1. Always make sure to press the T-square tightly against the side of the Drawing Board or Drawing Table with your left hand
2. Rest the drawing paper on top of the T-Square
3. Hold the paper in place, let go of the T-Square and tape or clip the paper in place 4. Move the T-Square up and down to check if the T-Square is Parallel to the top of the T-Square 5. Keep pressure on the T-Square. Make sure you have a sharp pencil and draw a line along the top of the T-Square. This is a horizontal line 6. Rest the Set-square on top of the T-Square. Keep pressure on the T-Square and hold on to the Set-square at the same time. 7. Draw a line along the edge of the Set-square. This is a vertical line.
8. Rotate each Set-square around so you can get different angles