Professional Documents
Culture Documents
Thus a trainee can easily locate any section & components for the study. PCB.
3 Year Warranty
} Sweep Output : 5 V approximately
Oscilloscope Demonstrator / Trainer Scientech 2001E
Trigger System Calibrator : Square Wave generator 1 KHz
Modes : Auto / Level approximately, 0.2 V ±1 % for
probe compensation.
Source : CHI, CH II, Ext.
Z Modulation : TTL level
Slope : Positive or Negative
Trace rotation : Adjustable on front panel
Coupling : AC, TV
Test Points : 72 Nos
Sensitivity : Int 0.5 div., Ext 0.8 V
approximately Fault Creation : 15 Faults can be created
Trigger Bandwidth : 25 MHz Stabilized Power Supply : All operating voltages including
EHT
Horizontal Deflection ( X) Input via CHII
Power Supply : 230 V ±10 %, 50/60 Hz
Bandwidth : DC -3 MHz (-3 dB)
Power consumption : 40 VA approximately
X-Y mode : Phase Shift <5° at 50 KHz
Weight : 7.3 Kg approximately
Deflection coefficients : 12 calibrated steps 5 mV/cm - 20
V/cm (1-2-5 sequence) Dimensions (mm.) : W 450 × D 420 × H 145
Input Impedance : 1 MΩ
II 25 pF approximately Operating Temp. : 0-40°C, 80 % RH
Component Tester (Built - in single touch) Product Tutorial : Online (Operating procedure,
Front panel control, Theory,
Test Voltage : Max 8.6 V (Open)
Control software optional).
Test Current : Max 8 mA (Shorted)
Included Accessories : BNC-BNC cable -1no.
Test Frequency : 50 Hz, Test circuit grounded to
BNC to Test Prod cable -1 no.
chassis
Test prods -1 pair
General Information
Jumpers -10 nos.
Cathode Ray Tube : 140 mm Rectangular tube with
Mains cord -1no.
internal graticule. P31 Phosphor
Accelerating potential : 2 KV approximately
Display : 8×10 cm
ISO 9001:2008
Certified