Professional Documents
Culture Documents
Since there is tensile stress in frequent load combination, as per Clause 5.3.2.5 of IRC:112-2011, fatigue check is
carried out.
As per ANNEXURE A-1 of IRC:112-2011, clause A1-4 (2) for limit state of fatigue, "Specialist literature or internat
may be referred for the same"
Clause 6.8.5 Verification of fatigue resistance using damage equivalent stress range
(3) For reinforcing or prestressing steel and splicing devices adequate fatigue resistance shall
be assumed if the Expression below is satisfied:
istance shall
N, NN.2.1 (102)
N, NN.2.1 (103)
prestressing strands)