Professional Documents
Culture Documents
Gear Box Productivity 30 To 33 Nos Per Hour
Gear Box Productivity 30 To 33 Nos Per Hour
30
25
20
15
10
5
0
Baseline Optimize Robot sprayer Internal and Shots to be As per NADCA Achieved
Machine Optimization External spray increased to Output
Parameter optimization meet NADCA
Ideas
1. To increase the effectiveness of heat transfer at bottom/side core by modifying the internal cooling design in CFT.
2.Reduce heat check mark in high temp. spots by introducing loose pieces wherever required.
NADCA STANDARD.
NADCA Cycle time =26.90 + (0.0365 * Machine Locking Force in Tons)
=26.90+(0.0365*2000)
=100 sec 36 shots/Hour
Considering 90 % Of NADCA Cycle time we should achieve 33 shots/Hour
We Planning to achieve Cycle time by New Innovation and ideas In Future
Kaizen Theme: Kaizen Start : 23.01.2019 M.Gopi, Sivanesan, Raymond furdato, Srinath,
Praveen, Aravind, Dharani Babu
To Improve Productivty in Gear Box housing Kaizen Finish : 19.02.2019
1. To increase the effectiveness of heat transfer at bottom/side core by modifying the Detection Warning
New Ideas to reach 100 internal cooling design in CFT. Control
% Nadca Cycle time 2.Reduce heat check mark in high temp. spots by introducing loose pieces wherever
1
required.