Professional Documents
Culture Documents
For
0 3 5 Operating a DVR (Digital video recorder) Operating a digital cable box Operating a DAV (DVD/Receiver combo)
example, if you’re entering the code for Changing the Component Type on the CBL/ Component code numbers / Analog cable box/
a Philips VCR, you would press -35. 3 (*1LIST) zREC: To record, press N 3 To use the “FAVORITE” function *2x: To stop. 3 To select numbers 10 and above. qf CHANNEL +: Presetting or
SAT and DVD buttons Remote Button Descriptions Adaptador para cable analógico
Remote Commander RM-V202 5 Press and release the ENT button to store
the code number in the
Your Code Number
ENT
At the factory, “cable box” is assigned on the CBL/SAT button and
“DVD player” on the DVD button. By completing the following
SET POWER
General
To call up the title of the
recorded program.
4 To switch the output of the SAT
while pressing zREC.
First release N, then
release zREC. To stop
4 To switch the output of the SAT
receiver to the TV. (When
connecting a TV cable or
qs
*2X: To pause.
and qd
To change the channel.
4 To change the input mode.
5 VOLUME +: Volume up (DAV).
VOLUME –: Volume down
turning frequency
to a higher: +.
CHANNEL –: Presetting or
Números de código de componentes
English
Brand
ABC
Code No.
002, 003, 009, 032, 046
Commander’s memory.
TV VCR CBL / SAT DVD
1 To set up the Commander,
procedure, you can change this setting so that you can set up any receiver to the TV. recording, perform the antenna to the receiver, the (for example, to change to (DAV). turning frequency Hamlin/Regal 022, 023, 024, 025, 026
Operating Instructions 6 Go to “Step 2: Checking if the Code Number Works” to finish component on these buttons. 1 2 3
press SET while pressing
POWER.
(When connecting a TV cable or same procedure. output switches between a TV channel 5, press 0 and 5, or 6 To show the current play status to a lower: –. TV/VCR/COMBO* Jerrold/G.I 031, 001, 002, 003, 004, 005, 006, 007,
antenna to the receiver, the x: To stop. and SAT program). on the screen. qg To switch the subtitle. The left row of the table shows the brand, the center row shows the
Manual de instrucciones (parte posterior) setting up. 1 While pressing the SET button, press the POWER button. 4 5 6 2 Component select buttons.
output switches between a TV X: To pause. 6 To turn on the display. qf
press 5 and ENT).
CH+: Channel up. 7 To mute the volume. Press again qh To display the Top Menu. component (TV, VCR or COMBO) and the right row shows the code No. Oak
008, 018, 022, 032
027, 028, 029
To switch to the operations
If you press a wrong button in step 4 2 Press the CBL/SAT or DVD button. 7 8 9 and SAT program). qs and qd 8 To move the cursor upward, CH–: Channel down. to turn muting off. qj To change the sound. * COMBO stands for the unit combined with TV and VCR. Panasonic 019, 020, 021
© 2003 Sony Corporation Printed in China of each component, press
Press the POWER button while pressing the SET button and then go (*1THUMBS+) To change the channel. downward, to the left, or to the qg To exit the setting menu. 8 To move the cursor upward, qk To enter the selection of the Pioneer 014, 015
0 the button on which that Analog cable box, SAT (digital satellite receiver), digital cable box,
back to step 2. 3 Press and release the x (stop) button. PIP ENT
To select the desired recorded For example, to change to right. qh To turn on the display of a downward, to the left, or to the MENU display. Scientific Atlanta 009, 010, 011
VOL CH
component is assigned. DVR (digital video recorder), DVD and DAV
TV / VIDEO
program. channel 5, press 0 and 5 (or, 9 To call up the MENU display. shortcut menu. right. ql N: To play. Tocom 031, 016, 017, 045
4 Press and release one of the following buttons; 5 Volume up: + The left row of the table shows the brand and the right row shows
DISPLAY
(It is necessary to have press 5 and ENT). 0 and ql qj To call up the title bar and 9 To call up the MENU. m: To rewind. Zenith 012, 013
Step 2: Checking if the Code Number Works Volume down: – the code No.
English 1 to assign a VCR recorded the desired program). qf CH+: Channel up. *2N: To play. toggle the title bar on/off in qa To turn the power on/off. M: To fast-forward.
7 To mute the volume on TV.
SLEEP
2 to assign a DAV 6 To turn on the display. (*1PAGE+) Page up. *2m: To rewind. CABLE mode. qs Number buttons: To set items x: To stop.
MUTING RECALL
qa To turn on and off the
(*1THUMBS–) CH–: Channel down. X: To pause.
Español
1 Power on the component you want to set up. 3 to assign a digital satellite receiver, a digital cable box or a power of the selected *2M: To fast-forward. qk To bring up the Station Index selected on the screen.
For the customers in the U.S.A. Installing the Batteries digital video recorder To select the desired recorded (*1PAGE–) Page down. *2zREC: To record, press N when a program guide is not qd To enter the setting. TV/VCR/COMBO* Digital cable box/Decodificador digital
2 Aim the Remote Commander at the component and press a button component.
Before replacing the batteries, have new ones ready beforehand. 8 to assign a TV MENU GUIDE OK program. qg To clear the setting. while pressing zREC. displayed. La fila izquierda de la tabla muestra la marca, la central el
to check if that button works. Brand Code No.
WARNING Slide open the battery compartment and insert two size AA (R6) For example, press the POWER button to see if it works on your
9 to assign an analog cable box (It is necessary to have
recorded the desired program). qh
To exit the setting menu.
(*1REPLAY)
First release N, then
release zREC. To stop
To select the channel that is componente (televisor (TV), videograbadora (VCR) o COMBO), y
Sony 013
- to assign a DVD REC
highlighted. la derecha el número de código.
This equipment has been tested and found to comply with the limits batteries (not supplied). component . 8 To move the cursor upward, To replay. recording, perform the Specifications * COMBO significa que la unidad está combinada con un televisor y una
Adelphia 044
for a Class B digital device, pursuant to Part 15 of the FCC Rules. Be sure to line up the + and – on the batteries with the + and – on the 5 Press and release the ENT button. downward, to the left, or to the Or to go into REC/REVIEW same procedure. videograbadora.
Americast 046
These limits are designed to provide reasonable protection against 3 Check that the other buttons of the Commander is operating the right. mode during play. (After about Operable distance Approx. 7 m (23 ft) (varies depending of the Cablevision 044
battery compartment. 6 Enter the component’s code number by following steps 2 to 6 of
harmful interference in a residential installation. This equipment corresponding functions of the component. 9 To call up the MENU display. 5-second rewind, replay component of each manufacturer) CBL (adaptador para cable analógico), SAT (sintonizador de Jerrold/G.I. 015
generates, uses, and can radiate radio frequency energy and, if not 1 2 “Entering the Code Number”, or steps 1 to 7 of “Searching for the
Correct Code.”
(*1EPG)
To access to all aspects of the qj
begins).
To bring up Master Guide.
*2 The operation of the built-in DVR or the video on demand.
Power requirements
Battery life
Two size AA (R6) batteries (not supplied)
Approx. 6 months (varies depending on frequency of
recepción vía satélite digital), decodificador digital, DVR
(Videograbadora digital), DVD (reproductor de discos DVD) y DAV
Motorola 015
installed and used in accordance with the instructions, may cause You can write down the code number on the label inside the use)
Panasonic 021
service. (*1Live TV) La fila izquierda de la tabla muestra la marca y la derecha muestra
harmful interference to radio communications. However, there is battery compartment lid. Dimensions Approx. 55 × 200 × 32 mm (w/h/d)
Philips 016
0 and ql To bring up Master Guide. el número de código. Pioneer 044
no guarantee that interference will not occur in a particular Operating a digital satellite receiver (2 1/4 × 7 7/8 × 1 5/16 in).
installation. If this equipment does cause harmful interference to If the Commander Doesn’t Seem to Be Working... Operating a Component N: To play.
m: To rewind.
qk To bring up the Station Index
when a program guide is not 3 To use the “FAVORITE” qf Channel up: +
Mass Approx. 95 g (3.4 oz). (not including batteries) To set a Component Code (see the instruction manual for details)
Scientific Atlanta
Zenith
014, 045
047
radio or television reception, which can be determined by turning • First, try repeating these setup procedures using the other codes M: To fast-forward. displayed. function. Channel down: – Design and specifications are subject to change without notice. Para introducir un código de componente (consulte los detalles en
the equipment off and on, the user is encouraged to try to correct the listed for your component (see the supplied “Component Code 1 Press the button of the desired component on the Commander. 4 To switch the output of the To page through the guide el manual de instrucciones)
To select the channel that is
interference by one or more of the following measures: Numbers”). Operating a TV digital satellite receiver to the when a program guide is
TV VCR CBL / SAT DVD highlighted. While pressing the SET button, press
• Reorient or relocate the receiving antenna. When to replace the batteries • If – after trying all the codes listed for your component – you still TV. (When you connect a TV displayed. The CE mark on the unit is valid only for products SAT
• Increase the separation between the equipment and receiver. 3 To operate the Picture-in- qf Channel up: + the POWER button.
Under normal conditions, batteries will last up to 6 months. If the cannot get the Commander to work properly, try the search Picture function. Press each Channel down: – *1 This key corresponds to Tivo service or the replay service. Refer to its cable or antenna to the receiver, qg To bring up the Station Index. marketed in the European Union. SET POWER
• Connect the equipment into an outlet on a circuit different from instruction manual for details. the output switches between a qh To tune to the last tuned Al tiempo que mantiene presionado el Brand Code No.
Commander does not operate properly, the batteries might be worn method described in “Searching for the Correct Code.” 2 Point the Commander directly at the component. button or combination of qg To operate SLEEP function on
that to which the receiver is connected. TV and SAT program). station. botón SET, presione el botón POWER. DirecTV Sony 001
out. Replace the batteries with new ones. buttons as described in the the TV. (Works only for a TV
• Consult the dealer or an experienced radio/TV technician for help. DirecTV 025, 041, 042
c
3 Press the button for the function you want to use. table below. with the SLEEP function). 8 To scroll through the Master qj To bring up the Master Guide.
You are cautioned that any changes or modifications not expressly Notes Searching for the Correct Code See “Remote Button Descriptions” for complete descriptions of the 4 To change the input mode. qh To operate JUMP, FLASHBACK Operating an analog cable box Guide. qk To select the channel that’s Troubleshooting TV VCR CBL / SAT DVD
Hitachi
Hughes
005
004
approved in this manual could void your authority to operate this • Replace both batteries with new ones. 6 To display the current channel or CHANNEL RETURN function qs and qd qh To operate JUMP, FLASHBACK
9 To call up the MENU display. highlighted. To bring up the c Code No. c ENT
equipment. • Do not take more than 3 minutes to replace the batteries; otherwise, buttons on the Commander. qs and qd Station Index when a program If you have problems setting up or using the Commander: Panasonic 003
If you’ve tried all the code numbers listed for your component and on TV. on the TV depending on the To change the channel. For or CHANNEL RETURN function
your setting of the code numbers will be erased. To change the channel. For guide is not displayed. • When setting up the Commander, carefully go through the procedures RCA/Proscan 002, 007
you still cannot get the Commander to work (or if your component is Notes on Using the Remote Commander 8 To move the cursor upward, setting of the TV’s example, to change to channel on the TV depending on the described in “Setting the Code.” If the code that’s listed first for your
downward, to the left, or to the manufacturer. example, to change to channel ql N: To exit the mode. Toshiba 006
not listed in the “Component Code Numbers” tables), try these Basically, use this Commander in the same way as the Commanders 5, press 0 and 5 (or press 5 and setting of the TV’s component doesn’t work, try all the codes for your component - in the order
5, press 0 and 5 (or press 5 and Dish Network JVC 010
Setting Up the Remote Commander Notes on Batteries steps. supplied with your components. right. qj To turn off the “window” picture ENT). manufacturer.
ENT). in which they’re listed. If all the codes fail to work (or if your component is DVR (Digital Video Recorder)/
• Using this Commander will not increase the functions of your 9 To call up the MENU display. or select a drive. qf Channel up: + not listed in this manual), try using the procedures in “Searching for the
• Do not mix old batteries with new ones or mix different types of 1 Power on the component you want to set up. Insert a tape or disc qs and qd qk To enter the selection. Channel down: – Correct Code.”
DVR (Videograbadora digital)
About Presetting the Commander batteries together. components. The functions of the Commander are limited to the
if necessary. functions of the components themselves. For example, if your TV To change the channel. For • Check that you’re aiming the Commander directly at the component, and that Tivo
DVD
The Commander is preset at the factory to operate Sony brand • If the electrolyte inside the battery should leak, wipe the Notes Operating a DVD
example, to change to channel there are no obstructions between the Commander and the component.
components. contaminated area of the battery compartment with a cloth and 2 While pressing the SET button, press the POWER button. does not have a MUTING function, the MUTING button on this • There may be cases you may turn on/off the cable box by pressing the CH+ or Brand Code No.
5, press 0 and 5 (or press 5 and CH– buttons on the Commander. 3 To select numbers 10 and qf CH+: To proceed to the next • Make sure the batteries you’re using are not worn out, and that they’re Brand Code No.
If you’re using the Commander with a Sony component, you won’t replace the old batteries with new ones. To prevent the electrolyte Commander will not function with your TV. Sony 017, 018, 019
3 Press the button of the component on the Commander that you ENT). • If your cable box can control volume, be sure to set its volume control to a above. For example, to select location or song. inserted correctly. Sony 001, 023, 024, 025, 030, 031, 032, 040,
need to preset the Commander before you start using it. from leaking, remove the batteries when you plan not to use the • Some functions of the component may not work with this • Check that the button of the TV, VCR, CBL/SAT, or DVD is pressed to choose Philips 020
want to set up. medium position. If the volume on the cable box is turned down completely, track 15, press PIP and then Channel up. 050
To set up the Commander to use with other (non-Sony) Commander for a long period of time. Commander. PIP operations your desired component. Aiwa 015
you will not be able to adjust your TV’s volume with the Commander. press 5. CH–: To proceed to the ReplayTV
manufacturers’ components, or to use with a component that is not 4 Press and release the CH+ button. Then press and release the • If your cable box can control volume, be sure to set its volume • Check that the component has infrared remote capability. For example, if Cyber Home 054, 055, 067
Press To 4 To change the sound. previous location or song.
preset at the factory, you’ll need to follow the instructions in this POWER button. switch to a medium position. If the volume on the cable box is your component didn’t come with a remote commander, it probably isn’t Brand Code No. Daewoo 029
turned down completely, you will not be able to adjust your TV’s PIP Turn on/off the “window” picture. 6 To show the current play status Channel down. capable of being controlled by a remote commander.
manual to preset the Commander with the correct code number for Setting the Code 5 Repeat step 4 until the correct code number is found. GUIDE Turn off the “window” picture. on the screen. qg To switch the subtitle. • Should any problem persist, reset the Commander to the factory setting by
Panasonic 021 Denon 006, 017
your components. (See the supplied “Component Code Numbers” volume with the Commander. ReplayTV 022 Emerson 051, 060, 069
Follow the steps 1 and 2 below for each component you plan to use Each time you press the CH+ button and then the POWER button, 8 To move the cursor upward, qh To display the title menu. pressing the POWER, TV/VIDEO and VOL– buttons simultaneously.
m or M Change the TV channel in the “window” picture. Harman/Kardon 018
also). with the Commander. a new code number will be transmitted. downward, to the left, or to the qj To clear the selected characters Dish Network
Keep trying until your component operates by receiving the zREC Change the input mode of the “window” picture. right. from the screen or select a Hitachi 008
x Move the location of the “window” picture.
For the customers in the U.S.A. Brand Code No. ILO 068, 071
transmitted signal from the Commander (e.g., the power turns off, 9 To display the DVD menu. drive.
Component that can be preset Button Factory setting Step 1: Entering the Code Number 0 To record, press N while qk To execute items selected from Customer Support Information JVC 035, 036 Insignia 072, 073
the CH+ function works, playback starts, etc). Be patient as you do N Swap the “main” picture and the “window” picture.
TV TV Sony TV this; it may take about 70 tries until the correct code number is X Freeze the “window” picture. pressing zREC. the screen. If – after you’ve read through this manual – you still cannot get the JVC 007, 037
1 See the supplied “Component Code numbers”, and find the three- First release N, then release ql N: To play. Remote Commander to work properly, call the Sony Customer DirecTV KLH 010
VCR VCR Sony VHS VCR digit code number for the desired component. located.
zREC. m: To rewind. Support Helpline at 1-800-822-2217. Brand Code No. Magnabox 059, 066
Analog cable box/Digital cable box/ CBL/SAT — If more than one code number is listed, use the number that’s 6 When the correct code is found, press the ENT button to store the qs Number buttons : To set items M: To fast-forward. Onkyo 016
DirecTV 037
Digital satellite receiver/DVD/TV/ DVD listed first to complete the steps below. code number in the Commander’s memory. Operating a VCR selected from the screen. x: To stop. Orion 052, 058
Sony DVD player For example, if you’re setting up a Philips’ VCR, you would use
VCR/Digital video recorder/DAV qd To enter the setting. To set X: To pause. Panasonic 002, 006, 027, 028, 034, 035, 036, 042,
the code number 035. 7 Check that the Commander is operating the other functions of 4 To switch the antenna output. qs and qd items selected from the screen. 045, 053
If your component isn’t listed, see “Searching for the Correct your component by pressing the corresponding buttons on the 6 To expose the on-screen To change the channel. For DAV (DVD/Amplifier) Philips 012, 062
Notes Commander. If they seem to be working properly, you’re done
Code.” display. example, to change to channel Pioneer 004, 019, 021, 033, 063, 064
• The Commander can be set up to operate only one component per setting up the Commander. 8 To move the cursor upward, 5, press 0 and 5 (or press 5 and
DAV (DVD/amplificador) RCA 005
button – unless their code numbers happen to be the same. For 2 While pressing the SET button, SET POWER If the component does not operate properly, repeat steps 1 to 6 and downward, to the left, or to the ENT). Brand Code No. Samsung 014, 041, 070
example, you cannot set up the Commander to operate a Sony TV press the POWER button. right. qf Channel up: + Sony 001, 002, 003, 004, 005 Sanyo 057
and a Panasonic TV simultaneously (because they use different search for another code.
9 To call up the MENU display. Channel down: – Bose 012 Sharp 011, 048
code numbers). 3 Press the button of the TV VCR CBL / SAT DVD If you still cannot get the Commander to work properly, see q; and ql qg To change the input mode. Insignia 015 Shinco 022
• You may not be able to operate even a Sony brand component with component that you want to set “Troubleshooting.” N: To play. qj To select a drive. JVC 007 Symphonic 060, 061
the factory presetting. In such a case, follow the procedure in up. x: To stop. qk To enter the selection. Sylvania 020, 044, 049
LG 014, 016
“Setting the Code.” m: To rewind. Terapin 056
Note M: To fast-forward.
Onkyo 009
Panasonic 006 Thomson 013
On the CBL/SAT and DVD buttons, “cable box”, and “DVD player” zREC: To record, press N
Samsung 008 Toshiba 003, 038, 039, 046, 065
are assigned respectively at the factory. But you can also assign other while pressing zREC.
Sharp 010 Yamaha 006
components on these buttons. For details, see “Changing the
Yamaha 011 Zenith 009, 047
Component Type on the CBL/SAT and DVD buttons.”
Zenith 013
Continued on reverse side / Continúa en el reverso
Brand Component Code No. Español Paso 2: Comprobación del funcionamiento de un Control de un videograbadora (VCR) Control de un decodificador digital Control de un DAV (combinación de DVD/receptor)
TV/VCR/COMBO Magnavox VCR 013, 011, 012, 010, 063, 073
Colocación de las pilas Cambio del tipo de componente de las Descripción de las teclas del telemando
número de código 3 Utilizar la función “FAVORITE”. qs y qd
Brand Component Code No.
TV 011, 012, 013, 003, 043, 047, 083, 084, 085 Antes de reemplazar las pilas, tenga unas nuevas preparadas. teclas CBL/SAT y DVD 4 Para cambiar la salida de antena. qs y qd
4 Cambiar la salida del receptor Cambiar el canal.
3 Para seleccionar el número 10 o qd Para introducir el ajuste.
Sony VCR (VTR1:Betamax) 001
TV/VCR COMBO TV011, 018, 047&VCR012, 013,
TV083&VCR073
Para los clientes de EE. UU. Deslice y abra el compartimiento de las pilas, e inserte dos pilas de
1 Conecte la alimentación del componente que desee ajustar. En la fábrica “adaptador para cablevisión” se ha asignado a la tecla General
6 Para hacer que se visualicen las
indicaciones en pantalla.
Para cambiar el canal. Por
ejemplo, para cambiar al canal 5, SAT al televisor (al conectar un Por ejemplo, para cambiar al canal
superior. qf CHANNEL+: memorización o
cable de televisor o una antena al 4 Para cambiar el modo de entrada. cambio a una
VCR (VTR2:8mm) 002 tamaño AA (R6) (no suministradas). 2 Apunte con el telemando hacia el componente y presione una CBL/SAT y el “reproductor de discos DVD ” en la tecla DVD. Al 1 Para configurar telemond, pulse 8 Para mover el cursor hacia arriba, presione 0 y 5 (o presione 5 y 5, presione 0 y 5 (o bien, presione
Marantz VCR 017, 039, 040
ADVERTENCIA
SET POWER
receptor, la salida alterna entre los 5 VOLUME+: para aumentar el frecuencia superior: +.
VCR (VTR3:VHS) 003 Cerciórese de alinear + y – de las pilas con + y – del compartimiento tecla para comprobar si trabaja. realizar el procedimiento siguiente es posible cambiar este ajuste de TV VCR CBL / SAT DVD
SET manteniendo presionado hacia abajo, hacia la izquierda, o ENT). 5 y ENT).
TV 024 volumen (DAV). CHANNEL–: memorización o
Este equipo ha sido probado y se ha encontrado que cumple con los forma que pueda ajustar cualquier componente con estos botones. POWER. hacia la derecha. qf Para pasar a canales superiores: + programas de TV y los de SAT). qf CH+: Canal siguiente.
VCR (VTR4:DV) 004 Marta VCR 035 de las mismas. Por ejemplo, presione la tecla POWER para ver si trabaja en su VOLUME–: para reducir el cambio a una
1 2 3 2 Teclas selectoras de 9 Para invocar la visualización de Para pasar a canales inferiores: – 6 Encender la pantalla. CH–: Canal anterior.
VCR (VTR5:DV) 005 Memorex VCR 012, 038, 077 límites para dispositivos digitales de Clase B, de acuerdo con la Parte componente. volumen (DAV). frecuencia inferior: –.
1 Al tiempo que mantiene presionado el botón SET, presione el 8 Para mover el cursor hacia arriba,
VCR (VTR6:DV) 006 Minolta VCR 008, 007 15 de las normas de la FCC. Estos límites han sido diseñados para 1 2 3 Compruebe si las otras teclas del telemando controlan las botón POWER.
4 5 6 componentes. Para cambiar a
las operaciones de cada
MENU.
q; y ql
qg Cambio del modo de entrada.
qj Para seleccionar una unidad. hacia abajo, hacia la izquierda, o
qg Salir del menú de ajustes.
qh Activar la pantalla de un menú
6 Para mostrar en la pantalla el
estado de reproducción actual.
qg Para cambiar el subtítulo.
TV 001 Mitsubishi/MGA VCR 026, 027, 028, 029, 056, 057, 065, 059 proporcionar una protección razonable contra interferencias 7 8 9 VCR (Videograbadora): qk Para introducir la selección. hacia la derecha. contextual. qh Para visualizar el menú principal.
funciones correspondientes del componente. 2 Presione la tecla CBL/SAT o DVD. componente, presione la tecla 7 Para silenciar el volumen. Vuelva qj Para cambiar el sonido.
Abex TV 101 TV 024, 003, 012, 066 perjudiciales en una instalación residencial. Este equipo genera, N: Para reproducir. 9 Invocar la pantalla de MENU. qj Invocar la barra de títulos y
PIP 0 ENT a la que haya asignado el a presionarla para desactivar el qk Para introducir la selección de la
Admiral VCR 030 Multitech VCR 028, 041, 024 utiliza, y puede radiar energía de radiofrecuencia y, si no se instala y 3 Presione y suelte la tecla x (parada). x: Para parar. 0 y ql activarla o desactivarla en modo
Usted podrá escribir el número de código en la etiqueta del VOL CH
componente. *2N: Reproducir. modo de silencio. pantalla MENU.
utiliza de acuerdo con las instrucciones, puede causar interferencias
TV / VIDEO
TV 002, 014, 009, 099, 116 NEC VCR 017, 039, 040 m: Para retroceder. CABLE.
interior de la tapa del compartimiento de la batería. 5 Para aumentar el volumen: + *2m: Rebobinar. 8 Para mover el cursor hacia arriba, ql N: Para reproducir.
Advent TV 118 TV 003, 012 perjudiciales en las radiocomunicaciones. Sin embargo, no existe 4 Presione y suelte una de las teclas siguientes; DISPLAY
M: Para avanzar qk Para activar el Índice de la
hacia abajo, hacia la izquierda o
Para reducir el volumen: – *2M: Avanzar. estación si no se está mostrando m: Para retroceder.
Adventura TV 104 Olympic VCR 012, 011 ninguna garantía de que tales interferencias no se produzcan en una rápidamente. hacia la derecha.
Si el telemando parece que no trabaja... 1 para asignar una videograbadora
SLEEP
7 Para silenciar el volumen del *2zREC: Para grabar, presione una guía de programas. M: Para avanzar
Aiwa VCR 041, 050, 035 Optimus VCR 027 instalación particular. Si este equipo causa interferencias zREC: Para grabar, presione N 9 Para invocar la pantalla MENU.
2 para asignar una unidad DAV MUTING RECALL
televisor. Nmientras mantiene rápidamente.
TV 110 • En primer lugar, repita estos procedimientos de programación manteniendo presionada Para salir del menú de ajustes.
Orion VCR 055, 072 perjudiciales, lo que podrá determinarse desconectando y volviendo Cuándo reemplazar las pilas 3 para para asignar un sintonizador de recepción vía satélite qa Para conectar y desconectar la presionado zREC. qa Para activar/desactivar la x: Para parar.
Akai VCR 052, 053, 054 utilizando los otros códigos de la lista para su componente zREC.
alimentación. X: Para realizar una pausa.
TV 082, 087 a conectar su alimentación, se ruega que el usuario corrija las En condiciones normales, las pilas durarán hasta 6 meses. Si el digital, adaptador para cable digital, o una videocámara digital alimentación del componente Primero suelte N,
TV 003 (consulte las tablas de “Números de código de componentes”). qs Botones numéricos: para ajustar
TV/VCR COMBO TV087&VCR072 interferencias tomando una o más de las medidas siguientes:
MENU GUIDE OK