Professional Documents
Culture Documents
DQ-MI-DT_ver_01
Nome File:
DriverConfiguration_01-00.doc
Configuration
Data 03/06/13
procedure
Pag. 1 of 6
THIS DOCUMENT IS THE PROPERTY OF SYSNET TELEMATICA S.R.L. IT IS PROTECTED UNDER THE APPLICABLE LAW ON COPYRIGHT AND INDUSTRIAL PROPERTY, IT
MAY NOT BE COPIED, THE DELIVERY OR OTHERWISE DISTRIBUTION WITHOUT THE PRIOR WRITTEN CONSENT OF SYSNET TELEMATICA S.R.L; ANY INFRINGEMENT
WILL BE PURSUED BY LAW.
DG-DT_MOXA-NPORT-
MOXA NPort Driver
DQ-MI-DT_ver_01
Nome File:
DriverConfiguration_01-00.doc
Configuration
Data 03/06/13
procedure
1 S COPE
This document describes the procedure to configure the serials on a PC or server for MOXA NPort drivers.
2 R EQUESTS
To install the MOXA NPort drivers are need:
A PC or server with Windows Xp or superior.
The drivers (downloadable on MOXA site). The files are:
o Driver for Windows: drvmgr_setup_Ver1.17_Build_13020109_whql.zip
o Tools: nploc_setup_Ver1.13_Build_12021410.zip
Pag. 2 of 6
THIS DOCUMENT IS THE PROPERTY OF SYSNET TELEMATICA S.R.L. IT IS PROTECTED UNDER THE APPLICABLE LAW ON COPYRIGHT AND INDUSTRIAL PROPERTY, IT
MAY NOT BE COPIED, THE DELIVERY OR OTHERWISE DISTRIBUTION WITHOUT THE PRIOR WRITTEN CONSENT OF SYSNET TELEMATICA S.R.L; ANY INFRINGEMENT
WILL BE PURSUED BY LAW.
DG-DT_MOXA-NPORT-
MOXA NPort Driver
DQ-MI-DT_ver_01
Nome File:
DriverConfiguration_01-00.doc
Configuration
Data 03/06/13
procedure
3 P ROCEDURE
1. Copy the drivers on the PC and install them.
2. Install both files with normally procedure.
3. The Tools software permits to detect the NPort devices into the network independently by the network
configuration. This software will be used when the network is installed.
4. The drivers packet installs the “NPort Windows Driver Manager” application. Start it.
6. Press [Browse] button. In the new window find and select the file “NPORT_SerialMap.ini”. Press [Open].
Pag. 3 of 6
THIS DOCUMENT IS THE PROPERTY OF SYSNET TELEMATICA S.R.L. IT IS PROTECTED UNDER THE APPLICABLE LAW ON COPYRIGHT AND INDUSTRIAL PROPERTY, IT
MAY NOT BE COPIED, THE DELIVERY OR OTHERWISE DISTRIBUTION WITHOUT THE PRIOR WRITTEN CONSENT OF SYSNET TELEMATICA S.R.L; ANY INFRINGEMENT
WILL BE PURSUED BY LAW.
DG-DT_MOXA-NPORT-
MOXA NPort Driver
DQ-MI-DT_ver_01
Nome File:
DriverConfiguration_01-00.doc
Configuration
Data 03/06/13
procedure
Pag. 4 of 6
THIS DOCUMENT IS THE PROPERTY OF SYSNET TELEMATICA S.R.L. IT IS PROTECTED UNDER THE APPLICABLE LAW ON COPYRIGHT AND INDUSTRIAL PROPERTY, IT
MAY NOT BE COPIED, THE DELIVERY OR OTHERWISE DISTRIBUTION WITHOUT THE PRIOR WRITTEN CONSENT OF SYSNET TELEMATICA S.R.L; ANY INFRINGEMENT
WILL BE PURSUED BY LAW.
DG-DT_MOXA-NPORT-
MOXA NPort Driver
DQ-MI-DT_ver_01
Nome File:
DriverConfiguration_01-00.doc
Configuration
Data 03/06/13
procedure
4 N OTES
The COM configuration must be equal on driver, NPORT, user terminal and on external device connected
to NPORT.
To change the virtual COM configuration or delete it select the COM and press “Remove”, and “Apply”.
This operation MUST be run with the COM ports closed (terminals OFF). If the operation fails (the apply
window remains stopped for some minutes), it must reboot Window and rerun the operation.
If the antivirus is installed, its should be stopped or the its configuration shouldn’t run on the virtual
ports.
If the firewall is enabled, the virtual ports must be ignored. It’s highly recommended to turn off the
firewall.
Pag. 5 of 6
THIS DOCUMENT IS THE PROPERTY OF SYSNET TELEMATICA S.R.L. IT IS PROTECTED UNDER THE APPLICABLE LAW ON COPYRIGHT AND INDUSTRIAL PROPERTY, IT
MAY NOT BE COPIED, THE DELIVERY OR OTHERWISE DISTRIBUTION WITHOUT THE PRIOR WRITTEN CONSENT OF SYSNET TELEMATICA S.R.L; ANY INFRINGEMENT
WILL BE PURSUED BY LAW.
Sysnet Telematica S.r.l.
Viale Berbera, 49 – 20162 – Milano (Italy)
phone. +39.02.64.73.021 – fax. +39.02.64.37.637
www.sysnettelematica.it – info@sysnettelematica.it
Technical support
phone. +39.02.66.105.111 – fax. +39.02.66.100.363
support@sysnettelematica.it