Professional Documents
Culture Documents
Norwegian based companies in the oil and gas sector have a well established
reputation and a significant market share as providers of services, equipment
and systems to topsides and substructures for fixed and floating production
platforms and drilling rigs. In this catalogue we present the cluster of partner
companies of Norwegian Energy Partners (NORWEP) that provide products and
services towards topsides in general, as well as for the various types of floating Regional Director,
support structures. Per Hagen
TOPSIDES
Generally topsides comprises of production systems, supporting systems and accom-
modation for personnel. Its content is derived from the services it delivers in exploiting
an oil and/or gas field. E.g. separate oil, gas and water, deliver power and other utilities
or accommodate personnel.
The selection of the floating support structure depends on the following criteria:
• Dry or wet trees
• Storage requirement
• Available pipeline infrastructure
• Operator familiarity
• Field life
• Cost
• Area/field development plan (hub, tie-backs etc)
3
Drilling Equipment & systems Engineering & EPC
suppliers Technical contractor
services
systems
Technical
& moorings
EIT, Electric/
& IT services
EPC Floaters
Cranes, lifting
EPC Topsides
Administration
Drilling systems
Other Mechanical
& mooring design
Safety equipment/
Marine engineering
Process equipment
Rotating equipment
equipment/systems
automation/telecom
Topsides engineering
Aker Solutions
Aragon
Armatec
Autronica Fire & Security
Axess group
Bilfinger Industrier Norge
BVS Niedax
Cranemaster
CRE8 systems
Delta-p
DNV GL
Dwellop
Enhanced Drilling
FORCE Technology Norway
FPE Sontum
Framo
Freudenberg Oil & Gas Technologies
Gexcon
Glamox
Glava
Helifuel
Hitec Products
Hydro
IDENTEC SOLUTIONS
IKM Testing
Jotun
K. Lund Offshore
Kongsberg Maritime
Kværner
Lloyds Register Consulting
LMG Marin
Marine Aluminium
MHWirth
Drilling Equipment & systems Engineering & EPC
suppliers Technical contractor
services
systems
Technical
& moorings
EIT, Electric/
& IT services
EPC Floaters
Cranes, lifting
EPC Topsides
Administration
Drilling systems
& mooring design
Other mechanical
Safety equipment/
equipment/system
Marine engineering
Process equipment
Rotating equipment
automation/telecom
Topsides engineering
Innovation through oil and gas experience and proven ability to handle large projects in automation,
tele-communication and electrification including e-houses distinguish ABB as a highly competent
supplier to the offshore industry.
PRODUCTS SERVICES
ABB combines innovative automation, electric, ABB can participate and contribute in all
telecommunication solutions and EPC know-how phases of a project from feasibility study to
for the offshore Oil and Gas industry including operation as Main Instrument/Automation
EPC TOPSIDES fixed, floating and subsea facilities. The portfolio Contractor, Main Electrification Contractor, Main
EPC FLOATERS
specific to market are: Telecommunication Contractor.
TOPSIDES ENGINEERING
MARINE ENGINEERING &
MOORING DESIGN FULL EICT INCLUDING The activities include:
• e-house modules • Project management
EIT, ELECTRIC/AUTOMATION/
TELECOM • Electrification • Studies
ROTATING EQUIPMENT • Power and energy Management • Engineering design
DRILLING SYSTEMS • Power-from-shore (HVDC Light) • Procurement
• AC/DC Drilling drives • Configuration / Integration
• A complete range of AC electric propulsion and • Start-up
thruster systems • Commissioning
• Azipod propulsion • Training
• Integrated operations • Full service
• Remote operations • Global after market services
• Safety and automation system
• Historian and information management REFERENCES
• Instrumentation ABB has delivered to more than 60 FPSO’s around
• Asset management the world. Clients include: Statoil, ENI, Petrobras,
EnQuest, Teekay, Inpex, Dana.
TURN-KEY EPC DELIVERY OF TOPSIDE
MODULES INCLUDING
• Flare systems
• Water injection
• Fuel gas
• Process separation and PW treatment
• Compression and gas treatment (TEG)
• Close/open drain systems
• Power gen modules
• On-skid fire & gas and safety systems
• Pipe-racks with integrated process piping and
cable trays
Aibel is a leading provider of services to the Oil & Gas and Renewables Industry with a
strong track record within both Field Development, Modification & Maintenance projects
and Services. Aibel currently employ about 4000 people in Norway, Singapore and Thailand.
The project teams including management, engineering and procurement are located in
Norway, Singapore and Thailand, with yard facilities in Norway (Haugesund) and Thailand
(Laem Chabang). Aibel provide the complete value chain for Offshore and Onshore projects
from Studies and FEED to turnkey EPCIC projects.
PRODUCTS SERVICES
Integrated platforms, FPSO topsides/modules, Concept and FEED studies, Engineering,
onshore terminals. Windfarm converter Procurement and Construction, Integration and
stations, floating and fixed wind farm structures. Commissioning (EPCIC), maintenance,
Aquaculture and Marine project services. modification and operations support. Turnkey
Floating Production projects including hull and
marine services with partners.
TOPSIDES ENGINEERING
MARINE ENGINEERING &
MOORING DESIGN
Aibel Thailand
Construction of topside
modules and integrated
platforms
• EPC contracts in
collaboration with
Aibel in Singapore and
Norway
• The assembly area is
located at the port of
Laem Chabang
• Total area of 420.000
Sqm
Aibel Haugesund
• Construction of
integrated platforms
and topside modules
• Maintenance and
modifications of
offshore and onshore
facilities and modules
• Yard stay services
• One of Norway’s
largest indoor assembly
facilities
• One of the largest dry
docks in Northern
Europe
REFERENCES
Aker Solutions is a global provider of products, systems and services to the oil and gas industry.
Its engineering, design and technology bring discoveries into production and maximize
recovery. The company employs approximately 14,000 people in about 20 countries.
REFERENCES
The list below shows only a few examples of products and designs delivered for floating installations.
For a more comprehensive list please contact us, or see www.akersolutions.com
Project Client Technology
Skogul and Valhall Flank West Aker BP Topside engineering work undertaken as part
alliance of a wellhead platform alliance with Aker BP,
Kvaerner and ABB. The alliances have
previously completed front-end engineering
work for both fields.
Troll Equinor Front end engineering & design (FEED) and
engineering, procurement, construction &
installation (EPCI)
Barracuda, Caratinga and Albacora Petrobras Services contract to provide maintenance
Leste fields in the Campos Basin and modifications services for three FPSO
platforms at Petrobras-operated oil and gas
fields offshore Brazil
The Redwood Coast Offshore Wind Northern The first floating wind farm in the US Pacific
Project (RCOWP) California could be brought online by 2024, following
energy author- a breakthrough deal signed by northern
ity RCEA California’s Redwood Coast Energy Authority
(RCEA) and an international consortium
including Principle Power Inc (PPI), EDPR
and Aker Solutions, to build an up-to-150MW
array. The project will use PPI’s WindFloat
semisubmersible platform.
Njord A Upgrade Equinor Engineering, procurement and construction
work – upgrading the semi-submersible
Njord A platform
Johan Sverdrup field center, Norway Equinor Feasibility and concept studies, FEED, detail
engineering, topside hook-up and
modification work
Johan Castberg semi/FPSO, Norway Equinor Extended concept study, FEED, detail
engineering of topside and hull (and SPS)
Kebabangan topside, Malaysia ConocoPhillips FEED + Detail engineering
Gjøa semsubmersible, Norway Statoil EPCI for hull and topsides
Skarv FPSO, Norway BP FEED and EPcma
P51 and P52 semi hulls, Brazil Petrobras FEED
Hadrian semi, Gulf of Mexico ExxonMobil FEED Hull and Mooring
Edvard Grieg topside, Norway Lundin FEED + EP
Blind Faith semisubmersible Gulf of Chevron FEED and EPCI of hull, mooring and risers
Mexico
White Rose FPSO, Canada Husky Detail engineering and procurement
Ichtys semi + FPSO hull, Australia Inpex FEED
Browse TLP, Australia Woodside FEED
Adriatic LNG regasification terminal, ExxonMobil FEED and detail engineering
Italy and Qatar
Petroleum
We are both an engineering partner of choice • Oil & Water Separation & Treatment
as well as an EPC solution provider. Our multi- Aragon can also offer complete facility EPC
discipline team provides a range of services; together with our (50%) owner Sembcorp Marine
• Conceptual & pre-FEED studies Integrated Yards.
• FEED
• Detail Design & Execution SERVICES
• Commissioning, Start up & Operations Support Multidiscipline topsides Engineering, Procurement
• Project Management, Construction and and Construction (EPC) Services for offshore new-
Procurement Services build and conversion (greenfield and brownfield),
redeployment and MMO projects including;
With our proven track record, advanced working • Conceptual & pre-FEED studies
methods and most importantly our tried and • FEED
tested team with hard-won experience across over • Detail Design Engineering & Execution
a decade of projects we provide cost effective • Commissioning, Start up & Operations Support
EPC TOPSIDES
innovative solutions. • Project Management, Construction and
TOPSIDES ENGINEERING
TECHNICAL & PRODUCTION
Procurement Services
SERVICES PRODUCTS
PROCESS EQUIPMENT
From overall topside EPC to Oil & Gas Processing Aragon is a leading company for FPSO redeploy-
& Treatment Modules, Packages & Systems: ment projects with an in house developed exe-
• Dehydration (TEG and Molecular Sieve) cution model to enable fast and low cost evalu-
• Acid (CO2 & H2S) Gas Removal (Amine-based, ation and design to move an FPSO to a new field.
membranes)
• Gas Dew Pointing Aragon is also one of the leading engineering
• NGL & Condensate Recovery & Stabilisation partners globally for FLNG topsides.
• LPG Recovery, Fractionation & Stabilisation
• Natural gas Liquefaction Our team is particularly strong for complex
• LP & HP Gas Compression – Centrifugal (API process engineering design, including heavy oil,
617), Reciprocating (API 618), Screw (API 619), & condensate, LPG and LNG production, as well as
Liquid Ring (API 681) conventional oil and gas production. Aragon can
• Vapour Recovery & Control (Flare Gas & HC Gas) also offer complete facility design together with
• Zero Flaring Systems our sister companies LMG Marin and Sevan SSP.
Teekay Offshore Varg FPSO / Cheviot Project FEED Topsides Engineering 2018
Golar LNG Fortuna FLNG / Inlet Facilities FEED Topsides Engineering 2015
SBM Offshore MozFLNG Pre-FEED Topsides Engineering & Liquefaction Technology 2014
FLEX LNG Interoil PNGT2 FLNG FEED Topsides Engineering & Liquefaction Technology 2011
Teekay Offshore Voyageur Spirit FPSO Gas Dehydration Package EPC 2010
Armatec AS and the Armatec Group have been active within the maritime-, oil & gas industry
for more than 50 years, and are one of the market leaders within our segment in the Nordic
countries. We offer a wide range of high quality and fully certified pump systems, valve
systems and pressure systems to meet our customer requirements.
The company was founded with the vision to offer VALVES & VALVE SYSTEMS
you as our client: • ESD Valves, SDV Valves & BDV Valves
• Complete systems of high-quality products to • Control valves
increase operability, minimize CAPEX and lower • Safety valves
life cycle cost (LCC/OPEX). • On/off valves
• Advanced solutions and concepts, using our • Rupture-/Burst discs,
group resources and experience to plan and • Actuators and valve automation
implement solutions and concepts to our clients’ • Valve diagnostic,
specific problems or system requirements. • Leak detection,
• VCM – Valve Cycle Management
PRODUCTS
PUMPS SYSTEMS
• High pressure injection pumps SERVICES
• Process & utility pumps for all kinds of • Product Lifecycle Services
PROCESS EQUIPMENT
ROTATING EQUIPMENT applications • Engineering services
SAFETY EQUIPMENT/SYSTEMS • Seawater lift pumps and Ballast water pumps • 3D models for system integration
OTHER MECHANICAL EQUIPMENT/
SYSTEMS • Fire Water Pumps • QR code/RFID tagged products
• Misc. pump packages • Workshop repairs & field service
• Service and maintenance worldwide • Worldwide service for pump- and valve systems
• Aftermarket department for spare parts
• Recertification and calibration
REFERENCES
The list below shows only a few examples of products and designs delivered for floating installations.
For a more comprehensive list please contact us, or see www.armatec.no
Client Project Services
Conoco Maersk Oil & Gas Field Developments Actuated- and control valves
Maersk Oil & Gas TRYM ( DONG Energy) Actuated- and control valves/PSV
Maersk Oil & Gas Halfdan Phase 3 Actuated- and control valves
Maersk Oil & Gas Tyra West – Upgrade of Flowlines ESD Valves, Service and x-overs
SMOE Halfdan Phase IIII ( Partnering Agreement) Actuated- and control valves/PSV
Oil and gas installations around the world are becoming a safer place to work
- We are bold enough to take some of the credit.
Autronica Fire and Security is a leading innovator, • Gas Sampling; gas detection for harsh
manufacturer and supplier of fire and gas safety environment where direct gas detection is not
worldwide. Our products ensure safety in suitable or impractical like shale shaker ventil-
applications onshore and offshore and in the ation, ballast tanks and vessels with double hull
petrochemical, oil and gas sectors. Owned by • Full range of flame and gas detectors
United Technologies Corporation (UTC), we • High Sensitive Smoke Detection (HSSD)
employ more than 500 people handling the • AutroMaster ISEMS (Integrated Safety
complete value chain, from idea, development and Emergency Management System)
manufacturing to the marketing, sales and
servicing of our products. SERVICES
We are an international company with worldwide We offer world-wide service and support via our
offices and our HQ is located in Trondheim, offices in Stavanger, London, Houston, Busan,
Norway’s technology hotspot. Dubai, and Aberdeen, São Paulo & Singapore and
have a global net-work of authorized distributors.
PRODUCTS Services include;
• AutroSafe Integrated Fire & Gas Detection with • System design
EIT, ELECTRIC/AUTOMATION/ SelfVerify®; the world’s first IEC 61508 Safety • Project management
TELECOM
Integrity Level 2 (SIL2) certified integrated • Installation, commissioning and supervision
addressable Fire & Gas Detection System. • After sales service and spare parts
• AutroSafe IFG provides smart technology • Training
performing full detection chamber self-testing • 24/7 end user support
and calibration every 24 hours. This reduces the
maintenance cost significantly.
REFERENCES
Autronica Oil & Gas Division has a comprehensive global reference list. Sample of references are:
600 offshore platforms 250 drill ships/drill rigs 150 FPSO/FLNG 150 onshore productions/ 100 semisub
petrochemicals rigs
Ivar Aasen Pride BWO Catcher Petronas RAPID Norbe VI
Leviathan Saipem Pioneiro de Libra Mongstad Sedco 711
V.Filanovskaya Seadrill Ichthys Rnest Seadrill
Hess Stampede Odebrecht PetrobrasP51,52 Tout Lui Faut Jack Bates
Mariner Ocean Rig ENI Goliat Comperj Cosco Quest
Shell Malikai Diamond Petronas FLNG I, II Ras Laffan Sevan Driller
BP Clair Ridge Transocean Johan Castberg QC LNG COSL Pioneer
Martin Linge Ensco Shell Prelude QSTEC Scarabeo 7
Axess Group is a global partner delivering asset integrity solutions to the offshore,
maritime and energy industries, headquartered in Molde, Norway since 1998. We provide
Asset Integrity Management, Engineering Solutions, Advisory Services, Material Handling
Products and Technology, Marine Services and Software Solutions across 15 entities
worldwide.
Bilfinger Industrier Norge AS is a leading provider of ISP (Insulation, Scaffolding and Surface
Protection) and Related Services to the Norwegian Oil and Gas industry. Bilfinger Industrier
is a part of the Oil and Gas Division within Bilfinger SE, a leading Engineering and Services
Group with 70,000 employees worldwide, and revenue of €8billion. Bilfinger’s Oil and Gas
Division is active in Norway, Denmark, UK and North America, providing a range of Fabric
Maintenance Services. Bilfinger Industrier designs and manufactures a range of prefabricated
insulation and passive fire protection (PFP) products for the global Oil & Gas Industry.
REFERENCES
BVS Niedax is a Norwegian based world supplier of cable management solutions for the
oil and gas market. Our productrange is specially designed for offshore and arctic
environments. Manufacturing is carried out in Norway, Estonia and United Kingdom.
Cranemaster is a world leader in the field of passive heave compensation and shock
absorption for offshore lifting operations. Since 1983, we have been increasing operational
weather windows and operability for customers worldwide.
Cranemaster® units are mounted between the crane hook and the load, expanding your vessel
capabilities while protecting crane and personnel. The units require a minimum of maintenance
and deck space and a large fleet of rental units for lifts up to 1400 tons are ready for immediate
dispatch. In addition, we develop tailor-made units and provide engineering services related to
lift analysis.
Delta-p Pumpe og Kompressorsystmer as is a Norwegian OEM suplier for pumps and pump
packages for the oil and gas industry. We offer a range of pumps and compressors to meet
our customer requirements. Delta-p supplies to green field as well as brown field, service
and upgrading / modifications.
Our main features is to deliver customized rotating equipment fully tested according to
customer specifications.ISO 9001: 2015 certified.
PRODUCTS: SERVICE:
• Miscellaneous pump packages Aftermarket department will offer spare parts,
• Crude oil and condensate pumps service / overhaul of equipment. Skilled Service
• Wellhead and topside high pressure injection engineers with offshore certificate and OLF
pump packages (MEG/Methanol) certificates. We perform service both on site and
• High pressure injections pumps for Methanol, offshore.
MEG and MUD
• Sampling systems for oil exporting metering,
power mixing and sampling systems
ROTATING EQUIPMENT • SW Booster and water injection pumps
OTHER MECHANICAL EQUIPMENT/ • Process pumps for all kinds of applications
SYSTEMS
• Fire water and seawater lift pumps
• Chemical injection systems
• Remote control of pumps for service intervals /
smart save
Full power mixing unit incl. sampling cabinet Statoil MEG injection skid
Driven by our purpose of safeguarding life, property and the environment, DNV GL enables
organizations to advance the safety and sustainability of their business. We provide
classification and technical assurance along with software and independent expert
advisory services to the maritime, oil and gas, and energy industries. We also provide
certification services to customers across a wide range of industries.
Dwellop is a Norwegian and independent systems and solutions provider focusing on the
design and manufacturing of surface handling equipment for the well intervention market.
We are providing a wide range of products from skidding systems to Drilling Units. The
company was established in 2014 as result of a management buy-out of Rolls Royce’s
well intervention branch, but has a proven track record based on 25 years in the well inter-
vention business. We are located in Stavanger, Norway but serving a global market.
PRODUCTS SERVICES
Dwellop can provide a range of products and Dwellop has a highly qualified staff of engineers
systems to reduce time and cost and to increase for pre studies, design and production, for support,
safety and capacity for wireline and coil tubing upgrades and maintenances throughout the
operations on both floaters and fixed platforms. complete lifecycle of a well or a product
• Skidding System
• Weather Deck Hoist for Wireline REFERENCES
• Advances Tension Frame • BP
• Jacking Frame • Schlumberger
• Power Stand with Drop in Drum • Lupatech
CRANES, LIFTING & MOORINGS
• Remote Operated Wireline Mast • Odfjell Drilling
OTHER MECHANICAL EQUIPMENT/ • Automated Wireline Handling Tower • Aker Q Serv
SYSTEMS
• Coiled Tubing Advanced Tower • ConocoPhillips
DRILLING SYSTEMS • Baker Hughes
We have also developed Modular Drilling Rigs: • Hess
• Cantilever Rig 200 MT • ConocoPhillips
• Stand Alone Rig 200 MT • Statoil
• Stand Alone Rig 350 MT • Hess
• P&A Rig • Baker Hughes
• Talisman
FORCE Technology is among the leading technological consulting and service companies in
Scandinavia and internationally. We provides our technology and services globally.
FPE Sontum is a market leading supplier of active fire-fighting systems for the global oil
and gas industry globally with its head office in Stavanger, Norway. FPE Sontum AS and our
sister companies in the ALIGN group provide project management, components and exper-
tise at every stage of the technical safety and fire fighting life cycle. We manage greenfield
and brownfield projects, covering the whole process from study through to EPC execution.
Framo AS is based in Bergen, Norway. From its beginning in 1938, the company has grown
into a worldwide organization with subsidiaries on three continents. Today Framo AS with
1200 employees is a leading manufacturer of submerged pumping systems for the tanker
shipping and offshore industry. We work actively with our customers and provide competence
and experience. With dedication, structured work and continuous improvements we develop
tomorrow’s pumping systems. Framo is a part of Alfa Laval and Bergen is the headquarter for
Marine pumping systems. The Framo products are sold and serviced by Framo only.
Freudenberg Oil & Gas Technologies (FO>) is a global solutions provider of innovative
seal solutions and differentiated seal products to the global oil and gas industry. The
company is focused on the exploration and production (upstream) segment, and acquired
Vector Technology Group in January 2013. Our 620 associates serve a wide range of customers
including oil and gas producing companies, original equipment manufacturers (OEMs) and
engineering and service companies that provide technologies, equipment and services for
producing oil and gas from land based and offshore platforms throughout the world.
Gexcon AS is a world-leading company in the field of safety and risk management and
advanced dispersion, explosion and fire modelling. Gexcon’s software FLACS has become
an industry standard and is now the world #1 explosion simulator.
PRODUCTS REFERENCES
FLACS - Dispersion, Explosion and Fire simulator FLACS users:
FLACS is one of the best validated tools for model- Statoil, BP, Total Petrochemical, ExxonMobil, GDF
ling flammable and toxic releases in the technical Suez, Petrobras, CNCP, Sinopec, PDVSA, FERC,
safety context. FLACS is a comprehensive, yet HSL, Sandia, IRSN, EDF, DNV, Safetec, Lloyds
easy to use, software tool for safety modelling Register, ABS, Baker Risk, ERM, WorleyParsons,
consequences in full 3D. It is used extensively in Atkins, BMT, MMI, Saipem, CB&I, HQC, Technip
the Oil and Gas and Process industries.
LNG references from GexCon Consulting:
SERVICES Explosion risk, Vessel layout and optimum safety
• Services and Consultancy design, safety gaps, risk calculation, gas
• Software and Technology detection optimization, spill consequence, Snøhvit
• Lab and testing Centre LNG, Masala FLNG, Petronas FLNG2, #1 Generic
• Gexcon Safety and Security Academy FLNG (Shell FLNG), #2 Generic FLNG (Shell
TECHNICAL & PRODUCTION
SERVICES
FLNG), #3 Generic FLNG (US oil company), #4
OUR SERVICE AND CONSULTANCY TEAMS will Generic FLNG (US oil company), #5 Generic FLNG
help you identify all your hazards, understand your (Japanese engineering company), Livorno LNG
risks and contribute to improving your company’s FRSU, Facility siting studies (18 of a present total
safety performance. Process/Technical Safety 21 US terminals)
and Risk Management. In addition, Gexcon has
extensive and specialised expertise in LNG and Offshore vessels, safety studies:
Hydrogen. The modelling includes: Dispersion Many 100s of studies, using FLACS doing
Modelling, Explosion Modelling, Fire Modelling, Gas simulations and risk calculation. Also an
and Dust Explosion Safety Regulatory Compliance, increasing number of Onshore safety studies.
Occupational Health and Safety, Incident
Investigation, litigation. Incident investigation, litigation:
Piper Alpha, Bunce field, TW800 Plane crash,
OUR SOFTWARE AND TECHNOLOGY TEAMS Danvers Explosion, West – Texas Explosion, and
DEVELOP FLACS, FLACS Fire, FLACS Risk, including 100s of more.
modules for LNG and Hydrogen. In addition, Gexcon
is the exclusive global partner of Shell’s Software Experimental work/Laboratory testing:
FRED, SHEPHERD and PIPA, used for consequence More than 30 years of experience, 100s of
modelling and risk assessment. projects – both research/FLACS validation, but
Gexcon use advanced technology - both Virtual also contract work related to Explosion vent
Reality and Augmented Reality to develop realistic panels, Explosion drag load on PFP, explosion
emergency training by using latest advanced barriers, equipment testing and certification etc.
technology. Customers: Total, Statoil, engineering companies
and manufacturer of explosion proof equipment.
OUR LAB AND TESTING CENTRE is performing
explosion tests, equipment testing, together
with our experimental research performed at the
Laboratories in Bergen, Norway. Our test facilities
include a well-equipped test laboratory and a large-
scale jet-fire test site We also Certify Equipment
Intended for Use in Explosive Atmospheres – ATEX
Tests Related to Certification and Classification
Gas Explosion Mitigation Systems Testing, Design
and Certification and Dust Explosion Properties.
Glamox is the world market leader in the manufacture and supply of lighting solutions on
the global marine and offshore markets. The company is involved in lighting design and
calculations, large installation projects and offshore maintenance and modifications.
PRODUCTS REFERENCES
Comprehensive portfolios of conventional and LED • Statoil
lighting solutions; • Petrobras
Outdoor lighting • Shell
• Hazardous area and safe zone • BP
EIT, ELECTRIC/AUTOMATION/
TELECOM
• Flood lights and Area lights • Total E&P
• Standard & Emergency lights • ENI E&P
Indoor lighting • Transocean
• Hazardous area and safe zone • Seadrill
• Control & Technical rooms • Saipem
• Accommodation & Public areas • Modec
Designated areas • BW Offshore
• Searchlights • Teekay
• Navigation lights • Odfjell
• Helideck lights
• Signal lights For detailed references contact your nearest
Lighting Software Glamox office.
• OptiWin - from a simple area to full 3D
renderings Design/Calculations
• PDMS plug-in tool – combine your modelling
with OptiWin lighting design
GLAVA is the leading manufacturer and complete supplier of insulation and related
products in Norway. Saint-Gobain France owns GLAVA. More than 20 years of experience
in the Marine and offshore market. GLAVA headquarter are located in Askim and produces
environmentally friendly glass wool at two factories in Norway. GLAVA® has annual
revenues of NOK 1.6 billion (2016) and approximately 320 employees.
PRODUCTS REFERENCES
Light Weight Solutions – for Fire insulation, Aker Barents H6E
Thermal insulation, Acoustics and Personal Aker Spitsbergen H6E
protection. Ivar Aasen
Edvard Grieg
PROCESS EQUIPMENT
OTHER MECHANICAL EQUIPMENT/
SYSTEMS
Helifuel AS specialize in design, delivery and support of fueling systems for the marine and
offshore industries globally. Helifuel systems include tanks, pumps, filters, control & safety
mechanisms to ensure safe delivery of fuel in a marine environment.
Helifuel customers ranges across different industries such as Oil & Gas, Marine, Military,
Luxury and Offshore Wind.
Helifuel have during the last 20 years taken the PRODUCTS & SERVICES
leading position within helicopter fueling systems • New-built Fuelling systems including tanks, skid,
and have extended its business to include fuelling pump system and dispensing system.
systems supplying gasoline, diesel or whichever • Certification & Maintenance services including
fuel required for its application. installation, commissioning, regular
In addition Helifuel can offer services such as maintenance and certification
certification & maintenance, upgrades, training, • Upgrades of existing fuelling systems to meet
spare parts and rental equipment. the latest safety standards.
• Rental equipment such as complete fuelling
With its niche focus on fueling systems for systems, tanks, foam dosing units, pressure
maritime applications, the participation from nozzles.
design stage to operation and the involvement • Training of operative personnel.
OTHER MECHANICAL EQUIPMENT/
SYSTEMS within different industries representing different • Spare parts and consumables from stock.
needs, Helifuel has developed its reputation as the
fuelling experts.
REFERENCES
Helifuel has a comprehensive global reference list supplying to Vessel owners, EPC contractors and
Yards within different industries. Some examples within Oil & Gas are:
Hitec Products AS design and manufacture high quality Electro-Hydraulic control systems and
Chemical Injection Units for the Oil & Gas Industry. We are organised in four divisions: TOPSIDE
SYSTEMS, SUBSEA SYSTEMS, OILFIELD SYSTEMS and CUSTOMER SUPPORT.
We have a project-oriented organisation with a • FCP w/IRCD – Flow Control Panel w/ Injection
culture for succeeding and exceeding our clients’ Rate Control Device
expectations. Our production facilities are in • LCP – Local Control Panels
Stavanger, Forsand and Singapore, including a • Instrumentation for Xmas threes
deep-water quay and facilities for large module • Accumulator Packages
assembly. We are also present with sales and
engineering offices in Telemark, Norway and PROCESS PACKAGES
Lowestoft, UK.
SERVICES
PRODUCTS Hitec Products assists in all stages of your project,
Highly innovative electro-hydraulic control and including FEED assistance, project management,
chemical injection systems with a modular and stan- Engineering & Design, 3D modeling and real life
dardized approach in design. We have high focus on prototyping, procurement, manufacturing and test-
user interface and safety. Our systems include: ing. Our Customer Support centers provide service
• IWOCS - Installation Workover Control Systems and solutions to ensure immediate and long-term
EIT, ELECTRIC/AUTOMATION/
TELECOM
with HPU satisfaction to clients worldwide. This include
• Operator Control Room for Workover Systems Surveys & Inspections, Modification & Maintenance,
• HPU - Hydraulic Power Units for Production / re-certifications and supply of spare parts.
Subsea, Ballast, Wellhead and Drilling
• TFHPU Test & Flushing Hydraulic Power Units REFERENCES
• SCMTS – Subsea Control Module Test Stand Hitec Products have enjoyed working with our clients
• TUTU – Topside Umbilical Termination Unit on more than 1300 projects. Our clients include the
• WHCP – Wellhead Control Panel major oil companies, smaller independent oil com-
• CIU – Chemical Injection unit panies and engineering companies, as well as key
• MIU – MEG / Methanol Injection Unit players in the subsea, oil service and FPSO market.
Hydro is a fully integrated aluminium company with 35,000 employees in 40 countries on all
continents, combining local expertise, worldwide reach and unmatched capabilities in R&D. In
addition to production of primary aluminium, rolled and extruded products and recycling, Hydro
also extracts bauxite, refines alumina and generates energy to be the only 360° company of
the global aluminium industry. Hydro is present within all market segments for aluminium, with
sales and trading activities throughout the value chain serving more than 30,000 customers.
Based in Norway and rooted in more than a century of experience in renewable energy,
technology and innovation, Hydro is committed to strengthening the viability of its customers
and communities, shaping a sustainable future through innovative aluminium solutions.
PRODUCT REFERENCES
WATCHERPERSONNEL is developed to tackle the IDENTEC SOLUTIONS’ POB solution is installed on
strict regulations, regarding personnel logistics the following North Sea assets:
offshore. IDENTEC SOLUTIONS mustering system • Martin Linge (Equinor)
provides great HS&E benefits in the following • Johan Sverdrup (Equinor)
areas: • Johan Castberg (Equinor)
• Safe and efficient mustering in real-time • Ekofisk (ConocoPhillips)
• Faster and more accurate search and rescue for • Gjøa (Neptune Energy)
ADMINISTRATION & IT SERVICES missing personnel • Haven (OSM Offshore)
• Automated updates on head count • Intrepid (Maersk Drilling)
SAFETY EQUIPMENT/SYSTEMS
• Access control to restricted areas • Interceptor (Maersk Drilling)
• Active “Lone worker” monitoring • Integrator (Maersk Drilling)
IKM Testing, with 1000 employees, is a company within the IKM Group and is a global
multi-discipline supplier of pipeline-, drilling-, mechanical completion- and commissioning
services to the oil & gas industry.
IKM Testing has its head office • Decommissioning • Subsea template/manifolds FAT
at Sola, Norway and international • LRA/NORM handling • Pig Tracking/ Isotope services
departments in UK, Canada, Inspection Drilling services
Brazil, Poland, Australia, • Video inspection • Cuttings Transport System
Singapore, Indonesia, Thailand, • Tank inspection (CTS)
Malaysia and Korea. • RPAS-/UAV inspection • Scale squeeze inhibition
Machining On-Site • Acid stimulation services
SERVICES • Cold cutting Training courses
Nitrogen services • Flange facing • Bolt tensioning (NS-EN 1591
• N2/He Leak testing • Hot-/cold tapping • Valves
• Nitrogen purging / -foaming • Conductor cutting • Hot Bolting Services
• Pipe freezing Certification/Maintenance • Plugging services
• N2 gas lift • Certification of accumulators • Compact flanges
Testing/Plugging • Maintenance of heat • Pressure testing
• Pressure and vacuum testing exchangers • Hot oil flushing
TECHNICAL & PRODUCTION
• Plugging Services • PSV Calibration On-site • Hydrojetting
SERVICES
• Riser annulus testing Flange Work Rental
Cleaning • Flange Management • Pumps and tanks
• Cleaning in place (CIP) • Bolting work services • Inspection equipment
• Chemical cleaning • Hot bolting • Bolt working equipment
• Oil flushing/oil cleaning • Flow coding/labelling/tagging • Drying and filter units
• Hydrojetting Pipeline services • Flanges and plugs
• Steaming • Pigging /pipeline services/ • Air compressors
• Tank-/Vessel cleaning RFO / PCO • Testing equipment
• Preservation • Umbilical testing/cleaning • Hydraulic hose reels
• Subsea spools commissioning • Hot water cleaners
REFERENCES
IKM Testing has extensive experience supplying services to large scale projects including FPSO’s, drill
ships and drilling rigs worldwide.
Jotun is one of the world’s leading manufacturers of paints, coatings and powder coatings.
The Jotun Group has 71 companies, 40 production facilities on all continents, and is
represented in more than 90 countries with our network of agents, branch offices,
distributors and sales offices around the world. Our operations cover development,
production, marketing, R&D and sales of paints and coatings to protect and decorate
surfaces in residential, shipping and industrial markets.
K.LUND Offshore is a strong and dependable supplier of compressors for the Norwegian
and international oil and gas industry. We reside in Sola, Norway, where we manufacture the
following according to the oil-companies specifications:
• Compressors • Marathon
• Air dryers • Agip/ENI
• Nexen Petroleum
PRODUCTS • Det Norske
• Compressors and dryers for air and gas. • Total
• Lundin
REFERENCES • Aker Solution
• Equinor • Technip
• Aker Solution • Able
• Kvaerner • Hundai Heavy Industries
• Aible • Samsung
• Shell • Daewoo
• ConocoPhillips • CB&I.
• Texaco • AMEC
• ExxonMobile • Deutag
ROTATING EQUIPMENT
• BP • Transocean
• Petrobras • Seadrill
• Sakhaline Energy • Subsea 7
• Archer
PRODUCTS
Kongsberg Maritime deliver systems for navigation, dynamic positioning and vessel control, marine
automation, safety management, process control, energy management, information management and
advisory services, cargo sensors and handling, deck handling, underwater mapping and subsea
monitoring, fish finding and monitoring, maritime simulation and training, and reference systems. Our
solutions enhance efficiency and safety throughout the whole maritime technology spectrum and we
offer additional competence in providing turnkey engineering services within the shipbuilding and
offshore production sectors.
REFERENCES
• More than 18 000 offshore and merchant • More than 80 Offshore Production Units and
vessels with Kongsberg Maritime products and FPSO’s with Kongsberg Maritime products and
systems systems, including more than 15 EIT deliveries
Kongsberg Marine is a world leader in marine solutions, providing products, services and
expertise to more than 30.000 commercial and naval vessels through their extensive global
network.
Main products for the E&P segment are • Standby and Rescue Vessels
Azimuthing Propulsion systems, Power systems, • Offshore Ice breaking AHTS and PSV
Electric and Control systems, Mooring systems • Anchor Handling Supply Vessels
and Subsea Cranes. • Seismic Research Vessels
• Subsea Service Vessels
PRODUCTS
Kongsberg Marine products include a wide range of: SERVICES
• Ship Design Based on decades of experience in the Marine
• Thrusters Industry and a close collaboration with the
• Diesel and Gas engines, Medium speed service networks globally, Kongberg Maritime
• Diesel and Gas engines, MTU High Speed has capability to offer support to our customers
• Gas Turbines globally.
• Deck Machinery Equipment Health Monitoring via our 24/7
• Winches Helpdesk with remote access to critical parts
• Mooring Systems and an extensive network of more than 1.500
• Subsea Cranes service engineers.
• Launch and recovery systems for ROV`s
• Waterjets REFERENCES
• Marine control Systems Our reference list consists of more than 30.000
• DP systems vessels and includes:
• Energy Monitoring Systems • More than 120 Drillships
• Health Monitoring Systems • 100 + Semi Subs
• 50 + Accomodation-, Pipelay and Construction
UT DESIGN OFFSHORE SERVICE VESSELS: Barges
• Offshore Supply Vessels • 1.200 + Offshore Support Vessels
• Well Stimulation Vessels
• Top Hole Drilling Vessels Please contact us for complete reference lists
• IMR Vessels
Kvaerner’s services also include major modification • Steel substructures for fixed or floating offshore
work onshore and offshore, including demolition wind power installations
and disposal of installations at end of field life. • Concrete substructures for fixed or floating
offshore wind power installations
50 years of experience from some of the world’s • 2 state-of-the-art facilities (Stord and Verdal) for
most demanding oil and gas projects. fabrication, assembly and commissioning
Internationally recognized for predictable project
execution and completion on time, with agreed REFERENCES
quality. • Johan Castberg FPSO topsides modules,
hook-up and integration (ongoing)
Kvaerner’s proven capabilities include: • Johan Sverdrup Riser platform module
• Topsides for fixed platforms (ongoing)
• Topsides for floating platforms: FPSOs, • Johan Sverdrup ULQ (ongoing)
semisubmersibles, TLPs, Spars • Njord A platform upgrade (ongoing)
• Steel jackets for fixed offshore platforms • Edvard Grieg Topside EPC
EPC TOPSIDES • Concrete gravity based structures or concrete
EPC FLOATERS
hulls for fixed or floating facilities
TOPSIDES ENGINEERING
MARINE ENGINEERING &
MOORING DESIGN
From brownfield to greenfield and new frontiers, we apply our engineering technical expertise,
proven technology and innovative solutions to ensure you achieve and surpass your exploration
and production goals.
Our reservoir, wells, risk management, integrity • DROPHY, an interactive tool for systematically
and commercial experts help assure reliability, assessing risk of dropped objects
cost efficiency, accuracy and project success from • WINDCHILL, an interactive tool for operations to
everyday operational tasks to large scale assess exposure of outdoor workplaces related
developments and projects. We thrive on to cooling
overcoming complex challenges and helping you • GASDETECTOR LAYOUT, a software tool for
achieve results you never thought possible. optimizing gas detector layout (location and
number of units) for topside process modules
In a world of increasing complexity – overloaded • ESCAPE is a SW tool for analyzing impairment
with data and opinion – we know that our clients of escape due to smoke and heat from fires.
need more than technology to succeed. They • VESSPOSS – an SW tool for processing and
need an experienced hand. A partner to listen, cut analyzing raw AIS ship traffic data
through the noise and focus on what really • SAD- an SW tool that enables a very rapid
matters to them and their customers. This means estimation of hazardous distances in of a given
a commitment to embracing new technology, and a subsea light gas release. Input parameters are
TECHNICAL & PRODUCTION deep rooted desire to drive better performance. By wind speed, depth and leakage rate.
SERVICES
identifying risks, problems and challenges before
they materialise, we enable clients to mitigate risk SERVICES
up front. This facilitates savings through optimised • Risk based management
designs and more efficient processes. But the most • Risk assessments/QRA
significant savings are in the accidents that are • Technical safety and consequence modeling
prevented through a safer operation. • Reliability and asset performance
• Human factors and work environment
PRODUCTS • Engineering dynamics
LR has extensive competence, capacity and soft- • Noise and vibration predictions and
ware tools within all product areas related to HSE, measurements
quality, asset and risk management and engineer- • Cyber security and intergraded operations
ing dynamics. Some of them are listed below: • Asset Integrity
• Risk Spectrum PSA SW, risk assessments (fault • Well project management and engineering
tree and event tree) • Drilling integrity
• RiskWatcher BOP, tool for online assessment of • Rig survey and inspections
BOP reliability • Compliance and verification
• COSAC, a SW tool for offshore concept safety • Rig selection and intake
assessment
• BLOWFAM, a SW tool for estimating blow-out
frequencies
REFERENCES
LMG Marin is a marine engineering company offer design and engineering of offshore ships
and floaters, providing complete package solutions for the vessels. LMG Marin celebrates
its 75th anniversary in 2018, and references covers more than 1000 ships and floaters built
at shipyards worldwide.
The company has main offices in Bergen, Norway, offshore LNG processing and facilitate
and branch engineering offices in Poland and France. integration into a complete LNG supply chain.
LMG Marin is fully owned by Sembcorp Marine in • LNG powered ships: LMG Marin has become a
Singapore. leader in the design and engineering of LNG
• powered ships, currently with 18 units in
PRODUCTS operation or under construction.
LMG Marin has long experience in providing
innovative and reliable solutions for the upstream SERVICES
and downstream industries, such as: LMG Marin provides design and engineering services
• Deepwater drillships: LMG pioneered the with most types of floaters and ships, such as:
development of the harsh environment drillships • All naval architectural disciplines
leading to the delivery of the “Navis Explorer 1”. • Hydrodynamics
Further, LMG Marin has design and engineering • Structural analysis
responsibility for two different series of drillships • Systems engineering
MARINE ENGINEERING &
MOORING DESIGN currently under construction. • Mechanical
• FPSOs and FPSO/D: LMG Marin provides design • Electrical and instrumentation
of FPSOs and has developed a unique FPSO • Integration of design disciplines
with drilling capabilities - the Sea Twin FPSO/D • Fabrication preparation
• Gravity based LNG terminals: LMG Marin has • Project Planning and management
facilitated the development of a gravity based
LNG terminal for shallow water installations, REFERENCES
based on cost effective fabrication at a shipyard Drillships Navis Explorer 1 (now Belford Dolphin”),
and to be towed, and finally installed fully 4 – 6 drillships under construction. FSO Ailsa for
outfitted at the seabed. Culzean field, FPSO conversions, FPSO design,
• Floating LNG and el. power systems: LMG Marin several LNG powered ferries (newbuilds &
provides several solutions related to floaters for conversions).
Marine Aluminium is a world leading supplier of innovative and sustainable safe access
solutions, light weighted aluminium outfitting, and friction stir welded panels for the Oil and
Gas, Marine and Offshore Wind industries.
REFERENCES
A selection of our references is given below. Please contact Marine Aluminium for a full list of references:
MHWirth delivers oilfield products, high tech systems and services. Our knowledge and
technologies span from reservoir to production and through the life of the field.
Miko Marine AS was founded in 1996 on the idea of using a magnetic patch for stopping
seawater leaking into a floating vessel - or to stop oil leaking from the vessel into the sea.
SAFETY EQUIPMENT/SYSTEMS
OTHER MECHANICAL EQUIPMENT/
SYSTEMS
Minox Technology is the leading provider of gas de-hydration and deoxygenation solutions
bringing state of the art technology to the IOR water injection market worldwide. Although
our activities are primarily targeted towards international oil companies, we also design
and develop gas de-hydration and water treatment equipment for the onshore and offshore
processing industries.
Moss Maritime is a leading designer and provider of licensed technology for innovative
floater designs for both exploration and production facilities and for solutions within
the LNG industry.
REFERENCES
A selection of our references is given below. Please contact Moss Maritime for a full list of references.
Project Client Technology
Bollsta Dolphin Fred Olsen Energy CS-60 drilling semisubmersible
PolarStar/Northern Light Gazflot CS-50 MkII drilling semisubmersible
Cheviot FPU ATP FEED & Detail design Octabuoy dry-tree semi
FPSO PetroJarl 1 Teekay Production FPSO FEED life extension
FPSO Cidade de Vittoria Petrobras/Saipem Detail design - FPSO conversion hull & marine systems
FPSO Gimboa Sonangol/Saipem Detail design - FPSO conversion hull & marine systems
Berge Helene BW Offshore Detail design - FPSO conversion hull & marine systems
Shtokman SDAG/Saipem FEED development icebreaking FPU/FPSO
Luva/Aasta Hansten Statoil Octabuoy Concept study
Offshore LNG Toscana OLT FSRU detail engineering
Golar Spirit Golar FSRU detail engineering
Deepwater FPU Tullow Oil Octabuoy Feasibility study
FPU Noble Energy Feasibility study
Hilli FLNG Keppel/Golar Basic and detail engineering
REFERENCES
MRC Global Norway product range can be offered within following segments:
End user Contractor Project Start End Scope of supply Manufacturer Customer
reference
TECHNICAL & PRODUCTION Statoil Statoil All Installations 2007 2015 Control and Choke Valves Fisher Frame Agreement
SERVICES Mokveld SAP4600008753
EIT, ELECTRIC/AUTOMATION/ Statoil Statoil All Installations 2007 2015 Non Slam Check Valves Mokveld Frame Agreement
TELECOM SAP4600008754
Statoil Statoil All Installations 2013 > Spareparts for Farris and Farris Frame Agreement
Elfab Elfab SAP4600019775
ConocoPhillips ConocoPhillips All Installations 2010 > Control Valves Fisher Frame Agreement
NSBU-081494
ConocoPhillips Aker Egersund Ekofisk Zulu 2011 2012 Control valves Fisher EKOZ-AK-B-EI210-1001
Aibel Aibel Dolwin 2012 2013 Ball Valves ABV Velan 4500130078
ENI ABB / HHI Goliat 2010 2014 Control Valves Fisher 4560192976
ENI ABB / HHI Goliat 2010 2014 Safety Relief Valves Farris 4560192976
ENI ABB / HHI Goliat 2010 2014 Gate, Globe, Check and Solent &Pratt 4560192976
Butterfly Valves ABV
ATV ABB / HHI Goliat 2010 2014 Linear Actuators Emerson/Bettis 504843
Statoil Statoil All Installations 2008 2017 Valve Management and All
Service Agreement
ConocoPhillips ConocoPhillips Ekofisk Area 2008 2018 Valve Management and All
Service Agreement
BP Norge BP Norge All Installations 2008 2017 Valve Management and All
Service Agreement
GDF Suez GDF Suez Gjøa 2013 2017 Valve Management and All SAP4600004088
Service Agreement
Marathon Oil Marathon Oil Alvheim 2014 2019 Valve Management and All SAP4600010742
Service Agreement
Statoil Statoil Sture Ongoing Online Valve Monitoring All Frame agreement
and Diagnostic Agreement
Multiconsult has been involved in oil & gas projects in Norway and abroad for over 40 years.
We have developed leading expertise in design, engineering and follow up of execution
and installations for both on- and offshore projects. Our expertise covers civil, geotechnic,
design of sophisticated concrete and steel structures as well as multidiscipline engineering
including special services for offshore structures and floaters and onshore plants according
to NORSOK requirements. Our specialized services within marine geotechnical and arctic
technology comprising cold climate engineering and offshore ice simulations are recognized
on a world class level. Our expertise is based on heavy involvement in R&D projects.
To meet the needs of upstream development, Nexans proposes an offer based on Four
Pillars to create value for upstream oil & gas players. It provides the technology, quality and
collaboration needed for future upstream growth.
SELECTED REFERENCES
Goliat FPSO
Year: 2015
Owner: ENI
Shipyard: Hyundai
Cable: RFOU, BFOU (NEK)
Class: DNV
USAN (FPSO)
Year: 2010
Owner: TOTAL-Elf
Shipyard: Hyundai
Cable: RFOU, TKCK, (NEK, IEC)
Class: BV
PROCESS EQUIPMENT
Norsafe develops advanced technology marine lifesaving systems for all types of ships and
offshore installations, and specialised boats for military and professional use.
Since 1903 Norsafe has produced over 29 000 the marine and offshore industries.
boats and uses its expertise in safety at sea to
offer the widest range of conventional and freefall Norsafe Group headquarters is located in Arendal,
lifeboats, fast rescue boats and davits in the Norway, and sales/service offices are located in
market today. All of Norsafe’s products comply China, Greece, Mexico, Singapore, South Korea,
with SOLAS and industry regulations. USA, Japan, Brazil, Australia, the Netherlands, the
United Arab Emirates and UK. Norsafe’s worldwide
Norsafe is focused on providing reliability in case involvement includes production, sales, delivery
of emergency and keeping LSA fully operational and service of lifesaving equipment for ships and
throughout its lifetime. Its global service network the offshore industry. The company is a complete
of 45 service partners is spread across all provider within maritime safety.
continents and operates from over 300 ports
worldwide, providing 24/7 service throughout PRODUCTS
the entire lifetime of the equipment. This ensures Lifesaving systems:
operational safety and readiness at all times, and • Freefall lifeboats
compliance with the latest industry regulations. • Conventional lifeboats
TECHNICAL AND PRODUCTION • Daughter craft
SERVICES
Norsafe is also passionate about crew training, • Rescue boats
SAFETY EQUIPMENT/SYSTEMS offering a wide range of courses through Norsafe • Work boats
OTHER MECHANICAL EQUIPMENT/
SYSTEMS Academy training centres in Rosendal, Norway • Davits
and Port of Lavrion, Greece. These state-of-the-art Military & Professional:
training facilities are the ideal setting for world- • Search and rescue
class offshore, maritime and fisheries courses in • Work boats
accordance with STCW and NOROG standards for • Defense and security
the safe operation and maintenance of LSA. Our
courses give your crew the confidence to carry out SERVICES
procedures that can save lives in an emergency • Upgrades & modifications
situation. • Engineering and product development
• Technical support and assistance
Norsafe’s Military & Professional range of boats • Equipment installation and training
are ideal for patrol, assistance and specialist use, • Commissioning
including operations in hostile areas. Our multi- • Testing
purpose boats are reliable and easily manoeuvrable • Annual inspection and maintenance
with excellent seakeeping abilities. Over the past • General maintenance, repair and upgrading
25 years, Norsafe has supplied rescue boats, • Original spare parts
patrol boats and specialised boats to the police, • Service engineers and experts
coast guard, navy, customs, SAR operations and • Training services
REFERENCES
Øglænd System is a global and market leading supplier of multidiscipline support systems.
We take advantage of our 40 years of experience from the offshore oil & gas industry to
provide our customers with the most cost efficient and durable products. Whether it is for
oil & gas, infrastructure, shipbuilding, wind energy or aqua culture we can deliver
pre-engineered solutions that ensure reduced installation time and weight reductions. By
using our simulation environment, Precision for Decision, we are able to digitally calculate
the exact loading capacities of our Mekano® support systems.
PRODUCTS REFERENCES
• Multidiscipline support systems • Shell Prelude FLNG
• Cable tray and cable ladder systems • Inpex Ichthys CPF
• Cable ladders & accessories for ships • Shell Pearl GTL
• Lighting support equipment • Ekofisk 2/4 L
• Racks, instrument stands & equipment plates • Bayu Undan
• Pipe support • Emal Smelter Complex Phase 2
• Trefoil & single foil cable cleats • Skarv FPSO
• Tubing clamps • Ivar Aasen Field
EIT, ELECTRIC/AUTOMATION/ • Engineering support • Maersk Culzean Field Development
TELECOM • Al-Shaheen Field
OTHER MECHANICAL EQUIPMENT/
SYSTEMS SERVICES • Johan Sverdrup Field
Our systems are supplied in primarily stainless
steel and FRP (Fibre Reinforced Polyester)
• Drilling rigs
• Offshore platforms
• FPSOs
• Petro chemical plants
• LNG terminals
PRODUCTS SERVICES
OneSubsea Processing main products are offered Customer support services are offered from
from the three following segments: Subsea Services which is a separate segment
PROCESS EQUIPMENT • Pumps and Subsea Systems within OneSubsea for aftermarket including
• Wet Gas Compression Systems installation and commissioning, technical support,
• Multiphase and Wet Gas Metering Systems production support, service and repair.
Manufacturer of synthetic fiber ropes of extreme strength, providing products for vessel
types, rigs and fixed installations within the energy segments. All our products are 100%
Made in Norway.
PG offers innovative pump and compressor solutions for the global oil and gas, subsea
and marine markets. Our product range is further enhanced to cover related products and
applications to up-stream and downstream the processes, including:
PIPEOTECH deliver a revolutionary, certified and proved sealing technology for pipe
connections, the DeltaV-Seal™. Its metal seal creates a static connection that is verified
to resist mechanical stress and vibrations while enduring pressure pulses. This is the first
ever DNV-GL type approval certificate for sealing technology.
Polyform was founded in 1955, and was the first company in the world to produce all
plastic buoys and fenders. Today Polyform is one of Europes most advandced businesses
within production of plastic products. Our aim is to be a leading supplier within the offshore
industry for surface and subsea buoyancy.
Flowsafe
• Hose floatation devicde for buker and offshore
hoses 3’’-5’’.
• HDF Fenders for fendering of large offshore
vessels.
• Subsea modular Buoyancy elements.
SAFETY EQUIPMENT/SYSTEMS
OTHER MECHANICAL EQUIPMENT/
SYSTEMS
Project & Survey is a company with highly specialized and experienced team in the field
of project, surveys, technical and operational support for oil & gas Industry. Our team
holds extensive experience from project and operation management worldwide. With a
close cooperation with clients, class societies, we offer services and skilled personnel
within a wide range of multidisciplinary tasks. Offices in Norway, Canada And Mexico
Project & Surveys follows the ISO 9001 standard & held the IADC rig inspection
accreditation.
TOPSIDE SURVEYS
Project management on behalf of client. IADC certified rig inspection & condition
Hardware assessment
FLOATERS Pre-purchase / pre-hire
Project: Reactivation & maintenance
Special Periodical Surveys (SPS) / Five yearly Asset integrity & safety management
classification P&I Marine insurance
Modifications, upgrades, refurbishments, Vetting inspection
TECHNICAL AND PRODUCTION Scheduled Maintenance Periods and Emergency
SERVICES
maintenance Crewing OPERATION & MAINTENANCE
Reactivation, Operations startup and infield On and offshore operational and technical, support.
support We deliver total lifecycle solutions worldwide
Rig delivery, verification & Acceptance testing focusing on improving asset integrity, reducing
Rig intake cost and overcoming operational challenges.
Operations startup and infield support
Decommissioning
Rapp Bomek offers a complete range of advanced door, window and wall safety solutions
for global energy, civil and security markets, and has been a market leader in the structural
security industry for over 30 years. We provide a total range of hinged and sliding fire
doors, security doors, hatches, steel profile-based window and wall systems. The products
in our product range are tried and tested to withstand the toughest environments and are
resistant to fire, blast, gas, water, intrusion, ballistics, and sound, as well as the harshest of
climates.
Rapp Bomek utilizes a comprehensive quality development and modelling, through procurement,
management system which covers all business construction and installation, delivering the
areas. We are certified with the following standards: finished commissioned construction. Or, supplying
• Quality Management System NS-EN ISO standard products, if that is what is required.
9001:2015 • Rapp Bomek doors cover all fire ratings and
• Environment Management System NS-EN ISO types:
14001:2015 · Hinged and sliding
· Single and double
Specific requirements for installations are shown in · Fire ratings: Non-rated, A0-A120, H0-H120,
SAFETY EQUIPMENT/SYSTEMS certificates. Rapp Bomek have certificates with all J30
OTHER MECHANICAL EQUIPMENT/ major classification societies such as: · Combination doors, fire rated, explosion proof,
SYSTEMS
• DNV-GL gastight and weather/ watertight
• Bureau Veritas · Operation: pneumatically, hydraulically and
• US Coast Guard electrically operated
• ABS
• Russian Maritime Register of Shipping SERVICES:
• RINA We offer global service and maintenance through our
network of agents and certified service
OUR PRODUCTS: professionals and will help customers to maximize
• We custom build solutions to our customers’ product lifetime, whilst minimizing costs, through our
individual needs, delivering turnkey solutions lifetime service concept “Certified for life”.
on EPCIC basis, where we assist with concept
Sevan Marine ASA is listed on Oslo Stock Exchange (ticker SEVAN). Sevan is a specialized
marine engineering and design house, having developed the cylindrical Sevan hull design
as a low cost alternative to traditional ship-shaped, turret moored solutions. This
innovative, geostationary design avoids the need for a costly turret while allowing for a
larger number of risers and the flexibility for future tie-ins. With 11 units constructed and
over 35 years of accumulated operational experience, the Sevan Marine cylindrical hull is a
proven and credible alternative to traditional offshore, floating designs.
Sevan develop marine solutions to meet our characteristics, supporting high uptime during
clients’ needs based on our proprietary, circular extreme weather conditions as well as low OPEX
hull design. Support is provided to clients for early spent on heading control and position keeping
phase studies (feasibility, concept, Pre-FEED), systems.
detailed engineering (FEED and detailed design),
construction and installation. This ensures the Finally, provisional installations for future tie-ins
Sevan experience is incorporated into every new are inherently available to a low cost.
Sevan Marine unit that is built and operated.
PRODUCTS
The Sevan design size is flexible. To date, designs FPSO, FSO, FLNG, GTW, MODU, FSRU
MARINE ENGINEERING &
have been developed for upto 55 000 tons/1.5 mill
MOORING DESIGN bls storage. SERVICES
TECHNICAL SERVICES
ADMINISTRATION & IT SERVICES Specialist and general engineering services, site
The cylindrical design offers attractive motion supervision, marine operations supervision.
REFERENCES
Please refer to www.sevanmarine.com for details.
Siemens’ comprehensive solutions portfolio extends across the entire oil and gas value
chain and is built upon leading Siemens technology and competence. Siemens provides
reliable, innovative, efficient and environmentally friendly products, systems and solutions
for your production infrastructure, both onshore and offshore with global support. Siemens
innovative solutions are continually being optimised and developed through our extensive,
market oriented development and research programs, with a view to develop the key
enabling technologies for today’s and tomorrow’s emerging processes and applications and
at the same time providing our customers with the safest, most reliable solutions, life cycle
services in a cost effective and attractive offering.
Sulzer creates reliable and sustainable solutions for its markets oil and gas, power, water
and the general industry with engineering and application expertise in Pumps Equipment,
Rotating Equipment Services, Separation, mixing technology and associated services.
Sulzer was founded in 1834 with headquarters in Winterthur Switzerland.
Sulzer Chemtech provide advanced solutions in Our extensive range of process internals includes
the field of process technology and separation the following:
equipment, and a global footprint with over 170 • Inlet devices such as Shell Schoepentoeter™,
production and service sites. The Sulzer Chemtech Schoepentoeter Plus vane type and various
Upstream Systems & Internals portfolio for cyclonic types
onshore & offshore oil & gas processing facilities • Mist elimination devices KnitMesh™ wire mesh,
Separation and processing aimed at reducing Mellachevron™ vane packs, Shell VerisSwirl™
CAPEX and OPEX for both greenfield projects and axial cyclones and MKS Multi Cassette™
brownfield modifications of existing production • Liquid/liquid coalescers Mellaplate™ plate pack,
units in need of debottlenecking for capacity and/ VIEC™ (Vessel Internal Electrostatic Coalescer),
or efficiency improvement. This portfolio includes Dusec™ and Dusec Plus™
all selected process packages as well as all • Sand separation internals such as HiPer™ Sand
required process internals for columns, separators Removal Cyclones and Sand Jetting Systems
and scrubbers. • Various types of Mellapak™ and Mellapak Plus™
PROCESS EQUIPMENT
ROTATING EQUIPMENT
structured packings, with associated tower
OTHER MECHANICAL EQUIPMENT/ PROCESS PACKAGES AND INTERNALS internals
SYSTEMS
Technologies available as process packages • Various types of NeXRing™ and conventional
include the following: random packings, with associated tower
• cMIST™ (compact mass transfer & inline sepa- internals
ration technology) for compact gas dehydration, • Various type of high performance and
licensed exclusively from ExxonMobil for conventional trays, including those under license
onshore and offshore application to Sulzer, from Shell Global Solutions such as ConSep™
• HiPer™ compact/inline separators & degassers trays and HiFi trays
• Wash tank systems for advanced oil processing • Static mixers for efficient blending of liquid/
in FPSO hulls, licensed exclusively from Total liquid and gas/liquid mixtures
and currently in operation on 4 West-African
FPSO’s with 2 further start-ups expected in All these internals can also be designed and
2019 supplied in the form of process packages, if so
• HiPer™ (bulk) deoiler hydrocyclones for pro- preferred.
duced water treatment, possibly combined with
other produced water treatment technologies
• HiPer™ sand removal & handling systems
Tamrotor Marine Compressors (TMC) is the world’s leading supplier of compressed air systems
for marine and offshore use. The product range includes screw compressors, dryers and
filters for any compressed air requirement, including tailor-made systems and custom
engineered compressors for offshore and topside installations. TMC has a world-wide
service, spare part and sales network.
All our compressors are approved by the major • Compact with low noise level
classification societies, and our quality • Electrical, diesel or hydraulic drive
documentation meets the specific requirements of • ATEX certified
the industry. • Meets NORSOK requirements
• Can be installed in DNV-approved offshore
STANDARD RANGE OF COMPRESSORS container
TMC’s standard range of marine screw com-
pressors covers capacities from 30 to 4000m3. TMC SMART AIR® COMPRESSORS
TMC is the only screw compressor manufacturer TMC Smart Air® energy-saving marine screw
making equipment strictly for the marine and compressors utilize the latest technology to offer
offshore markets. precise control of compressor speed to match
• Made for marine and offshore use - designed for actual system demand. The result is up to 50%
55°C ambient temperature reduction in energy consumption, which means
PROCESS EQUIPMENT
ROTATING EQUIPMENT • Testing includes simulation of extreme lower energy costs and reduced life cycle costs,
OTHER MECHANICAL EQUIPMENT/ conditions as well as a significant reduction in harmful
SYSTEMS
• High quality parts - our air ends are famous for emissions.
their long lifetime
• Delivery of original TMC parts anywhere in the AIR DRYERS AND FILTERS
world within 48 hours TMC offers complete compressed air systems
including dryers and filters to achieve the highest
CUSTOM ENGINEERED COMPRESSORS FOR air quality. Proper filtration is the only way to
OFFSHORE AND TOPSIDE USE obtain oil-free air.
TMC’s Custom Engineered Compressors are
compliant with all requirements for offshore and REFERENCES
topside use. TMC compressors have been chosen by the
• Water or air cooled systems market leaders for a large number of drillships,
• Capacity range 10– 55 m³/min drilling rigs, FPSOs and OSVs worldwide. A
• Non-hazardous zone installations detailed reference list is available on request.
• EX Zone 1 & 2 installations
TechInvent AS was founded in 2008 by Mr. Alf • No additional actuator, flowmeter or controller
Egil Stensen, inventor of the FluidCom in close required.
cooperation with Co-owners - Statoil Technology • Integrated control software.
Invest AS, Aarbakke Innovation AS and Ipark AS. • Reduced space and weight compared with
Other development partners include CMR automated systems.
Prototech, Westcontrol Electronics and Innovasjon
Norge. OPEX reductions
• Significantly reduced OPEX through elimination
In Q3 2017 TechInvent as was aquired 100% by of over- and under dosing.
PROCESS EQUIPMENT Yokogawa Electric Corporation. Yokogawa is a • Exstreme reduction in opex compared with
leading, global supplier of industrial automation, manually operated systems needing drift
test and measurement solution with a global correction.
footprint and presence in all major oil & gas • Increased product lifetime.
destinations. • Works on thermal expansion - less mechanical
moving parts.
PRODUCT: • No regular maintenance, self-cleaning
TechInvent´s patented technology provides a functionality.
game changing product that delivers reliable
continuous chemical injection control, simplicity, REFERENCES:
reduced OPEX, real-time control and monitoring, Operators:
less weight and a more efficient use of space and Statoil (Equinor)
equipment. Aker BP
The FluidCom™ is a fully automatic chemical ExxonMobil
injection controller. Its unique patented technology ConocoPhillips
is considered a worldwide game changer, enabling Wintershall
significant CAPEX and OPEX savings. PointResources
By ensuring reliable and accurate chemical Apache
dosage, the end users obtain a controlled and PDO
efficient use of production chemicals by
optimizing the oil and gas production, improve EPCI:
water quality and secures system integrity. Aker Solutions
WorleyParsons
Cost saving technology ApplySørco
FluidCom is a fully automated, simple and reliable Heerema
device equipped with integrated autonomous Aibel
valve control, continuous flow metering and self-
cleaning functionality. Installations using FluidCom Package Builders:
will experience significantly reduced Capex and Proserv
Opex expenditures. Kanfa
Ellingsen Systems
CAPEX reductions CRE8
• Lower investment cost compared with Hitec Products
conventional technology.
• Significantly reduced need for cabling/IO
signals.
TechnipFMC is a global leader in subsea, onshore/offshore, and surface projects. With our
proprietary technologies and production systems, integrated expertise, and comprehensive
solutions, we are transforming our clients’ project economics.
Teknotherm Marine AS is a Heinen & Hopman group company that provides a full range of
high quality standard as well as tailor made HVAC & Refrigeration solutions to demanding
offshore application. We design and manufacture equipment for harsh environment and
explosion proof installations. Our solutions comply with all major classification societies
and standards.
“Our mission is to ensure perfect climate indoors, regardless of the weather outside”
Our HVAC & Refrigeration offer serve any type of Complete Provision Room Refrigeration Systems.
fixed and floating offshore installation: Electrical & Control Systems: Starter Panels,
• OHVS - Offshore High Voltage Stations to wind Control Panels
projects Environment: Absorption chiller solutions
• FPSO - Floating Production Storage & Offloading
Vessels MAIN FEATURES:
• Fixed production platforms with Living Quarters Factory assembled made to order packages
• Semi-Submersible Drilling Rigs including internal piping and electrical cabling.
• Jack-up rigs for drilling production Freshwater, Seawater or Air-cooled condensers.
• Life extension projects and front-end Teknotherm HMI (Human Machine Interface) in
OTHER MECHANICAL EQUIPMENT/
engineering support. house developed touch-screen control.
SYSTEMS Custom design capabilities that can meet any
ENGINEERING: project requirements. Reliable operation with
Experienced engineering staff with trac record high quality components, materials and surface
dating back to the start of Norwegian offshore treatment.
activity. We design energy and service efficient Optimized size and weight for limited space
solutions requiring minimal footprints. Our requirements.
solutions consider HSE requirements to Easy access for service and maintenance
meet demand for low noise and vibration, full Efficient equipment with high COP (Coefficient of
docu-mentation packages with drawings and Performance) to reduce power consumption
certifications. Teknotherm also offer turn-key Environmentally friendly refrigerants with Low
solutions with in-house built control systems and GWP (Global Warming Potential) including natural
site supervision during construction at yard or refrigerants like CO2.
offshore.
REFERENCES:
PRODUCTS: Johan Castberg FPSO - SCM/ Equinor
Air Handling Units, Electric heaters, Heat DolWin - Dragados/ Siemens Tennet
Exchangers, Axial Fans, Centrifugal Fans and Fan Martin Linge FSO - KNOT (Knutsen Offshore
Coil Units. Tankers)
Water Chillers Units, DX Units and Self-Contained Transocean Norge (ex West Rigel) - SCM/ Seadrill
AC Units. Bollsta Dolphin - Hyundai Heavy Industries/ FOE
Thermtech is your supplier of equipment and support for separation of drilling wastes. The
unique friction based TCC® thermal process separates oil and water from the solids. The
operation is safe and hassle free.
Off shore treatment separation of oil and water from drilling wastes.
In situ cleaning of drilling waste is an The process does not change the oil characteristics
environmentally friendly way of saving money. and thus the recovered oil is re-usable in new
Most of the constituents in drilling waste are drilling mud. The recovered oil can also be used
harmless components, which can safely be as fuel.
discharged to sea after cleaning. Reduction of
skip & ship operations saves transportation cost Flexibility
and reduces the carbon footprint. Less crane TCC units are customized to the need of the
activity improves the safety and removes weather customer. Electrically powered units or units with
dependency. Offshore units can be supplied as diesel engine, different sizes and capacities, self
temporary, mobile units or as fixed installations. supported or fully integrated in the rig or factory
installation, onshore or offshore standards,
On shore treatment certified for different regions etc. The Thermtech
PROCESS EQUIPMENT
Stationary units at centralised locations or mobile staff of skilled engineers are ready for any
units following the drilling operations. The TCC® challenge.
separation technology offers safe and hassle free .
TP Connectors (TPC) was established in April 2016 with the core business to design and manufacture
compact flanges and clamp connector products and associated seal rings of the highest quality to the
global oil and gas industry. The company was founded in collaboration with Teknisk Produksjon AS
(TP) in Drammen which has machined compact flanges and clamp connectors since the late 1980’s.
Highly experienced and technically skilled personnel, together with TP’s vast experience in
machining, makes TPC the ideal partner for all your flange and clamp connection needs.
In addition of doing sales & marketing, design, The engineering team consist of experienced
development and project management of engineers with capabilities of all kind of flange
compact flanges and clamp connector supplies, design and calculations including FEA of flanges
TPC can also undertake all kinds of special and connectors structural capacity, functionality,
designs of sealing solutions based on Norsok SCF/ SAF and HISC. The Technical Manager
L005, ASME and API standards. The TPC of TPC has participated in writing the NORSOK
associates are an innovative and experienced L-005 and with the ISO 27509
team with more than thirty years in the oil and gas
business. The engineering team of TPC designs tailor made
flanges for:
TPC serve a wide range of customers including • Offshore riser systems
oil and gas producing companies, original • Offshore loading systems
PROCESS EQUIPMENT equipment manufacturers and engineering and • Subsea process & transport
OTHER MECHANICAL EQUIPMENT/ service companies that provide technologies, • Subsea containment, e.g electrical
SYSTEMS
equipment and services for producing oil and gas • Process industry for high temperature
from land based and offshore platforms • LNG
throughout the world.
TPC also offer the following services:
The TPC products and sealing technology are • Training courses including: Handling &
used in some of the most demanding Protection, Assembly/ Disassembly, Bolting and
appli-cations in oil and gas, including: offshore Damage assessment.
oil & gas platforms, FPSO’s, refineries, riser • Dimensional inspection at customers locations
and swivel applications, flowlines and subsea or at TPC’s premises.
installations. The featured products are the TPC • Leak investigation: TPC can help by giving an
Compact Flange, the TPC clamp connector and assessment of leaks, and solving the leak issues
ROV operated TPC Clamp Connector. • Damage assessment & repair management
• Leak reduction initiative: supervising during
Our partner, Teknisk Produksjon AS (TP) has fabrication, construction and commissioning
produced Compact Flanges since 1989. The with respect to leak reduction. Reducing leaks
TPC Compact Flange is designed to meet the leads to significant time saving, due to the
functional and design requirements of Chapter 4 reduction of repairs and modifications.
of NORSOK L-005. The TPC Compact Flange can
be delivered with IX, HX or Delta V-Seals. The TPC team is committed to design and
manufacturing the safest and most efficient
The TPC Clamp Connector design is based on pressure containment in the market. TPC’s core
established industry standards as referenced focus is on product quality and development, the
by NORSOK NMj1 and NMj3. The TPC Clamp recruitment and retention of highly trained and
Connectors are interchangeable with the competent personnel, continued improvement
equivalent type of connectors available on the and product installation support. In addition to its
market, and has been approved by Statoil. commitment to safety, reliability and
technological development, TPC continuously
aims to excel in order to meet or surpass its
client’s expectation.
Trelleborg is a world leader in engineered polymer solutions that seal, damp and protect
critical applications in demanding environments.
Typhonix provides low shear choke- and control valves, produced water pumps and other
process equipment for a more cost effective and cleaner oil production.
References
Typhonix has delivered low shear valves
and pumps to projects operated by Statoil,
Wintershall, Shell, BHP among others. Please
contact us if you would like to have more
Venturi-shaped
cyclonic body
information about specific projects.
WME AS is a total supply chain provider of active fire-fighting systems, various fire safety
products and nitrogen generators to Oil & Gas, Marine and selected industries. WME’s
commitment to safety and quality in all phases from engineering, design, sub-supplier
selection, assembly and testing has made it a trusted supplier with proven track records to
international clients for more than 20 years.
Wood is a global leader in the delivery of project, engineering and technical services to
energy and industrial markets. We operate in more than 60 countries, employing around
55,000 people, with revenues of around $10 billion. We provide performance-driven
solutions throughout the asset life cycle, from concept to decommissioning across a broad
range of industrial markets, including the upstream, midstream and downstream oil & gas,
power & process, environment and infrastructure, clean energy, mining, nuclear, and general
industrial sectors.
PRODUCTS SERVICES
XSENS Clamp-on Flow Meter accurately XSENS assist in doing installation and commis-
measures flow rate as well as fluid fraction, sioning of our own Meters.
salinity and density by detection of a tomographic
acoustic pattern from outside of the pipe. REFERENCES
Key enablers for the disruptive innovation is After successful flow loop testing at industrial
off-centre ultrasonic beam transmission and the conditions at CMR multiphase flow loop (NORCE),
process pipe utilized as an advanced transmission an industrial pilot installation program was
gateway for fluid properties along with pipe initiated, involving oil companies in the North
characteristics. Together this results in qualitative Sea aswell as in the Middle East and ship owners
PROCESS EQUIPMENT
and quantitative measurement accuracy up until where Meters are used to measure bunker oil
now only achieved by in-line technology. consumption and caracteristics. Today the Meters
By installation of XSENS clamp-on meter, pipe are commercial available and several deliveries
integrity is never broken; XSENS clamp-on meter have been completed.
have no potential leak points and will not cause
any risk for leakage of oil or gas. Installation
causes no harm or personnel risk, as the instru-
ment system is clamped to the outside of the
pressurized pipe. Size and weight is just a fraction
of conventional flow meter systems.
Xsens received the spotlight award for most
innovative technology at OTC 2019
Zenitel has a strong presence in both the onshore and offshore secure communications
market through its product brand, Vingtor-Stentofon. The brand is recognized globally for
offering advanced offshore and onshore communication systems for environments where
life, property and assets are at stake.
We know what it takes to provide safe and secure Key Offerings include Public Address, Radio and
communication in harsh environments. Intercom complemented with a wide range of
supplementary systems.
Because all projects are unique in the Oil and Gas
industry, merely providing hardware and software
is not enough to ensure the success of an
individual project. Our focus is therefore to provide
integrated solutions that are individually tailored to
each unique project.
EIT, ELECTRIC/AUTOMATION/
TELECOM
77
PROMOTING NORWEGIAN
ENERGY CAPABILITIES IN
INTERNATIONAL MARKETS
Oslo Stavanger
Hoffsveien 23, Prof. Olav Hanssensvei 7a
NO-0214 Oslo NO-4068 Stavanger
Norway Norway
+47 22 06 14 80 +47 51 87 48 80
NORWEP@NORWEP.COM
WWW.NORWEP.COM