Professional Documents
Culture Documents
2502a002 PDF
2502a002 PDF
Application Features
Parker D1V Series hydraulic directional control valves
• Easy access mounting bolts.
A are high performance, direct operated 4-way valves.
They are available in 2 or 3 position styles. They are • 207 Bar (3000 PSI) pressure rating.
manifold mounted valves, which conform to NFPA’s
D03/CETOP 3 mounting patterns. These valves were
• Flows up to 12 GPM (45 LPM).
designed for industrial and mobile hydraulic • Rugged four land spools.
applications which require high cycle rates, long life,
high efficiency and low power consumption.
• Low pressure drop.
solenoid.
A B
• DC lights available (CSA
approval for solenoids and
lights).
A B
• Easy coil replacement.
D1V*9 45 (12)
P T
8
4
150
2000
Supply Pressure
100 7, 14
11
1000
50
26
10
0 LPM 10 20 30 40
0
GPM 1 2 3 4 5 6 7 8 9 10 11 12
Flow
Example:
Determine the maximum allowable flow of a D1V Series valve (#20
spool) at 83 Bar (1200 PSI) supply pressure. Locate the curve marked Important Notes for Switching Limit Charts
“20”. At 83 Bar (1200 PSI) supply pressure, the maximum flow is 1. Shift limits charted for equal flow A and B ports. Unequal A
45 L/M (12 GPM). At 207 Bar (3000 PSI), the flow is 37 L/M (10 GPM). and B port flows may reduce shift limits.
The chart below demonstrates graphically the % of DP 93 111 119 126 132 137 141
(Approx.)
performance characteristics of the D1VW 8-watt valve.
Curves were generated using 100 SSU hydraulic oil.
The 8-watt coil and other design features of the D1VW
For any other viscosity, pressure drop will change per chart.
accommodate a maximum flow of 45 LPM (12 GPM)
at 207 Bar (3000 PSI).
Performance Curves
PSI BAR
500 35
30 9 8
400
25
7
Pressure Drop
300
20
6
15
200 5
4
10 3
2
100
5
1
0
LPM 10 20 30 40
0
GPM 1 2 3 4 5 6 7 8 9 10 11 12
Flow
General Description
The D1VW 8-watt directional control valves are high-
performance, 4-chamber, direct operated, wet
armature solenoid controlled, 3 or 4-way valves. They B AB A A
are available in 2 or 3-position and conform to NFPA’s
D03/CETOP 3 mounting patterns. PT
Features
• 17 spool styles available.
• Three electrical connection options.
• Lights available (CSA approval available for solenoids
and lights.
• Easy access mounting bolts.
• Waterproof (NEMA 4 rated).
• CSA approved.
• No tools required for coil removal. A B
Response Time
Nominal response time (milliseconds) at 207 Bar
(3000 PSI) is 45 LPM (12 GPM). Solenoid Ratings
Insulation System Class F
Solenoid Type Pull-In Drop-Out
Allowable Deviation
DC 80 34 from rated voltage -10% to +15%
Armature Wet pin type
CSA file LR60407
Specifications
Leadwire length 6” from coil face.
Mounting Pattern NFPA D03, CETOP 3; NG 6
Mounting DIN 24340-A6
Interface ISO 4401-AB-03-4-A D1VW Solenoid Electrical Characteristics†
CETOP R35H 4.2-4-03,
NFPA D03 Solenoid Nominal In Rush Holding
Code Volts/Hz Amps Amps Watts
Maximum P, A, B
Pressure 207 Bar (3000 PSI) Standard K 12 VDC — .67 8
CSA 207 Bar (3000 PSI) J 24 VDC — .33 8
MODEL
46.0
(1.81)
A B 23.0
54.3 (2.14)
P T
241.1
Manual Override
(9.49)
THIRD-ANGLE
PROJECTION
46.0 MODEL
(1.81)
A B
23.0 P T
(0.91) 15.5
(0.61) 99.2
54.3 (2.14) (3.91) 72.6
Minimum (2.86)
25.3 Coil Removal 12.0 (0.47) Minimum
(1.00) Connector Removal
83.6
(3.29) 72.3
(2.85)
50.0
(1.97)
23.8 See
(0.94) Note
166.7
Manual Override (6.56)
THIRD-ANGLE
PROJECTION
MODEL
AB
49.5
PT
54.3 (2.14) (1.95)
Min. Coil 24.8
142.1 (5.59) Removal 15.5 (0.98)
(0.61)
36.8 95.7 (3.77)
79.9 (3.15) 3.0
(1.45) Optional 1/2 NPTF (0.19)
Manaplug Thread
Both Ends
94.6
(3.72)
66.0 23.8
(2.60) (0.94) 50.0
(1.97)
THIRD-ANGLE
PROJECTION
MODEL
A B
49.5
P T
(1.95)
24.8
15.5 (0.98)
99.1 (0.61)
(3.90) 3.0
54.3 (2.14)
1/2 NPTF (0.19)
Min. Coil
Removal Thread
Both Ends
94.6
(3.72)
66.0
(2.60) 50.0
(1.97)
23.8
(0.94)
178.9 46.0
(7.04) (1.81)
Standard Valves
A D 1V W
NFPA D03
CETOP 3
Code Description
Wet armature N Nitrile
solenoid
V Fluorocarbon
2 11
P T P T Code Description Symbol
A B A B b A B
Single solenoid, 2 position,
3 14 B* spring offset
P T P T P to A and B to T in offset position P T
A B A B b A B a
* 8, 20 & 26 spools have closed crossover * Only spools 20, 26 & 30. This condition varies
** 9 & 30 spools have open crossover † Only spools 20 & 30. with spool code
Standard Valves
L A
Solenoid Solenoid/Tube Tube Coil Valve Design
Connection Combination Variation Variation Variations Series
NOTE:
Not required
when ordering.
Valve Weight:
Single Solenoid
1.36 kg (3.0 lbs)
Double Solenoid
1.6 kg (3.5 lbs)
Standard Bolt Kit:
BK209
A E P 1 75
E P H
Code Description
A Gray (Solenoid A)
B Black (Solenoid B)
Electrical Cords
E C
Manaplug
(valve variations 6, 56, 630)
Interface – Brad Harrison Plug
– 3-Pin for Single Solenoid
– 5-Pin for Double Solenoid
Ground
Wire #1 (Green)
Hirschmann Plug with Lights
Pin #3
Solenoid (Negative)
Solenoid (Positive) (Ground)
Wire #3 (Red/Black)
Wire #2 (Red/White)
Pin #1
3-Pin Manaplug (Mini) with Lights
(Positive)
Single Solenoid Valves Pin #2
(Negative)