BENCHMARK
DETAIL_A
Bevel ia
0.063
See Note 3. JP —*—|
Core Dia
NOTES:
1. Lead tolerance:
«a. For 2 inches 40,006 inch
. Recut threads if stretch exceeds 0,006 inch in 2 inch.
2. Mt Outside Diameter less than 8920, Bevel Diameter is void and
(0.031 x 45° becomes effective.
‘3A vse step on the benchmark shall remain on the primary
shoulder. Rethreading is required if thee is no visible benchmark
4 Wirimur (LD. based on wall thickness at counterbore. Larger 0..
may be reqired for specific grade performance, Refer to catdlog
6.755 +9400.
PRIMARY MAKE-UP (BOX CONNECTION LENGTH)
‘SHOULDER.
(SEAL) aa Detail A
\
N >
7516 4 | ag \
Bevel Dia SECONDARY MAKE-UP SHOULDER
See Note 2 (MECHANICAL STOP) 4.238 Ret
— Cylindrical
Cuca ° 6.173 £0,031 Dia,
utside Dia “bore Di
wate | Chore Dia
vo
0.513 Min. 4
Thread taper 3.000 per ft.
or "Performance Sheet” for spectic minimum .D. reqirement. In case 0.031 x 45° MIN. 53 Threads per inch
of dispute, the larger of the two 0.0's shall gover. See Note 2
ele = | oivensions wrhout |
Assigned Ss S TOLERANCES ARE FOR
Le = REFERENCE DC58 BOX
8: Bi INFORMATION ONLY | FIELD INSPECTION DIMENSIONS
S|s 7, =
= \=| Te 04/15/14 ee ar cs
Date: a pe we IFBS6 [ot [83