Professional Documents
Culture Documents
www.vishay.com
Vishay Semiconductors
Optocoupler, Phototransistor Output, High Reliability, 5300 VRMS,
Low Input Current
FEATURES
• Operating temperature from -55 °C to +110 °C
• Good CTR linearity depending on forward current
• Isolation test voltage, 5300 VRMS
• High collector emitter voltage, VCEO = 80 V
A 1 4 C • Low saturation voltage
• Fast switching times
C 2 3 E
• Low CTR degradation
• Temperature stable
• Low coupling capacitance
• End stackable, 0.100" (2.54 mm) spacing
• High common mode interference immunity
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
• AC adapters
DESCRIPTION
• SMPS
The 110 °C rated VO618A feature a high current transfer
ratio, low coupling capacitance and high isolation voltage. • PLC
These couplers have a GaAs infrared diode emitter, which • Factory automation
is optically coupled to a silicon planar phototransistor • Game consoles
detector, and is incorporated in a plastic DIP-4 package.
The coupling devices are designed for signal transmission AGENCY APPROVALS
between two electrically separated circuits. • UL1577, file no. E52744
The couplers are end-stackable with 2.54 mm spacing. • cUL tested to CSA 22.2 bulletin 5A
Creepage and clearance distances of > 8.0 mm are • DIN EN 60747-5-5 (VDE 0884-5), available with option 1
achieved with option 6 and 8. This version complies with • BSI IEC 60950; IEC 60065
IEC 60950 (DIN VDE 0805) for reinforced insulation up to an
• FIMKO EN 60065, EN 60950-1
operation voltage of 400 VRMS or DC. Specifications subject
to change. • CQC GB8898-2001
ORDERING INFORMATION
DIP-4 Option 6
V O 6 1 8 A - # X 0 # # T
7.62 mm 10.16 mm
BIN AND
REEL > 8 mm
> 8 mm 9.27 mm typ.
CTR (%)
AGENCY CERTIFIED/PACKAGE
1 mA
UL, cUL, BSI, FIMKO 50 to 600 63 to 125 100 to 200 160 to 320
DIP-4 VO618A VO618A-2 VO618A-3 VO618A-4
SMD-4, option 9 - VO618A-2X009T - -
VDE, UL, cUL, BSI, FIMKO 50 to 600 63 to 125 100 to 200 160 to 320
DIP-4, 400 mil, option 6 - - - VO618A-4X016
SMD-4, option 7 - VO618A-2X017T VO618A-3X017T VO618A-4X017T
SMD-4, option 8 - - VO618A-3X018T -
Note
• Additional options may be possible, please contact sales office.
250
150
Detector
100
50 LED
0
0 20 40 60 80 100 120
IF IF +5V IF
0
0
tp t
IC
R G = 50 Ω 100 %
tp 90 %
= 0.01
T
t p = 50 µs
Channel I
Oscilloscope
R L = 1 MΩ 10 %
Channel II 0
C L = 20 pF
tr
50 Ω RL t
td ts tf
t on t off
95 10804-3
tp Pulse duration ts Storage time
Fig. 2 - Test Circuit, Non-Saturated Operation td Delay time tf Fall time
tr Rise time t off (= ts + tf) Turn-off time
t on (= td + tr) Turn-on time 96 11698
IF I F = 1 mA +5V
Fig. 4 - Switching Times
0
IC
R G = 50 Ω
tp
T
= 0.01
t p = 50 µs
Channel I
Oscilloscope
R L ≥ 1 MΩ
Channel II
C L ≤ 20 pF
50 Ω 1 kΩ
95 10843-1
100 35
Tamb = 110 °C IF = 25 mA
Tamb = 75 °C
Tamb = 25 °C
Tamb = 0 °C 25
10
Tamb = - 55 °C
20 IF = 1 mA IF = 10 mA
15
1 IF = 0.5 mA IF = 5 mA
10
5 IF = 2 mA
0.1 0
0.6 0.8 1.0 1.2 1.4 1.6 0.0 0.1 0.2 0.3 0.4
Fig. 5 - Forward Voltage vs. Forward Current Fig. 8 - Collector Current vs. Collector Emitter Voltage
0.12
IF = 25 mA
50 IF = 20 mA IF = 1 mA
0.10
40 IF = 15 mA
0.08
30
0.06
IF = 10 mA
20
0.04
10 0.02
IF = 1 mA IF = 5 mA
0 0.00
0 1 2 3 4 5 6 7 8 9 10 -60 -40 -20 0 20 40 60 80 100 120
VCE - Collector Emitter Voltage (V) Tamb - Ambient Temperature (°C)
Fig. 6 - Collector Current vs. Collector Emitter Voltage Fig. 9 - Collector Emitter Voltage vs. Ambient Temperature
10 000 1.4
IF = 0 mA
NCTR - Normalized CTR (sat)
ICE0 - Leakage Current (nA)
1000 1.2
VCE = 40 V
100 1.0
10 0.8
1 VCE = 24 V 0.6
0.1 0.4
VCE = 12 V
0.01 0.2 Normalized to CTR value:
IF = 1 mA, VCE = 5 V, Tamb = 25 °C
0.001 0
-60 -40 -20 0 20 40 60 80 100 120
-60 -40 -20 0 20 40 60 80 100 120
Tamb - Ambient Temperature (°C) Tamb - Ambient Temperature (°C)
Fig. 7 - Collector Emitter Current vs. Ambient Temperature Fig. 10 - Normalized Current Transfer Ratio vs.
Ambient Temperature (sat.)
1.4 1000
VCE = 5 V,
1.0
100
0.8
0.6
10
0.4
Fig. 11 - Normalized Current Transfer Ratio vs. Fig. 14 - Cut-Off Frequency vs. Collector Current
Ambient Temperature (non-sat.)
2.0 0
Tamb = 0 °C VCE = 5 V
1.8 Tamb = -55 °C
NCTR - Normalized CTR (sat)
Fig. 12 - Current Transfer Ratio vs. Forward Current (sat.) Fig. 15 - Phase Angle vs. Frequency
2.5 1000
Tamb = 0 °C VCE = 5 V
NCTR - Normalized CTR (NS)
IF = 1 mA
2.0 Tamb = -55 °C
toff (μs)
100
1.5
Tamb = 25 °C
Fig. 13 - Current Transfer Ratio vs. Forward Current (non-sat.) Fig. 16 - Switching Time vs. Load Resistance
-5 RL = 100 Ω
-10
Voltage Gain
-15
-20
RL = 1000 Ω
-25
-30
-35
VCE = 5 V
-40
1 10 100 1000
f - Frequency (kHz)
1 2
0.85 ± 0.1
3.5 ± 0.3
0.5 typ.
0.5 ± 0.1
+ 0.25
3.5 ± 0.3 0.35 - 0.3 3.5 ± 0.3 3.5 ± 0.3 3.5 ± 0.3
0.25 ± 0.1 0.1 ± 0.1
0.1 min.
9.27 min. 0.6 min. 8.16 ± 0.8
0.6 min.
2.7 min. 8 min.
10.16 ± 0.3
R 0.25
2.54
2.54 R0.25
1.78
1.78
8 min.
1.52 8 min. 1.52
11.05
11.05
VO618A-3
V YWW 25
Notes
• The VDE logo is only marked on option 1 parts. Option information is not marked on the part.
• Tape and reel suffix (T) is not part of the package marking.
PACKING INFORMATION
DEVICE PER TUBE
TYPE UNITS/TUBE TUBES/BOX UNITS/BOX
DIP-4 100 40 4000
Regular, special,
or bar code label
13"
17999-1
Fig. 18 - Tape and Reel Shipping Medium (1000 units per reel)
7.5 ± 0.1
16 ± 0.3
12 ± 0.1
0.3 ± 0.05
22536-2
SOLDER PROFILES
300 300
5s
Lead temperature max. 260 °C
250 255 °C
250 240 °C 245 °C
235 °C to
260 °C second full line: typical
wave 217 °C
Temperature (°C)
Temperature (°C)
0 0
0 50 100 150 200 250 0 50 100 150 200 250 300
94 8626 Time (s) 19841 Time (s)
Fig. 21 - Wave Soldering Double Wave Profile According to Fig. 22 - Lead (Pb)-free Reflow Solder Profile According to
J-STD-020 for DIP-8 Devices J-STD-020 for SMD-8 Devices
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.