Professional Documents
Culture Documents
P Tools e
P Tools e
Overview
Lances · Guns · Nozzle Carrier Heads · Applications
WOMA designs, manufactures and Tool programme: 왘 Hydraulically driven rotating nozzle
markets high-pressure water tools for 왘 Rotating high-pressure water jetting carriers for operating pressures
cleaning, decoating, decontamination, lances for operating pressures up up to 1,400 bar for heavy hydro-
paint stripping, surface preparation, to 3,000 bar for manual cleaning of demolition.
cutting and demolition. The high- tube bundles. 왘 Tank cleaning devices with nozzle
pressure water tools are suitable for
왘 Electrically or pneumatically operated carrier heads rotating in two planes
manual applications (for jet reaction
high-pressure water jetting guns for for internal cleaning of containers,
forces lower than 250 N) as well as
operating pressures up to 3,000 bar. vessels and autoclaves.
for applications in mechanized devices
왘 Ultra-high pressure water jetting 왘 Pipe cleaning devices for mechanized
and in automated or manipulator-
tools for operating pressures up to cleaning and decoating of internal
guided systems. WOMA’s high-pressure
3,000 bar for emission-free surface pipeline walls.
water tools meet the requirements of
the “Richtlinien für Flüssigkeitsstrahler” preparation including vacuum 왘 On-site abrasive-water jet cutting
ZH 1/406, October 1987. recovery of the removed material tools for operating pressures
and the water. up to 3,000 bar for cutting steel
왘 Self propelling rotating nozzle carrier and reinforced concrete structures.
heads for operating pressures up 왘 High-pressure water tools
to 3,000 bar for surface preparation, for manipulator- or robot-
partly magnetically braked. controlled systems.
왘 Pneumatically driven rotating nozzle 왘 Exclusively designed
carrier heads for operating pressures tools as requested by
up to 3,000 bar for surface pre- customers.
paration and heavy coating removal.
Pneumat
abrasive-water
type Eco To
demolishing s
inforced concret
ically driven
r jetting tool
op Cutter for
steel and re-
te structures
왘 Rehabilitation of structures
and buildings
왘 Maintenance of heavy
technical equipment
왘 Environmentally friendly
surface preparation
WOMA’s high-pressure guns can be Gun components: 5 – Self propelling rotating nozzle
run with operating pressures 1 – Body support carrier heads
up to 3,000 bar. Due to the WOMA 2 – Standard hand grip 6 – Pneumatically driven
Component-System the guns can 3 – Remote control adapter lead-through
be suited ideally for any problem that (here: electrically) 7 – Externally driven rotating
needs to be solved. 4 – Pressure housing nozzle carrier heads
2 6
7
1
4
7
7
5 7
3 7
5 7
High-pressure gun with single nozzle type Form 8 for paint High-pressure gun with self propelling rotating nozzle
stripping of steel girders carrier head type TD 2100 for derusting of steel panels
Estimation of Back Thrusts
SI-units:
Back-thrust in N = 0.233 · Effective volume flow rate in l/min · 앀Operating pressure in bar
US-units:
Back-thrust in lb = 0.052 · Effective volume flow rate in US gal/min · 앀Operating pressure in psi
Operating pressure in bar (1 bar = 14.5 psi)
500
3,000
2,500
2,000
1,250
1,000
750
400
300
200
1,400
350
300
fixed tool
Back thrust in N (1 N = 0.102 kgf)
250
200