Professional Documents
Culture Documents
LTD
BACK DRAFT DAMPER – SBDD
Introduction Ordering
The SAGAR AIR ranges of Back Draft Dampers
Type Duct size
are particularly suitable for use with horizontal
SBDD 1200 x 900 mm
ducts. The profiled vanes produce a strong
upward force which reduces the air resistance.
Specify non‐standard flanges and other
This means that the vanes open fully at low air
requirements separately.
velocities as well.
Legend
The robust construction ensures that the vanes
Type : SBDD
will not become deformed or loose. Air velocity
Duct size : Specify nominal duct size (mm)
should not exceed 12m/s.
Always width x height (mm)
Specification.
The Casing and blades of the BDD is
manufactured from galvanized steel sheet.
The Casing thickness is 1.2mm GI sheet and
Blades are made from 0.6mm tk. GI Sheet.
Blades are Vee stiffened for strength and
stability. Blades are fixed with parallel linkage
and are out of the air stream and covered with
a cover.
Blades rotate in bonze bushes. Spindles are
plated mild steel.
Options
Damper widths : 150mm
Flange : 25,40 & 50
Casing thickness : 1.2, 1.6, 2.0mm
Material : Stainless steel,
Aluminum
Blade thickness : 0.5 ‐ 0.8mm
Finish : Powder coated.
SAGAR AIR PVT.LTD.
Regd. Office & Works: Plot No. 96-97, IDA Uppal, Hyderabad-39, A.P. INDIA
Tel: 2720 1792 Fax: 091 40 2720 4837, Email: sagarair@gmail.com