Professional Documents
Culture Documents
With its large 15-inch touch screen, The software enables the machine
its 2D graphic interface and its manufacturers to configure the
simple keyboard with large keys, axes, inputs/outputs and auxiliary
this compact numerical control functions according to their needs.
gives the operator more power
and efficiency to control his ModEva Pac is fully compatible
machine, and at the same time a with our DNC 880S and 880 or
sense of easiness and comfort. DNC 80, making it an ideal control
for retrofitting old machines.
The basic functions are accessible
by 6 subject-oriented keys giving ModEva Pac is integrated into a
access to clearly and logically sleek and modern housing, or can
designed menu pages. The optionally also be delivered as a
bending solutions are displayed robust panel.
Improved usability thanks to Installation of any remote control Conversion Inch/mm, TON/
the latest software version, who software – free or licensed – of the TONS etc.
makes use of all the inherent manufacturer’s choice is allowed Force depending of sheet posi-
simplicity and user-friendliness of on the NC. tion.
the touch screen. Large function Measurement of speed, stop-
buttons, vivid colors and pop-up ping time and leakage of the
numerical pads with large keys all beam.
make for a more productive user Management of CE safety cy-
experience. Beam functions cles.
Interactive display of safety utili-
Easy Indexing function, comprising ties and customized messages.
the capacity to determine if index
is passed or not, and consequently
TouchProfile function inform the operator to move the
beam down. The capacity to de- Memory capacity
Intuitively drawing a profile on termine if beam is desynchronized
the screen for fast and precise (with 2 switches directly connected Infinite number of programs,
2D program creation. Adjusting to the NC) at start up, and accord- which can be saved in NC mem-
the dimensions is easily done ingly asks the operator to press ory or directly in Windows®.
by touching the desired angle or foot pedal until the beam is parallel Infinite number of sequences
length and introducing its value again. per program.
on a pop-up numerical pad with Infinite number of punches.
large keys. Infinite number of dies.
5 Materials.
12 Back-gauge configurations.
Sept
© Cybelec S.A. 2015 2015 1/4
V2.1
Axes and bending functions
The elements listed hereafter are available and can be configured in all numerical controls supplied with
standard software (within the number of axes and inputs/outputs available).
Y1 - Y2 : Synchronized axes for Voltage output 0-10 VDC to adjust Configurable auxiliary functions
the beam (servo-valves, propor- the hydraulic crowning. Dynamic (number eventually limited ac-
tional valves). If a current output correction of the bending table, the cording to the type of function and
is needed, the MSV 402 (see Ac- beam and axis R position. Calculat- management). 24 VDC voltage or
cessories) becomes necessary. ed not only in relation with force, logical order outputs, with or with-
X, X1, X2, X5, X6 : Main back but also with sheet width. If current out position control by means of a
gauge axes. control is desired, the MVP 100 potentiometer transducer. Special
X1 ABS, X2 REL : Secondary (see Accessories) is the solution. controls for gauge fingers, bending
back gauge axes in absolute or aids, die movements.
relative mode, generally used
for motorized finger gauge.
Z, Z2, Z5, Z6 : Axes for left/right
movement of the back gauge. Angle protractor
Possibility to program a position Lazer Safe PCSS interface
clearing movement (“retraction”) Y1, Y2 and crowning corrections
in Z-axis for faster bending calculation based on the measure Allows selecting the safety mode,
cycles. of up to 3 angles on the bend. Free and checking the Lazer Safe’s
R, R2, R5, R6 : Back gauge interface for RS232 or wireless PCSS status and log file.
height-adjustment axes. communication between Mitutoyo
M1, M2 : Axes for the adjust- angle protractor (not included) and
ment / movement of the die. the NC. Uses a receiver with IBRit-
Rf1 type USB interface.
Conical folds
Software options
Special axes Message interpreter Bending aids
X3, X4, X7, X8, Z3, Z4 : front Allows remote control of the NC Management of conventional
gauge axes. with commands sent in a file via bending aids, or of simplified
H, H2 : rear sheet support axes Network or RS232. Generally used mechanic bending aids with 2 axes
(not calculated). for interfacing with robots, bar (AP and H) interpolated with the
H3, H4 : calculated front sheet code readers, etc. beam.
support axes.
Tandem operation
Sept
2015 2/4 © Cybelec S.A. 2015
V2.1
Software options ordering informations
Technical characteristics
Sept
© Cybelec S.A. 2015 2015 3/4
V2.1
Dimensions
Ø9 Ø 65
R3.5
35
27.5
" 15.5
15
R6
30
0 R6.75
Ø7
550
PgDn 4 5 6
23
27.5
Del End
1 2 3
+
- 0
35
Shift Ctrl Alt
R4.5
52
47.5
35
35
47.5
66
23
83
Panel version TOP
531.5
526
471.5
"
15
12 x Ø 4
519
266.5
550
1 2 3
+
- 0 7
Shift Ctrl Alt 0
0
7.5
48.6
189.5
330.4
371.5
379
BOTTOM
395
Accessories
Ordering information
Available models
Number of axis
Version S-MOD-PAC4PS/BW
(Box or Panel) S-MOD-PAC4PS/P
S-MOD-PAC7PS/BW
S - MOD - PAC 7P S/ BW S-MOD-PAC7PS/P