX (Compresseur/effets)....................................................6
Vous pouvez obtenir les sons dont vous rêvez OD/DS (Saturation/distorsion) ......................................................6
PREAMP .................................................................................................6
Italiano
très facilement : il vous suffit de sélectionner une
catégorie et une variation. MODULATION .....................................................................................7
Fonction Super Stack DELAY.....................................................................................................7
D'une simple pression sur un bouton, obtenez la REVERB...................................................................................................8
puissance de son d'un grand amplificateur à tube PEDAL FX (Effets associés à la pédale)........................................8
multicorps. Fonctions pratiques........................................ 9
Fonctionnalité Phrase Loop
Accordage de la guitare (fonction Tuner) .........................9 Español
Vous pouvez enregistrer et rejouer en boucle des
phrases d'une durée allant jusqu'à 38 secondes. Lecture de phrases en boucle (Phrase Loop Play)....... 10
Branchement à la prise USB d'un PC Vérification des valeurs des commandes ....................... 10
Vous pouvez utiliser des stations de travail audio Mode de gestion des commandes rotatives
numériques (DAW) pour réaliser des enregistrements (immédiat/différé)................................................................... 10
numériques et pour importer des nouveaux sons.
Português
Guitare
Étape
4 REMARQUE
Utilisez uniquement un
électrique
Mettez l'ampli sous tension en dernier !
Ampli de guitare
Étape
2 Adaptateur secteur série
PSA (vendu séparément)
Branchez l’appareil
Étape
3 à la prise OUTPUT.
Emplacement pour un câble
Le branchement du jack à la prise de sécurité antivol, disponible
INPUT met le ME-25 sous tension. dans le commerce.
http://www.kensington.com/
MÉMO
Durée de vie prévisible des piles en utilisation continue : carbone : 3 heures, alcaline : 9 heures
Ces chiffres varient en fonction des conditions réelles d’utilisation.
Lorsque l'appareil est uniquement alimenté par une pile, l'intensité lumineuse du voyant diminue lorsque le niveau de charge de la pile
devient insuffisant. Remplacez les piles dès que possible.
Nous vous recommandons de conserver les piles installées dans l'appareil même lorsque vous le faites fonctionner avec l'adaptateur secteur.
Ainsi, vous pourrez continuer à jouer même si le cordon de l'adaptateur secteur se débranche accidentellement de l'appareil.
2
ME-25_f.book 3 ページ 2014年9月24日 水曜日 午前11時21分
En avant la musique !
Une fois les branchements effectués, essayez de produire des sons tout en manipulant le ME-25.
English
fonction d'accordage. Éteint : la pédale contrôle le volume.
Deutsch
Affichage Utilisation de la fonction
S'affiche ici le son Super Stack
(mémoire)
actuellement Pour obtenir le son puissant
sélectionné, ainsi d'un grand amplificateur à tube
que d'autres multicorps même avec un
informations. ampli plus modeste.
Français
En appuyant sur ce bouton,
vous activez la fonction Super
Stack ; le voyant SUPER STACK
s'allume alors.
Italiano
Sélection de sons Solo Réglage du volume et de la qualité sonore
Ceci vous permet de passer à des sons adaptés à des Bouton DRIVE
performances en solo. En appuyant sur cette pédale, vous Ceci permet de définir la distorsion du préampli.
activez la fonction SOLO ; le voyant de la pédale s'allume alors. Bouton TONE
Ceci permet de régler la qualité sonore du préampli.
Bouton VOLUME Español
Une fois la fonction SOLO activée, tournez le bouton VOLUME afin
Ceci permet de régler le volume du préampli.
de régler le volume souhaité pour le solo.
* Réglage impossible en mode Edit (p. 5).
Les boutons sont désactivés lorsque le préampli est hors
Lecture de phrases en boucle (Phrase Loop Play) tension. Pour vérifier si le préampli est sous tension ou
hors tension, passez en mode Edit (p. 5).
Vous pouvez activer la fonction Phrase Loop en appuyant ASTUCE
Português
sur cette pédale pendant deux secondes ou plus. Vous pouvez sauvegarder vos propres réglages.
Voir la section Lecture de phrases en boucle (Phrase Loop Play) (p. 10) Voir la section Enregistrement de sons (mise en mémoire) (p. 4)
ASTUCE
Si des résultats inattendus se produisent – aucun son n'est produit, par exemple – vérifiez les points suivants.
Nederlands
3
ME-25_f.book 4 ページ 2014年9月24日 水曜日 午前11時21分
Utilisation de la sonothèque
Pour plus d'informations sur les sons de la sonothèque, lisez la liste de la sonothèque (fichier séparé).
MÉMO
Il n'est pas possible d'ajouter ni d'enregistrer des sons dans la
sonothèque à l'aide du ME-25. Si vous souhaitez réutiliser certains
sons, vous devez les enregistrer dans la mémoire (mise en mémoire).
ASTUCE
Lorsque vous mémorisez des sons, placez-les dans l'ordre dans lequel
vous les utiliserez lors de la prestation.
1,3 MÉMO
Pour annuler la procédure de mise en mémoire, appuyez sur [EXIT].
4
ME-25_f.book 5 ページ 2014年9月24日 水曜日 午前11時21分
Le mode Edit vous permet de paramétrer avec précision tous les effets. 1. Maintenez le bouton [EXIT] enfoncé et
appuyez sur [WRITE].
2 L'appareil bascule en mode Edit et « Ed » s'affiche à l'écran.
ASTUCE
Pour sélectionner PEDAL FX, appuyez fermement sur la partie la plus
English
large de la pédale d'expression jusqu'à ce que le voyant PEDAL FX
s'allume.
Deutsch
Exemple : COMP/FX
Réglage de l'effet
Effet désactivé Effet activé MÉMO
Le nombre de choix disponibles dépend de l'effet concerné. Par
exemple, le réglage du type sur 4 sélectionne le type 3 (AC SIM)
Désactivation Allumé Clignotement comme réglage COMP/FX.
4. Réglez l'effet à votre convenance.
5. Appuyez sur le bouton [EXIT].
Français
MÉMO L'appareil quitte le mode Edit.
En mode Edit, c'est la fonction inscrite en italique qui est
active. 6. Si vous souhaitez sauvegarder les réglages que
Exemple : le bouton CLEAN vous venez d'effectuer, suivez la procédure de
mise en mémoire (p. 4).
REMARQUE
Italiano
Le son créé sera perdu si vous n'effectuez pas l'opération de mise en
mémoire avant la mise hors tension de l'appareil ou tout
Il fonctionne comme un bouton COMP/FX. changement de mémoire.
5
ME-25_f.book 6 ページ 2014年9月24日 水曜日 午前11時21分
COMP/FX (Compresseur/effets)
Produit un effet qui maintient le son sans distorsion.
Description
1: COMP Produit un effet qui maintient le son SUSTAIN: ATTACK: LEVEL:
sans distorsion. Permet de définir le maintien Permet de définir l'attaque du Permet de définir le volume de
du son. son de l'effet. l'effet.
2: T.WAH Produit un effet wah-wah SENS: TONE: PEAK:
correspondant à l'intensité de votre Permet de définir la sensibilité Permet de définir le timbre de Permet de définir l'intensité
picking. de réponse au son d'entrée. l’effet Wah. d’effet Wah.
3: AC SIM Transforme le son de votre guitare LOW: HIGH: LEVEL:
électrique en un son de guitare Permet de régler le timbre des Permet de régler le timbre des Permet de définir le volume de
acoustique. basses fréquences. hautes fréquences. l'effet.
OD/DS (Saturation/distorsion)
Ces effets ajoutent un effet tenu ou une distorsion distinctes.
Description
1: BOOST Booster de gain. Efficace pour créer une distorsion avec un DRIVE: TONE: LEVEL:
préamplificateur COSM ou pour créer des timbres clairs et Permet de définir Permet de définir la Permet de définir le
pleins de punch, utilisé seul. l'intensité de la brillance du son. niveau de volume pour
2: OD-1 Son du BOSS OD-1. Produit une distorsion légère, douce. distorsion. OD/DS.
3: T-SCREAM Modélise la pédale Ibanez TS-808.
4: BLUES Saturation unique qui reproduit fidèlement les nuances
du picking.
5: DIST Distorsion aiguë avec un sustain ample.
6: CLASSIC Son dans le style des anciens amplis double-corps.
7: MODERN Son d'un gros ampli de gain élevé.
8: METAL Distorsion qui accentue les moyennes fréquences.
9: CORE Distorsion qui réduit les moyennes fréquences.
10: FUZZ Distorsion dure et lourde.
PREAMP
Modélise la réponse du préamplificateur.
Description
1: CLEAN Son clair, doux et chaud. DRIVE: TONE: VOLUME:
2: TWIN Modélise un Fender Twin Reverb. Permet de définir la Règle la qualité sonore Permet de régler le
distorsion du préampli. du préampli. volume du préampli.
3: TWEED Son crunch, dans le style d'un Fender Bassman.
4: VO DRIVE Son agressif, rappelant un ampli VOX combo.
5: BG LEAD Son lead d'un ampli combo Mesa Boogie. MÉMO
6: MS VINTAGE Son qui rappelle les amplificateurs Marshall des années 70. Les paramètres suivants peuvent être réglés lorsque le
voyant [DRIVE (PREAMP)] clignote rapidement.
7: MS MODERN Modélise le son au gain plus élevé des amplis Marshall En maintenant le bouton [DRIVE (PREAMP)] enfoncé jusqu'à ce
vintage les moins anciens.
qu'« Ed » clignote sur l'affichage, le voyant [DRIVE (PREAMP)]
8: 5150 DRIVE Canal lead d'un Peavey EVH5150. clignote rapidement.
9: R-FIER Modélisation du Mesa/Boogie Dual Rectifier. Appuyez à nouveau sur le bouton [DRIVE (PREAMP)] pour que
le ME-25 repasse en mode de fonctionnement normal.
10: ULTRA METAL Son typique pour le "Métal" d'un ampli dont la conception
exclusive produit une enveloppe sonore distinctive
accompagnée d'une accentuation des basses et d'une
distorsion lourde. BASS: MIDDLE: TREBLE:
Un son idéal pour tous types de jeu metal, notamment les Règle la tonalité des Règle la tonalité des Règle la tonalité des
riffs complexes et intenses, les riffs de basse lourds et fréquences basses. fréquences hautes fréquences.
tonitruants en accordage bas, les solos rapides, et plus moyennes.
encore.
6
ME-25_f.book 7 ページ 2014年9月24日 水曜日 午前11時21分
MODULATION
Ces effets permettent d'accroître, de moduler et/ou de transposer le son.
Description
1: CHORUS Cet effet ajoute une oscillation RATE: DEPTH: E.LEVEL:
subtile pour donner un son plus Permet de définir la vitesse de Permet de définir la richesse de Permet de définir le
ample, plus épais, plus beau. l'effet. l'effet. volume de l'effet.
2: PHASER Cet effet crée un son déphasé de RATE: DEPTH: RESONANCE:
grande envergure. Permet de définir la vitesse de Permet de définir la richesse de Permet de définir
l'effet. l'effet. l'intensité de l'effet.
3: FLANGER Crée un effet de modulation RATE: DEPTH: RESONANCE:
comme un son de moteur d'avion Permet de définir la vitesse de Permet de définir la richesse de Permet de définir
qui monte puis redescend. l'effet. l'effet. l'intensité de l'effet.
4: ROTARY Cet effet produit le son d’un haut- RATE: DEPTH: E.LEVEL:
English
parleur rotatif. Permet de définir la vitesse de Permet de définir la richesse de Permet de définir le
l'effet. l'effet. volume de l'effet.
5: UNI-V Modélise un effet Uni-Vibe, qui RATE: DEPTH: E.LEVEL:
s'inscrit dans le son rock des années Permet de définir la vitesse de Permet de définir la richesse de Permet de définir le
1960. l'effet. l'effet. volume de l'effet.
6: TREMOLO Produit un effet rétro par RATE: DEPTH: E.LEVEL:
modifications cycliques du niveau Permet de définir la vitesse de Permet de définir la richesse de Permet de définir le
de volume.
Deutsch
l'effet. l'effet. volume de l'effet.
7: HARMONIST Crée des harmonies qui rappellent KEY: HARMONY: E.LEVEL:
les guitares double manche. Permet de définir le ton du Permet de définir l’harmonisation. Permet de définir le
* L'effet HARMONIST ne fonctionne morceau joué. volume de l'effet.
que sur des mélodies Ex.
monophoniques.
Français
du son une octave plus bas. Permet de définir le niveau de Permet de définir le
* L'effet OCTAVE ne fonctionne que volume du son direct. volume de l'effet.
sur des mélodies monophoniques.
DELAY
Retarde le son afin de produire un effet d'écho. et vous permet d'ajouter de l'ampleur et de créer des sons complexes.
Description
Italiano
1: 1-99 ms Retard de 1 à 99 ms, idéal TIME: FEEDBACK: E.LEVEL:
pour un effet de Doubling. Permet de définir le retard par intervalles de 1 ms. Permet de définir le Permet de définir le
Ex. nombre de répétitions du volume du son de retard.
2ms 99ms retard.
Lorsque l'option TAP est sélectionnée, vous pouvez définir le tempo du Timing
retard comme croche pointée ou comme noire en battant la mesure sur la
pédale SOLO à au moins deux reprises selon le tempo du morceau.
Le voyant de la pédale SOLO clignote selon le tempo actuel. Son retardé
MÉMO Paramètre
TIME
Lorsque TAP est sélectionné comme type de retard, la fonction SOLO
ne peut être activée ou désactivée.
7
ME-25_f.book 8 ページ 2014年9月24日 水曜日 午前11時21分
REVERB
Permet d'ajouter de longues réverbérations au son.
Description
1: ROOM Permet de simuler la réverbération d’une petite pièce. - - LEVEL:
2: HALL Permet de simuler la réverbération d’une grande salle. Permet de définir le
volume de l'effet.
Pour plus d'informations sur l'utilisation des effets associés à la pédale, reportez-vous à la section Utilisation des effets associés à la pédale (p. 3).
Description
1: WAH Effet wah-wah. - - -
2: +1 OCTAVE Permet de faire varier en continu la hauteur du son jusqu'à
une octave vers le haut et vers le bas.
3: -1 OCTAVE * L'effet OCTAVE ne fonctionne que sur des mélodies
monophoniques.
4: FREEZE Permet d'appliquer un effet de sustain en actionnant une
pédale. Utilisez-le pour conserver le son d'un accord tout
en jouant une ligne mélodique.
8
ME-25_f.book 9 ページ 2014年9月24日 水曜日 午前11時21分
Fonctions pratiques
English
Trop bas Accordé Trop haut
(clignotement rapide) (clignotement rapide)
Deutsch
MEMORY / .
L’accordeur est éteint.
Français
MEMORY / . Vous pouvez régler le volume à l'aide de la pédale
L’accordeur est allumé. d'expression.
Italiano
MEMORY / .
Affichage Ton
35–45 435–445 [Hz]
MÉMO
La valeur du diapason est conservée automatiquement en mémoire.
Par conséquent, il est inutile de procéder à ce réglage à chaque
accordage. Español
Le diapason est réglé sur 40 (440 Hz) à la sortie de l'usine.
9
ME-25_f.book 10 ページ 2014年9月24日 水曜日 午前11時21分
Fonctions pratiques
10
ME-25_f.book 11 ページ 2014年9月24日 水曜日 午前11時21分
Fonctions pratiques
English
le fichier Lisez-moi inclus dans le fichier téléchargé.
Deutsch
Envoi et réception
Réglage du volume de signaux audio
Français
à l'aide du logiciel
REMARQUE
Italiano
Utilisez le logiciel pour régler le niveau d'entrée du signal par connexion USB (il n'est pas possible de le faire directement sur le ME-25).
Pour régler le volume d'une guitare, utilisez la pédale d'expression ou réglez d'autres paramètres liés au volume.
Pour contrôler le son d'entrée, réduisez au minimum le volume à l'aide du logiciel. Puis augmentez progressivement le volume jusqu'à atteindre le
niveau souhaité.
MÉMO
Lorsque le ME-25 est connecté à un ordinateur, le simulateur d'ampli de guitare intégré est activé.
Le signal qui entre par la prise AUX IN n'est pas émis à l'aide de la connexion USB. Español
Português
Nederlands
11
ME-25_f.book 12 ページ 2014年9月24日 水曜日 午前11時21分
Annexes
Circulation du signal
EFFECT
PEDAL FX COMP/FX OD/DS PREAMP USB USB AUX IN
INPUT OUT IN
USB PHONES
NOISE VOLUME
(PEDAL) MODULATION DELAY REVERB
SUPPRESSOR OUTPUT
* Schématiquement, les effets sont branchés dans l'ordre indiqué sur l'illustration ci-dessus. Cependant, cet ordre peut être modifié automatiquement afin
d'optimiser l'ordre de branchement et s'adapter à des réglages particuliers.
12
ME-25_f.book 13 ページ 2014年9月24日 水曜日 午前11時21分
CONSIGNES DE SÉCURITÉ
English
AVERTISSEMENT AVERTISSEMENT
restes de décharge dans le
ATTENTION compartiment à piles à l'aide d'un
morceau de chiffon doux ou d'une
002c 011 101b
• N'ouvrez pas (ni ne modifiez • Ne laissez aucun objet • L’appareil et l’adaptateur serviette en papier. Installez ensuite
d'aucune façon) l'appareil ou (matières inflammables, de nouvelles piles. Pour éviter toute
son adaptateur secteur. pièces, des pins, par exemple) secteur doivent être installés
de telle sorte qu'ils irritation de la peau, veillez à ce que
ni aucun liquide quel qu'il soit l’acide de la pile n'entre pas en
......................................................................................
003 (eau, boissons, etc.) n’interfèrent pas avec leur
propre ventilation. contact avec vos mains ou votre
• N’essayez pas de réparer s'introduire dans l'appareil. peau. Soyez extrêmement vigilant
l’appareil ou d’en remplacer ......................................................................................
des pièces (sauf si le présent 102d afin d'éviter toute projection à
manuel fournit des instructions .....................................................................................
012c
• Saisissez toujours proximité des yeux. Rincez
spécifiques dans ce sens). Pour toute uniquement la prise de sortie immédiatement la zone affectée à
Deutsch
• Mettez immédiatement
opération de maintenance, prenez l'appareil hors tension, ou l’adaptateur secteur l'eau claire si la décharge entre en
contact avec votre revendeur, avec le débranchez l'adaptateur lorsque vous branchez, ou contact avec vos yeux.
centre de maintenance Roland le plus secteur de la prise de débranchez, le présent appareil ou une 6
proche, ou avec un distributeur Roland courant, et demandez une opération de prise murale. • Ne conservez jamais les piles à
agréé (voir la page « Information »). maintenance à votre revendeur, au ...................................................................................... proximité d'objets métalliques, par
......................................................................................
004 centre de maintenance Roland le plus 103b exemple des stylos à billes, des
• N’installez jamais l’appareil proche, ou à un distributeur Roland • Vous devez régulièrement colliers, des épingles à cheveux, etc.
dans l’un des emplacements agréé (voir la page « Information »), débrancher l’adaptateur ......................................................................................
suivants. dans les situations suivantes : secteur et le nettoyer à l’aide 112
• exposé à des températures • l’adaptateur secteur ou le cordon d’un chiffon sec afin de • Les piles usagées doivent être
élevées (par exemple, d’alimentation sont endommagés ; débarrasser les broches de toute la mises au rebut
emplacement exposé à la • en cas de fumée ou d’odeur poussière et d’autres dépôts accumulés. conformément à la
Français
lumière directe du soleil inhabituelle ; Débranchez également la prise de règlementation en vigueur
dans un véhicule fermé, • des objets ou du liquide se sont courant de la prise murale chaque fois dans votre pays.
près d’un conduit chauffé, ou sur un introduits dans l’appareil ; que l’appareil n’est pas utilisé pendant ......................................................................................
dispositif générateur de chaleur) ; • l’appareil a été exposé à la pluie (ou 118a
• embué (par exemple, salle de bains, une longue période. L’accumulation de • Si vous retirez le capuchon
s’est embué de quelque autre façon) ; poussière entre la prise de courant et la
cabinets de toilettes, sur sols • l’appareil ne semble pas fonctionner d'un connecteur USB,
mouillés) ; normalement ou vous notez une prise murale peut entraîner une faible conservez-le hors de portée
• exposé à la vapeur ou à la fumée; modification notable des isolation et provoquer un incendie. des enfants pour éviter toute
• exposé au sel; performances. ...................................................................................... ingestion accidentelle.
104
• humide ; .....................................................................................
013 • Essayez d’éviter que les ......................................................................................
• exposé à la pluie ; • Dans les environnements avec cordons et les câbles ne
• poussiéreux ou sableux; de jeunes enfants, la présence s’entremêlent. Les cordes et
• soumis à de fortes vibrations et d’un adulte est nécessaire pour
Italiano
exercer une surveillance les câbles doivent également
secousses. être placés hors de portée des enfants.
......................................................................................
007
jusqu’à ce que l’enfant soit capable de
respecter toutes les règles essentielles à ......................................................................................
• Assurez-vous que l’appareil 106
est toujours placé sur une une utilisation sans risque de l’appareil. • Ne montez jamais sur
surface plane et qu’il est .....................................................................................
014 l’appareil et ne déposez
stable. Ne placez jamais • Protégez l'appareil des forts jamais d’objets lourds dessus.
l’appareil sur un support susceptible impacts.
d’osciller, ou sur des surfaces inclinées. (Ne le laissez pas tomber.) ......................................................................................
......................................................................................
008b
107d
13
ME-25_f.book 14 ページ 2014年9月24日 水曜日 午前11時21分
REMARQUES IMPORTANTES
Alimentation : Précautions Copyright/Licence/
354a
• Ne branchez pas cet appareil sur une • Gardez à l’esprit que le contenu de la • N’utilisez pas cet appareil pour des
d'un véhicule fermé et ne le soumettez
prise électrique déjà utilisée par un mémoire peut être définitivement actions qui enfreindraient un copyright
pas de quelque manière que ce soit à
appareil électrique contrôlé par un perdu en cas de dysfonctionnement ou détenu par un tiers. Nous déclinons
des températures élevées. Une chaleur
onduleur (par exemple, un de mauvaise utilisation de l’appareil. toute responsabilité en matière
excessive peut déformer ou décolorer
réfrigérateur, un lave-linge, un four Pour vous protéger contre tout risque d’infraction des copyrights tiers
l'appareil.
micro-ondes ou un climatiseur) ou qui 355b de perte de données importantes, nous émanant de votre utilisation de cet
comporte un moteur. Suivant le mode • En cas de déplacement d’un endroit vers vous recommandons d’effectuer appareil.
d'utilisation de l'appareil électrique, le un autre où la température et/ou régulièrement une copie de sauvegarde
bruit induit peut provoquer un l’humidité sont très différents, des sur un ordinateur des données • MMP (Moore Microprocessor Portfolio)
dysfonctionnement de l'appareil ou gouttelettes d’eau (de la condensation) importantes que vous avez enregistrées correspond à un portefeuille de brevets
produire un bruit audible. Si, pour des peuvent se former à l’intérieur de dans la mémoire de l’appareil. relatifs à l'architecture de
raisons pratiques, vous ne pouvez pas l’appareil. L’appareil peut alors présenter 552 microprocesseurs développé par
• Malheureusement, il peut s’avérer Technology Properties Limited (TPL).
utiliser une prise électrique distincte, des dysfonctionnements ou des impossible de restaurer le contenu des Roland a été autorisé par le groupe TPL
branchez un filtre de bruit induit entre dommages si vous essayez de l’utiliser données stockées dans la mémoire de à utiliser cette technologie sous licence.
cet appareil et la prise électrique. dans ces conditions. Par conséquent, l'appareil ou sur l'ordinateur lorsqu’elles
302
avant d’utiliser l’appareil, vous devez le
• Au bout de longues heures consécutives sont perdues. BOSS/Roland Corporation • Roland, BOSS et COSM sont des
laisser reposer pendant quelques heures,
d’utilisation, l’adaptateur secteur va déclinent toute responsabilité relative à marques déposées ou des marques
jusqu’à ce que la condensation soit
commencer à produire de la chaleur. Cela une telle perte de données. commerciales de Roland Corporation
complètement évaporée.
est normal et ne pose aucun problème. 360
553
• Manipulez avec précaution les boutons, aux États-Unis et/ou dans d'autres pays.
303a
• Suivant la matière et la température de la
• Nous recommandons le branchement curseurs ou autres contrôles de • Tous les noms de produits mentionnés
surface sur laquelle vous placez l’appareil,
d'un adaptateur secteur pour toute l’appareil, ainsi que les prises et les dans ce document sont des marques ou
il est possible que les pieds en caoutchouc
utilisation prolongée du ME-25. Si vous connecteurs. Une manipulation un peu des marques déposées de leurs
se décolorent ou détériorent la surface.
préférez utiliser une pile, nous brutale peut entraîner des propriétaires respectifs.
Pour éviter cela, vous pouvez disposer un
recommandons le type alcaline. dysfonctionnements.
304b bout de feutre ou de chiffon sous les 556
• Les piles doivent toujours être installées pieds en caoutchouc. Ce faisant, assurez- • Lors du branchement/débranchement
ou remplacées avant de brancher d'autres vous que l’appareil ne risque pas de de tous les câbles, saisissez le Conventions
périphériques. Ce faisant, vous éviterez connecteur et ne tirez jamais sur le
tout dysfonctionnement et/ou dommage
glisser ou d’être déplacé
accidentellement. câble. Vous éviterez ainsi les courts- d'impression et icônes
306b
des haut-parleurs ou d'autres appareils. circuits ou une détérioration des
éléments internes du câble.
de ce manuel
• Des piles sont fournies avec l'appareil. La
durée de vie de ces piles peut cependant Entretien 558a
haut-parleurs ou d’autres appareils. profondeur l’appareil à l’aide d’un • Lorsque vous devez transporter l’appareil, connaître dans le
chiffon doux et sec. utilisez si possible l’emballage d’origine (y cadre de l'utilisation
402
compris ses rembourrages). Sinon, utilisez du ME-25.
Emplacement • N’utilisez jamais d’essence à nettoyer,
de diluants, d’alcool ou de solvants de un emballage équivalent.
351
562
• Il peut y avoir production de bruit si des feuille de papier (si possible). Les (p. **)
appareils de communication sans fil (par réparations sont effectuées avec une
exemple, des téléphones portables) sont extrême prudence afin d’éviter toute
utilisés à proximité de l’appareil. Ce bruit perte de données. Cependant, il peut
peut se produire lors de la réception ou de arriver (par exemple, lorsque le circuit de
l’émission d’un appel, ou encore pendant la mémoire elle-même est défectueux)
une conversation. Si vous rencontrez ces que la restauration des données ne soit
problèmes, vous devez soit déplacer les pas possible. Dans ce cas-là, Roland
appareils sans fil concernés à une plus décline toute responsabilité relative à une
grande distance de l’appareil, soit les telle perte de données.
éteindre.
Caractéristiques techniques
ME-25 : Multi-effets guitare Niveau de sor- -10 dBu Dimensions 300 (L) x 191 (P) x 72 (H) mm
Conversion 24 bits + méthode AF (Adaptive Focus) tie nominale Hauteur maximale :
AD * Méthode AF (Adaptive Focus) Impédance en 2 kilohms 300 (L) x 191 (P) x 93 (H) mm
Il s'agit d'une méthode propre à sortie Poids 1,9 kg (piles comprises)
Roland et BOSS, qui améliore
grandement le rapport signal-bruit et Affichage Sept segments, LED à deux chiffres Accessoires Mode d'emploi
les convertisseurs A/D. Alimentation 9 V continu Liste de la sonothèque/Memory (livret)
Autocollant de la sonothèque
Conversion 24 bits électrique Piles sèches (type R6/LR6 (AA) x 6 Piles sèches (alkaline : type LR6 (AA) x 6
DA Adaptateur secteur (BOSS série PSA, Maintenance Roland (feuille
Fréquence 44,1 kHz vendu séparément) d'information)
d’échantillon- Consomma- 150 mA Options Adaptateur secteur : BOSS série PSA
nage tion
* 0 dBu = 0,775 Vrms
Memory 60 Durée de vie Alcaline : 9 heures * En vue d’améliorer le produit, ses caractéristiques
prévisible des Carbone : 3 heures techniques et/ou son aspect peuvent être modifiés sans
Niveau INPUT : -10 dBu
piles en utili- (Ces chiffres varient en fonction des avis préalable.
d’entrée AUX IN : -18 dBu conditions réelles d’utilisation.)
nominale sation conti-
nue
Impédance INPUT : 1 mégaohm
d’entrée AUX IN : 22 kilohms
14
ME-25_i.book 1 ページ 2014年9月24日 水曜日 午前11時23分
Manuale dell'utente
Prima di utilizzare questa unità, leggere attentamente le sezioni intitolate: “UTILIZZO SICURO DELL'UNITÀ” (p. 13) e
“NOTE IMPORTANTI” (p. 14), che contengono importanti informazioni sul corretto impiego dell'unità. Inoltre, per
avere la sicurezza di aver acquisito una buona conoscenza di ogni funzione fornita dalla nuova unità, è necessario
Italiano
leggere questo manuale nella sua interezza. Si consiglia di salvare il Manuale e tenerlo a disposizione come
riferimento utile.
Deutsch
Collegamento e accensione ........................... 2
Funzioni principali Riproduzione................................................... 3
Amplificatori realistici a modelli fisici
Utilizzo della libreria suoni ............................ 4
che sfruttano la tecnologia COSM
L'unità è dotata di una serie di modelli di Salvataggio dei suoni (scrittura in memoria) ... 4
Français
amplificatori COSM (dieci tipi), dal suono pulito al
suono ad alto guadagno.
Configurazione di impostazioni dettagliate
Potrete cercare il vostro suono per gli effetti (modalità di modifica) ............. 5
all'interno di un'ampia libreria di Regolazione del soppressore di rumore....................................5
Patch Guida agli effetti .........................................................................6
È possibile ottenere il suono ideale COMP/FX (Compressore/Effetti)...................................................6
Italiano
semplicemente selezionando una variazione. OD/DS (Overdrive/Distorsione) ....................................................6
Funzione Super Stack PREAMP .................................................................................................6
MODULATION .....................................................................................7
È possibile ottenere il suono potente di un
amplificatore valvolare di tipo stack di grandi DELAY.....................................................................................................7
dimensioni con la semplice pressione di un REVERB...................................................................................................8
pulsante. PEDAL FX (Effetti pedale) ................................................................8
Funzione Phrase Loop Funzioni utili ................................................... 9 Español
È possibile registrare e riprodurre in loop le vostre
frasi di chitarra fino ad una durata massima di 38
Accordatura della chitarra (Accordatore) ..........................9
secondi. Riproduzione di phrase loop............................................... 10
Collegamento del computer tramite Verifica dei valori dei controlli ............................................ 10
USB Configurazione delle impostazioni per il
Português
Collegamento e accensione
Punto
4 NOTA
Chitarra
elettrica
Accendere per ultimo l'amplificatore.
Punto 1 PC
Utilizzare esclusivamente un
adattatore serie PSA di BOSS.
L'utilizzo di altri adattatori
Quando si esegue il potrebbe causare danni
collegamento, abbassare o guasti.
completamente il volume
di tutta l'apparecchiatura.
Amplificatore
chitarra
Punto
2 Adattatore CA serie PSA
(venduto separatamente)
Collegare l'apparecchiatura
Punto
3 al jack OUTPUT.
Collegare qui un cavo di
Inserire la spina nel jack INPUT protezione antifurto
per accendere l'unità ME-25. disponibile in commercio.
http://www.kensington.com/
Durata prevista della batteria in condizioni d'uso continuo: Al carbonio: 3 ore, Alcaline: 9 ore
I valori indicati variano a seconda delle condizioni d'uso.
Quando l'unità funziona esclusivamente con le batterie e il livello di carica di queste si riduce eccessivamente, l'intensità luminosa
dell'indicatore diminuisce. Sostituire la batteria prima possibile.
Si consiglia di lasciare le batterie installate nell'unità anche quando viene alimentata dall'adattatore CA.
In questo modo, sarà possibile continuare a suonare anche in caso di scollegamento accidentale del cavo dell'adattatore CA dall'unità.
2
ME-25_i.book 3 ページ 2014年9月24日 水曜日 午前11時23分
Riproduzione
Dopo avere eseguito i collegamenti, provare a riprodurre i suoni mentre si aziona l'unità ME-25.
Italiano
la funzione Tuner.
Spento: il pedale controlla il volume.
Spiegazione di memoria Illuminato: il pedale controlla gli effetti.
Un gruppo di impostazioni di effetti è denominato
Per informazioni dettagliate sugli effetti pedale,
"patch". L'unità ME-25 include 60 patch. leggere "PEDAL FX (Effetti pedale)" (p. 8).
Deutsch
Display Utilizzo di Super Stack
Sul display Consente di ottenere il suono
vengono
potente di un amplificatore
visualizzati il
valvolare di tipo stack di grandi
suono selezionato
correntemente dimensioni anche quando si
esegue la riproduzione con
Français
(memoria) e altre
informazioni. amplificatore di piccole
dimensioni.
Premendo questo pulsante
viene attivato Super Stack e
l'indicatore SUPER STACK si
accende.
Italiano
Passaggio agli assolo Regolazione del volume e della qualità tonale
Consente di passare ai suoni adatti agli assolo. Manopola DRIVE
Premendo questo pedale viene attivato SOLO e Consente di regolare il livello di distorsione del preamplificatore.
Manopola TONE
l'indicatore del pedale si accende. Consente di regolare la qualità tonale del preamplificatore.
Manopola VOLUME Español
Ruotare la manopola VOLUME quando SOLO è attivato per Consente di regolare il livello del volume del preamplificatore.
impostare il volume desiderato per l'assolo.
* Non può essere regolato in modalità di modifica (p. 5). Le manopole saranno disattivate quando il preamplificatore è
disattivato. Per verificare lo stato del preamplificatore, passare alla
Riproduzione di phrase loop modalità di modifica (p. 5).
Premendo il pedale per almeno due secondi viene SUGGERIMENTO
Português
SUGGERIMENTO
In caso di risultati non previsti, ad esempio, mancata produzione dei suoni, effettuare le seguenti verifiche.
Nederlands
3
ME-25_i.book 4 ページ 2014年9月24日 水曜日 午前11時23分
Per informazioni sulla libreria suoni, leggere l'elenco di “librerie suoni disponibile” separatamente.
SUGGERIMENTO
Quando si salvano i suoni in memoria, può essere utile posizionarli
nell'ordine in cui si intende utilizzarli durante l'esecuzione.
1,3
Per annullare la procedura di scrittura in memoria, premere [EXIT].
3. Premere di nuovo [WRITE].
Il numero di memoria lampeggerà più rapidamente,
indicando che il suono è stato salvato.
2 SUGGERIMENTO
Per copiare una memoria, richiamare la memoria da copiare, quindi
eseguire semplicemente un'operazione di scrittura in memoria. È
possibile copiare la memoria scegliendo un numero di memoria
differente e salvandola in tale posizione.
4
ME-25_i.book 5 ページ 2014年9月24日 水曜日 午前11時23分
Nella modalità di modifica è possibile configurare impostazioni 1. Tenere premuto [EXIT] e premere [WRITE].
dettagliate per tutti gli effetti.
Sul display viene visualizzata l'indicazione “Ed” e viene attivata
2 la modalità di modifica.
2. Scegliere l'effetto per il quale eseguire le
1 5 3 4 impostazioni.
L'indicatore dell'effetto selezionato lampeggia.
SUGGERIMENTO
Italiano
Per selezionare PEDAL FX, schiacciare completamente la punta del
pedale di espressione finché l'indicatore PEDAL FX non si accende.
Deutsch
Ad ogni pressione del pulsante, lo stato cambia.
Esempio: COMP/FX
Effetto disattivato Effetto attivato Regolazione effetto
Il numero dei tipi varia in base all'effetto. Ad esempio, se si imposta il
tipo COMP/FX su 4 viene selezionato il tipo 3 (AC SIM).
Français
La modalità di modifica viene disattivata.
Italiano
Se prima di eseguire un'operazione di scrittura in memoria, l'unità
viene spenta o vengono scambiate delle memorie, il suono creato
Funziona come il pulsante COMP/FX. viene perso.
5
ME-25_i.book 6 ページ 2014年9月24日 水曜日 午前11時23分
COMP/FX (Compressore/Effetti)
Produce un effetto che sostiene il suono senza distorcerlo.
Spiegazione
1: COMP Produce un effetto che sostiene il SUSTAIN: ATTACK: LEVEL:
suono senza distorcerlo. Consente di impostare l'effetto Consente di impostare l'attacco Consente di impostare il livello
sustain per il suono. (inizio) del suono dell'effetto. del volume dell'effetto.
2: T.WAH Produce un effetto WAH associato SENS: TONE: PEAK:
all'intensità di picco. Consente di impostare la Consente di impostare il tono Consente di impostare
sensibilità di risposta del suono (vivacità) del suono WAH. l'intensità del suono WAH.
di ingresso.
3: AC SIM Trasforma il suono della chitarra LOW: HIGH: LEVEL:
elettrica in un suono di chitarra Consente di regolare il tono della Consente di regolare il tono Consente di impostare il livello
acustica. gamma di bassa frequenza. della gamma di alta frequenza. del volume dell'effetto.
OD/DS (Overdrive/Distorsione)
Questi effetti caratteristici aggiungono distorsione o sustain.
Spiegazione
1: BOOST Booster di guadagno. È ideale per la creazione di DRIVE: TONE: LEVEL:
distorsione con un preamplificatore COSM o per la Consente di impostare Consente di regolare la Consente di impostare il
creazione di toni chiari e dinamici se utilizzato da solo. l'intensità della vivacità del suono. livello del volume per
2: OD-1 Suono di BOSS OD-1. Produce una distorsione lieve e dolce. distorsione. OD/DS.
3: T-SCREAM Consente di modellare un Ibanez TS-808.
4: BLUES Un overdrive esclusivo che riproduce fedelmente le
tonalità del picco.
5: DIST Distorsione intensa con sustain ricco.
6: CLASSIC Suono dell'amplificatore vintage di tipo stack.
7: MODERN Suono dell'amplificatore ad alto guadagno.
8: METAL Distorsione che enfatizza l'intervallo di media frequenza.
9: CORE Distorsione che taglia l'intervallo di media frequenza.
10: FUZZ Distorsione decisamente alta e aspra.
PREAMP
Consente di modellare la risposta del preamplificatore.
Spiegazione
1: CLEAN Suono chiaro, uniforme e caldo. DRIVE: TONE: VOLUME:
2: TWIN Consente di modellare un Fender Twin Reverb. Consente di impostare Consente di regolare la Consente di regolare il
il livello di distorsione qualità tonale del livello del volume del
3: TWEED Suono acuto di un Fender Bassman. del preamplificatore. preamplificatore. preamplificatore.
4: VO DRIVE Suono acuto con reminiscenze di un amplificatore combo
VOX.
5: BG LEAD Suono di base di un amplificatore combo Mesa/Boogie.
6: MS VINTAGE Suono con reminiscenze anni '70. È possibile impostare i seguenti parametri quando l'indicatore
7: MS MODERN Consente di modellare il suono ad alto guadagno degli [DRIVE (PREAMP)] lampeggia rapidamente.
amplificatori Marshall vintage recenti. Tenendo premuto [DRIVE (PREAMP)] finché l'indicatore “Ed” sul display
non inizia a lampeggiare, è possibile fare in modo che l'indicatore su
8: 5150 DRIVE Canale di base di un Peavey EVH5150.
[DRIVE (PREAMP)] lampeggi rapidamente.
9: R-FIER Modella un rectifier doppio MESA/Boogie. Quando si preme nuovamente [DRIVE (PREAMP)], l'unità ME-25 torna
10: ULTRA METAL Amplificatore metal originale di design esclusivo che allo stato normale.
produce un suono con contorni distinti insieme a bassi ben
delineati e a una forte distorsione.
È ideale per tutti i tipi di riproduzione metal, compresi riff BASS: MIDDLE: TREBLE:
complessi e intensi, riff di basso in downtuning forti e Consente di Consente di Consente di
potenti, assolo veloci e molto altro. impostare la qualità impostare la qualità impostare la qualità
tonale dell'intervallo tonale dell'intervallo tonale dell'intervallo
di bassa frequenza. di media frequenza. di alta frequenza.
6
ME-25_i.book 7 ページ 2014年9月24日 水曜日 午前11時23分
MODULATION
Questi effetti ampliano, modulano e/o fanno variare di frequenza (pitch shift) il suono.
Spiegazione
1: CHORUS Questo effetto aggiunge lievi RATE: DEPTH: E.LEVEL:
variazioni per trasformare il tono in un Consente di impostare la Consente di impostare la ricchezza Consente di impostare il
suono più ampio, spesso e piacevole. velocità dell'effetto dell'effetto livello del volume dell'effetto.
2: PHASER Questo effetto crea un ampio suono RATE: DEPTH: RESONANCE:
con cambio di fase. Consente di impostare la Consente di impostare la ricchezza Consente di impostare
velocità dell'effetto dell'effetto l'intensità dell'effetto.
3: FLANGER Crea un effetto di modulazione RATE: DEPTH: RESONANCE:
simile al suono ascendente e Consente di impostare la Consente di impostare la ricchezza Consente di impostare
discendente di un motore a reazione. velocità dell'effetto dell'effetto l'intensità dell'effetto.
4: ROTARY Questo effetto produce il suono di un RATE: DEPTH: E.LEVEL:
Italiano
altoparlante rotante. Consente di impostare la Consente di impostare la ricchezza Consente di impostare il
velocità dell'effetto dell'effetto livello del volume dell'effetto.
5: UNI-V Consente di modellare l'Uni-Vibe, un RATE: DEPTH: E.LEVEL:
effetto che fa parte del suono rock Consente di impostare la Consente di impostare la ricchezza Consente di impostare il
anni 60. velocità dell'effetto dell'effetto livello del volume dell'effetto.
6: TREMOLO Produce un retroeffetto tramite RATE: DEPTH: E.LEVEL:
cambiamenti ciclici del livello di Consente di impostare la Consente di impostare la ricchezza Consente di impostare il
volume. velocità dell'effetto dell'effetto livello del volume dell'effetto.
7: HARMONIST Grazie a questo effetto potrete creare KEY: HARMONY: E.LEVEL:
Deutsch
armonie, come se stessero suonando Consente di impostare la chiave Consente di impostare l'intervallo Consente di impostare il
due chitarre. musicale del brano riprodotto. dell'armonia. livello del volume
* Quando si utilizza l'effetto Us. dell'effetto.
HARMONIST, suonare
esclusivamente note singole
-1 ottava Desintonizzazione +1 ottava
8: OCTAVE Conferisce spessore aggiungendo un - D.LEVEL: E.LEVEL:
suono di un'ottava più basso. Consente di impostare il livello del Consente di impostare il
Français
* Quando si utilizza l'effetto OCTAVE, volume del suono diretto. livello del volume dell'effetto
suonare esclusivamente note singole.
DELAY
Consente di ritardare il suono per produrre l'effetto eco. È possibile aggiungere spessore e creare suoni complessi.
Spiegazione
1: 1-99 ms Delay da 1 a 99 ms TIME: FEEDBACK: E.LEVEL:
Italiano
(millisecondi), ideale Consente di impostare il tempo di delay in incrementi di 1 ms. Consente di impostare Consente di impostare
per un effetto di Us. il numero di ripetizioni il livello del volume
duplicazione. per il delay. dell'effetto delay.
2ms 99ms
pedale SOLO per Consente di impostare il beat per l'effetto delay. Consente di impostare Consente di impostare
impostare il tempo di Us. il numero di ripetizioni il livello del volume
delay (vedere di seguito). per il delay. dell'effetto delay.
Utilizzo degli effetti a tempo con il ritmo della canzone (Tap Tempo)
Quando è selezionato TAP, è possibile impostare il tempo di delay come Tempo
Nederlands
croma o semiminima premendo due o più volte il pedale SOLO a tempo con
il ritmo della canzone.
L'indicatore dei pedali SOLO lampeggia a tempo con il ritmo corrente. Suono delay
Impostazione
TIME
Quando è selezionato TAP come tipo di delay, non è possibile attivare
o disattivare la funzione SOLO.
7
ME-25_i.book 8 ページ 2014年9月24日 水曜日 午前11時23分
REVERB
Consente di aggiungere riverberi prolungati al suono.
Spiegazione
1: ROOM Consente di simulare i riverberi all'interno di una stanza. - - LEVEL:
2: HALL Consente di simulare i riverberi all'interno di una sala. Consente di impostare il
livello del volume
dell'effetto.
Per informazioni su come utilizzare gli effetti pedale, leggere la sezione Utilizzo degli effetti pedale (p. 3).
Spiegazione
1: WAH Effetto WAH. - - -
2: +1 OCTAVE Consente di innalzare o abbassare in modo continuo il
tono di un'ottava rispetto al suono originale.
3: -1 OCTAVE * Quando si utilizza l'effetto OCTAVE, suonare
esclusivamente note singole.
4: FREEZE Consente di impostare l'effetto sustain per il suono
azionando un pedale. Può essere utilizzato per ottenere
un accordo riproducendo contemporaneamente una linea
della melodia.
Utilizzo di FREEZE
1. Premere la parte finale del pedale di espressione.
2. Suonare la chitarra e, durante la riproduzione del suono, premere la parte finale del pedale
di espressione.
Il suono viene prolungato finché si tiene premuto il pedale.
* È possibile regolare il volume del suono con sustain modificando la posizione del pedale.
3. Premere la parte finale del pedale di espressione per interrompere il suono con sustain.
8
ME-25_i.book 9 ページ 2014年9月24日 水曜日 午前11時23分
Funzioni utili
Italiano
Troppo basso Accordato Troppo alto
(lampeggiamento rapido) (lampeggiamento rapido)
Deutsch
5. Premere contemporaneamente i pedali
MEMORY / .
1,2 L'accordatore viene disattivato.
Français
MEMORY / . ingresso, senza l'applicazione di alcun effetto (bypass).
L'accordatore è attivato. È possibile utilizzare il pedale di espressione per controllare il
volume.
2. Se necessario, regolare il tono di riferimento.
È possibile modificare il tono di riferimento tenendo premuto
[EXIT] e premendo i pedali MEMORY / .
Display Tono
Italiano
35–45 435–445 [Hz]
9
ME-25_i.book 10 ページ 2014年9月24日 水曜日 午前11時23分
Funzioni utili
3. Premere [WRITE].
L'impostazione viene salvata nella memoria.
10
ME-25_i.book 11 ページ 2014年9月24日 水曜日 午前11時23分
Funzioni utili
Italiano
Readme incluso nel file scaricato.
Deutsch
Invio e ricezione
Regolazione del di segnali audio
Français
volume utilizzando
il software
Italiano
Utilizzare il software del computer per regolare il livello del segnale di ingresso tramite USB (non è possibile regolarlo nell'unità ME-25).
Per regolare il volume di una chitarra, utilizzare il pedale di espressione o regolare altri parametri di volume.
Per monitorare l'audio in ingresso, prima abbassare completamente il volume utilizzando il software del computer. Quindi, aumentare gradualmente il
livello fino a raggiungere il volume desiderato.
Quando l'unità ME-25 è collegata a un computer, viene attivato automaticamente il simulatore dell'amplificatore di chitarra integrato.
Il segnale in ingresso tramite AUX IN non viene emesso tramite USB. Español
Português
Nederlands
11
ME-25_i.book 12 ページ 2014年9月24日 水曜日 午前11時23分
Appendici
1. Tenere premuto [EXIT] e premere il pedale Quando si utilizza il pedale di espressione, fare attenzione a non
incastrare le dita tra la parte mobile e il pannello. In presenza di
MEMORY . bambini, è necessario che un adulto fornisca supervisione e supporto
Sul display viene visualizzato “FA”. finché il bambino non è in grado di seguire tutte le norme essenziali
per il funzionamento in sicurezza dell'unità.
2. Premere [WRITE]. 1. Tenere premuto [EXIT] e premere il pedale
La Guida per l'accordatura lampeggia.
SOLO.
3. Premere di nuovo [WRITE]. Sul display viene visualizzata l'indicazione “Pd”, quindi “Up.”
Il display lampeggia e vengono ripristinate le impostazioni di 2. Schiacciare completamente la parte finale del
fabbrica. pedale di espressione, quindi rilasciare il
pedale e premere [WRITE].
Sul display viene visualizzata l'indicazione “dn.”
Non spegnere mai l'unità durante il ripristino delle impostazioni di
fabbrica.
3. Schiacciare completamente la punta del
pedale di espressione, quindi rilasciare il
pedale e premere [WRITE].
Sul display viene visualizzato un valore che indica la sensibilità
attuale dell'interruttore del pedale di espressione.
EFFECT
PEDAL FX COMP/FX OD/DS PREAMP USB USB AUX IN
INPUT OUT IN
USB PHONES
NOISE VOLUME
(PEDAL) MODULATION DELAY REVERB
SUPPRESSOR OUTPUT
* Gli effetti sono collegati nell'ordine illustrato sopra. Tuttavia, l'ordine può essere modificato automaticamente per ottimizzare l'ordine di collegamento e
gestire impostazioni particolari.
12
ME-25_i.book 13 ページ 2014年9月24日 水曜日 午前11時23分
UTILIZZO SICURO
materiali in caso di utilizzo improprio che non devono mai essere eseguiti (sono proibiti). • Seguire attentamente le
dell'unità. L'elemento specifico vietato è indicato dall'immagine istruzioni di installazione
contenuta nel cerchio. Il simbolo a sinistra indica che per le batterie e assicurarsi di
ATTENZIONE * Danno materiale si riferisce a danni o altri l'unità non deve mai essere smontata. osservarne la corretta polarità.
effetti avversi causati all'ambiente 2
circostante e ai mobili, nonché ad Il simbolo richiama l'attenzione dell'utente su azioni che • Evitare l'utilizzo di batterie nuove
animali domestici. devono essere eseguite. L'azione specifica da eseguire è insieme ad altre usate. Evitare inoltre
indicata dall'immagine contenuta nel cerchio. Il simbolo a di utilizzare tipi diversi di batterie
sinistra indica che la spina del cavo di alimentazione deve contemporaneamente.
essere staccata dalla presa. 3
• Rimuovere le batterie ogni volta che
OSSERVARE SEMPRE QUANTO SEGUE l'unità deve restare inutilizzata per
un periodo di tempo prolungato.
Italiano
ATTENZIONE ATTENZIONE ATTENZIONE
5
• Se dalla batteria fuoriesce del
002c 011
liquido, utilizzare la parte soffice di
101b
• Non aprire né modificare in • Evitare che qualsiasi tipo di • Posizionare l'unità e un panno o di un tovagliolo di carta
alcun modo l'unità o il oggetto (ad esempio l'adattatore CA in modo che per pulire tutte le rimanenze del
relativo adattatore CA. materiale infiammabile, la posizione non interferisca liquido fuoriuscito
monete, spilli) o liquido con la corretta ventilazione. dall'alloggiamento batterie. Quindi
......................................................................................
003 (acqua, bevande, ecc.) penetri ...................................................................................... installare le nuove batterie. Per
• Non tentare di riparare l'unità o nell'unità. 102d evitare infiammazioni della pelle,
di sostituirne parti interne, ad • Tenere sempre ferma solo la
eccezione dei casi in cui il assicurarsi che nessun liquido
spina di uscita o il corpo fuoriuscito dalla batteria venga a
presente manuale fornisca ..................................................................................... dell'adattatore CA quando si
istruzioni specifiche indicando all'utente contatto con le mani o la pelle.
Deutsch
012c
le modalità di esecuzione di tali • Spegnere immediatamente collega o si scollega una Prestare la massima attenzione per
operazioni. Per qualsiasi tipo di assistenza, l'unità, rimuovere l'adattatore presa da questa unità o da una presa di evitare che il liquido fuoriuscito
rivolgersi al proprio fornitore, al Centro di CA dalla presa e richiedere corrente. venga a contatto con gli occhi.
assistenza Roland più vicino o a un assistenza al proprio ...................................................................................... Sciacquare immediatamente l'area
distributore Roland autorizzato, in base fornitore, al Centro di assistenza Roland 103b
interessata con acqua corrente nel
all'elenco della pagina “Informazioni.” più vicino o a un distributore Roland • A intervalli regolari, è
autorizzato, in base all'elenco nella necessario scollegare caso in cui il liquido fuoriuscito
......................................................................................
004 venga a contatto con gli occhi.
• Non installare l'unità nei pagina “Informazioni” quando: l'adattatore CA e pulirlo 6
luoghi: • l'adattatore CA o il cavo di utilizzando un panno asciutto • Non conservare mai le batterie
• soggetti a temperature alimentazione è danneggiato; per eliminare tutta la polvere e altri insieme a oggetti metallici quali
eccessive (ad esempio, la • si verifica emissione di fumo o di accumuli dai relativi denti. Inoltre, penne a sfera, collane, mollette e
luce solare diretta in un odore insolito; scollegare la spina dalla presa di così via.
Français
veicolo chiuso, vicino a • nell'unità sono caduti oggetti o sono alimentazione ogni volta che l'unità ......................................................................................
una fonte di calore, su stati versati liquidi; deve restare inutilizzata per un periodo 112
apparecchiature che • l'unità è stata esposta a pioggia (o si di tempo prolungato. Eventuali • Le batterie usate devono
generano calore); è bagnata in altro modo); accumuli di polvere tra la spina e la essere smaltite in conformità
• bagnati (ad esempio, bagni, • l'unità non funziona normalmente o presa di alimentazione possono alle normative per il corretto
lavanderie, su pavimenti bagnati); manifesta un cambiamento provocare uno scarso isolamento smaltimento vigenti nella
• esposti al vapore o al fumo; evidente nelle prestazioni. elettrico e causare incendi. regione in cui si trovano.
• soggetti a esposizione salina; ..................................................................................... ...................................................................................... ......................................................................................
• umidi; 013 104 118a
• esposti alla pioggia; • In presenza di bambini, è • Evitare che cavi e fili elettrici • Se si rimuove un cappuccio
• polverosi o sabbiosi; necessario che un adulto si aggroviglino. Inoltre, è del connettore USB,
• soggetti a livelli elevati di vibrazione fornisca supervisione finché il necessario posizionare tutti i conservarlo in un luogo
e tremolio. bambino non è in grado di cavi e i fili elettrici fuori dalla
Italiano
seguire tutte le norme essenziali per il sicuro e lontano dalla portata
...................................................................................... portata di bambini. di bambini, in modo che non lo
007 funzionamento in sicurezza dell'unità.
• Assicurarsi che l'unità sia ..................................................................................... ...................................................................................... ingeriscano per errore.
sempre posizionata in piano 014 106 ......................................................................................
e in modo stabile. Non • Proteggere l'unità da impatti • Mai montare sull'unità né
posizionarla mai su aste che di forte entità. collocare oggetti pesanti su
potrebbero oscillare o su superfici Prestare molta attenzione a di essa.
inclinate. non farla cadere.
...................................................................................... ..................................................................................... ......................................................................................
008b 107d
• Utilizzare solo l'adattatore CA 015
• Per collegare il cavo di • Non maneggiare mai il corpo
specificato (serie PSA) e dell'adattatore CA o le
assicurarsi che l'emissione di alimentazione dell'unità a
una presa di corrente, non relative spine di uscita con
corrente al momento
Español
utilizzare una presa a cui è mani bagnate quando si
dell'installazione corrisponda alla collega o si scollega una presa dall'unità
tensione di corrente in ingresso collegato un numero eccessivo di
specificata sul corpo dell'adattatore CA. dispositivi. Prestare particolare o da una presa elettrica.
Altri adattatori CA potrebbero utilizzare attenzione quando si utilizzando ......................................................................................
una polarità diversa o essere indicati per prolunghe, la potenza massima 108b
una tensione di corrente diversa, pertanto utilizzata da tutti i dispositivi collegati • Prima di spostare l'unità,
il loro utilizzo potrebbe causare danni, alla presa della prolunga non deve mai scollegare l'adattatore CA e
guasti o produrre scosse elettriche. superare la potenza prevista (watt/ tutti i cavi provenienti da
...................................................................................... ampere) per la prolunga in uso. Carichi dispositivi esterni.
009 eccessivi possono causare il
• Non sottoporre a torsione né ......................................................................................
surriscaldamento del materiale isolante 109b
piegare in modo eccessivo il del cavo e provocarne la fusione. • Prima di effettuare la pulizia
cavo di alimentazione, né
Português
13
ME-25_i.book 14 ページ 2014年9月24日 水曜日 午前11時23分
NOTE IMPORTANTI
Alimentazione: uso 354a
• Non esporre l'unità alla luce solare Precauzioni aggiuntive Copyright/Licenza/
delle batterie diretta, non posizionarla in prossimità di
dispositivi che irradiano calore, non
551
• I contenuti della memoria possono Marchi
301
lasciarla all'interno di un veicolo chiuso andare irrimediabilmente perduti in 853
• Non collegare l'unità alla stessa presa caso di guasti o errato utilizzo dell'unità. • Non utilizzare questa unità per fini che
o sottoporla in altri modi a temperature
elettrica utilizzata Per evitare di perdere dati importanti, si potrebbero violare i diritti di copyright
eccessive. Il calore eccessivo può
contemporaneamente da un altro consiglia di salvare periodicamente una detenuti da terze parti. Il Produttore
deformare o scolorire l'unità.
apparecchio elettrico controllato da un 355b copia di backup dei dati importanti non si assume alcuna responsabilità in
invertitore (ad esempio un refrigeratore, • Quando l'unità viene spostata da una contenuti nella memoria dell'unità su alcun caso in relazione a violazioni di
una lavatrice, un forno a microonde o luogo a un altro in cui la temperatura e/o computer. copyright di terze parti provocate
un condizionatore d'aria) o contenente l'umidità sono molto diverse, è possibile 552 dall'utilizzo di questa unità.
un motore. In base al modo in cui che si formino delle goccioline d'acqua • Non sarebbe infatti possibile recuperare
l'apparecchio elettrico viene utilizzato, il i contenuti dei dati memorizzati nella • MMP (Moore Microprocessor Portfolio)
(condensa) all'interno dell'unità. Se si si riferisce a un portafoglio di brevetti
rumore dell'alimentazione potrebbe tenta di utilizzare l'unità in tali condizioni, memoria dell'unità o nel computer
causare il guasto dell'unità o produrre dopo la loro perdita. BOSS/Roland per l'architettura dei microprocessori e
potrebbero verificarsi danni o guasti. sviluppato da Technology Properties
rumore sonoro. Se non è pratico Pertanto, prima di utilizzare l'unità, è Corporation declina qualsivoglia
utilizzare una presa elettrica separata, responsabilità relativamente a una Limited (TPL). Roland utilizza questa
necessario lasciarla spenta per diverse ore tecnologia concessa in licenza da TPL.
collegare un filtro per rumore finché la condensa non sia simile perdita di dati.
dell'alimentazione tra l'unità e completamente evaporata. 553
• Roland, BOSS e COSM sono marchi di
l'apparecchio elettrico. 360 • Utilizzare i pulsanti, i cursori o altri
controlli, nonché i jack e i connettori fabbrica registrati o marchi di fabbrica
302 • In base al materiale e alla temperatura di Roland Corporation negli Stati Uniti
• L'adattatore CA inizierà a generare della superficie su cui si posiziona dell'unità prestando ragionevole
calore dopo molte ore di uso attenzione. Una manipolazione poco e/o in altri paesi.
l'unità, i piedini di gomma potrebbero
consecutivo. Questo è normale e non scolorire o rovinare la superficie. attenta può causare guasti. • Tutti i nomi di prodotto citati in questo
deve destare preoccupazioni. Per evitare che ciò avvenga, è possibile 556
documento sono marchi o marchi
303a • Quando si collegano/scollegano tutti i
• Se si usa l'unità ME-25 per molto tempo, collocare un pezzo di feltro o panno cavi, tenere fermo il connettore senza registrati dei legittimi proprietari.
si consiglia di collegare un adattatore sotto i piedini di gomma. In tal caso, mai tirare il cavo. In tal modo si eviterà
CA. Se si preferisce utilizzare una assicurarsi che l'unità non scivoli o non di causare cortocircuiti o di
batteria, si consiglia di utilizzarne una si sposti in modo accidentale. danneggiare gli elementi interni del Convenzioni
alcalina. cavo. tipografiche e icone
304b
• Installare o sostituire sempre le batterie Manutenzione 558a
• Per evitare di arrecare disturbo ai vicini, utilizzate nel presente
prima di collegare gli altri dispositivi. In 401a cercare di mantenere il volume
tal modo è possibile evitare guasti e/o • Per la pulizia quotidiana, strofinare dell'unità a livelli ragionevoli. È manuale
danni alle casse o ad altri dispositivi. l'unità con un panno soffice e asciutto o preferibile utilizzare le cuffie, in modo
306b leggermente inumidito con acqua. Per da assicurarsi di non provocare rumori
• Le batterie sono fornite con l'unità. La rimuovere lo sporco ostinato, utilizzare molesti alle persone nelle vicinanze Testo e numeri Indicano pulsanti.
durata di queste batterie, tuttavia, un panno imbevuto di un detergente (soprattutto durante le ore notturne). racchiusi tra Pulsante WRITE
potrebbe essere limitata poiché sono delicato e non abrasivo. 559a parentesi quadre [ ] [WRITE]
fornite allo scopo di consentire il test Successivamente, assicurarsi di • Per trasportare l'unità, imballarla nella
dell'unità. strofinare completamente l'unità con scatola originale, includendo Indica
307
un panno soffice e asciutto. l'imbottitura, se possibile. Altrimenti, è informazioni
• Prima di collegare questa unità ad altri 402 necessario utilizzare materiali di importanti per
dispositivi, spegnere tutte le unità. In tal • Non utilizzare mai benzina, diluenti, imballaggio equivalenti. l'utilizzo dell'unità
modo è possibile evitare guasti e/o alcool o solventi di alcun tipo, per 562 ME-25.
danni alle casse o ad altri dispositivi. evitare la possibilità di scoloritura e/o • Alcuni cavi di collegamento
deformazione. contengono resistori. Non utilizzare cavi Indica
con resistori incorporati per il informazioni
Posizionamento collegamento di questa unità. L'utilizzo supplementari
351 Riparazioni e dati di tali cavi può causare una riduzione relative a
• L'utilizzo dell'unità vicino ad amplificatori 452 eccessiva del livello del suono o la un'operazione.
di potenza (o altre apparecchiature • Tutti i dati contenuti nella memoria produzione di suono inudibile. Per
contenenti trasformatori di potenza di dell'unità potrebbero andare persi in informazioni sulle specifiche dei cavi, Indica
grandi dimensioni) potrebbe causare un caso di riparazione. È opportuno contattare il produttore del cavo. SUGGERIMENTO informazioni su
ronzio. Per ridurre il problema, modificare effettuare sempre il backup dei dati un'operazione
l'orientamento dell'unità o allontanarla importanti su un computer oppure comune.
dall'origine di interferenza. trascriverli su documenti cartacei, se
352a
possibile. In caso di riparazioni, viene Indica una pagina
• Questo dispositivo potrebbe interferire di riferimento.
prestata la debita attenzione per evitare
con la ricezione di apparecchi radio e la perdita dei dati. In alcuni casi, (p. **)
televisivi. Non utilizzare questo tuttavia, ad esempio quando lo stesso
dispositivo in prossimità di tali ricevitori.
352b circuito della memoria presenta guasti,
• Se si utilizzano dispositivi di potrebbe non essere possibile
comunicazioni wireless, ad esempio ripristinare i dati. Roland declina
telefoni cellulari, in prossimità qualsivoglia responsabilità
dell'unità, è possibile che si produca del relativamente a tale perdita.
rumore. Tale rumore potrebbe
verificarsi quando si riceve o si avvia
una chiamata o durante la
conversazione telefonica. Se si
verificano tali problemi, è necessario
riposizionare i dispositivi wireless
allontanandoli dall'unità o spegnerli.
Specifiche principali
ME-25: più effetti chitarra Livello di -10 dBu Dimensioni 300 (L) x 191 (P) x 72 (A) mm
uscita nomi- 11-13/16 (L) x 7-9/16 (P) x 2-7/8 (A) pollici
Conversione Metodo 24 bit + AF
AD * Metodo AF (Adaptive Focus) nale Altezza massima:
Metodo proprietario di Roland e Impedenza 2k ohms 300 (L) x 191 (P) x 93 (A) mm
BOSS che migliora notevolmente il 11-13/16 (L) x 7-9/16 (P) x 3-11/16 (A) pollici
rapporto segnale-rumore (S/N) dei uscita
Peso 1,9 kg, 4 lbs 4 oz (incluse batterie)
convertitori A/D e D/A. Display LED a 7 segmenti, 2 cifre
Accessori Manuale dell'utente
Conversione 24 bit Alimentazione CC 9 V Elenco librerie suoni/Memoria
DA Batteria Dry (tipo R6/LR6(AA)) x 6 (foglio illustrativo)
Frequenza di 44,1 kHz Adattatore CA Adesivo librerie suoni
campiona- (serie BOSS PSA: venduto separatamente) Batterie (alcaline: LR6 (AA)) x 6
Assistenza Roland (foglio informativo)
mento Portata 150 mA
attuale Opzioni Adattatore CA: serie BOSS PSA
Memoria 60
Livello di INPUT: -10 dBu Durata previ- Alcalina: 9 ore * 0 dBu = 0,775 Vrms
sta delle bat- Al carbonio: 3 ore * Allo scopo di migliorare il prodotto, le specifiche e/o
ingresso AUX IN: -18 dBu terie con uso (I valori riportati variano a seconda delle l'aspetto di questa unità sono soggetti a modifiche
nominale condizioni d'uso). senza preavviso.
continuo
Impedenza INPUT: 1M ohm
ingresso AUX IN: 22k ohms
14
ME-25_s.book 1 ページ 2014年9月24日 水曜日 午前11時25分
Manual de instrucciones
Antes de utilizar el equipo, lea atentamente las secciones tituladas: “UTILIZACIÓN SEGURA DE LA UNIDAD” (pág. 13)
y “NOTAS IMPORTANTES” (pág. 14).
En estas secciones encontrará información importante acerca de la utilización correcta de la unidad. Además, para
English
adquirir conocimientos adecuados de todas las funciones de su nueva unidad, se recomienda leer íntegramente el
presente manual. Guarde el manual en un lugar accesible para consultarlo cuando sea necesario.
Deutsch
Establecimiento de conexiones y encendido ... 2
Principales características ¡Empecemos a tocar!....................................... 3
Gran cantidad de algoritmos realistas
Uso de la biblioteca de sonidos ..................... 4
de modelado de preamplificador con
COSM Almacenamiento de sonidos
Français
La unidad está equipada con una variedad de (Escritura en memoria) ................................... 4
amplificadores COSM (diez tipos), que van del
sonido limpio al sonido de alta ganancia. Configuración detallada para los efectos
Gracias a la biblioteca de sonidos, (modo Editar) .................................................. 5
puede obtener el sonido correcto Ajuste del supresor de ruidos........................................................5
cuando lo necesita. Guía de efectos............................................................................6
Italiano
Puede lograr el sonido perfecto sencillamente COMP/FX (Compresor/Efectos) ....................................................6
seleccionado una categoría y una variación. OD/DS (Saturación/Distorsión).....................................................6
Función de apilado superior PREAMP .................................................................................................6
Puede disfrutar del potente sonido de un MODULATION .....................................................................................7
amplificador a válvulas de gran tamaño con solo DELAY.....................................................................................................7
pulsar un botón. REVERB...................................................................................................8
Función de bucle de frase PEDAL FX (Efectos de pedal)..........................................................8 Español
Puede grabar y reproducir en bucle frases de Funciones prácticas ........................................ 9
hasta 38 segundos de duración.
Afinación de la guitarra (Afinador).......................................9
Puede conectarse a un PC mediante
Reproducción en bucle de frase ........................................ 10
un USB
Puedes utilizar programas de edición de audio (D Comprobación de los valores de los mandos............... 10
Português
AW) para realizar grabaciones digitales e Ajustes de funcionamiento de los mandos ................... 10
importar nuevos sonidos.
Conexión con equipo mediante USB ............................... 11
Instalación del controlador USB ................................................ 11
Utilizando programas de edición musical (DAW) ............... 11
Acerca de “COSM”
Apéndices ...................................................... 12
Nederlands
Paso 4 NOTA
Guitarra ¡Y solamente al final encienda el amplificador! Asegúrese de utilizar un
adaptador serie PSA de BOSS. El
1
eléctrica PC
uso de cualquier otro adaptador
puede provocar daños o
Paso
deficiencias de funcionamiento.
Al conectarlo, baje al
mínimo el volumen de
todos los dispositivos
Amplificador
de guitarra
Paso 2 Adaptador de CA serie
PSA (debe adquirirlo por
3
Conecte el equipo al separado)
conector OUTPUT.
Paso Conecte aquí un cable de
seguridad antirrobo que
Inserte el enchufe en el conector podrá adquirir en las tiendas
INPUT para encender el ME-25. especializadas.
http://www.kensington.com/
2
ME-25_s.book 3 ページ 2014年9月24日 水曜日 午前11時25分
¡Empecemos a tocar!
Una vez realizadas las conexiones, pruebe a reproducir sonidos mientras utiliza el ME-25.
English
Apagado: El pedal controla el volumen.
¿Qué es una memoria? Encendido: El pedal controla los efectos
Una “memoria” es un grupo de ajustes de de pedal.
Para obtener información detallada sobre los efectos de pedal,
efectos. El ME-25 tiene 60 memorias. consulte “PEDAL FX (Efectos de pedal)” (pág. 8).
Deutsch
Pantalla Uso de apilado superior
Aquí aparece el Le permite obtener el potente
sonido
sonido de un amplficador a
seleccionado
valvulas de gran tamaño
actualmente
(memoria) y otros aunque esté tocando con un
amplificador de tamaño
Français
datos.
pequeño.
Al pulsar este botón se pasa a
Apilado superior y se enciende
el indicador SUPER STACK.
Italiano
Cambio a sonidos de solo Ajuste del volumen y de la calidad del tono
Cambia a sonidos adecuados para interpretaciones Mando DRIVE
solistas. Al pisar este pedal, se activa SOLO y se Ajusta el grado de distorsión del preamplificador.
enciende el indicador del pedal. Mando TONE
APUNTE
Ajusta la calidad de tono del preamplificador. Español
Mando VOLUME
Gire el mando VOLUME mientras SOLO está activado para Ajusta el nivel general de volumen del preamplificador.
ajustar el volumen deseado para el solo.
APUNTE
* No se puede ajustar en el modo Editar (pág. 5).
Los mandos se desactivarán cuando esté apagado el
Reproducción en bucle de frase preamplificador. Para comprobar si el preamplificador está
apagado o encendido, vaya al modo Editar (pág. 5).
Al pisar este pedal durante dos o más segundos se CONSEJO
Português
activa la función de bucle de frase. Puede guardar los valores que ha ajustado.
“Almacenamiento de sonidos
“Reproducción en bucle de frase” (pág. 10) (Escritura en memoria)” (pág. 4)
CONSEJO
Nederlands
En caso de que se produjesen resultados imprevistos, como por ejemplo que no se genere ningún sonido, compruebe lo siguiente:
¿Ha establecido correctamente las conexiones a los demás dispositivos?
Compruebe una vez más las conexiones.
¿El volumen está bajado a tope?
Compruebe los niveles de volumen de cualquier amplificador o mezclador conectado.
¿Ha bajado el nivel con el pedal de expresión?
Si se configura el pedal de expresión para controlar el volumen, no se generan sonidos cuando la punta del pedal está en posición elevada.
3
ME-25_s.book 4 ページ 2014年9月24日 水曜日 午前11時25分
Para obtener información sobre los sonidos de la biblioteca de sonidos, consulte la “lista de la biblioteca de sonidos” que se proporciona aparte.
APUNTE
No se pueden agregar y guardar sonidos en la biblioteca de sonidos
utilizando el propio ME-25. Los sonidos que desee reutilizar deben
estar guardados en la memoria (Escritura en memoria).
CONSEJO
Cuando guarde los sonidos en la memoria, será útil colocarlos en el
orden en que prevea utilizarlos durante la interpretación.
Almacenamiento de sonidos
(Escritura en memoria)
APUNTE
1,3 Para cancelar el procedimiento de escritura en memoria, pulse [EXIT].
3. Vuelva a pulsar [WRITE].
El número de memoria parpadeará más rápidamente,
indicando que se ha guardado el sonido.
2 CONSEJO
Para copiar una memoria, recupere la memoria que desee copiar y,
continuación, efectúe una operación de escritura en memoria. La
memoria puede copiarse seleccionando un número de memoria
diferente y guardándola allí.
4
ME-25_s.book 5 ページ 2014年9月24日 水曜日 午前11時25分
En modo Editar, puede realizar la configuración detallada para 1. Pulse [EXIT] y, sin soltarlo, pulse [WRITE].
todos los efectos.
Aparece “Ed” en la pantalla y el funcionamiento cambia a
modo Editar.
2
2. Elija el efecto cuyos ajustes desee configurar.
1 5 3 4 El indicador del efecto seleccionado parpadeará.
CONSEJO
Para seleccionar PEDAL FX, pise la punta del pedal de expresión hasta
English
que se encienda el indicador PEDAL FX.
Deutsch
Cada pulsación de botón cambia el estado.
APUNTE
Ejemplo: COMP/FX
El número de tipos varía según el efecto. Por ejemplo, al configurar
Efecto desactivado Efecto activado Ajuste de efecto el tipo COMP/FX en 4, se selecciona 3 (AC SIM) como el tipo.
4. Ajuste el efecto según sus preferencias.
Off Encendido Parpadeo 5. Pulse [EXIT].
Se sale del modo Editar.
Français
6. Para guardar los ajustes que acaba de realizar,
APUNTE lleve a cabo el procedimiento de Escritura en
En el modo Editar, la función que aparece en cursiva está
activada.
memoria (pág. 4).
Ejemplo: botón CLEAN
Si apaga el equipo o cambia las memorias antes de realizar una
Italiano
operación de Escritura en memoria, el sonido creado se perderá.
APUNTE
Un ajuste de t0 (cero) desactiva el supresor de ruidos.
Un ajuste del supresor de ruidos superior al necesario puede
provocar que no se genere sonido al tocar la guitarra a bajo volumen.
2 3. Pulse [EXIT (EDIT)].
Nederlands
5
ME-25_s.book 6 ページ 2014年9月24日 水曜日 午前11時25分
Guía de efectos
Los nombres de todos los productos mencionados en este documento son marcas comerciales o registradas de sus respectivos titulares.
Estas empresas no están asociadas a BOSS y no han cedido bajo licencia ni autorizado ME-25 de BOSS. Sus marcas se utilizan
exclusivamente para identificar aquellos equipos cuyos sonidos simula ME-25 de BOSS.
COMP/FX (Compresor/Efectos)
Produce un efecto que sostiene el sonido sin distorsiones.
Explicación
1: COMP Produce un efecto que sostiene el SUSTAIN: ATTACK: LEVEL:
sonido sin distorsiones. Ajusta el sostenido del sonido. Ajusta el ataque del sonido del Ajusta el nivel de volumen del
efecto. efecto.
2: T.WAH Esto produce un efecto WAH ajustado a SENS: TONE: PEAK:
la intensidad de la captación. Ajusta la sensibilidad de Ajusta el tono (brillantez) del Ajusta la intensidad del sonido
respuesta al sonido de entrada. efecto WAH. del efecto WAH.
3: AC SIM Transforma el sonido de la guitarra LOW: HIGH: LEVEL:
eléctrica en un sonido de guitarra Ajusta el tono de la gama de Ajusta el tono de la gama de Ajusta el nivel de volumen del
acústica. bajas frecuencias. altas frecuencias. efecto.
OD/DS (Saturación/Distorsión)
Estos efectos aportan una distorsión o un sostenido característicos.
Explicación
1: BOOST Esto es un reforzador de ganancia. Da buenos resultados para crear DRIVE: TONE: LEVEL:
distorsiones con un preamplificador COSM, así como para crear tonos Ajusta la intensidad Ajusta la brillantez del Ajusta el nivel de
notablemente limpios si se utiliza solo. de la distorsión. sonido. volumen de OD/DS.
2: OD-1 Este es el sonido del BOSS OD-1. Produce una suave y dulce
distorsión.
3: T-SCREAM Modela un Ibanez TS-808.
4: BLUES Esta es una saturación exclusiva que reproduce fielmente los
matices de la captación.
5: DIST Esta es una aguda distorsión con un rico sostenido.
6: CLASSIC Este es el sonido de un amplificador apilado clásico.
7: MODERN Este es el sonido de un amplificador de alta ganancia de gran tamaño.
8: METAL Esta es una distorsión que enfatiza la gama media.
9: CORE Esta es una distorsión que corta la gama media.
10: FUZZ Esta es una distorsión característicamente áspera y pesada.
PREAMP
Permite modelar la respuesta del preamplificador.
Explicación
1: CLEAN Este es un sonido limpio, suave y cálido. DRIVE: TONE: VOLUME:
2: TWIN Modela un Fender Twin Reverb. Ajusta el grado de Ajusta la calidad de Ajusta el nivel general
distorsión del tono del de volumen del
3: TWEED Este es un sonido crunch de un Fender Bassman. preamplificador. preamplificador. preamplificador.
4: VO DRIVE Este es un sonido crunch que recuerda al de un
amplificador combinado VOX.
5: BG LEAD Este es un sonido base de un amplificador combinado APUNTE
Mesa/Boogie.
Puede configurar los siguientes parámetros mientras el indicador
6: MS VINTAGE Este es un sonido reminiscente de los amplificadores [DRIVE (PREAMP)] parpadea rápidamente.
Marshall de la década de los 70.
Al mantener pulsado [DRIVE (PREAMP)] hasta que el texto “Ed”
7: MS MODERN Modela el sonido de alta ganancia de los amplificadores empieza a parpadear en la pantalla, puede hacer que el indicador de
Marshall clásicos. [DRIVE (PREAMP)] parpadee rápidamente.
8: 5150 DRIVE Es un canal base de un Peavey EVH 5150. Cuando pulse de nuevo [DRIVE (PREAMP)], el ME-25 vuelve a su estado
9: R-FIER Modela un rectificador Mesa/Boogie dual. normal.
6
ME-25_s.book 7 ページ 2014年9月24日 水曜日 午前11時25分
MODULATION
Estos efectos amplían, modulan y/o cambian el tono del sonido.
Explicación
1: CHORUS Este efecto aporta una sutil RATE: DEPTH: E.LEVEL:
fluctuación que transforma el tono y Ajusta la velocidad del efecto Ajusta la riqueza del efecto Ajusta el nivel de
lo hace más amplio, fino y bello. volumen del efecto.
2: PHASER Este efecto crea un sonido desfasado RATE: DEPTH: RESONANCE:
de gran amplitud. Ajusta la velocidad del efecto Ajusta la riqueza del efecto Ajusta la intensidad del
efecto.
3: FLANGER Esto crea un efecto de modulación RATE: DEPTH: RESONANCE:
semejante al sonido ascendente y Ajusta la velocidad del efecto Ajusta la riqueza del efecto Ajusta la intensidad del
descendente de un motor de reacción. efecto.
4: ROTARY Este efecto produce el sonido de RATE: DEPTH: E.LEVEL:
English
altavoces girando. Ajusta la velocidad del efecto Ajusta la riqueza del efecto Ajusta el nivel de
volumen del efecto.
5: UNI-V Esto modela el Uni-Vibe, un efecto RATE: DEPTH: E.LEVEL:
que es parte de los sonidos del rock Ajusta la velocidad del efecto Ajusta la riqueza del efecto Ajusta el nivel de
de la década de los 60. volumen del efecto.
6: TREMOLO Esto produce un efecto retro RATE: DEPTH: E.LEVEL:
mediante cambios cíclicos del nivel Ajusta la velocidad del efecto Ajusta la riqueza del efecto Ajusta el nivel de
de volumen.
Deutsch
volumen del efecto.
7: HARMONIST Esto crea armonías que recuerdan las KEY: HARMONY: E.LEVEL:
guitarras dobles. Ajusta la clave musical de la Ajusta el tono de la armonía. Ajusta el nivel de
* Cuando utilice el efecto armónico, canción interpretada. volumen del efecto.
interprete solamente notas simples Ej.
Français
una octava más bajo. Ajusta el nivel de volumen del Ajusta el nivel de
* Cuando utilice el efecto de octava, sonido directo. volumen del efecto
interprete solamente notas simples.
DELAY
Esto retarda el sonido para generar un efecto similar al eco. Permite aportar grosor y crear sonidos complejos.
Explicación
Italiano
1: 1-99 ms Este es un retardo de 1 a 99 ms TIME: FEEDBACK: E.LEVEL:
(milisegundos), ideal para un Ajusta el retardo en incrementos de 1 ms. Ajusta el número de veces Ajusta el nivel de volumen
efecto de duplicación. Ej. que se repite el sonido de del sonido de retardo.
2ms 99ms retardo.
7
ME-25_s.book 8 ページ 2014年9月24日 水曜日 午前11時25分
REVERB
Esto añade reverberaciones dilatadas al sonido.
Explicación
1: ROOM Simula las reverberaciones de una habitación. - - LEVEL:
2: HALL Simula las reverberaciones de una sala. Ajusta el nivel de
volumen del efecto.
Para obtener información sobre cómo usar los efectos de pedal, consulte Uso de los efectos de pedal (pág. 3).
Explicación
1: WAH Este es un efecto WAH. - - -
2: +1 OCTAVE Esta opción le permite variar continuamente el tono hasta
una octava más alta o más baja que el sonido original.
3: -1 OCTAVE * Cuando utilice el efecto de octava, interprete solamente
notas simples.
4: FREEZE Le permite sostener el sonido utilizando un pedal. Puede
utilizarlo para mantener un sonido de acorde mientras
interpreta una línea melódica.
Uso de FREEZE
1. Pise el talón del pedal de expresión.
2. Toque la guitarra y, mientras se interpreta el sonido, pise la punta del pedal de expresión.
El sonido se sostiene mientras mantenga pisado el pedal.
* Es posible ajustar el volumen del sonido sostenido cambiando la posición del pedal.
3. Al pisar el talón del pedal de expresión se interrumpe el sonido sostenido.
8
ME-25_s.book 9 ページ 2014年9月24日 水曜日 午前11時25分
Funciones prácticas
English
Demasiado alto Afinado Demasiado alto
(parpadeo rápido) (parpadeo rápido)
Deutsch
El afinador se apaga.
Français
El afinador está encendido.
2. Si es preciso, ajuste el tono de referencia.
Para cambiar este tono, mantenga pulsado [EXIT] y pise los
pedales MEMORY / .
Pantalla Tono
35–45 435–445 [Hz]
Italiano
APUNTE
El ajuste del tono de referencia se guarda automáticamente, por lo
que no es necesario configurarlo cada vez que realice un ajuste.
El tono de referencia ha sido ajustado a 40 (440 Hz) en fábrica.
9
ME-25_s.book 10 ページ 2014年9月24日 水曜日 午前11時25分
Funciones prácticas
5. 5. APUNTE
3.
En el caso de grabaciones extremadamente breves, es posible que se
oiga un sonido oscilante.
4. Para superponer grabaciones adicionales
4.
(mezcla), repita los Pasos 2 y 3 (OVERDUB).
OVERDUB PLAY
CONSEJO
Indicador de
pedal SOLO Puede cambiar de memoria incluso durante la reproducción en bucle
4. de frase, lo que permite grabar distintos sonidos mezclados.
Encendido
Off 5. Para detener la reproducción del bucle, pise el
pedal SOLO dos veces rápidamente (STANDBY).
La grabación/reproducción del bucle se interrumpe y la función
de bucle de frase vuelve al estado de espera de grabación.
APUNTE
Pise dos veces el pedal en el lapso de un segundo.
Una vez concluida la reproducción, los datos grabados se borrarán.
3. Pulse [WRITE].
De este modo, el ajuste quedará almacenado en la memoria.
10
ME-25_s.book 11 ページ 2014年9月24日 水曜日 午前11時25分
Funciones prácticas
English
documento Readme incluido en el archivo descargado.
Deutsch
Ajuste el volumen Envío y recepción de
mediante el software señales de audio
Français
Utilice el software del ordenador para ajustar el nivel de la entrada de señal a través del USB (no se puede ajustar en el propio ME-25).
Italiano
Para ajustar el volumen de una guitarra, utilice el pedal de expresión o ajuste otros parámetros relacionados con el volumen.
Para controlar la entrada de sonido, primero baje el volumen totalmente mediante el software del ordenador. A continuación, suba gradualmente el
nivel hasta que consiga el volumen deseado.
APUNTE
Cuando el ME-25 está conectado a un ordenador, el simulador de amplificador de guitarra integrado se enciende.
La señal que entra mediante AUX IN no sale utilizando el USB.
Español
Português
Nederlands
11
ME-25_s.book 12 ページ 2014年9月24日 水曜日 午前11時25分
Apéndices
5. Pulse [WRITE].
De este modo, el ajuste quedará guardado en la memoria.
Flujo de señal
EFFECT
PEDAL FX COMP/FX OD/DS PREAMP USB USB AUX IN
INPUT OUT IN
USB PHONES
NOISE VOLUME
(PEDAL) MODULATION DELAY REVERB
SUPPRESSOR OUTPUT
* Esencialmente, los efectos están conectados en el orden que se muestra más arriba. No obstante, este orden se puede cambiar automáticamente para
optimizar el orden de conexión y dar cabida a ajustes concretos.
12
ME-25_s.book 13 ページ 2014年9月24日 水曜日 午前11時25分
UTILIZACIÓN SEGURA DE
English
ADVERTENCIA ADVERTENCIA PRECAUCIÓN
un paño o papel suave para secar
por completo el compartimento de
las pilas. A continuación, ponga pilas
002c 011
• No abra, ni modifique de • Evite la entrada de todo tipo 101b
• La unidad y el adaptador de nuevas. Para evitar posibles lesiones
ninguna forma, la unidad ni de objetos (monedas, agujas) CA deben colocarse en un en la piel, no toque el líquido proce-
su adaptador de CA. y líquidos (agua, bebidas, lugar y una posición que dente de la pila con las manos, ni
materiales inflamables, etc.) al deje que entre en contacto con la
...................................................................................... permitan una ventilación piel. Ponga extremo cuidado para
003 interior de la unidad.
• No intente reparar la unidad ni adecuada. que el líquido no entre en contacto
sustituir ninguna de sus piezas ...................................................................................... con los ojos. Si el líquido ha entrado
102d en contacto con los ojos, láveselos
internas (salvo cuando en este • Siempre que vaya a enchufar
manual se proporcionen ..................................................................................... inmediatamente con agua
012c o desenchufar el adaptador abundante.
Deutsch
instrucciones específicas que le indiquen • Apague la unidad inmediata- de CA en/de una toma de 6
que lo haga). Siempre que tenga que mente, extraiga el adaptador corriente o la unidad, hágalo • No guarde nunca las pilas con
realizar algún tipo de reparación, póngase de CA del enchufe y póngase aferrando solamente el enchufe del objetos metálicos como bolígrafos,
en contacto con su proveedor, el centro en contacto con su cable del adaptador. horquillas, collares, etc.
de servicio Roland, o con un distribuidor proveedor, el centro de servicio Roland ...................................................................................... ......................................................................................
Roland autorizado de los que se indican más cercano, o con un distribuidor 103b 112
en la página de “información”. Roland autorizado de los que se indican • Desenchufe el adaptador de • El vertido de las pilas deberá
...................................................................................... en la página de “información”, siempre CA periódicamente y límpielo ajustarse a la normativa
004
• Nunca instale la unidad en las que: con un paño seco para vigente en su lugar de
siguientes ubicaciones. • El adaptador de CA o el cable de eliminar el polvo y la residencia.
• Expuestas a temperaturas alimentación estén dañados; suciedad de las patillas. Asimismo, ......................................................................................
118a
extremas (por ejemplo, • La unidad genere humo u olores desenchufe el cable de alimentación de • Si extrae la tapa del conector
Français
bajo la luz directa del sol raros; la toma de corriente siempre que la
en un vehículo cerrado, USB, guárdela en un lugar
• Haya caído algún objeto, o se haya unidad no vaya a utilizarse en un seguro fuera del alcance de
cerca de un conducto de derramado algún líquido, en el periodo de tiempo prolongado. La
calefacción, encima de interior de la unidad; los niños, para que no haya
acumulación de polvo entre el enchufe posibilidad alguna de que lo traguen
algún equipo que genere calor, etc.). • La unidad haya estado expuesta a la del cable de alimentación y la toma de
• Mojadas (por ejemplo, cuartos de lluvia, o se haya mojado por accidentalmente.
baño o suelos mojados); ni corriente puede reducir el aislamiento y ......................................................................................
cualquier causa; provocar un incendio.
• Expuestas al vapor o a humos; • La unidad no funcione normalmente
• Expuestas a entornos salinos; ......................................................................................
o muestre cambios notables de 104
• Húmedas; rendimiento. • Trate de evitar que los cables
• Expuestas a la lluvia; .....................................................................................
013 se enreden. Además, todos
• Polvorientas o arenosas; • En lugares en que haya niños los cables deben estar fuera
• Expuestas a altos niveles de vibra- debe haber siempre un del alcance de los niños.
Italiano
ciones y sacudidas. adulto presente hasta que los ......................................................................................
......................................................................................
007 niños puedan observar todas 106
• Asegúrese de que la unidad las reglas de seguridad esenciales de la • No se suba a la unidad ni
esté siempre colocada sobre unidad. coloque objetos pesados
una superficie plana, nivelada ..................................................................................... sobre la misma.
y estable. Nunca la coloque 014
sobre soportes que puedan moverse ni • Proteja la unidad contra ......................................................................................
sobre superficies inclinadas. golpes. 107d
...................................................................................... (No la deje caer) • Nunca toque el adaptador de
008b
CA ni sus enchufes con las
• Utilice exclusivamente el .....................................................................................
015 manos mojadas al enchu-
adaptador de CA especificado • No enchufe el cable de farlo o desenchufarlo en/de
(serie PSA), y asegúrese de que alimentación de la unidad a
Español
una toma de corriente o la unidad.
el voltaje de la línea de alimen- una toma de corriente que ......................................................................................
tación es la misma que el voltaje de utilicen ya demasiados dispo- 108b
entrada indicada en el adaptador de CA. sitivos. Tenga mucho cuidado si utiliza • Antes de mover la unidad,
Otros adaptadores de CA pueden usar cables de extensión. La corriente total desconecte el adaptador de
una polaridad distinta o estar diseñados de todos los dispositivos conectados a CA y todos los cables proce-
para otros voltajes, por lo que su uso la toma del cable de extensión no debe dentes de dispositivos
podría provocar daños, deficiencias de exceder nunca la clasificación de la externos.
funcionamiento o descargas eléctricas. corriente (vatios/amperios) del cable. ......................................................................................
......................................................................................
009 Una carga excesiva podría provocar que 109b
• No doble ni retuerza excesi- • Antes de limpiar la unidad,
el material de aislamiento del cable se apáguela y desenchufe el
vamente el cable de alimen- recaliente, e incluso que se funda.
Português
13
ME-25_s.book 14 ページ 2014年9月24日 水曜日 午前11時25分
NOTAS IMPORTANTES
Fuente de alimentación: 354a
• No exponga la unidad a la luz directa Otras precauciones Derechos de autor/Licencia/
uso de pilas del sol, no la ponga cerca de aparatos
que emitan calor, no la deje dentro de
551
• Tenga en cuenta que el contenido de la Marcas comerciales
301
un vehículo cerrado, ni la someta a memoria podría perderse irremediable- 853
• No conecte la unidad a la misma toma mente como consecuencia de • No use esta unidad con fines que
temperaturas elevadas. El calor elevado
de corriente que un aparato eléctrico deficiencias de funcionamiento de la pudieran incumplir las leyes de
puede deformar o decolorar la unidad.
controlado por un inversor (como un 355b unidad. Para proteger los datos más derechos de autor. Declinamos toda
frigorífico, una lavadora, un micro- • Si traslada la unidad desde un lugar a importantes contra posibles pérdidas, responsabilidad por cualquier infrac-
ondas o un aparato de aire acondi- otro cuyas condiciones de temperatura se recomienda realizar copias de ción de los derechos de autor de
cionado), o que tenga un motor. o humedad son muy diferentes, existe seguridad periódicas de los datos terceros derivada del uso que se haga
Dependiendo de cómo se utilice dicho la posibilidad de que se forme conden- almacenados en la memoria de la de esta unidad.
aparato eléctrico, el ruido de la fuente sación en el interior. Si intenta hacer unidad en un equipo.
de alimentación puede provocar • MMP (Moore Microprocessor Portfolio)
funcionar la unidad en estas condi- 552
se refiere a una cartera de patentes
deficiencias de funcionamiento en la ciones podría dañarse o presentar • Lamentablemente, podría no ser
unidad o generar ruidos perceptibles. Si posible restaurar el contenido de los relacionada con la arquitectura de los
deficiencias de funcionamiento. Por lo microprocesadores, desarrollada por
no existe la posibilidad de usar otra tanto, antes de utilizar la unidad, deber datos almacenados en la memoria de la
toma de corriente, conecte un filtro de unidad o en el equipo una vez que se Technology Properties Limited (TPL).
dejarla reposar varias horas hasta que la Roland dispone de licencia para esta
ruido de fuente de alimentación entre condensación se haya evaporado por hayan perdido. BOSS/Roland Corpo-
la unidad y la toma de corriente. ration no asume responsabilidad tecnología de TPL Group.
completo.
302 360 alguna por la pérdida de datos. • Roland, BOSS y COSM son marcas
• El adaptador de CA empezará a calen- • Dependiendo del material y la tempe- 553
tarse después de varias horas de uso • Utilice los botones, mandos, enchufes y comerciales registradas o marcas
ratura de la superficie sobre la que comerciales de Roland Corporation en
continuado. Esto es algo normal y no coloque la unidad, las patas de goma conectores de la unidad con los
tiene consecuencias. cuidados necesarios. Una utilización Estados Unidos y/u otros países.
que tiene podrían manchar o descolorar
303a
su superficie. incorrecta puede provocar deficiencias • Los nombres de todos los productos
• Si va a utilizar el ME-25 por un periodo de funcionamiento.
prolongado, le recomendamos que Para evitarlo, coloque un paño o fieltro mencionados en este documento son
556
utilice un adaptador de CA. Si prefiere debajo de las patas. En tal caso, asegú- • Siempre que enchufe o desenchufe marcas comerciales o registradas de sus
utilizar una pila, le recomendamos una rese de que la unidad no pueda algún cable, sujete el enchufe y no tire respectivos titulares.
alcalina. moverse ni caerse accidentalmente. nunca del cable. Así evitará cortocir-
304b cuitos o daños a los elementos internos
• Las pilas siempre deben instalarse o Convenciones e iconos
sustituirse antes de conectar cualquier Mantenimiento del cable.
otro dispositivo. De esta forma evitará 401a
558a
• Para evitar molestias a terceros, de este manual
deficiencias de funcionamiento o daños • Limpie la unidad diariamente con una mantenga el volumen de la unidad en
a los altavoces y otros dispositivos. paño suave y seco, o ligeramente un nivel razonable. También puede Texto o números Indica botones.
306b humedecido en agua. Para eliminar la optar por el uso de auriculares, especial- [WRITE] botón WRITE
• La unidad incluye las pilas. No obstante, suciedad resistente, utilice un paño y un encerrados entre
mente por la noche.
la vida útil de las pilas puede ser detergente no abrasivo y suave. A conti- 559a corchetes [ ]
limitada, ya que su finalidad principal es nuación, no olvide secar la unidad total- • Cuando tenga que transportar la
permitir la realización de pruebas. mente con un paño suave y seco. unidad, en la medida de lo posible Indica información
307 402 embálela dentro de su caja original que debe tomar en
• Antes de conectar la unidad a otros • No utilice aguarrás, alcohol ni disol- (incluido el material de relleno). De lo cuenta al utilizar el
dispositivos, apáguelos. Esto contribuirá ventes de ningún tipo para evitar que la contrario, utilice materiales de embalaje ME-25.
a evitar deficiencias de funcionamiento unidad se deforme o descolore. adecuados.
o daños en los altavoces y otros disposi- 562 Indica información
tivos. • Algunos cables de conexión incorporan APUNTE complementaria
Reparaciones y datos resistencias. No utilice cables con resis- acerca de una
operación.
tencias para conectar esta unidad. Este
Ubicación 452
• Tenga en cuenta que todos los datos tipo de cables puede provocar que el
Indica información
351 que se encuentran en la memoria nivel de sonido sea extremadamente
• El uso de la unidad en las proximidades bajo o inaudible. Para obtener informa- CONSEJO acerca de una
pueden perderse si entrega la unidad
de amplificadores de potencia (u otros para repararla. Se debe guardar una ción sobre las especificaciones de un operación
equipos con grandes transformadores copia de seguridad de los datos impor- cable, póngase en contacto con el fabri- conveniente.
de potencia) puede producir zumbidos. tantes en un equipo, o escribirlos en cante.
Para mitigar este problema, cambie la Indica una página de
papel (si es posible). Durante las repara- referencia.
orientación de la unidad o aléjela de la ciones se adoptan las medidas
fuente de la interferencia. adecuadas para evitar la pérdida de (pág. **)
352a
datos. Con todo, en algunos casos (por
• Este dispositivo puede interferir en la ejemplo, cuando no funcionan los
recepción de radio o televisión. No circuitos relacionados con la memoria),
utilice la unidad en las proximidades de lamentamos informar de que podría no
este tipo de receptores.
352b ser posible restaurar los datos. Roland
• La utilización de dispositivos de no asume responsabilidad alguna por
comunicación inalámbricos, como dichas pérdidas de datos.
teléfonos móviles, en las proximidades
de la unidad puede originar ruidos.
Estos ruidos pueden producirse al
recibir o hacer una llamada, o durante la
conversación. Si observa este problema,
debe alejar el dispositivo inalámbrico
de la unidad o apagarlo.
Especificaciones principales
ME-25: Efectos múltiples de guitarra Nivel de salida -10 dBu Dimensiones 300 (An) x 191 (F) x 72 (Al) mm
nominal 11-13/16 (An) x 7-9/16 (F) x 2-7/8 (Al)
Conversión 24 bits + método AF pulgadas
AD * Método AF (método Adaptive Focus) Impedancia 2000 ohmios
Es un método patentado de Roland & de salida Altura máxima:
BOSS que mejora significativamente 300 (An) x 191 (F) x 93 (Al) mm
la relación señal-ruido (S/N) de los Pantalla LED de 7 segmentos y 2 dígitos 11-13/16 (An) x 7-9/16 (F) x 3-11/16 (Al)
convertidores A/D y D/A. Fuente de 9 V CC pulgadas
Conversión 24 bits alimentación 6 pilas secas (tipo R6/LR6 (AA)) Peso 1,9 kg, 4 lbs 4 oz (incluidas las pilas)
DA Adaptador de CA Accesorios Manual de instrucciones
Frecuencia de 44,1 kHz (BOSS serie PSA: venta por separado) Lista de biblioteca de sonidos/Memoria
muestreo Consumo 150 mA (folleto)
Pegatina de biblioteca de sonidos
Memoria 60 eléctrico Pilas secas (alcalinas: tipo LR6 (AA)) x 6
Nivel de INPUT: -10 dBu Duración Alcalina: 9 horas Servicio Roland (ficha técnica)
prevista de las De carbono: 3 horas
entrada no AUX IN: -18 dBu (Estas cifras pueden variar en función de Opciones Adaptador de CA: BOSS serie PSA
minal pilas con un
las condiciones de uso reales.) * 0 dBu = 0,775 Vrms
uso continuo
Impedancia INPUT: 1 M ohmios * Con el fin de mejorar el producto, las especificaciones y/
de entrada o el aspecto de la unidad pueden modificarse sin previo
AUX IN: 22.000 ohmios aviso.
14
ME-25_p.book 1 ページ 2014年9月24日 水曜日 午前11時27分
Manual do Proprietário
Antes de usar este equipamento, leia com atenção as seguintes seções: “USO SEGURO DO EQUIPAMENTO” (pág. 13) e
“OBSERVAÇÕES IMPORTANTES” (pág. 14).
Essas seções fornecem informações importantes sobre o uso correto do equipamento. Além disso, para que você
English
conheça todos os recursos do seu novo equipamento, este manual deve ser lido na íntegra. O manual deverá ser
guardado em local de fácil acesso para consultas futuras.
Deutsch
Conectando e ligando o equipamento ......... 2
Recursos principais Vamos Tocar!................................................... 3
Diversos algoritmos realísticos de
Usando a Biblioteca de Timbres .................... 4
simulação de pre-amplificador
usando COSM Salvando sons (gravação de memória) ......... 4
Français
Este aparelho está equipado com um conjunto Fazendo ajustes detalhados dos efeitos
variado de amplificadores COSM (dez tipos), que
cobrem desde timbres limpos até timbres de alto (modo de edição) ............................................ 5
ganho. Ajustando o supressor de ruídos..................................................5
Graças à Biblioteca de timbres, você Guia de efeitos.............................................................................6
pode obter o timbre ideal quando COMP/FX (compressor/efeitos) ....................................................6
Italiano
precisar dele OD/DS (overdrive/distorção) .........................................................6
PREAMP .................................................................................................6
Para obter o timbre ideal, basta selecionar uma
categoria e uma variação. MODULATION .....................................................................................7
DELAY.....................................................................................................7
Recurso Super Stack
REVERB...................................................................................................8
Você pode obter o poderoso som de um grande
PEDAL FX (efeitos do pedal de expressão) ...............................8
amplificador valvulado do tipo cabeça e caixa
com o simples pressionar de um botão. Funções práticas ............................................. 9 Español
Recurso de reprodução contínua de Afinando a guitarra/violão (afinador) .................................9
frase musical Reprodução contínua de frase musical (Phrase Loop).... 10
Você pode gravar e reproduzir frases com até 38
segundos de duração. Verificando os valores dos controles................................ 10
Pode ser ligado a um PC via USB Fazendo os ajustes da operação dos knobs .................. 10
Português
Você pode usar a Digital Audio Workstations Conexão com o computador via USB .............................. 11
(DAW) para realizar a gravação e importar novos Instalando o driver USB ................................................................ 11
sons. Usando a Digital Audio Workstations (DAW)........................ 11
Apêndices ...................................................... 12
Restaurando os ajustes de fábrica (factory reset)........ 12
Sobre o “COSM”
Nederlands
Etapa
4 OBSERVAÇÃO
Guitarra Não se esqueça de usar um
elétrica
Ligue o amplificador no máximo!
Amplificador
de guitarra/violão
Etapa
2 Adaptador CA série PSA
(vendido separadamente)
Conecte o equipamento
Etapa
3 no plugue OUTPUT.
Conecte um cabo de
Insira o plugue no conector segurança contra roubo à
INPUT para ligar o ME-25. venda no site abaixo:
http://www.kensington.com/
2
ME-25_p.book 3 ページ 2014年9月24日 水曜日 午前11時27分
Vamos Tocar!
Depois de concluir as conexões, tente tocar alguns sons enquanto usa a ME-25.
English
ativa a função de afinação.
Apagado: O pedal controla o volume.
O que é memória? Aceso: O pedal controla os efeitos
O grupo de ajustes de efeito é denominado variados.
“memória”. A ME-25 tem 60 memórias. Ref. Para obter mais informações sobre os efeitos do pedal de expressão,
leia “PEDAL FX (efeitos do pedal de expressão)” (pág. 8).
Deutsch
Visor Usando o Super Stack
O som selecionado Ele permite que você obtenha
no momento
o poderoso som de um grande
(memória) e outras
amplificador valvulado do tipo
informações
aparecem aqui. cabeça e caixa mesmo quando
você tocar com um
Français
amplificador pequeno.
Quando pressionado, este
botão alternará para o Super
Stack e acenderá a luz do
indicador SUPER STACK.
Italiano
Mudando para timbres de solo Ajustando o volume e a qualidade do timbre
Permite mudar para timbres ideais para solo. Botão DRIVE
Quando pressionado, este pedal alternará para SOLO e Ajusta a distorção do pré-amplificador.
Botão TONE
acenderá a luz do indicador do pedal. Ajusta o timbre do pré-amplificador.
Botão VOLUME Español
Gire o botão VOLUME enquanto SOLO está ativado para ajustar o Ajusta o volume do pré-amplificador.
volume do solo desejado.
* Não pode ser ajustado no modo de Edição (pág. 5). Os botões serão desativados quando o pré-amplificador
Reprodução contínua de frase musical (Phrase Loop) estiver desligado. Para verificar se o pré-amplificador está
ligado ou não, vá ao modo de Edição (pág. 5).
Quando você pressiona este pedal durante dois segundos DICA
Português
ou mais, ativa o recurso Phrase Loop. Você pode salvar os valores ajustados.
Ref. “Reprodução contínua de frase musical” (Phrase Loop) (pág. 10) Ref. “Salvando sons (gravação de memória)” (pág. 4)
DICA
Em caso de problemas inesperados como, por exemplo, a ausência de sons produzidos, verifique o seguinte.
Nederlands
3
ME-25_p.book 4 ページ 2014年9月24日 水曜日 午前11時27分
Ref.
Para obter informações sobre os sons da Biblioteca de Timbres, leia a lista separada da Biblioteca de Timbres.
DICA
Ao salvar os sons na memória, será útil colocá-los na ordem em que
pretende utilizá-los na apresentação.
4
ME-25_p.book 5 ページ 2014年9月24日 水曜日 午前11時27分
No modo de edição, você pode fazer ajustes detalhados para todos 1. Mantenha [EXIT] pressionado e pressione
os efeitos.
[WRITE].
2 “Ed” é exibido no visor e a operação é alternada para o modo
de edição.
1 5 3 4 2. Escolha o efeito para o qual você deseja fazer
ajustes.
O indicador do efeito selecionado pisca.
DICA
English
Para selecionar PEDAL FX, pressione com firmeza a parte frontal do
pedal de expressão até acender o indicador PEDAL FX.
Ref.
Para obter mais informações sobre cada efeito, leia “Guia de efeitos”
Os indicadores mostram os estados descritos a seguir.
(pág. 6).
Deutsch
Ao ser pressionado, o botão muda de estado.
Exemplo: COMP/FX 3. Escolha o tipo de efeito.
Efeito desativado Efeito ativado Ajuste de efeito
Français
5. Pressione [EXIT].
Isso encerra o modo de edição.
No modo de edição, a função exibida em itálico está ativada. 6. Se você deseja salvar os ajustes feitos, realize
Exemplo: o botão CLEAN. o procedimento de gravação de memória
(pág. 4).
Italiano
OBSERVAÇÃO
Desligar a energia ou trocar as memórias antes de realizar a operação
Funciona como um botão para o efeito COMP/FX.
de gravação de memória, causará a perda de todos os sons criados.
5
ME-25_p.book 6 ページ 2014年9月24日 水曜日 午前11時27分
Guia de efeitos
Todos os nomes de produto mencionados neste documento são marcas comerciais ou marcas comerciais registradas de seus
respectivos proprietários.
Essas empresas não são afiliadas da BOSS e não licenciaram ou autorizaram a ME-25 da BOSS. As marcas são usadas exclusivamente para
identificar o equipamento cujo som é simulado pela ME-25 da BOSS.
COMP/FX (compressor/efeitos)
Produz um efeito que sustenta o som sem distorcer o mesmo.
Explicação
1: COMP Produz um efeito que sustenta o som SUSTAIN: ATTACK: LEVEL:
sem distorcer o mesmo. Ajusta a sustentação do som. Ajusta o ataque (subida) do Define o volume do efeito.
som do efeito.
2: T.WAH Produz um efeito wah-wah SENS: TONE: PEAK:
correspondente à intensidade da Define a sensibilidade da Ajusta a equalização do efeito Ajusta a intensidade do som com
palhetada. resposta ao som de entrada. wah-wah. efeito wah-wah.
3: AC SIM Transforma o timbre da guitarra em LOW: HIGH: LEVEL:
timbre de violão acústico. Ajusta os graves do efeito. Ajusta os agudos do efeito. Define o volume do efeito.
OD/DS (overdrive/distorção)
Esses efeitos adicionam distorção e sustain diferenciados.
Explicação
1: BOOST Trata-se de um reforço de ganho. Ele funciona muito bem para a DRIVE: TONE: LEVEL:
criação de distorção com um pré-amplificador COSM ou para a Ajusta a intensidade Ajusta a equalização Ajusta o volume de
criação de timbres limpos de impacto quando usado sozinho. da distorção. do som. OD/DS.
2: OD-1 O timbre natural do BOSS OD-1. Ele produz uma distorção suave.
3: T-SCREAM Simula um Ibanez TS-808.
4: BLUES Trata-se de um efeito overdrive único que reproduz fielmente as
nuances da palhetada.
5: DIST É uma distorção nítida com ótima sustentação do som.
6: CLASSIC Timbre de um sistema vintage de cabeçote mais caixa de som.
7: MODERN Timbre de um amplificador grande com muito ganho.
8: METAL Distorção que enfatiza as freqüências médias.
9: CORE Distorção que corta as freqüências médias.
10: FUZZ Distorção sólida, pesada e única.
PREAMP
Simula a resposta de pré-amplificadores variados.
Explicação
1: CLEAN Trata-se de um som limpo, suave e quente. DRIVE: TONE: VOLUME:
2: TWIN Simula um Fender Twin Reverb. Ajusta a intensidade de Ajusta a qualidade Ajusta o volume
distorção do pré- tonal do pré- do pré-amplificador.
3: TWEED É um timbre com efeito crunch de Fender Bassman. amplificador. amplificador.
4: VO DRIVE É um timbre com efeito crunch, semelhante ao de um
amplificador VOX.
5: BG LEAD É um timbre de solo do amplificador Mesa/Boogie.
6: MS VINTAGE Tem um timbre semelhante ao dos amplificadores Marshall
dos anos 70. Você pode ajustar os seguintes parâmetros enquanto o indicador
7: MS MODERN Simula o timbre de alto ganho dos amplificadores Marshall [DRIVE (PREAMP)] está piscando rapidamente.
mais recentes. Mantendo [DRIVE (PREAMP)] pressionado até que “Ed” comece a piscar
8: 5150 DRIVE Timbre do canal LEAD de um Peavey EVH 5150. no monitor, faz com que o indicador em [DRIVE (PREAMP)] pisque
rapidamente.
9: R-FIER Simula um Mesa/Boogie Dual Rectifier. Quando você pressionar [DRIVE (PREAMP)] novamente, o ME-25
10: ULTRA METAL Trata-se de um amplificador para heavy metal, original e voltará ao estado normal.
com design exclusivo, que produz timbres de contorno
distinto juntamente com graves encorpados e distorção
pesada. BASS: MIDDLE: TREBLE:
É ideal para tocar qualquer tipo de metal, incluindo riffs
complexos e intensos, riffs pesados encorpados em Equaliza os graves. Equaliza os médios. Equaliza os agudos.
afinação rebaixada, solos rápidos e muito mais.
6
ME-25_p.book 7 ページ 2014年9月24日 水曜日 午前11時27分
MODULATION
Esses efeitos ampliam, modulam e/ou alteram a afinação do som.
Explicação
1: CHORUS Esse efeito adiciona um pouco de RATE: DEPTH: E.LEVEL:
oscilação para tornar o timbre mais Define a velocidade do efeito. Define a profundidade do efeito. Define o volume do
amplo, encorpado e bonito. efeito.
2: PHASER Esse efeito cria um som amplo com RATE: DEPTH: RESONANCE:
mudança de fases. Define a velocidade do efeito. Define a profundidade do efeito. Define a intensidade do
efeito.
3: FLANGER Cria um efeito de modulação similar RATE: DEPTH: RESONANCE:
aumento e a diminuição do som da Define a velocidade do efeito. Define a profundidade do efeito. Define a intensidade do
turbina de um jato. efeito.
4: ROTARY Esse efeito produz o som de alto- RATE: DEPTH: E.LEVEL:
English
falantes giratórios. Define a velocidade do efeito. Define a profundidade do efeito. Define o volume do
efeito.
5: UNI-V Simula o Uni-Vibe, efeito que faz RATE: DEPTH: E.LEVEL:
parte do som do rock dos anos 60. Define a velocidade do efeito. Define a profundidade do efeito. Define o volume do
efeito.
6: TREMOLO Produz um efeito vintage por meio RATE: DEPTH: E.LEVEL:
de alterações cíclicas no nível do Define a velocidade do efeito. Define a profundidade do efeito. Define o volume do
volume.
Deutsch
efeito.
7: HARMONIST Cria harmonias que lembram KEY: HARMONY: E.LEVEL:
guitarras/violões em dueto. Ajusta a tonalidade da música. Ajusta a altura da harmonia. Define o volume do
* Toque apenas uma nota de cada Por exemplo: efeito.
vez ao usar o efeito HARMONIST.
Français
uma oitava abaixo. Ajusta o nível de volume do som Ajusta o volume do
* Toque apenas uma nota de cada direto. efeito.
vez ao usar o efeito de oitava.
DELAY
Retarda o som para produzir um efeito semelhante ao de um eco. Isso lhe permite encorpar e criar sons complexos.
Explicação
Italiano
1: 1-99 ms Trata-se de um delay entre 1 e 99 TIME: FEEDBACK: E.LEVEL:
ms (milissegundos), ideal para Ajusta o tempo de delay em gradações de 1 ms. Define o número de Ajusta o volume do som
um efeito de dobra. Por exemplo: repetições do som com com delay.
2ms 99ms delay.
2: 100-990 ms Esse delay tem entre 100 e 990 TIME: FEEDBACK: E.LEVEL:
ms (milissegundos). Ajusta o tempo de delay em gradações de 10 ms. Define o número de Ajusta o volume do som
Por exemplo: repetições do som com com delay.
120ms 990ms delay. Español
Quando TAP está selecionado, você pode ajustar o ritmo dos delays como Sincronização
colcheias pontuadas ou semimínimas, pressionando o pedal SOLO duas ou
mais vezes em sincronia com o ritmo da música.
O indicador do pedal SOLO pisca em sincronia com o ritmo atual. Som de delay
Ajuste TIME
7
ME-25_p.book 8 ページ 2014年9月24日 水曜日 午前11時27分
REVERB
Adiciona reverberações ao som.
Explicação
1: ROOM Simula reverberações típicas de uma sala. - - LEVEL:
2: HALL Simula reverberações típicas de um salão. Ele define o nível de
volume do efeito.
Ref.
Para obter mais informações sobre como usar os efeitos do pedal, leia Usando os efeitos do pedal pág. 3.
Explicação
1: WAH Trata-se de um efeito wah-wah. - - -
2: +1 OCTAVE Permite a variação contínua da altura até uma oitava
acima ou abaixo do som original.
3: -1 OCTAVE * Toque apenas uma nota de cada vez ao usar os efeitos
OCTAVE.
4: FREEZE Permite sustentar o som usando o pedal de expressão.
Use-o para manter o acorde enquanto toca uma linha
melódica.
Usando o FREEZE
1. Pressione a parte traseira do pedal de expressão.
2. Toque a guitarra e enquanto o som é reproduzido, pressione a parte frontal do pedal de
expressão.
O som será sustentado enquanto você mantiver o pedal pressionado.
* Você pode ajustar o volume do som sustentado alterando a posição do pedal.
3. Para interromper o som sustentado, pressione a parte frontal do pedal de expressão.
8
ME-25_p.book 9 ページ 2014年9月24日 水曜日 午前11時27分
Funções práticas
English
Muito baixo Afinado Muito alto
(pisca rapidamente) (pisca rapidamente)
Deutsch
mesmo tempo.
O modo tuner é desativado.
Français
mesmo tempo. É possível usar o pedal de expressão para controlar o volume.
O modo tuner é ativado.
2. Se necessário, ajuste a freqüencia de
referência.
Você pode alterar a freqüencia de referência mantendo
pressionado [EXIT] e pressionando os pedais MEMORY /
Italiano
.
Monitor freqüencia
35–45 435–445 [Hz]
9
ME-25_p.book 10 ページ 2014年9月24日 水曜日 午前11時27分
Funções práticas
3. Pressione [WRITE].
O ajuste é armazenado na memória.
10
ME-25_p.book 11 ページ 2014年9月24日 水曜日 午前11時27分
Funções práticas
English
“Readme” incluso no arquivo baixado.
Deutsch
Enviando e
recebendo sinais
Ajuste o volume de áudio
Français
com o software
OBSERVAÇÃO
Italiano
Use o software do computador para ajustar o nível do sinal de entrada via USB (não é possível ajustá-lo na própria ME-25).
Para ajustar o volume de um violão/guitarra, use o pedal de expressão ou ajuste outros parâmetros relacionados ao volume.
Para monitorar o som da entrada, primeiro baixe todo o volume utilizando o software do computador. Depois aumente gradualmente o nível até
alcançar o nível de volume desejado.
Quando a ME-25 está conectado ao computador, o simulador de amplificador de guitarra interno está ativado.
O sinal na entrada AUX IN não é replicado na saída quando se utiliza USB. Español
Português
Nederlands
11
ME-25_p.book 12 ページ 2014年9月24日 水曜日 午前11時27分
Apêndices
Fluxo do sinal
EFFECT
PEDAL FX COMP/FX OD/DS PREAMP USB USB AUX IN
INPUT OUT IN
USB PHONES
NOISE VOLUME
(PEDAL) MODULATION DELAY REVERB
SUPPRESSOR OUTPUT
* Basicamente, os efeitos são conectados na seqüência mostrada acima. Mas essa sequência poderá mudar automaticamente para otimizar a seqüência de
conexões e atender a configurações específicas.
12
ME-25_p.book 13 ページ 2014年9月24日 水曜日 午前11時27分
USO SEGURO DO
English
toalha de papel para limpar todos os
002c 011 101b resíduos do vazamento do compar-
• Não abra (ou faça qualquer • Não permita que qualquer • O equipamento e o timento de pilhas. Em seguida,
modificação) no equipa- objeto (por exemplo, adaptador CA devem ser coloque pilhas novas. Para evitar
mento ou no adaptador CA. materiais inflamáveis, colocados em um local ou inflamação da pele, verifique se o
moedas, pinos) ou qualquer posição que não interfira na vazamento da pilha não encostou
......................................................................................
003 tipo de líquido (água, refrige- ventilação adequada. nas suas mãos ou na sua pele. Tenha
• Não tente fazer reparos ou rantes etc.) penetrem no ...................................................................................... muito cuidado para que esse
substituir peças no equipa- equipamento. 102d
vazamento não se aproxime dos
mento (exceto quando • Segure sempre apenas o seus olhos. Lave imediatamente a
..................................................................................... plugue de saída do corpo do
indicado especificamente 012c área afetada com água corrente,
pelas instruções deste manual). Procure • Desligue imediatamente, tire adaptador CA ao colocar ou caso o vazamento tenha entrado
Deutsch
o vendedor, o Centro de Técnico da o adaptador CA da tomada e ao tirar esse equipamento de nos seus olhos.
Roland ou um distribuidor autorizado procure o seu vendedor, o uma tomada. 6
da Roland, conforme listado da página Centro de Técnico da Roland ...................................................................................... • Nunca deixe as pilhas com objetos
103b
“Informações”. ou um distribuidor autorizado da • Em intervalos regulares, metálicos como, por exemplo,
...................................................................................... Roland, conforme listado na página desligue o adaptador CA e canetas esferográficas, colares,
004 “Informações” quando: limpe-o com um pano seco grampos de cabelo etc.
• Jamais instale o equipamento • O adaptador CA ou o cabo de força ......................................................................................
em qualquer um dos locais a para limpar toda a poeira e 112
estiverem danificados ou outros acúmulos dos contatos. Além
seguir. • As pilhas usadas devem ser
• Houver fumaça ou odores fora do disso, desconecte o cabo de força da descartadas em confor-
• Sujeitos a temperaturas comum tomada sempre que o equipamento
extremas (por exemplo, midade com todas as normas
• Objetos caírem ou for derramado permanecer sem uso por períodos de segurança de descarte da
luz solar direta em
Français
líquido em cima do equipamento ou prolongados. Qualquer acúmulo de região em que você vive.
veículos fechados, poeira entre o plugue e a tomada pode
próximo a um aquecedor, • O equipamento tiver sido exposto à ......................................................................................
chuva (ou molhado) ou resultar em deficiência no isolamento e 118a
em cima de um equipamento que causar um incêndio. • Caso remova a tampa do
gera calor) ou • O equipamento não funcionar
normalmente ou funcionar de forma ...................................................................................... conector USB, guarde-a em
• Molhados (por exemplo, banheiros, 104 local seguro fora do alcance
lavatórios ou pisos molhados) ou diferente. • Tente evitar que fios e cabos
..................................................................................... das crianças para que elas
• Expostos ao vapor ou à fumaça ou fiquem enrolados. Além não corram o risco de engoli-la aciden-
013
• Sujeitos à exposição ao sal ou • Em casas com crianças disso, todos os fios e cabos talmente.
pequenas, um adulto deve devem ser colocados em ......................................................................................
• Úmidos ou locais fora do alcance de crianças.
• Expostos à chuva ou supervisionar até que a
criança seja capaz de seguir ......................................................................................
• Empoeirados ou com areia ou 106
Italiano
as principais regras para o uso seguro • Nunca suba ou coloque
• Sujeitos a altos níveis de vibração e do equipamento.
instabilidade. objetos pesados em cima do
..................................................................................... equipamento.
...................................................................................... 014
007 • Proteja a unidade de fortes ......................................................................................
• Sempre verifique se o equipa- impactos. 107d
mento está sobre superfícies (Não a deixe cair!) • Nunca manuseie o corpo do
planas e estáveis. Nunca o adaptador CA ou seus
deixe em suportes que ..................................................................................... plugues de saída com as
015
possam tombar ou em superfícies incli- mãos molhadas ao ligar e ao
• Não force o cabo de força
nadas. desligar esse equipamento da tomada.
para compartilhar uma
...................................................................................... ......................................................................................
008b tomada com vários outros 108b
Español
• Use somente o adaptador CA aparelhos. Tenha um cuidado • Antes de mover o equipa-
(série PSA) especificado e especial ao usar extensões; a potência mento, desconecte o
verifique se a voltagem da total usada por todos os aparelhos adaptador CA e todos os
instalação corresponde à conectados nunca deverá ultrapassar a outros fios dos dispositivos
voltagem de entrada especificada no capacidade (watts/ampéres) da externos.
adaptador CA. Como outros adapta- extensão. Cargas excessivas podem ......................................................................................
dores CA podem usar uma polaridade causar o aquecimento do isolamento 109b
diferente ou terem sido projetados para do cabo e até mesmo o seu derreti- • Antes de limpar o equipa-
uma tensão diferente, o uso deles pode mento. mento, desligue a força e
resultar em danos, mau funcionamento ..................................................................................... retire o adaptador CA da
e choques elétricos. 016 tomada (pág. 2).
• Antes de usar o equipamento
Português
...................................................................................... ......................................................................................
009 em países estrangeiros, 110b
• Não dobre ou torça demais o procure o seu vendedor, o • Sempre que suspeitar da
cabo de força e não coloque Centro de Técnico da Roland possibilidade de raio na sua
objetos pesados sobre ele. mais próximo ou um distribuidor área, desconecte o adaptador
Isso pode danificar o cabo e autorizado da Roland, conforme listado CA da tomada.
os componentes, além de provocar na página “Informações”. ......................................................................................
curtos-circuitos. Cabos danificados .....................................................................................
019
representam perigo de choque e
incêndio! • As pilhas jamais devem ser
...................................................................................... recarregadas, aquecidas,
010 desmontadas ou lançadas ao
fogo ou na água.
Nederlands
13
ME-25_p.book 14 ページ 2014年9月24日 水曜日 午前11時27分
OBSERVAÇÕES IMPORTANTES
Fonte de alimentação: 354a
• Não exponha o equipamento direta- Cuidados adicionais Direitos autorais/Licença/
uso das pilhas mente ao sol, não o deixe próximo a
aparelhos que irradiem calor, não o
551
• Esteja ciente de que o conteúdo da Marcas comerciais
301
deixe dentro de veículos fechados nem memória pode ser perdido de maneira 853
• Não ligue este equipamento na mesma irrecuperável em decorrência de um • Não use esta unidade para fins que
exposto a temperaturas elevadas. O
tomada elétrica usada por eletrodomés- mau funcionamento ou do uso inade- possam infringir direitos autorais de
calor excessivo pode deformar e desco-
ticos controlados por inversores (como, quado do equipamento. Para se propriedade de um terceiro. Não
lorir o equipamento.
por exemplo, geladeira, lavadora, micro- 355b proteger do risco de perda de dados assumimos nenhuma responsabilidade
ondas ou ar condicionado) ou que • Ao mover o equipamento de um local importantes, recomendamos que você no que diz respeito a qualquer infração
contenham motores. Dependendo da para outro onde a temperatura e/ou salve periodicamente uma cópia de de direitos autorais de terceiros decor-
forma como o eletrodoméstico estiver umidade seja muito diferente, gotas de backup dos dados importantes armaze- rente do uso desta unidade.
sendo usado, o ruído na fonte de alimen- água (condensação) podem se formar nados na memória da unidade no
tação pode fazer com que o equipamento • MMP (Moore Microprocessor Portfolio)
dentro do equipamento. Se você tentar pendrive ou no computador.
não funcione corretamente ou produza é um potfolio de patente relativo à
usar o equipamento nessa condição, 552
um ruído audível. Se não for possível usar • Infelizmente, uma vez perdido, talvez arquitetura do microprocessador
poderá ocorrer dano ou mau funciona-
uma tomada separada, conecte um filtro seja impossível restaurar o conteúdo desenvolvido pela Technology
mento. Por isso, antes de usar o equipa-
de linha entre este equipamento e a dos dados armazenados na memória do Properties Limited (TPL). A Roland
mento, você deverá esperar algumas
tomada elétrica. equipamento ou do computador. A licenciou essa tecnologia do TPL Group.
horas até que a condensação tenha
302
evaporado por completo. BOSS/Roland Corporation não assume • Roland, BOSS e COSM são marcas
• O adaptador CA começará a gerar calor 360 nenhuma responsabilidade quanto à
após muitas horas seguidas de uso. Isso • Dependendo do material e da tempe- comerciais ou marcas registradas da
perda de dados. Roland Corporation nos Estados Unidos
é normal, não sendo motivo de preocu- ratura da superfície onde você colocar o 553
pação. equipamento, os pés de borracha • Seja cuidadoso ao usar os botões, os e/ou em outros países.
303a
poderão desbotar ou danificar a super- controles deslizantes ou os demais • Todos os nomes de produto mencio-
• Se você for usar o ME-25 por um longo controles e também ao usar os plugues
fície. nados neste documento são marcas
tempo, recomendamos que você use e os conectores. O uso sem cuidado
Coloque um pedaço de feltro ou pano comerciais ou marcas comerciais regis-
um adaptador CA. Caso você prefira pode ocasionar mau funcionamento.
embaixo dos pés de borracha para tradas de seus respectivos proprietários.
usar pilha, recomendamos uma pilha 556
evitar que isso aconteça. Se você fizer
alcalina. • Ao conectar / desconectar os fios,
isso, verifique se o equipamento não vai
304b segure sempre pelo conector — nunca
• As pilhas devem ser sempre colocadas escorregar e cair acidentalmente. puxe pelo fio. Isso evitará curtos Convenções de
ou trocadas antes da conexão de
qualquer outro dispositivo. Dessa
circuitos e danos aos componentes impressão e ícones
forma, você evita mau funcionamento Manutenção 558a
internos dos fios.
neste manual
e/ou danos aos alto-falantes ou aos 401a • Para evitar incomodar os vizinhos,
outros dispositivos. • Para a limpeza diária, passe um pano mantenha o volume do equipamento
306b limpo, seco e macio ou levemente em níveis razoáveis. Se preferir, use Texto ou numerais Indicam botões.
• As pilhas são fornecidas com o equipa- umedecido com água. Para remover fones de ouvido, assim você não precisa entre colchetes [ ] [WRITE] botão WRITE
mento. No entanto, a duração delas manchas difíceis, use um pano molhado se preocupar com as pessoas próximas
pode ser limitada, já que seu objetivo com detergente suave, não abrasivo. (especialmente às madrugadas). Indica informações
principal é permitir o teste. Em seguida, seque completamente com 559a OBSERVAÇÃO que você deve
307
um pano limpo, macio e seco. • Quando precisar transportar o equipa- conhecer ao usar o
• Antes de conectar este equipamento a 402 mento, use a embalagem original
outros dispositivos, desligue a energia ME-25.
• Nunca use benzina, tíner, álcool ou completa (inclusive o acolchoamento)
de todos os outros equipamentos. Isso qualquer tipo de solvente para evitar a que a acompanha, se possível. Caso Indica informações
evitará mau funcionamento e/ou danos possibilidade de descolorir ou deformar contrário, use materiais de embalagem suplementares a
aos alto-falantes ou aos outros disposi- o equipamento. equivalentes. respeito de uma
tivos. 562 operação.
• Alguns cabos de conexão possuem
Manutenção e dados resistores. Não use cabos com resistores Indica informações a
Posicionamento 452 para conectar este equipamento. O uso DICA respeito de uma
351 • Esteja ciente de que todos os dados desses cabos pode tornar o nível de operação prática.
• O uso deste equipamento perto de contidos na memória do equipamento som extremamente baixo ou inaudível.
amplificadores (ou outros equipa- poderão ser perdidos quando ele for Para obter informações sobre as especi- Indica uma página
mentos com grandes transformadores) enviado para manutenção. É preciso ficações dos cabos, entre em contato Ref. de referência.
pode induzir a formação de zumbidos. fazer o backup de dados importantes com o fabricante do cabo.
Para reduzir o problema, mude a (pág. **)
no pendrive ou no computador ou
direção do equipamento ou mova-o anotados em um pedaço de papel
para mais longe da fonte de interfe- (quando possível). Durante a manuten-
rência. ção, toma-se cuidado para evitar a
352a
perda dos dados. No entanto, em deter-
• Este aparelho pode interferir na recep- minados casos (como, por exemplo,
ção de rádio e televisão. Ele não deve quando os circuitos relacionados à
ser usado perto desses tipos de recep- própria memória estiverem fora da
tores.
352b ordem), lamentamos que não seja
• Dispositivos de comunicação sem fio possível restaurar os dados, e a Roland
como, por exemplo, aparelhos de não assume nenhuma responsabi-
telefone celular, podem produzir ruídos lidade em relação à perda de dados.
quando usados próximos desse equipa-
mento. Esse tipo de ruído pode ocorrer
ao receber ou ao fazer uma chamada,
ou durante uma conversa. Se esse tipo
de problema ocorrer, mude os
aparelhos sem fio de lugar de modo a
ficarem mais longe desse equipamento
ou desligue-os.
Especificações principais
ME-25: Diversos efeitos de guitarra/violão Nível de saída -10 dBu Dimensões 300 (L) x 191 (P) x 72 (A) mm
nominal 11-13/16 (L) x 7-9/16 (P) x 2-7/8 (A) inches
Conversão AD 24 bits + método AF
* Método AF (Adaptive Focus) Impedância 2k ohms Altura máxima:
Trata-se de um método de de saída 300 (L) x 191 (P) x 93 (A) mm
propriedade da Roland & BOSS que 11-13/16 (L) x 7-9/16 (P) x 3-11/16 (A) inches
melhora muito a relação sinal/ruído Monitor LED de 7 segmentos, 2 dígitos
Peso 1,9 kg, 4 lbs 4 oz (baterias incluídas)
(S/N) dos conversores A/D e D/A. Fonte de 9 V CC
Acessórios Manual do proprietário
Conversão DA 24 bits alimentação 6 pilhas secas (tipo R6/LR6(AA)) Lista da biblioteca de timbres/Memória
Freqüência de 44,1 kHz Adaptador CA (folheto)
amostragem (BOSS série PSA: vendido separadamente) Adesivo da biblioteca de timbres
Consumo 150 mA Pilhas secas (Alcalinas: tipo LR6 (AA) type) x 6
Memória 60 Serviços Técnicos da Roland
Nível de INPUT: -10 dBu Expectativa Alcalina: 9 horas (folheto de informações)
entrada de duração da Carbono: 3 horas Opções Adaptador CA: BOSS série PSA
AUX IN: -18 dBu
nominal pilha em uso (Esses números podem variar de acordo
com as condições reais de uso.) * 0 dBu = 0,775 Vrms
contínuo
Impedância INPUT: 1M ohm * Com a finalidade de aprimorar o produto, as
de entrada AUX IN: 22k ohms especificações e/ou a aparência deste equipamento
estão sujeitas a alterações sem aviso prévio.
14
ME-25_d.book 1 ページ 2014年9月24日 水曜日 午前11時28分
Gebruikershandleiding
Lees zorgvuldig onderstaande hoofdstukken voordat u dit apparaat gebruikt: “HET APPARAAT VEILIG GEBRUIKEN”
(p. 13) en “BELANGRIJKE OPMERKINGEN” (p. 14).
Deze hoofdstukken bevatten belangrijke informatie over de juiste bediening van het apparaat. Om er bovendien
English
zeker van te zijn dat u elke functie van uw nieuwe apparaat goed begrijpt, leest u best de hele handleiding. De
handleiding moet als handige referentie worden bewaard en voorhanden zijn.
Deutsch
Aansluiten en inschakelen ............................. 2
Belangrijke functies Laten we spelen! ............................................. 3
Een groot aantal modelleeralgoritmes
De Sound Library gebruiken.......................... 4
van realistische voorversterkers met
behulp van COSM Geluiden opslaan (Memory Write) ................ 4
Français
Het apparaat is uitgerust met een uiteenlopende Gedetailleerde instellingen voor effecten
reeks COSM-versterkers (tien types), van zuiver
tot high-gain. maken (Edit-modus) ....................................... 5
Dankzij de Sound Library beschikt u De Noise Suppressor aanpassen ..................................................5
altijd over het juiste geluid Effectenlijst ...................................................................................6
U kunt gemakkelijk het ideale geluid verkrijgen COMP/FX (Compressor/Effecten).................................................6
Italiano
door eenvoudigweg een categorie en variatie te OD/DS (Overdrive/Distortion).......................................................6
selecteren. PREAMP .................................................................................................6
Super Stack-functie MODULATION .....................................................................................7
U kunt het krachtige geluid van een grote stack- DELAY.....................................................................................................7
buizenversterker verkrijgen met slechts een druk REVERB...................................................................................................8
op een knop. PEDAL FX (Pedaaleffecten).............................................................8
Phrase Loop-functie Handige functies............................................. 9 Español
U kunt frasen met een maximumduur van 38
seconden opnemen en herhalend afspelen. De gitaar stemmen (Stemfunctie)........................................9
Kan via USB op een pc worden Phrase Loop-weergave.......................................................... 10
aangesloten De waarden van de bedieningselementen controleren.... 10
U kunt digitale audio workstations (DAW’s) De instellingen voor de bedieningsmethode bepalen...... 10
gebruiken voor digitale opnames of om klanken
Português
Aansluiten en inschakelen
Stap 4 OPMERKING
Elektrische
gitaar
Schakel de versterker als laatste in!
Stap 1 PC
Gebruik een
BOSS-PSA-adapter.
Het gebruik van een andere
Demp het volume op alle adapter kan schade
apparaten wanneer u of defecten veroorzaken.
aansluitingen maakt!
2
ME-25_d.book 3 ページ 2014年9月24日 水曜日 午前11時28分
Laten we spelen!
Probeer, zodra de aansluitingen zijn gebeurd, geluiden te creëren terwijl u de ME-25 bedient.
Pedaaleffecten gebruiken
Een geluid kiezen (geheugen)
U kunt pedaaleffecten gebruiken om wah of een reeks andere
Schakelt over naar het vorige geheugen. pedaaleffecten toe te passen.
Schakelt over naar het volgende geheugen. U kunt een functie aan het pedaal toewijzen door stevig op
de teen van het pedaal te drukken om de status van het
Door het pedaal ingedrukt te houden, kunt u de geheugens
PEDAL FX-lampje te veranderen.
in volgorde doorlopen. PEDAL FX-lampje
Door de twee pedalen tegelijkertijd in te drukken, wordt de
English
stemfunctie geactiveerd.
Uit: Het pedaal regelt het volume.
Wat is een geheugen? Aan: Het pedaal regelt de pedaaleffecten.
Een groep effectinstellingen is een “geheugen”.
Lees “PEDAL FX (pedaaleffecten)” (p. 8) voor meer informatie over
De ME-25 heeft 60 geheugens. pedaaleffecten.
Deutsch
Beeldscherm Super Stack gebruiken
Het huidig Dit geeft u het krachtige geluid
geselecteerde
van een grote
geluid (geheugen)
stack-buizenversterker, zelfs als
en andere
informatie u met een kleine versterker
speelt.
Français
verschijnt hier.
Door op deze knop te drukken,
wordt Super Stack geactiveerd
en gaat het SUPER
STACK-lampje branden.
Italiano
Naar sologeluiden overschakelen Het volume en de toonkwaliteit wijzigen
Dit schakelt over naar geluiden die geschikt zijn voor DRIVE-knop
solowerk. Door op dit pedaal te drukken, wordt SOLO Past de hoeveelheid distortion van de voorversterker aan.
TONE-knop
geactiveerd en gaat het pedaallampje branden.
Wijzigt de toonkwaliteit van de voorversterker.
VOLUME-knop Español
Draai aan de VOLUME-knop terwijl SOLO aan staat om het Dit past het volumeniveau van de voorversterker aan.
gewenste solovolume te kiezen.
* Kan niet worden gewijzigd in de Edit-modus (p. 5).
De knoppen worden uitgeschakeld als de voorversterker wordt
Phrase Loop-weergave uitgeschakeld. Open de Edit-modus om de aan/uit-status van de
voorversterker te controleren (p. 5).
Houd dit pedaal twee seconden of langer ingedrukt
Português
Bij ongewenste resultaten, zoals geen weergave van geluid, controleert u het volgende:
Nederlands
3
ME-25_d.book 4 ページ 2014年9月24日 水曜日 午前11時28分
Lees de aparte “Sound Library-lijst” voor meer informatie over de geluiden van de Sound Library.
1,3
Druk op [EXIT] om de Memory Write-procedure te annuleren.
4
ME-25_d.book 5 ページ 2014年9月24日 水曜日 午前11時28分
Druk stevig op de teen van het expressiepedaal tot het PEDAL FX-
English
lampje brandt om PEDAL FX te selecteren.
Deutsch
Effect uit Effect aan Aanpassing effect Het aantal types hangt af van het effect. Door bijvoorbeeld het
COMP/FX-type op 4 in te stellen, wordt 3 (AC SIM) als type
geselecteerd.
Français
Dit beëindigt de Edit-stand.
In de Edit-stand wordt de schuingedrukte functie geactiveerd.
6. Voer de Memory Write-procedure uit als u de
Bijvoorbeeld: de CLEAN-knop
instellingen die u zonet hebt bepaald, wilt
opslaan.(p. 4).
OPMERKING
Italiano
Die doet dienst als COMP/FX-knop. Door het apparaat uit te schakelen of het geheugen te verwisselen
vóór de Memory Write-procedure, zal het geluid dat u hebt
gecreëerd verloren gaan.
5
ME-25_d.book 6 ページ 2014年9月24日 水曜日 午前11時28分
Effectenlijst
Alle productnamen die in dit document worden vermeld, zijn handelsmerken of gedeponeerde handelsmerken van de respectieve
eigenaars. Die ondernemingen maken geen deel uit van BOSS en hebben geen licentie of autorisatie verleend voor de ME-25 van BOSS. Hun
namen worden uitsluitend gebruikt om de apparaten te identificeren waarvan het geluid door de ME-25 van BOSS wordt gesimuleerd.
COMP/FX (Compressor/Effecten)
Dit creëert een effect dat een sustain toevoegt aan het geluid, zonder vervorming.
Verklaring
1: COMP Dit creëert een effect dat een sus- SUSTAIN: ATTACK: LEVEL:
tain toevoegt aan het geluid, zon- Dit bepaalt de sustain van Dit bepaalt de attack (aan- Dit bepaalt het volumeni-
der vervorming. het geluid. vang) van het effectgeluid. veau van het effect.
2: T.WAH Dit creëert een wah-effect dat rea- SENS: TONE: PEAK:
geert op de intensiteit van uw aan- Dit bepaalt de responsge- Dit bepaalt het geluid (hel- Dit bepaalt de intensiteit
slagen. voeligheid van het inko- derheid) van de wah. van het wah-geluid.
mende geluid.
3: AC SIM Dit zet het geluid van uw elektri- LOW: HIGH: LEVEL:
sche gitaar om in een akoestisch Dit wijzigt de toon van de Dit wijzigt de toon van de Dit bepaalt het volumeni-
gitaargeluid. lagere frequenties. hoge frequenties. veau van het effect.
OD/DS (Overdrive/Distortion)
Deze effecten voegen een typische distortion of sustain toe.
Verklaring
1: BOOST Dit is een gain booster. Het werkt goed voor het creë- DRIVE: TONE: LEVEL:
ren van distortion met een COSM-voorversterker of Dit bepaalt de inten- Dit bepaalt de hel- Dit bepaalt het volu-
om krachtige zuivere tonen te creëren wanneer het siteit van de distor- derheid van het meniveau voor OD/
alleen wordt gebruikt. tion. geluid. DS.
2: OD-1 Dit is het geluid van de BOSS OD-1. Het creëert een
zachte distortion.
3: T-SCREAM Dit modelleert een Ibanez TS-808.
4: BLUES Dit is een unieke overdrive die getrouw de nuances
van de aanslagen reproduceert.
5: DIST Dit is een scherpe distortion met rijke sustain.
6: CLASSIC Dit is het geluid van een vintage stack-versterker.
7: MODERN Dit is het geluid van een grote high-gain-versterker.
8: METAL Dit is een distortion die de middentonen benadrukt.
9: CORE Dit is een distortion die de middentonen dempt.
10: FUZZ Dit is een distortion die een typische ruwe en zware
sound creëert.
PREAMP
Dit modelleert de voorversterkerrespons.
Verklaring
1: CLEAN Dit is een zuiver geluid dat vloeiend en warm is. DRIVE: TONE: VOLUME:
2: TWIN Dit modelleert een Fender Twin Reverb. Dit bepaalt de hoe- Dit wijzigt de toon- Hiermee past u het
veelheid distortion kwaliteit van de volumeniveau van de
3: TWEED Dit is een crunch-geluid van een Fender Bassman. van de voorversterker. voorversterker. voorversterker aan.
4: VO DRIVE Dit is een crunch-geluid dat aan een VOX-combo-
versterker doet denken.
5: BG LEAD Dit is een lead-geluid van een Mesa/Boogie-combo-
versterker. U kunt de volgende parameters instellen terwijl het [DRIVE
(PREAMP)]-lampje snel knippert.
6: MS VINTAGE Dit is een geluid dat aan de Marshall-versterkers van Door [DRIVE (PREAMP)] ingedrukt te houden tot “Ed” op het scherm
de jaren ’70 doet denken. begint te knipperen, kunt u het lampje op de [DRIVE (PREAMP)] snel
7: MS MODERN Dit modelleert het higher-gain-geluid van recente laten knipperen.
vintage Marshall-versterkers. Als u opnieuw op [DRIVE (PREAMP)] drukt, keert de ME-25 terug naar
8: 5150 DRIVE Dit is een lead-kanaal van een Peavey EVH5150. de normale stand.
9: R-FIER Dit modelleert een Mesa/Boogie Dual Rectifier.
10: ULTRA METAL Dit is een typische metalversterker met exclusief BASS: MIDDLE: TREBLE:
ontwerp die een geluid creëert met specifieke con- Dit bepaalt de toon- Dit bepaalt de toon- Dit bepaalt de toon-
touren in combinatie met een krachtige bas en kwaliteit van de kwaliteit van de kwaliteit van de
zware distortion. Dit is ideaal voor elk type metal lagere frequenties. middenfrequenties. hoge frequenties.
met complexe en intense rifs, zware, donderende
basrifs, bliksemsnelle solo's en meer.
6
ME-25_d.book 7 ページ 2014年9月24日 水曜日 午前11時28分
MODULATION
Deze effecten verbreden, moduleren en/of verschuiven de toonhoogte van het geluid.
Verklaring
1: CHORUS Dit effect voegt subtiele varia- RATE: DEPTH: E.LEVEL:
ties toe om de toon in een Dit bepaalt de snelheid van Dit bepaalt de hoeveelheid van Dit bepaalt het volu-
bredere, dikkere en mooiere het effect. het effect. meniveau van het
toon om te vormen. effect.
2: PHASER Dit creëert een wervelende RATE: DEPTH: RESONANCE:
sound, met verschoven fase. Dit bepaalt de snelheid van Dit bepaalt de hoeveelheid van Dit bepaalt de intensi-
het effect. het effect. teit van het effect.
3: FLANGER Dit creëert een modulatie- RATE: DEPTH: RESONANCE:
effect zoals het opstijgen en Dit bepaalt de snelheid van Dit bepaalt de hoeveelheid van Dit bepaalt de intensi-
English
dalen van een jet-motor. het effect. het effect. teit van het effect.
4: ROTARY Dit effect creëert het geluid RATE: DEPTH: E.LEVEL:
van draaiende luidsprekers. Dit bepaalt de snelheid van Dit bepaalt de hoeveelheid van Dit bepaalt het volume-
het effect. het effect. niveau van het effect.
5: UNI-V Dit modelleert de Uni-Vibe, RATE: DEPTH: E.LEVEL:
een effect dat hoort bij de Dit bepaalt de snelheid van Dit bepaalt de hoeveelheid van Dit bepaalt het volume-
rocksound van de jaren ’60. het effect. het effect. niveau van het effect.
6: TREMOLO Dit creëert een retro-effect RATE: DEPTH: E.LEVEL:
Deutsch
door cyclische wijzigingen Dit bepaalt de snelheid van Dit bepaalt de hoeveelheid van Dit bepaalt het volume-
van het volumeniveau. het effect. het effect. niveau van het effect.
7: HARMONIST Dit creëert harmonieën die KEY: HARMONY: E.LEVEL:
doen denken aan dubbele Dit bepaalt de toonaard van het Dit bepaalt de toonhoogte van Dit bepaalt het volu-
gitaren. nummer dat wordt gespeeld. de harmonie. meniveau van het
* Speel alleen maar enkele noten Bv. effect.
wanneer u het harmonist-effect
gebruikt.
Français
-1 octaaf Ontstemmen +1 octaaf
8: OCTAVE Dit zorgt voor meer body door - D.LEVEL: E.LEVEL:
een geluid toe te voegen van Dit bepaalt het volumeniveau Dit bepaalt het volu-
een octaaf lager. van het directe geluid. meniveau van het
* Speel alleen enkele noten bij het effect.
octaafeffect.
DELAY
Italiano
Dit vertraagt het geluid om een echo-effect te verkrijgen. Zo voegt u meer body aan het geluid toe en kunt u complexe geluiden creëren.
Verklaring
1: 1-99 ms Dit is een delay van 1 tot TIME: FEEDBACK: E.LEVEL:
99 ms (milliseconden). Dit bepaalt de delay-tijd in stappen van 1 ms. Dit bepaalt het aantal Dit bepaalt het volume-
Ideaal voor een verdub- Bv. 2ms 99ms keer dat het delay- niveau van het delay-
belingseffect. geluid wordt herhaald. geluid.
2: 100-990 ms Deze delay heeft een TIME: FEEDBACK: E.LEVEL: Español
delay-tijd van 100 tot Dit bepaalt de delay-tijd in stappen van 10 ms. Dit bepaalt het aantal Dit bepaalt het volume-
990 ms (milliseconden). Bv. 120ms 990ms keer dat het delay- niveau van het delay-
geluid wordt herhaald. geluid.
3: 1000-6000 ms Dit is een delay van TIME: FEEDBACK: E.LEVEL:
1.000 tot 6.000 ms (milli- Dit bepaalt de delay-tijd in stappen van 100 ms. Dit bepaalt het aantal Dit bepaalt het volume-
seconden). Ideaal voor Bv. 1.200ms 6.000ms keer dat het delay- niveau van het delay-
Português
Als TAP is geselecteerd, kunt u het tempo van de delay op gepunteerde Timing
achtste noten of kwartnoten instellen door het SOLO-pedaal twee of
meer keer in de maat van het tempo van de song in te drukken. Het Delay-geluid
lampje van de SOLO-pedalen knippert in de maat van het huidige tempo. TIME-instelling
7
ME-25_d.book 8 ページ 2014年9月24日 水曜日 午前11時28分
REVERB
Dit voegt een slepende galm toe aan het geluid.
Verklaring
1: ROOM Dit simuleert de galm van een kamer. - - LEVEL:
2: HALL Dit simuleert de galm van een hal. Dit bepaalt het volu-
meniveau van het
effect.
PEDAL FX (Pedaaleffecten)
Dit creëert een reeks effecten met behulp van de expressiepedalen van de ME-25.
Lees “Pedaaleffecten gebruiken” voor informatie over het gebruik van pedaaleffecten (p. 3).
Verklaring
1: WAH Dit is een wah-effect. - - -
2: +1 OCTAVE Dit laat u toe om de toonhoogte traploos een
3: -1 OCTAVE octaaf hoger of lager dan het originele geluid weer
te geven.
* Speel alleen enkele noten bij het octaafeffect.
4: FREEZE Hiermee kunt u het geluid langer laten doorklin-
ken met behulp van een pedaal. U kunt dit gebrui-
ken om een akkoordgeluid aan te houden terwijl u
een melodielijn speelt.
FREEZE gebruiken
1. Druk op de hiel van het expressiepedaal.
2. Bespeel de gitaar en druk op de teen van het expressiepedaal, terwijl het geluid wordt weergegeven.
Het geluid wordt aangehouden zolang u het pedaal ingedrukt houdt.
* U kunt het volume van het aangehouden geluid aanpassen door de positie van het pedaal te wijzigen.
3. Door op de hiel van het expressiepedaal te drukken, wordt het aangehouden geluid gestopt.
8
ME-25_d.book 9 ページ 2014年9月24日 水曜日 午前11時28分
Handige functies
English
Te laag Gestemd Te hoog
(snel knipperend) (snel knipperend)
Deutsch
Het stemapparaat wordt uitgeschakeld.
Français
bedienen.
Het stemapparaat is ingeschakeld.
Beeldscherm Toonhoogte
Italiano
35-45 435-445 [Hz]
9
ME-25_d.book 10 ページ 2014年9月24日 水曜日 午前11時28分
Handige functies
Phrase Loop-weergave
U kunt tot 38 seconden opnemen van uw muziekspel en het 1. Houd het SOLO-pedaal twee seconden of
opgenomen gedeelte doorlopend laten herhalen. U kunt ook langer ingedrukt (STANDBY).
bijkomende stukken van uw muziekspel toevoegen aan de Phrase Loop gaat in de stand-bystand voor het opnemen en
opname tijdens de weergave (overdubben). het lampje van de SOLO-pedalen knippert in een vast ritme.
Zo kunt u eenvoudig en rechtstreeks achtergrondmuziek creëren.
2. Druk op het SOLO-pedaal (REC).
Het opnemen start zodra u op het SOLO-pedaal drukt en het
1. > 2 sec 2. lampje van de SOLO-pedalen snel knippert.
ingedrukt 3. Druk opnieuw op het SOLO-pedaal (PLAY).
STANDBY REC
houden
Opname stopt. Zodra de opname wordt gestopt, begint de
herhaalde weergave van uw opname en brandt het lampje
van de SOLO-pedalen ononderbroken.
5. 5. 3.
Een oscillerend geluid kan ontstaan als de opnametijd erg kort is.
3. Druk op [WRITE].
De instelling wordt opgeslagen in het geheugen.
10
ME-25_d.book 11 ページ 2014年9月24日 水曜日 午前11時28分
Handige functies
English
Lees aandachtig het Readme-bestand dat is meegeleverd met het gedownloade bestand.
L
Deutsch
Audiosignalen
sturen en
Français
Wijzig het volume ontvangen
met de software
OPMERKING
Italiano
Gebruik de software van uw computer om het niveau van de signaalinvoer via USB te regelen (dit kan niet op de ME-25 zelf worden geregeld).
Gebruik het expressiepedaal of pas andere volumeparameters aan om het volume van een gitaar te wijzigen.
Als u het geluid dat wordt ingevoerd moet weergeven, dempt u eerst volledig het volume met behulp van de software op uw computer. Verhoog het
volume vervolgens geleidelijk aan tot u het gewenste niveau hebt bereikt.
De ingebouwde gitaarversterkersimulator wordt ingeschakeld als de ME-25 op een computer wordt aangesloten.
Het signaal dat via AUX IN wordt ingevoerd, wordt niet uitgevoerd via USB. Español
Português
Nederlands
11
ME-25_d.book 12 ページ 2014年9月24日 水曜日 午前11時28分
Bijlagen
De fabrieksinstelling is “5.”
5. Druk op [WRITE].
De instelling wordt opgeslagen in het geheugen.
Signaalketen
EFFECT
PEDAL FX COMP/FX OD/DS PREAMP USB USB AUX IN
INPUT OUT IN
USB PHONES
NOISE VOLUME
(PEDAL) MODULATION DELAY REVERB
SUPPRESSOR OUTPUT
* In principe worden effecten aangesloten in de volgorde die hierboven wordt getoond. Deze volgorde kan echter automatisch wijzigen om de
aansluitingsvolgorde te optimaliseren en om overeen te stemmen met bepaalde instellingen.
12
ME-25_d.book 13 ページ 2014年9月24日 水曜日 午前11時28分
English
gebruikt u een zacht stuk stof of een
papieren handdoekje om alle
002c 011
• Open het apparaat of de • Zorg ervoor dat er geen
101b restanten van het lek uit het batte-
• Het apparaat en de rijvak te verwijderen. Plaats
netstroomadapter niet (en voer voorwerpen (bv. brandbaar netstroomadapter moeten zo vervolgens nieuwe batterijen. Let
er geen wijzigingen aan uit). materiaal, munten, spelden) worden geplaatst dat hun erop dat er geen batterijvloeistof op
of vloeistoffen (water, locatie of positie hun venti- uw handen of huid terechtkomt om
......................................................................................
003 frisdranken enz.) in het latie niet verstoort. huidirritatie te voorkomen. Let er
• Probeer het apparaat niet te apparaat terechtkomen. ...................................................................................... vooral op dat er geen batterij-
herstellen of onderdelen ervan 102d vloeistof in uw ogen terechtkomt.
te vervangen (behalve als deze ..................................................................................... • Neem altijd alleen de stekker Spoel onmiddellijk het aangetaste
handleiding specifieke 012c van de netstroomadapter zelf deel met stromend water als er
• Schakel het toestel onmid- vast bij het aansluiten op en batterijvloeistof in de ogen is
Deutsch
instructies geeft om dat te doen). Laat het terechtgekomen.
onderhoud over aan uw handelaar, het dellijk uit, trek de netstroom- het loskoppelen van een 6
dichtstbijzijnde Roland Service Center of adapter uit het stopcontact stopcontact of dit apparaat. • Bewaar batterijen nooit samen met
een bevoegde Roland-verdeler, zoals en vraag onderhoud aan bij ...................................................................................... metalen voorwerpen zoals
vermeld op de pagina “Informatie”. uw handelaar, dichtstbijzijnde Roland 103b balpennen, halskettingen,
Service Center of een bevoegde Roland- • U moet regelmatig de haarspelden enz.
...................................................................................... netstroomadapter loskop-
004 verdeler, zoals vermeld op de pagina ......................................................................................
• Installeer het apparaat nooit “Informatie” als: pelen en schoonmaken met 112
Français
• objecten of vloeistof in het apparaat in uw regio.
de buurt van een verwar- zijn terechtgekomen; of Stofophoping tussen de stekker en het
mingsleiding, op stopcontact kan leiden tot slechte ......................................................................................
• het apparaat aan regen werd bloot- 118a
apparatuur die warmte gesteld (of op een andere manier isolatie en brand veroorzaken.
produceert); of die • Houd de USB-aanslui-
nat is geworden); of ...................................................................................... tingsdop die u verwijdert
• nat zijn (bv. bad, wasruimte, op • het apparaat niet normaal lijkt te
104
natte vloeren); of die • Zorg ervoor dat de snoeren buiten het bereik van
werken of opmerkelijk anders en kabels niet in de war kinderen, zodat ze die niet
• worden blootgesteld aan damp of functioneert.
rook; of die raken. Plaats alle snoeren en per ongeluk kunnen inslikken.
..................................................................................... ......................................................................................
• worden blootgesteld aan zout; of die 013 kabels ook buiten het bereik
• vochtig zijn; of die • Bij gezinnen met kleine van kinderen.
kinderen dient een volwassene ......................................................................................
• aan regen worden blootgesteld; of die toezicht te houden tot het kind 106
• stoffig of zanderig zijn; of die • Klim nooit op het apparaat en
Italiano
in staat is om alle regels te
• aan hoge trillingsniveaus en volgen die essentieel zijn voor het veilige plaats er geen zware
schokken worden blootgesteld. gebruik van het apparaat. voorwerpen op.
......................................................................................
007 ..................................................................................... ......................................................................................
014
• Zorg ervoor dat het apparaat • Bescherm het apparaat tegen 107d
altijd horizontaal en stabiel is • Neem de netstroomadapter
zware schokken. zelf of de stekkers nooit vast
geplaatst. Plaats het nooit op (Laat het niet vallen!)
een standaard die kan met natte handen bij het
wankelen of op aflopende oppervlakken. ..................................................................................... aansluiten op of loskoppelen
015 van een stopcontact of dit apparaat.
...................................................................................... • Laat het netsnoer van het
008b ......................................................................................
• Gebruik alleen de opgegeven apparaat geen stopcontact 108b
Español
netstroomadapter (PSA-reeks) delen met een buitensporig • Koppel de netstroomadapter
en controleer of het lijnvoltage aantal andere apparaten. en alle snoeren los van
van het elektriciteitsnet Wees vooral voorzichtig met verleng- externe apparaten voordat u
overeenkomt met het ingangsvoltage dat kabels, het totale stroomverbruik van het apparaat verplaatst.
is aangegeven op de netstroomadapter. alle apparaten die u op de verlengkabel ......................................................................................
Andere netstroomadapters gebruiken hebt aangesloten, mag nooit het 109b
maximumvermogen (watt/ampère) • Schakel het apparaat uit en
mogelijk een andere polariteit of zijn trek de netstroomadapter uit
ontworpen voor een ander voltage. Het voor de verlengkabel overschrijden.
Buitensporige belasting kan de isolatie het stopcontact voordat u
gebruik van dergelijke adapters kan resul- het apparaat schoonmaakt
teren in schade, defecten of elektrische van de kabel opwarmen en uiteindelijk
doen smelten. (p. 2).
schokken. ......................................................................................
.....................................................................................
Português
13
ME-25_d.book 14 ページ 2014年9月24日 水曜日 午前11時28分
BELANGRIJKE OPMERKINGEN
Voeding: batterijgebruik Extra voorzorgsmaatregelen Auteursrechten/
354a
• Sluit dit apparaat niet aan op een buurt van warmtebronnen, laat het niet
551
elektrisch apparaat wordt gebruikt dat gewist als gevolg van een defect of • Gebruik dit apparaat niet voor
het niet bloot aan extreme tempera-
door een signaalomzetter (zoals een verkeerd gebruik van het apparaat. Om doeleinden die de auteursrechten van
turen. Overmatige warmte kan het
koelkast, wasmachine, microgolfoven of uzelf te behoeden voor het verlies van een derde kunnen schenden. Wij zijn
apparaat vervormen of verkleuren.
airconditioner) wordt bestuurd of dat een 355b
belangrijke gegevens, raden wij aan dat niet verantwoordelijk voor schendingen
• Bij verplaatsing van een locatie naar een van auteursrechten van derden door
motor bevat. Afhankelijk van de manier u regelmatig een back-up op een
andere waar de temperatuur en/of uw gebruik van dit apparaat.
waarop elektrische apparaten worden computer maakt van belangrijke
vochtigheid sterk verschilt, kunnen er
gebruikt, kan ruis van de stroomvoor- gegevens die u hebt opgeslagen in het • MMP (Moore Microprocessor Portfolio)
waterdruppels (condens) gevormd
ziening defecten aan dit apparaat of geheugen van het apparaat. verwijst naar een patentportfolio
worden in het apparaat. Er kunnen
hoorbare ruis veroorzaken. Als het niet 552
• Draag voldoende zorg bij het gebruik van merken van Roland Corporation in de
u het apparaat plaatst, kunnen de
tot bezorgdheid. de knoppen, schuifknoppen of andere Verenigde Staten en/of andere landen.
303a rubberen voetstukken het oppervlak
• Als u de ME-25 gedurende een langere mogelijk verkleuren of ontsieren. bedieningselementen van het apparaat • Alle productnamen die in dit document
periode wilt gebruiken, raden we u aan U kunt een stuk vilt of stof onder de en bij het gebruik van aansluitingen en worden vermeld, zijn handelsmerken of
een netstroomadapter te gebruiken. Als rubberen voetstukken plaatsen om dit ingangen. Ruw omgaan met de gedeponeerde handelsmerken van de
u liever een batterij gebruikt, raden we te voorkomen. Zorg er in dit geval voor apparatuur kan defecten veroorzaken. respectieve eigenaars.
een alkalinebatterij aan. dat het apparaat niet verschuift of per
556
• Batterijen moeten altijd worden geïnstal- ongeluk in beweging komt. aansluit / loskoppelt, trek nooit aan de Drukovereenkomsten
leerd of vervangen voordat u andere kabel zelf. Op die manier vermijdt u
en pictogrammen in
apparaten aansluit. Op die manier kunt u
defecten en/of schade aan luidsprekers of
Onderhoud kortsluitingen of schade aan de
inwendige elementen van de kabel. deze handleiding
401a
andere apparaten voorkomen. • Gebruik een zachte, droge doek of een
558a
• Batterijen worden bij het apparaat doek die licht bevochtigd is met water een redelijk niveau om te vermijden dat
geleverd. De levensduur van deze om het apparaat dagelijks af te vegen. u uw buren stoort. Misschien gebruikt u Tekst of cijfers in duiden
batterijen kan echter beperkt zijn Gebruik een doek die met een zachte, liever een hoofdtelefoon en hoeft u zich vierkante haken [ ]
niet-schurende zeepoplossing is
knoppen aan.
aangezien ze hoofdzakelijk voor geen zorgen te maken over uw
testdoeleinden werden gebruikt. bevochtigd om hardnekkig vuil te omgeving (vooral tijdens de late uren). [WRITE] WRITE-
307
verwijderen. Veeg vervolgens het 559a
knop
• Schakel alle apparaten uit voordat u dit apparaat grondig schoon met een • Verpak het apparaat indien mogelijk in
apparaat op andere apparaten aansluit. zachte, droge doek. de doos (inclusief opvulling) waarin het
OPMERKING Duidt
Op die manier kunt u defecten en/of 402 werd geleverd als u het moet
schade aan luidsprekers of andere • Gebruik geen benzine, verdunnings- vervoeren. Anders zult u gelijkaardige
apparaten voorkomen. middelen, alcohol of oplosmiddelen om verpakkingen moeten gebruiken. informatie aan
verkleuring en/of vervorming te 562
waaraan u
• Sommige kabels bevatten weerstanden.
voorkomen.
Plaatsing Gebruik geen kabels met weerstanden
om aansluitingen op dit apparaat uit te
moet denken
351
• Als u het apparaat gebruikt in de buurt Reparaties en gegevens voeren. Het gebruik van dergelijke kabels als u de ME-25
van eindversterkers (of andere 452 kan het geluidsniveau extreem verlagen gebruikt.
apparatuur met grote eindversterkers) • Denk eraan dat alle gegevens in het of zelfs onhoorbaar maken. Contacteer de
kan er gezoem ontstaan. Om het geheugen van het apparaat verloren fabrikant van de kabel voor informatie
probleem te verhelpen kunt u het kunnen gaan als het apparaat voor over kabelspecificaties.
Duidt extra
apparaat opnieuw richten of verder van reparatie wordt ingezonden. Maak steeds informatie aan
de storingsbron plaatsen. een back-up van belangrijke gegevens op
352a
een computer of noteer ze op papier over een
• Dit apparaat kan radio- en televisieont-
vangst verstoren. Gebruik dit apparaat (indien mogelijk). Tijdens herstellingen functie.
gaat men met de nodige zorg te werk om
niet in de buurt van dergelijke gegevensverlies te vermijden. In bepaalde Duidt
ontvangers.
352b gevallen echter (zoals wanneer het circuit
• Ruis kan ontstaan als draadloze van het geheugen zelf mankementen informatie aan
communicatieapparaten, zoals gsm’s, in vertoont) kunnen we de gegevens over een
de buurt van dit apparaat worden mogelijk niet herstellen en Roland erkent
gebruikt. Dergelijke ruis kan ontstaan geen aansprakelijkheid voor dergelijk handige
als een oproep wordt ontvangen of gegevensverlies. functie.
gemaakt of tijdens gesprekken.
Verplaats dergelijke apparaten zodat ze
zich op een grotere afstand van dit Duidt een
apparaat bevinden of schakel ze uit als referentiepagina
u dergelijke problemen ervaart. (p. **)
aan.
Belangrijkste specificaties
ME-25: multi-effecten voor gitaar Beeldscherm 7 segmenten, led van 2 cijfers Accessoires Gebruikershandleiding
ADConversie 24-bit + AF-methode Voeding DC 9 V Sound Library/Memory-lijst
* AF-methode (adaptieve (infoblad)
focusmethode) Dit is een methode Droge batterijen (R6/LR6 (AA) Sound Library-sticker
die eigendom is van Roland & BOSS type) x 6 Droge batterijen (Alkaline: LR6 (AA)
die de signaal-ruisverhouding (S/N) Netadapter (BOSS PSA-reeks: type) x 6
van de A/D- en D/A-convertoren apart verkrijgbaar) Roland Service (Informatieblad)
drastisch verbetert.
Stroomverbruik 150 mA Opties Netstroomadapter:
DAConversie 24 bit
Verwachte bat- Alkaline: 9 uur BOSS PSA-reeks
Samplefrequentie 44,1 kHz terijduur onder Carbon: 3 uur * 0 dBu = 0,775 Vrms
Geheugen 60 voortdurend (Deze waarden variëren * Met het oog op productverbetering, kunnen de
Nominaal INPUT: -10 dBu
gebruik afhankelijk van de werkelijke specificaties en/of het uitzicht van dit toestel worden
gebruiksomstandigheden.) gewijzigd zonder voorafgaande kennisgeving.
ingangsniveau
AUX IN: -18 dBu Afmetingen 300 (B) x 191 (D) x 72 (H) mm
Ingangsimpe- INPUT: 1M ohm 11-13/16 (B) x 7-9/16 (D) x 2-7/8
dantie (H) inch
AUX IN: 22k ohm
Nominaal -10 dBu Maximumhoogte:
uitgangsniveau 300 (B) x 191 (D) x 93 (H) mm
11-13/16 (B) x 7-9/16 (D) x 3-11/
Uitgangsimpe- 2k ohm 16 (H) inch
dantie
Gewicht 1,9 kg, 4 lbs 4 oz (inclusief batterij)
14
ME-25_d.book 15 ページ 2014年9月24日 水曜日 午前11時28分
MEMO
ME-25_d.book 16 ページ 2014年9月24日 水曜日 午前11時28分
MEMO
Owner’s Manual
English
Bedienungsanleitung
Mode d'emploi
Manuale dell'utente
Deutsch
Manual de instrucciones
Manual do proprietário
Gebruikershandleiding
Français
Italiano
Español
Português
Nederlands