Professional Documents
Culture Documents
Page 1
MovingCoilGalvanometer-PhysicsProject
Acknowledgement:-
The success and final outcome of this project required
a lot of guidance and assistance from many people. I
am extremely privileged to thanks Mr.H.M.Shukla Sir
(Subject Teacher) for providing me an opportunity to
do the project work and giving me all support and
guidance which made me complete the project
appropriately. He was always supportive and
inspirational for completing this project. I am also
extremely thankful to all my friends for providing me
all the necessary support and guidance.
Page 2
MovingCoilGalvanometer-PhysicsProject
Objective
To study the basic schematic structure of a
moving coil galvanometer and the basic
process underlying the conversion of a
moving coil galvanometer into an ammeter
and a voltmeter.
Page 3
MovingCoilGalvanometer-PhysicsProject
Contents
• Basics about magnetic effects of current and magnetism
• Torque on a current carrying coil placed in a magnetic field
• Brief introduction into the different types of Galvanometers along
with brief description
• General structure of a moving coil galvanometer
• Conversion of a Galvanometer into an Ammeter
• Conversion of a Galvanometer into a Voltmeter
Page 4
MovingCoilGalvanometer-PhysicsProject
Basics about Magnetic Effects of Current and Magnetism:-
Introduction:-
Electromagnetism: The branch of physics which deals with interaction of electric current or
fields and magnetic fields.
Magnetic field: A region of space near a magnet, electric current or moving charged particle in
which magnetic effects are exerted on any other magnet, electric current, or moving charged
particle. It is also known as magnetic flux density or magnetic induction or magnetic field.
Oersted’s Discovery:-
The relation between electricity and magnetism was discovered
by Oersted in 1820. Oested showed that the electric current
through the conducting wire deflects the magnetic needle held
near the wire. On increasing the current in conductor or bringing
the needle closer to the conductor, the deflection of magnetic
needle increases.
The magnetic field (marked B, A magnet at rest produces a magnetic field around it while an indicated by field
lines) around wire carrying an electric current (marked I). electric charge at rest produces an electric field around
it.
Page 5
MovingCoilGalvanometer-PhysicsProject
Page 6
MovingCoilGalvanometer-PhysicsProject
Biot-Savart’s Law:-
With the help of experimental results, Biot and Savart arrived at a mathematical expression that
gives the magnetic field at some point in terms of the current that produces the field.
Page 7
MovingCoilGalvanometer-PhysicsProject
o Field lines never intersect each other.
Quick Fact: Magnetic Resonance Imaging (MRI) machines generate a field 60,000 times as intense
as the earth’s to vibrate the hydrogen atoms in our body; in response, the atoms emit radio waves
that are analyzed to produce a map of our insides.
Magnetic Force:-
1. The force is perpendicular to both the velocity v of the charge q and the magnetic field B.
2. The magnitude of the force is F = qvB sinθ where θ is the angle <180 degrees between the
velocity and the magnetic field. This implies that the magnetic force on a stationary charge or
a charge moving parallel or antiparaller to the magnetic field is zero.
3. The direction of the force is given by the left hand rule. The force relationship above is in the
form of a vector product.
When current flows through a conducting wire, and an external magnetic field is applied across that flow, the conducting
wire experiences a force perpendicular both to that field and to the direction of the current flow (i.e they are mutually
perpendicular) .
The Thumb represents the direction of Motion resulting from the force on the conductor
The First finger represents the direction of the magnetic Field The Second finger represents the
direction of the Current.
Page 8
MovingCoilGalvanometer-PhysicsProject
Fleming’s Left Hand Rule to find the direction of force (movement) on a
moving charged particle (or current carrying conductor) placed in
Magnetic Field.
This diagram illustrates how to find out the direction of force on a charged particle moving in a
region of magnetic field. This method is based on the vector product of two vectors where the
resultant vector is perpendicular to the plane containing both vectors.
Page 9
MovingCoilGalvanometer-PhysicsProject
Lorentz Force:-
When a charge is moving in a region, where
both electric field and magnetic field having
magnitudes E and B respectively exist, then
electric and magnetic forces are acting on it.
The resultant of these forces is called
electromagnetic force or Lorentz force on
charge.
Magnetic Moment:-
Magnetic moment of a bar magnet is
defined as a vector quantity having
magnitude equal to the product of pole
strength (m) with effective length (l) and
directed along the axis of the magnet
from South to North pole.
Page 10
MovingCoilGalvanometer-PhysicsProject
Magnetic Moment of a current carrying coil (loop): A current carrying coil behaves like a
magnetic dipole. The face of coil in which current appears to flow anticlockwise acts as North
Pole while
face of coil in
which
current
appears to
flow clock
wise acts as
South Pole.
Page 11
MovingCoilGalvanometer-PhysicsProject
A loop of geometrical area ‘A’, carries a current ‘I’, then magnetic moment of coil M=IA
A coil of ‘N’ turns, geometrical area ‘A’, carries a current ‘I’, then magnetic moment M=NIA
Page 12
MovingCoilGalvanometer-PhysicsProject
TYPES OF GALVANOMETERS:-
o Tangent Galvanometer:- It works by using a compass needle to compare the magnetic field
generated by an unknown current to the magnetic field of the Earth. It was used earlier. It was first
given by Claude Pouillet. It contains an insulated copper wire coil on a non-magnetic circular frame.
o Astatic Galvanometer:- It does not use the Earth’s magnetic field for measuring the current. It was
developed by Leopoldo Nobili. It contains two magnetized needles that run parallel to each other,
suspended by a silk thread, with their magnetic poles reversed. The lower needle gets deflected by
the passing current’s magnetic field. The second needle cancels out the dipole movement of the first
one to cancel out the effects of Earth’s magnetic field.
o Mirror Galvanometer:- It is used to achieve higher sensitivity for detecting extremely small
currents. It contains horizontal magnets which are suspended from a fine fiber inside of the vertical
coil, with an attached mirror to its magnets. A beam of light reflects from the mirror acts as a long
mass-less pointer by falling on a graduated scale across the room.
Page 13
MovingCoilGalvanometer-PhysicsProject
o Ballistic Galvanometer:- It is sensitive in mature and used to measure the quantity of charge that
is discharged through it. The moving part of the galvanometer has a large moment of inertia, giving
it a long oscillation period. It may be of the moving coil type or of the moving magnet type.
Principle:-
When a current carrying coil is suspended in a uniform magnetic field it is acted upon by a torque.
Under the action of this torque, the coil rotates and the deflection in the coil in a moving coil
galvanometer is directly proportional to the current flowing through the coil.
Page 14
MovingCoilGalvanometer-PhysicsProject
Construction:-
Schematic
Diagram of a Moving Coil Galvanometer
Working:-
When a current flows through the coil, a torque acts on it. This torque is given by the equation
where the symbols have their usual meaning. Since the field is radial by design, we
have taken in the above expression for the torque. The magnetic torque
tends to rotate the coil. A spring Sp provides a counter torque that balances the magnetic
torque ; resulting in a steady angular deflection . In equilibrium, = where
is the torsional constant of the spring; i.e. the restoring torque per unit twist. The deflection is
indicated on the scale by a pointer attached to the spring. We have
The quantity given in brackets is a constant for the galvanometer. Hence, Galvanometer Constant
G can be expressed as:-
Page 15
MovingCoilGalvanometer-PhysicsProject
So, the current through the coil varies linearly with the deflection and so, the current flowing
through the coil can be known by measuring the deflection.
The galvanometer can be used as a detector to check if a current is flowing in the circuit (this
configuration is used in the Wheatstone’s bridge arrangement). In this usage the neutral position
of the pointer (when no current is flowing through the galvanometer) is in the middle of the
scale and not at the left end. Depending on the direction of the current, the pointer deflection
is either to the right or the left.
Quick Fact: Greek scientist, Archimedes was the first person to have made use of magnets. The
story goes that he enabled enemy ships to sink by using lodestone to pull out the iron nails used
in the ship's body.
Page 16
MovingCoilGalvanometer-PhysicsProject
Increasing the area of the coil A. But it will make the galvanometer bulky and
ultimately less sensitive.
Decreasing the value of restoring force constant k by using a flat strip of phosphor –
bronze instead of circular wire of phosphor – bronze. Quartz fibers can also be used
for suspension of the coil because they have large tensile strength and very low
value of K.
Voltage Sensitivity of Galvanometer:-
The voltage sensitivity of a galvanometer is defined as the deflection per unit voltage.
An interesting point to note is that, increasing the current sensitivity does not necessarily,
increase the voltage sensitivity. When the number of turns (n) is doubled, current
sensitivity is also doubled (equation 1). But increasing the number of turns
correspondingly increases the resistance (G). Hence voltage sensitivity remains
unchanged.
Page 17
MovingCoilGalvanometer-PhysicsProject
The sensitivity of the galvanometer can be increased by increasing N, B and A while decreasing
the value of k.
Page 18
MovingCoilGalvanometer-PhysicsProject
Conversion of a Galvanometer to an
Ammeter and a Voltmeter:-
Conversion of a Galvanometer into an Ammeter:-
The galvanometer cannot as such be used as an ammeter to measure the value of the current in a
given circuit. This is for two reasons: (i) Galvanometer is a very sensitive device, it gives a fullscale
deflection for a current of the order of µA. (ii) For measuring currents, the galvanometer has to be
connected in series, and as it has a large resistance, this will change the value of the current in the
circuit. To overcome these difficulties, one attaches a small resistance S, called shunt resistance,
in parallel with the galvanometer coil; so that most of the current passes through the shunt.
The value of shunt resistance depends on the fraction of
the total current required to be passed through the
galvanometer. Let I g be the maximum current that can be
passed through the galvanometer. The current I g will give
full scale deflection in the galvanometer.
Galvanometer Resistance = G
Shunt Resistance = S
Current in the circuit = I
Since the galvanometer and the shunt resistance are connected in parallel, the potential
difference across both of them is same.
Page 19
MovingCoilGalvanometer-PhysicsProject
The effective resistance of the ammeter Ra is (G in parallel with S):-
Ra is very low and this explains why an ammeter should be connected in series. When
connected in series, the ammeter does not appreciably change the resistance and current
in the circuit. Hence an ideal ammeter is one which has zero resistance.
Voltmeter is an instrument used to measure potential difference between the two ends of a
current carrying conductor. A galvanometer can be converted into a voltmeter by connecting a
high resistance in series with it. The scale is calibrated in volt.
Galvanometer Resistance = G
Range of Voltmeter = V
Since R is connected in series with the galvanometer, the current through the galvanometer,
From the equation the resistance to be connected in series with the galvanometer is calculated.
The effective resistance of the voltmeter is:-
+𝐺
Page 20
MovingCoilGalvanometer-PhysicsProject
Rv is very large, and hence a voltmeter is connected in parallel in a circuit as it draws the least
current from the circuit. In other words, the resistance of the voltmeter should be very large
compared to the resistance across which the voltmeter is connected to measure the potential
difference. Otherwise, the voltmeter will draw a large current from the circuit and hence the
current through the remaining part of the circuit decreases. In such a case the potential difference
measured by the voltmeter is very much less than the actual potential difference. The error is
eliminated only when the voltmeter has a high resistance. An ideal voltmeter is one which has
infinite resistance.
Page 21
MovingCoilGalvanometer-PhysicsProject
BIBLIOGRAPHY
Page 22
MovingCoilGalvanometer-PhysicsProject