Professional Documents
Culture Documents
TENDER DOCUMENT
Tender No: DRMWNGP-65-2019 Closing Date/Time: 23/09/2019 15:00
Sr.DEN Co NGP acting for and on behalf of The President of India invites E-Tenders against Tender No DRMWNGP-65-2019 Closing
Date/Time 23/09/2019 15:00 Hrs. Bidders will be able to submit their original/revised bids upto closing date and time only. Manual offers
are not allowed against this tender, and any such manual offer received shall be ignored.
Contractors are allowed to make payments against this tender towards tender document cost and earnest money only through only
payment modes available on IREPS portal like net banking, debit card, credit card etc. Manual payments through Demand draft, Banker
cheque, Deposit receipts, FDR etc. are not allowed.
1. NIT HEADER
2. SCHEDULE
S.No. Item Code Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding Unit
Schedule 01-Part A: (1) RCC Box construction of RCC box 5.5 X 4.5m by pushing/sliding
Above/
method on Itarsi-Amla section in connection with elimination of manned level crossing no. 5197891.54
Below/Par
240 at Km. 798.370
Please see Item Breakup for details. 4954147.48 4.92 5197891.54
01
Item Description:- M. S. (USSOR) Item
S.No. Item Code Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding Unit
Schedule 02-Part A: (2) RCC Box construction of RCC box 5.5 X 4.5m by
Above/
pushing/sliding method on Itarsi-Amla section in connection with elimination of manned 10293348.67
Below/Par
level crossing no. 240 at Km. 798.370
Please see Item Breakup for details. 9810664.00 4.92 10293348.67
01
Item Description:- N. S. Item
S.No. Item Code Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding Unit
Schedule 03-Part A: (3) Face wall construction of RCC box 5.5 X 4.5m by pushing/sliding
Above/
method on Itarsi-Amla section in connection with elimination of manned level crossing no. 2791987.95
Below/Par
240 at Km. 798.370
Please see Item Breakup for details. 2661063.62 4.92 2791987.95
01
Item Description:- M. S. (USSOR) Item
S.No. Item Code Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding Unit
Schedule 04-Part A: (4) Road work-Construction of RCC box 5.5 X 4.5m by
Above/
pushing/sliding method on Itarsi-Amla section in connection with elimination of manned 2170820.56
Below/Par
level crossing no. 240 at Km. 798.370
Pa g e 1 o f 47 Ru n Da te/Time: 30 /0 8 /2 0 19 12 :2 0 :0 0
NAGPUR CR DIVISION-ENGINEERING/CENTRAL RLY
TENDER DOCUMENT
Tender No: DRMWNGP-65-2019 Closing Date/Time: 23/09/2019 15:00
S.No. Item Code Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding Unit
Schedule 05-Part A:(4) Road work-Construction of RCC box 5.5 X 4.5m by pushing/sliding
Above/
method on Itarsi-Amla section in connection with elimination of manned level crossing no. 44556.58
Below/Par
240 at Km. 798.370
Please see Item Breakup for details. 42904.75 3.85 44556.58
01
Item Description:- M. S. USSOR item No. 013120
S.No. Item Code Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding Unit
Schedule 06-Part A: (5) Cover shed for Road-Construction of RCC box 5.5 X 4.5m by
Above/
pushing/sliding method on Itarsi-Amla section in connection with elimination of manned 3006990.80
Below/Par
level crossing no. 240 at Km. 798.370
Please see Item Breakup for details. 2733628.00 10.00 3006990.80
01
Item Description:- M. S. (USSOR) Item
S.No. Item Code Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding Unit
Schedule 07-Part A: (6) Removing & refixing of Height Guage-Construction of RCC box
Above/
5.5 X 4.5m by pushing/sliding method on Itarsi-Amla section in connection with elimination 844384.04
Below/Par
of manned level crossing no. 240 at Km. 798.370
Please see Item Breakup for details. 804788.45 4.92 844384.04
01
Item Description:- M. S. (USSOR) Item
S.No. Item Code Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding Unit
Schedule 08-Part A: (7) Transportation of RH Girder-Construction of RCC box 5.5 X 4.5m
Above/
by pushing/sliding method on Itarsi-Amla section in connection with elimination of manned 94223.20
Below/Par
level crossing no. 240 at Km. 798.370
Please see Item Breakup for details. 94506.72 (-) 0.30 94223.20
01
Item Description:- M. S. (USSOR) Item
S.No. Item Code Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding Unit
Schedule 09-Part A: (8) Rain water harvesting-Construction of RCC box 5.5 X 4.5m by
Above/
pushing/sliding method on Itarsi-Amla section in connection with elimination of manned 1564388.67
Below/Par
level crossing no. 240 at Km. 798.370
Please see Item Breakup for details. 1422171.52 10.00 1564388.67
01
Item Description:- M. S. (USSOR) Item
S.No. Item Code Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding Unit
Schedule 10-Part B: (1) RCC Box construction of RCC box 5.5 X 4.5m by pushing/sliding
Above/
method on Itarsi-Amla section in connection with elimination of manned level crossing no. 5197891.54
Below/Par
237/A at Km. 794.189
Please see Item Breakup for details. 4954147.48 4.92 5197891.54
01
Item Description:- M. S. (USSOR) Item
S.No. Item Code Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding Unit
Schedule 11-Part B: (2) RCC Box construction of RCC box 5.5 X 4.5m by
Above/
pushing/sliding method on Itarsi-Amla section in connection with elimination of manned 10293348.67
Below/Par
level crossing no. 237/A at Km. 794.189
Please see Item Breakup for details. 9810664.00 4.92 10293348.67
01
Item Description:- N. S. Item
S.No. Item Code Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding Unit
Schedule 12-Part B: (3) Face wall construction of RCC box 5.5 X 4.5m by pushing/sliding
Above/
method on Itarsi-Amla section in connection with elimination of manned level crossing no. 2791987.95
Below/Par
237/A at Km. 794.189
Pa g e 2 o f 47 Ru n Da te/Time: 30 /0 8 /2 0 19 12 :2 0 :0 0
NAGPUR CR DIVISION-ENGINEERING/CENTRAL RLY
TENDER DOCUMENT
Tender No: DRMWNGP-65-2019 Closing Date/Time: 23/09/2019 15:00
S.No. Item Code Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding Unit
Schedule 13-Part B: (4) Road work- Construction of RCC box 5.5 X 4.5m by
Above/
pushing/sliding method on Itarsi-Amla section in connection with elimination of manned 2789109.44
Below/Par
level crossing no. 237/A at Km. 794.189
Please see Item Breakup for details. 2685709.62 3.85 2789109.44
01
Item Description:- M. S. (USSOR) Item
S.No. Item Code Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding Unit
Schedule 14-Part B: (4) Road work- Construction of RCC box 5.5 X 4.5m by
Above/
pushing/sliding method on Itarsi-Amla section in connection with elimination of manned 57287.04
Below/Par
level crossing no. 237/A at Km. 794.189
Please see Item Breakup for details. 55163.25 3.85 57287.04
01
Item Description:- M. S. USSOR item No. 013120
S.No. Item Code Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding Unit
Schedule 15-Part B:(5) Cover shed Road - Construction of RCC box 5.5 X 4.5m by
Above/
pushing/sliding method on Itarsi-Amla section in connection with elimination of manned 3006990.80
Below/Par
level crossing no. 237/A at Km. 794.189
Please see Item Breakup for details. 2733628.00 10.00 3006990.80
01
Item Description:- M. S. Item
S.No. Item Code Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding Unit
Schedule 16-Part B:(6) Removing & refixing of Height Guage - Construction of RCC box
Above/
5.5 X 4.5m by pushing/sliding method on Itarsi-Amla section in connection with elimination 844384.04
Below/Par
of manned level crossing no. 237/A at Km. 794.189
Please see Item Breakup for details. 804788.45 4.92 844384.04
01
Item Description:- M. S. (USSOR) Item
S.No. Item Code Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding Unit
Schedule 17-Part B:(7) Transportation of RH Girder - Construction of RCC box 5.5 X 4.5m
Above/
by pushing/sliding method on Itarsi-Amla section in connection with elimination of manned 94223.20
Below/Par
level crossing no. 237/A at Km. 794.189
Please see Item Breakup for details. 94506.72 (-) 0.30 94223.20
01
Item Description:- M. S. (USSOR) Item
S.No. Item Code Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding Unit
Schedule 18-Part B:(8) Rain water harvesting - Construction of RCC box 5.5 X 4.5m by
Above/
pushing/sliding method on Itarsi-Amla section in connection with elimination of manned 1564388.67
Below/Par
level crossing no. 237/A at Km. 794.189
Please see Item Breakup for details. 1422171.52 10.00 1564388.67
01
Item Description:- M. S. (USSOR) Item
S.No. Item Code Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding Unit
Schedule 19-Part C: (1) RCC Box construction of RCC box 5.5 X 4.5m by pushing/sliding
Above/
method on Itarsi-Amla section in connection with elimination of manned level crossing no. 5197891.54
Below/Par
235 at Km. 783.210
Please see Item Breakup for details. 4954147.48 4.92 5197891.54
01
Item Description:- M. S. (USSOR) Item
S.No. Item Code Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding Unit
Schedule 20-Part C: (2) RCC Box construction of RCC box 5.5 X 4.5m by
Above/
pushing/sliding method on Itarsi-Amla section in connection with elimination of manned 10293348.67
Below/Par
level crossing no. 235 at Km. 783.210
Pa g e 3 o f 47 Ru n Da te/Time: 30 /0 8 /2 0 19 12 :2 0 :0 0
NAGPUR CR DIVISION-ENGINEERING/CENTRAL RLY
TENDER DOCUMENT
Tender No: DRMWNGP-65-2019 Closing Date/Time: 23/09/2019 15:00
S.No. Item Code Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding Unit
Schedule 21-Part C: (3) Face wall construction of RCC box 5.5 X 4.5m by
Above/
pushing/sliding method on Itarsi-Amla section in connection with elimination of manned 2791987.95
Below/Par
level crossing no. 235 at Km. 783.210
Please see Item Breakup for details. 2661063.62 4.92 2791987.95
01
Item Description:- M. S. (USSOR) Item
S.No. Item Code Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding Unit
Schedule 22-Part C: (4) Road work-Construction of RCC box 5.5 X 4.5m by
Above/
pushing/sliding method on Itarsi-Amla section in connection with elimination of manned 1316549.10
Below/Par
level crossing no. 235 at Km. 783.210
Please see Item Breakup for details. 1267741.07 3.85 1316549.10
01
Item Description:- M. S. (USSOR) Item
S.No. Item Code Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding Unit
Schedule 23-Part C: (4) Road work-Construction of RCC box 5.5 X 4.5m by
Above/
pushing/sliding method on Itarsi-Amla section in connection with elimination of manned 26733.95
Below/Par
level crossing no. 235 at Km. 783.210
Please see Item Breakup for details. 25742.85 3.85 26733.95
01
Item Description:- M. S. USSOR Item No. 013120
S.No. Item Code Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding Unit
Schedule 24-Part C: (5) Cover shed for Road-Construction of RCC box 5.5 X 4.5m by
Above/
pushing/sliding method on Itarsi-Amla section in connection with elimination of manned 3006990.80
Below/Par
level crossing no. 235 at Km. 783.210
Please see Item Breakup for details. 2733628.00 10.00 3006990.80
01
Item Description:- M. S. (USSOR) Item
S.No. Item Code Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding Unit
Schedule 25-Part C: (6) Removing & refixing of Height Guage-Construction of RCC box
Above/
5.5 X 4.5m by pushing/sliding method on Itarsi-Amla section in connection with elimination 844384.04
Below/Par
of manned level crossing no. 235 at Km. 783.210
Please see Item Breakup for details. 804788.45 4.92 844384.04
01
Item Description:- M. S. (USSOR) Item
S.No. Item Code Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding Unit
Schedule 26-Part C: (7) Transportation of RH Girder-Construction of RCC box 5.5 X 4.5m
Above/
by pushing/sliding method on Itarsi-Amla section in connection with elimination of manned 94223.20
Below/Par
level crossing no. 235 at Km. 783.210
Please see Item Breakup for details. 94506.72 (-) 0.30 94223.20
01
Item Description:- M. S. (USSOR) Item
S.No. Item Code Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding Unit
Schedule 27-Part C: (8) Rain water harvesting-Construction of RCC box 5.5 X 4.5m by
Above/
pushing/sliding method on Itarsi-Amla section in connection with elimination of manned 1564388.67
Below/Par
level crossing no. 235 at Km. 783.210
Please see Item Breakup for details. 1422171.52 10.00 1564388.67
01
Item Description:- M. S. (USSOR) Item
S.No. Item Code Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding Unit
Schedule 28-Part D: (1) RCC Box construction of RCC box 5.5 X 4.5m by pushing/sliding
Above/
method on Itarsi-Amla section in connection with elimination of manned level crossing no. 6459268.94
Below/Par
230 at Km. 772/12-14
Pa g e 4 o f 47 Ru n Da te/Time: 30 /0 8 /2 0 19 12 :2 0 :0 0
NAGPUR CR DIVISION-ENGINEERING/CENTRAL RLY
TENDER DOCUMENT
Tender No: DRMWNGP-65-2019 Closing Date/Time: 23/09/2019 15:00
S.No. Item Code Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding Unit
Schedule 29-Part D: (2) RCC Box construction of RCC box 5.5 X 4.5m by
Above/
pushing/sliding method on Itarsi-Amla section in connection with elimination of manned 10293348.67
Below/Par
level crossing no. 230 at Km. 772/12-14
Please see Item Breakup for details. 9810664.00 4.92 10293348.67
01
Item Description:- N. S. Item
S.No. Item Code Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding Unit
Schedule 30-Part D: (3) Face wall construction of RCC box 5.5 X 4.5m by
Above/
pushing/sliding method on Itarsi-Amla section in connection with elimination of manned 2791987.95
Below/Par
level crossing no. 230 at Km. 772/12-14
Please see Item Breakup for details. 2661063.62 4.92 2791987.95
01
Item Description:- M. S. (USSOR) Item
S.No. Item Code Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding Unit
Schedule 31-Part D: (4) Road work-Construction of RCC box 5.5 X 4.5m by
Above/
pushing/sliding method on Itarsi-Amla section in connection with elimination of manned 2789109.44
Below/Par
level crossing no. 230 at Km. 772/12-14
Please see Item Breakup for details. 2685709.62 3.85 2789109.44
01
Item Description:- M. S. (USSOR) Item
S.No. Item Code Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding Unit
Schedule 32-Part D: (4) Road work-Construction of RCC box 5.5 X 4.5m by
Above/
pushing/sliding method on Itarsi-Amla section in connection with elimination of manned 57287.04
Below/Par
level crossing no. 230 at Km. 772/12-14
Please see Item Breakup for details. 55163.25 3.85 57287.04
01
Item Description:- M. S. USSOR Item No. 013120
S.No. Item Code Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding Unit
Schedule 33-Part D: (5) Cover shed for Road-Construction of RCC box 5.5 X 4.5m by
Above/
pushing/sliding method on Itarsi-Amla section in connection with elimination of manned 3006990.80
Below/Par
level crossing no. 230 at Km. 772/12-14
Please see Item Breakup for details. 2733628.00 10.00 3006990.80
01
Item Description:- M. S. (USSOR)Item
S.No. Item Code Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding Unit
Schedule 34-Part D: (6) Removing & refixing of Height Guage-Construction of RCC box
Above/
5.5 X 4.5m by pushing/sliding method on Itarsi-Amla section in connection with elimination 844384.04
Below/Par
of manned level crossing no. 230 at Km. 772/12-14
Please see Item Breakup for details. 804788.45 4.92 844384.04
01
Item Description:- M. S. (USSOR) Item
S.No. Item Code Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding Unit
Schedule 35-Part D: (7) TRansportation of RH Girder-Construction of RCC box 5.5 X
Above/
4.5m by pushing/sliding method on Itarsi-Amla section in connection with elimination of 94223.20
Below/Par
manned level crossing no. 230 at Km. 772/12-14
Please see Item Breakup for details. 94506.72 (-) 0.30 94223.20
01
Item Description:- M. S. (USSOR)Item
S.No. Item Code Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding Unit
Schedule 36-Part D: (8) Rain water harvesting-Construction of RCC box 5.5 X 4.5m by
Above/
pushing/sliding method on Itarsi-Amla section in connection with elimination of manned 1564388.67
Below/Par
level crossing no. 230 at Km. 772/12-14
Pa g e 5 o f 47 Ru n Da te/Time: 30 /0 8 /2 0 19 12 :2 0 :0 0
NAGPUR CR DIVISION-ENGINEERING/CENTRAL RLY
TENDER DOCUMENT
Tender No: DRMWNGP-65-2019 Closing Date/Time: 23/09/2019 15:00
3. ITEM BREAKUP
Schedule 01-Part A: (1) RCC Box construction of RCC box 5.5 X 4.5m by pushing/sliding method on Itarsi-Amla
Schedule
section in connection with elimination of manned level crossing no. 240 at Km. 798.370
Item- 01 M. S. (USSOR) Item
S No. Item Description of Item Unit Qty Rate Amount
No
1 014010 Dressing Surface (average excavation or filling upto 15 cm) 10 Sqm 192.00 80.00 1536.00
including removing vegetation in all kind of soil. Payment
against this item is to be made only if it is not included in
earth work item
Loading/Unloading G.I. sheets, rails, joists, built up sections,
angles, C.I., Ductile pipes, A.C Pipes, or G.I. pipes
RCC/PCC beams / slabs and other miscellaneous ironwork
or wood work including lead upto 50m and stacking properly
into/from trucks, trailors or wagons.
2 021132 Individual length more than 3.5 M MT 64.00 152.38 9752.32
3 021170 Leading miscellaneous materials such as iron work, rails, MT 64.00 139.09 8901.76
pipes, wooden logs, stones over pitching stone size,
RCC/PCC beams / slabs etc. and all similar articles (each
individual article or bundle being more than 3.5 metres long
in the longest direction) by truck, trailor, etc including all
loading, unloading and stacking, lead over 500m and upto
10 km. Note : Lead under this item is payable when the
same exceeds 500m.
4 021171 Additional lead for every subsequent km or part thereof, MT/Km 5760.00 6.79 39110.40
over 10 km and upto 100 km over item no. 021170
5 021172 Additional lead for every subsequent km or part thereof, MT/Km 19200.00 5.10 97920.00
over 100 km and upto 400 km over item nos. 021170
&.021171
Supply and using cement at worksite :
6 033062 OPC 53 grade Tonne 145.00 6095.00 883775.00
Supplying Reinforcement for R.C.C. work including
straightening, cutting, bending, placing in position and
binding all complete.
7 045016 Thermo-Mechanically Treated bars Kg 45000.00 69.53 3128850.00
8 154140 Providing and fixing 75 mm PVC soil, waste and vent pipes Metre 100.00 187.86 18786.00
including jointing and cost of spun yarn and sand etc.,
complete
Exploratory drilling of Boreholes down to required depth,
drilling of 150mm diameter boreholes in all type of soils
except hard rock and large boulders (boulder core more
than 30 cm), including refilling and reinstating surface, and
disposing off surplus material including use of mechanical
rigs with power operated winches as well as percussion /
chieselling tool for advancing through occasional seams of
hard strata to be employed, where necessary in Dry area
9 191011 0m to 10m Metre 60.00 894.36 53661.60
Pa g e 6 o f 47 Ru n Da te/Time: 30 /0 8 /2 0 19 12 :2 0 :0 0
NAGPUR CR DIVISION-ENGINEERING/CENTRAL RLY
TENDER DOCUMENT
Tender No: DRMWNGP-65-2019 Closing Date/Time: 23/09/2019 15:00
10 194010 Providing and laying in position machine mixed, machine cum 300.00 1640.11 492033.00
vibrated and machine batched Design Mix Cement Concrete
M35 grade (Cast - in Situ) In Bottom/top slab, side walls, toe
wall and sumps haunch filling head walls or any other
component using 20 mm graded crushed stone aggregate
and coarse sand of approved quality of cast-in-situ RCC box
of size upto 5 M (bigger inside dimension) including
finishing, Admixtures in recommended proportions (as per
IS 9103), if approved in Mix design, to accelerate, retard
setting of concrete, improve workability without impairing
strength and durability, complete as per drawings and
technical specifications as directed by Engineer in charge.
Payment for cement, reinforcement and shuttering shall be
paid extra
Centring and shuttering including strutting, propping etc. and
removal of form for :
11 195038 In Bottom/top slab, side walls, toe wall and sumps haunch Sqm 600.00 229.50 137700.00
filling head walls or any other component
12 221050 Providing and laying Pitching with stone boulders weighing cum 90.00 912.46 82121.40
not less than 35 kg each with the voids filled with spalls on
slopes laid over prepared filter media including boulder
apron laid dry in front of toe of embankment complete as
per drawing and Technical specifications (Filter media to be
paid separately under the relevant item)
Total 4954147.48
Schedule 02-Part A: (2) RCC Box construction of RCC box 5.5 X 4.5m by pushing/sliding method on Itarsi-Amla
Schedule
section in connection with elimination of manned level crossing no. 240 at Km. 798.370
Item- 01 N. S. Item
S No. Item Description of Item Unit Qty Rate Amount
No
Pa g e 7 o f 47 Ru n Da te/Time: 30 /0 8 /2 0 19 12 :2 0 :0 0
NAGPUR CR DIVISION-ENGINEERING/CENTRAL RLY
TENDER DOCUMENT
Tender No: DRMWNGP-65-2019 Closing Date/Time: 23/09/2019 15:00
1 1 Insertion/ Removal of RH girder with the help of contractor's MT 100.00 7193.00 719300.00
road crane at desired location including all preparatory
works during traffic block / power block with all contractor's
labour , plants , tools, Equipments etc. complete. The weight
of reliving girder for payment purpose shall include weight of
girder proper, rails, bracings & associated fittings like cleats;
bolts etc. only. The unloading of RH Girder from Railway
BFR will be paid through a sepatate item if unloading
operation is done sepatately in advance other than main
block. The rate of item includes:- a) For insertion:- All
preparatory works connected with insertion of RH girder like
removal of track panel for required length by contractor's
road crane removal of ballast and stacking it at nominated
location, excavation of bank to required depth as per
Railway's approved drawing C.Rly drg. no. GM(W)BB/1176
& / drg.No. GM(W)BB/6400, preparation of base for RH
girder and linking of track on RH girder & its approaches
including one round packing to satisfaction of Engineer -in-
charge for making track fit for 20 kmph speed. The bolts &
clamps for RH girder assembly will however, be supplied by
the Railway. b) All works connected with removal of RH
girder from track like dismantling of track over RH girder,
removal of RH girder & keeping it at nominated place,
removal of CC cribs & wooden blocks filling up the bank over
box with Rly's excavated earth duly compacting the same,
spreading of ballast and linking of track duly giving one
round of packing to make track fir for 20 kmph speed. (Use
of coarse ground material sand / Quarry dust / murum if do
desired by Railway Engineer in case of excavated material
being clayey soil/BC soil etc. will be paid extra by operating
separate item for supply. Note:- c) Insertion and removal of
RH girders will be treated as a separate job & will be paid
accordingly. d) Transportation of RH girders to and from
work site including unloading at site will be paid separately
under relevant transportation items. e) The capacity of
crane and its operation schedule should be such so as to
cause least interference to traffic. f) The unloading of RH
girder from BFR when undertaken in block other than main
block, it will be paid through USSOR item no. 211180,
otherwise it will be deemed to be included in the main item.
Pa g e 8 o f 47 Ru n Da te/Time: 30 /0 8 /2 0 19 12 :2 0 :0 0
NAGPUR CR DIVISION-ENGINEERING/CENTRAL RLY
TENDER DOCUMENT
Tender No: DRMWNGP-65-2019 Closing Date/Time: 23/09/2019 15:00
2 2 Designing, Drawing, Casting RCC box of M-45 for Each 670.00 13569.20 9091364.00
prescribed loading conforming to 25T loading 2008 & clear
opening of 5.5 m X 4.5m with requisite steel cutting edge,
suitably designed drag shield necessary intermediate
jacking points, thrust bed etc. for box pushing process
across double / multiple line section including , excavation
and or filling in approach of bank for casting of boxes,
pushing of boxes with jacks & other arrangements of
adequate capacity under traffic running condition / block
period , excavation & removal of earth & rocks or other
obstructions as arising during pushing , disposal of earth /
rock within Railway boundary up to lead of 500 m or to
municipal dump as specified including all dewatering needed
,all temporary works required in above connection including
protection measures for maintaining Railway safety e. g.
retention of earth slope under box, maintaining of track over
and in approaches by contractor's labour under supervision
of Rly. PWI & making joints water tight by 'everdry' or
suitable grout etc. by contractor's men, materials, tools,
plants, equipments, power supply etc. required for
completing the work in all respects to the satisfaction of
engineer-in-charge. The cost of concrete, cement &
reinforcement, anticorrosive treatment for reinforcement will,
however be paid extra by operating separate USSOR items
indicated in schedule - for R.C.C. Box proper only. The
cement concrete will be paid through using USSOR item no.
194010. Rock requiring blasting if met during pushing will be
paid under relevant USSOR item duly deducting cost of
earth work in excavation under item no. 011011 ( Barrel
length = 16m, box size 5.5m X 4.5m =396 say 400 m2 per
sq m) Rate includes - (a) Cost of thrust bed & other efficient
arrangement required for box pushing in most expeditious
manner. (b) Cost of providing and fixing steel drag shield
(properly designed GI antirug sheet) cutting edge as per
approved design is included in item. (c ) Protecting the side
slope of cut bank inside RCC Box,during pushing with earth
filled gunny bags or any other method approved by
Enginner-in-charge & making all other required
arrangements for safe passage of trains at all times &
maintaning track parametres to prescribed standard. (d)
Filling of sand after required cutting to fill up undulations in
rock below RCC Box for easy pushing RCC Box. (e) Closing
7 plugging the gap between two units of push box with
suitable method to make the joints watertight by
polyurethane based grout or similar. (f) Back filling of gap
between cutting and vertcal walls of box by course grade
material like course sand or stone dust etcafter completion
of box pushing. (g) The design and execution scheme
should aim for minimum spell of speed restriction with least
interferrence to traffic.( Barrel lenth = 16m, box size 5.5m X
4.5 m =396 say 400m2 per m) Note: This item of box
pushing will be executed after insertion of R.H. Girder and
removing of formation/earth manually or by machanical
means. Removal of formation included in the item and will
not be paid separately. RCC box then shall be inserted
below track by pushing/sliding method. (Note: The unit of
this item is Per M length of Box per Sqm of Clear opening)
Total 9810664.00
Schedule 03-Part A: (3) Face wall construction of RCC box 5.5 X 4.5m by pushing/sliding method on Itarsi-Amla
Schedule
section in connection with elimination of manned level crossing no. 240 at Km. 798.370
Item- 01 M. S. (USSOR) Item
S No. Item Description of Item Unit Qty Rate Amount
No
Pa g e 9 o f 47 Ru n Da te/Time: 30 /0 8 /2 0 19 12 :2 0 :0 0
NAGPUR CR DIVISION-ENGINEERING/CENTRAL RLY
TENDER DOCUMENT
Tender No: DRMWNGP-65-2019 Closing Date/Time: 23/09/2019 15:00
Pa g e 10 o f 47 Ru n Da te/Time: 30 /0 8 /2 0 19 12 :2 0 :0 0
NAGPUR CR DIVISION-ENGINEERING/CENTRAL RLY
TENDER DOCUMENT
Tender No: DRMWNGP-65-2019 Closing Date/Time: 23/09/2019 15:00
Pa g e 11 o f 47 Ru n Da te/Time: 30 /0 8 /2 0 19 12 :2 0 :0 0
NAGPUR CR DIVISION-ENGINEERING/CENTRAL RLY
TENDER DOCUMENT
Tender No: DRMWNGP-65-2019 Closing Date/Time: 23/09/2019 15:00
1 1 Earthwork in filling in embankment, guide bunds, around cum 175.00 245.17 42904.75
buried type abutments, bridge gaps, trolley refuges, rain
bunds if provided, platforms etc. with earth excavated from
outside railway boundary entirely arranged by the contractor
at his own cost as per RDSO's latest guidelines and
specifications and special condition of contract including all
leads, royalty, lifts, ascents, descents, crossing of nallahs or
any other obstructions. The rates shall include all dressing
of bank to final profile, demarcation and setting out of
profile, site clearance, removing of shrubs, roots of
vegetations growth, heavy grass, benching of existing slope
of old bank, all handling/re-handling. taxes, octroi and
royalty etc. as a complete job. Cut trees shall be property of
railways and to be deposited in the railway godown unless
specified otherwise in the Special conditions of contract
Total 42904.75
Schedule 06-Part A: (5) Cover shed for Road-Construction of RCC box 5.5 X 4.5m by pushing/sliding method on
Schedule
Itarsi-Amla section in connection with elimination of manned level crossing no. 240 at Km. 798.370
Item- 01 M. S. (USSOR) Item
S No. Item Description of Item Unit Qty Rate Amount
No
Structural steel work riveted or bolted in built up sections,
trusses and framed work, girders, staging, racks etc
including cutting, bending, straightening, drilling, rivetting,
bolting, hoisting, fixing in position including applying a
priming coat of a approved steel primer complete - upto 6m
height above GL
1 081021 In RSJ, tees, angles and channels Kg 5000.00 72.19 360950.00
2 081022 In flats, plates, round or square bars Kg 3000.00 71.67 215010.00
3 081140 Supplying and fixing lewis/ holding down bolts of approved Kg 600.00 74.36 44616.00
design with nuts and washers complete
Steel work in built up tubular trusses including cutting,
hoisting, fixing in position and applying a priming coat of
approved steel primer, welded and bolted including special
shaped washers etc. complete
4 081292 Hot finished seamless type tubes Kg 9000.00 97.84 880560.00
5 101080 Supply & installation of precoated galvanized iron profile Sqm 1500.00 483.22 724830.00
sheets (size, shape and pitch of corrugation as approved by
Engineer-in-charge) 0.50mm +/- 5% total coated thickness
(TCT) thick Zinc coating 120gsm as per IS:277 in 240mpa
steel grade, 5-7microns epoxy primer on both side of the
sheet and polyester top coat 15-18 microns. Sheet should
have protective guard film of 25 microns minimum to avoid
scratches while transportation and should be supplied in
single length upto 12 metre or as desired by Engineer-in-
charge. The sheet shall be fixed using self drilling / self
tapping screws of size (5.5 x 55mm) with EPDM seal or with
polymer coated J or L hooks, bolts and nuts 8mm diameter
with bitumen and G.I. limpet washers or with G.I. limpet
washers filled with white lead complete upto any pitch in
horizontal/vertical or curved surfaces excluding the cost of
purlins, rafters and trusses and including cutting to size and
shape wherever required
Pa g e 12 o f 47 Ru n Da te/Time: 30 /0 8 /2 0 19 12 :2 0 :0 0
NAGPUR CR DIVISION-ENGINEERING/CENTRAL RLY
TENDER DOCUMENT
Tender No: DRMWNGP-65-2019 Closing Date/Time: 23/09/2019 15:00
Pa g e 13 o f 47 Ru n Da te/Time: 30 /0 8 /2 0 19 12 :2 0 :0 0
NAGPUR CR DIVISION-ENGINEERING/CENTRAL RLY
TENDER DOCUMENT
Tender No: DRMWNGP-65-2019 Closing Date/Time: 23/09/2019 15:00
Pa g e 14 o f 47 Ru n Da te/Time: 30 /0 8 /2 0 19 12 :2 0 :0 0
NAGPUR CR DIVISION-ENGINEERING/CENTRAL RLY
TENDER DOCUMENT
Tender No: DRMWNGP-65-2019 Closing Date/Time: 23/09/2019 15:00
Pa g e 15 o f 47 Ru n Da te/Time: 30 /0 8 /2 0 19 12 :2 0 :0 0
NAGPUR CR DIVISION-ENGINEERING/CENTRAL RLY
TENDER DOCUMENT
Tender No: DRMWNGP-65-2019 Closing Date/Time: 23/09/2019 15:00
17 252080 Stone Aggregate broken : 50 mm nominal size cum 6.00 1035.00 6210.00
18 252130 Fine sand (Zone IV) (Ordinary Sand) cum 6.00 1150.00 6900.00
Total 1422171.52
Schedule 10-Part B: (1) RCC Box construction of RCC box 5.5 X 4.5m by pushing/sliding method on Itarsi-Amla
Schedule
section in connection with elimination of manned level crossing no. 237/A at Km. 794.189
Item- 01 M. S. (USSOR) Item
S No. Item Description of Item Unit Qty Rate Amount
No
1 014010 Dressing Surface (average excavation or filling upto 15 cm) 10 Sqm 192.00 80.00 1536.00
including removing vegetation in all kind of soil. Payment
against this item is to be made only if it is not included in
earth work item
Loading/Unloading G.I. sheets, rails, joists, built up sections,
angles, C.I., Ductile pipes, A.C Pipes, or G.I. pipes
RCC/PCC beams / slabs and other miscellaneous ironwork
or wood work including lead upto 50m and stacking properly
into/from trucks, trailors or wagons.
2 021132 Individual length more than 3.5 M MT 64.00 152.38 9752.32
3 021170 Leading miscellaneous materials such as iron work, rails, MT 64.00 139.09 8901.76
pipes, wooden logs, stones over pitching stone size,
RCC/PCC beams / slabs etc. and all similar articles (each
individual article or bundle being more than 3.5 metres long
in the longest direction) by truck, trailor, etc including all
loading, unloading and stacking, lead over 500m and upto
10 km. Note : Lead under this item is payable when the
same exceeds 500m.
4 021171 Additional lead for every subsequent km or part thereof, MT/Km 5760.00 6.79 39110.40
over 10 km and upto 100 km over item no. 021170
5 021172 Additional lead for every subsequent km or part thereof, MT/Km 19200.00 5.10 97920.00
over 100 km and upto 400 km over item nos. 021170
&.021171
Supply and using cement at worksite :
6 033062 OPC 53 grade Tonne 145.00 6095.00 883775.00
Supplying Reinforcement for R.C.C. work including
straightening, cutting, bending, placing in position and
binding all complete.
7 045016 Thermo-Mechanically Treated bars Kg 45000.00 69.53 3128850.00
8 154140 Providing and fixing 75 mm PVC soil, waste and vent pipes Metre 100.00 187.86 18786.00
including jointing and cost of spun yarn and sand etc.,
complete
Exploratory drilling of Boreholes down to required depth,
drilling of 150mm diameter boreholes in all type of soils
except hard rock and large boulders (boulder core more
than 30 cm), including refilling and reinstating surface, and
disposing off surplus material including use of mechanical
rigs with power operated winches as well as percussion /
chieselling tool for advancing through occasional seams of
hard strata to be employed, where necessary in Dry area
9 191011 0m to 10m Metre 60.00 894.36 53661.60
Pa g e 16 o f 47 Ru n Da te/Time: 30 /0 8 /2 0 19 12 :2 0 :0 0
NAGPUR CR DIVISION-ENGINEERING/CENTRAL RLY
TENDER DOCUMENT
Tender No: DRMWNGP-65-2019 Closing Date/Time: 23/09/2019 15:00
10 194010 Providing and laying in position machine mixed, machine cum 300.00 1640.11 492033.00
vibrated and machine batched Design Mix Cement Concrete
M35 grade (Cast - in Situ) In Bottom/top slab, side walls, toe
wall and sumps haunch filling head walls or any other
component using 20 mm graded crushed stone aggregate
and coarse sand of approved quality of cast-in-situ RCC box
of size upto 5 M (bigger inside dimension) including
finishing, Admixtures in recommended proportions (as per
IS 9103), if approved in Mix design, to accelerate, retard
setting of concrete, improve workability without impairing
strength and durability, complete as per drawings and
technical specifications as directed by Engineer in charge.
Payment for cement, reinforcement and shuttering shall be
paid extra
Centring and shuttering including strutting, propping etc. and
removal of form for :
11 195038 In Bottom/top slab, side walls, toe wall and sumps haunch Sqm 600.00 229.50 137700.00
filling head walls or any other component
12 221050 Providing and laying Pitching with stone boulders weighing cum 90.00 912.46 82121.40
not less than 35 kg each with the voids filled with spalls on
slopes laid over prepared filter media including boulder
apron laid dry in front of toe of embankment complete as
per drawing and Technical specifications (Filter media to be
paid separately under the relevant item)
Total 4954147.48
Schedule 11-Part B: (2) RCC Box construction of RCC box 5.5 X 4.5m by pushing/sliding method on Itarsi-Amla
Schedule
section in connection with elimination of manned level crossing no. 237/A at Km. 794.189
Item- 01 N. S. Item
S No. Item Description of Item Unit Qty Rate Amount
No
Pa g e 17 o f 47 Ru n Da te/Time: 30 /0 8 /2 0 19 12 :2 0 :0 0
NAGPUR CR DIVISION-ENGINEERING/CENTRAL RLY
TENDER DOCUMENT
Tender No: DRMWNGP-65-2019 Closing Date/Time: 23/09/2019 15:00
1 1 Insertion/ Removal of RH girder with the help of contractor's MT 100.00 7193.00 719300.00
road crane at desired location including all preparatory
works during traffic block / power block with all contractor's
labour , plants , tools, Equipments etc. complete. The weight
of reliving girder for payment purpose shall include weight of
girder proper, rails, bracings & associated fittings like cleats;
bolts etc. only. The unloading of RH Girder from Railway
BFR will be paid through a sepatate item if unloading
operation is done sepatately in advance other than main
block. The rate of item includes:- a) For insertion:- All
preparatory works connected with insertion of RH girder like
removal of track panel for required length by contractor's
road crane removal of ballast and stacking it at nominated
location, excavation of bank to required depth as per
Railway's approved drawing C.Rly drg. no. GM(W)BB/1176
& / drg.No. GM(W)BB/6400, preparation of base for RH
girder and linking of track on RH girder & its approaches
including one round packing to satisfaction of Engineer -in-
charge for making track fit for 20 kmph speed. The bolts &
clamps for RH girder assembly will however, be supplied by
the Railway. b) All works connected with removal of RH
girder from track like dismantling of track over RH girder,
removal of RH girder & keeping it at nominated place,
removal of CC cribs & wooden blocks filling up the bank over
box with Rly's excavated earth duly compacting the same,
spreading of ballast and linking of track duly giving one
round of packing to make track fir for 20 kmph speed. (Use
of coarse ground material sand / Quarry dust / murum if do
desired by Railway Engineer in case of excavated material
being clayey soil/BC soil etc. will be paid extra by operating
separate item for supply. Note:- c) Insertion and removal of
RH girders will be treated as a separate job & will be paid
accordingly. d) Transportation of RH girders to and from
work site including unloading at site will be paid separately
under relevant transportation items. e) The capacity of
crane and its operation schedule should be such so as to
cause least interference to traffic. f) The unloading of RH
girder from BFR when undertaken in block other than main
block, it will be paid through USSOR item no. 211180,
otherwise it will be deemed to be included in the main item.
Pa g e 18 o f 47 Ru n Da te/Time: 30 /0 8 /2 0 19 12 :2 0 :0 0
NAGPUR CR DIVISION-ENGINEERING/CENTRAL RLY
TENDER DOCUMENT
Tender No: DRMWNGP-65-2019 Closing Date/Time: 23/09/2019 15:00
2 2 Designing, Drawing, Casting RCC box of M-45 for Each 670.00 13569.20 9091364.00
prescribed loading conforming to 25T loading 2008 & clear
opening of 5.5 m X 4.5m with requisite steel cutting edge,
suitably designed drag shield necessary intermediate
jacking points, thrust bed etc. for box pushing process
across double / multiple line section including , excavation
and or filling in approach of bank for casting of boxes,
pushing of boxes with jacks & other arrangements of
adequate capacity under traffic running condition / block
period , excavation & removal of earth & rocks or other
obstructions as arising during pushing , disposal of earth /
rock within Railway boundary up to lead of 500 m or to
municipal dump as specified including all dewatering needed
,all temporary works required in above connection including
protection measures for maintaining Railway safety e. g.
retention of earth slope under box, maintaining of track over
and in approaches by contractor's labour under supervision
of Rly. PWI & making joints water tight by 'everdry' or
suitable grout etc. by contractor's men, materials, tools,
plants, equipments, power supply etc. required for
completing the work in all respects to the satisfaction of
engineer-in-charge. The cost of concrete, cement &
reinforcement, anticorrosive treatment for reinforcement will,
however be paid extra by operating separate USSOR items
indicated in schedule - for R.C.C. Box proper only. The
cement concrete will be paid through using USSOR item no.
194010. Rock requiring blasting if met during pushing will be
paid under relevant USSOR item duly deducting cost of
earth work in excavation under item no. 011011 ( Barrel
length = 16m, box size 5.5m X 4.5m =396 say 400 m2 per
sq m) Rate includes - (a) Cost of thrust bed & other efficient
arrangement required for box pushing in most expeditious
manner. (b) Cost of providing and fixing steel drag shield
(properly designed GI antirug sheet) cutting edge as per
approved design is included in item. (c ) Protecting the side
slope of cut bank inside RCC Box,during pushing with earth
filled gunny bags or any other method approved by
Enginner-in-charge & making all other required
arrangements for safe passage of trains at all times &
maintaning track parametres to prescribed standard. (d)
Filling of sand after required cutting to fill up undulations in
rock below RCC Box for easy pushing RCC Box. (e) Closing
7 plugging the gap between two units of push box with
suitable method to make the joints watertight by
polyurethane based grout or similar. (f) Back filling of gap
between cutting and vertcal walls of box by course grade
material like course sand or stone dust etcafter completion
of box pushing. (g) The design and execution scheme
should aim for minimum spell of speed restriction with least
interferrence to traffic.( Barrel lenth = 16m, box size 5.5m X
4.5 m =396 say 400m2 per m) Note: This item of box
pushing will be executed after insertion of R.H. Girder and
removing of formation/earth manually or by machanical
means. Removal of formation included in the item and will
not be paid separately. RCC box then shall be inserted
below track by pushing/sliding method. (Note: The unit of
this item is Per M length of Box per Sqm of Clear opening)
Total 9810664.00
Schedule 12-Part B: (3) Face wall construction of RCC box 5.5 X 4.5m by pushing/sliding method on Itarsi-Amla
Schedule
section in connection with elimination of manned level crossing no. 237/A at Km. 794.189
Item- 01 M. S. (USSOR) Item
S No. Item Description of Item Unit Qty Rate Amount
No
Pa g e 19 o f 47 Ru n Da te/Time: 30 /0 8 /2 0 19 12 :2 0 :0 0
NAGPUR CR DIVISION-ENGINEERING/CENTRAL RLY
TENDER DOCUMENT
Tender No: DRMWNGP-65-2019 Closing Date/Time: 23/09/2019 15:00
Pa g e 2 0 o f 47 Ru n Da te/Time: 30 /0 8 /2 0 19 12 :2 0 :0 0
NAGPUR CR DIVISION-ENGINEERING/CENTRAL RLY
TENDER DOCUMENT
Tender No: DRMWNGP-65-2019 Closing Date/Time: 23/09/2019 15:00
Pa g e 2 1 o f 47 Ru n Da te/Time: 30 /0 8 /2 0 19 12 :2 0 :0 0
NAGPUR CR DIVISION-ENGINEERING/CENTRAL RLY
TENDER DOCUMENT
Tender No: DRMWNGP-65-2019 Closing Date/Time: 23/09/2019 15:00
1 1 Earthwork in filling in embankment, guide bunds, around cum 225.00 245.17 55163.25
buried type abutments, bridge gaps, trolley refuges, rain
bunds if provided, platforms etc. with earth excavated from
outside railway boundary entirely arranged by the contractor
at his own cost as per RDSO's latest guidelines and
specifications and special condition of contract including all
leads, royalty, lifts, ascents, descents, crossing of nallahs or
any other obstructions. The rates shall include all dressing
of bank to final profile, demarcation and setting out of
profile, site clearance, removing of shrubs, roots of
vegetations growth, heavy grass, benching of existing slope
of old bank, all handling/re-handling. taxes, octroi and
royalty etc. as a complete job. Cut trees shall be property of
railways and to be deposited in the railway godown unless
specified otherwise in the Special conditions of contract.
Total 55163.25
Schedule 15-Part B:(5) Cover shed Road - Construction of RCC box 5.5 X 4.5m by pushing/sliding method on
Schedule
Itarsi-Amla section in connection with elimination of manned level crossing no. 237/A at Km. 794.189
Item- 01 M. S. Item
S No. Item Description of Item Unit Qty Rate Amount
No
Structural steel work riveted or bolted in built up sections,
trusses and framed work, girders, staging, racks etc
including cutting, bending, straightening, drilling, rivetting,
bolting, hoisting, fixing in position including applying a
priming coat of a approved steel primer complete - upto 6m
height above GL
1 081021 In RSJ, tees, angles and channels Kg 5000.00 72.19 360950.00
2 081022 In flats, plates, round or square bars Kg 3000.00 71.67 215010.00
3 081140 Supplying and fixing lewis/ holding down bolts of approved Kg 600.00 74.36 44616.00
design with nuts and washers complete
Steel work in built up tubular trusses including cutting,
hoisting, fixing in position and applying a priming coat of
approved steel primer, welded and bolted including special
shaped washers etc. complete
4 081292 Hot finished seamless type tubes Kg 9000.00 97.84 880560.00
5 101080 Supply & installation of precoated galvanized iron profile Sqm 1500.00 483.22 724830.00
sheets (size, shape and pitch of corrugation as approved by
Engineer-in-charge) 0.50mm +/- 5% total coated thickness
(TCT) thick Zinc coating 120gsm as per IS:277 in 240mpa
steel grade, 5-7microns epoxy primer on both side of the
sheet and polyester top coat 15-18 microns. Sheet should
have protective guard film of 25 microns minimum to avoid
scratches while transportation and should be supplied in
single length upto 12 metre or as desired by Engineer-in-
charge. The sheet shall be fixed using self drilling / self
tapping screws of size (5.5 x 55mm) with EPDM seal or with
polymer coated J or L hooks, bolts and nuts 8mm diameter
with bitumen and G.I. limpet washers or with G.I. limpet
washers filled with white lead complete upto any pitch in
horizontal/vertical or curved surfaces excluding the cost of
purlins, rafters and trusses and including cutting to size and
shape wherever required
Pa g e 2 2 o f 47 Ru n Da te/Time: 30 /0 8 /2 0 19 12 :2 0 :0 0
NAGPUR CR DIVISION-ENGINEERING/CENTRAL RLY
TENDER DOCUMENT
Tender No: DRMWNGP-65-2019 Closing Date/Time: 23/09/2019 15:00
Pa g e 2 3 o f 47 Ru n Da te/Time: 30 /0 8 /2 0 19 12 :2 0 :0 0
NAGPUR CR DIVISION-ENGINEERING/CENTRAL RLY
TENDER DOCUMENT
Tender No: DRMWNGP-65-2019 Closing Date/Time: 23/09/2019 15:00
Pa g e 2 4 o f 47 Ru n Da te/Time: 30 /0 8 /2 0 19 12 :2 0 :0 0
NAGPUR CR DIVISION-ENGINEERING/CENTRAL RLY
TENDER DOCUMENT
Tender No: DRMWNGP-65-2019 Closing Date/Time: 23/09/2019 15:00
Pa g e 2 5 o f 47 Ru n Da te/Time: 30 /0 8 /2 0 19 12 :2 0 :0 0
NAGPUR CR DIVISION-ENGINEERING/CENTRAL RLY
TENDER DOCUMENT
Tender No: DRMWNGP-65-2019 Closing Date/Time: 23/09/2019 15:00
17 252080 Stone Aggregate broken : 50 mm nominal size cum 6.00 1035.00 6210.00
18 252130 Fine sand (Zone IV) (Ordinary Sand) cum 6.00 1150.00 6900.00
Total 1422171.52
Schedule 19-Part C: (1) RCC Box construction of RCC box 5.5 X 4.5m by pushing/sliding method on Itarsi-Amla
Schedule
section in connection with elimination of manned level crossing no. 235 at Km. 783.210
Item- 01 M. S. (USSOR) Item
S No. Item Description of Item Unit Qty Rate Amount
No
1 014010 Dressing Surface (average excavation or filling upto 15 cm) 10 Sqm 192.00 80.00 1536.00
including removing vegetation in all kind of soil. Payment
against this item is to be made only if it is not included in
earth work item
Loading/Unloading G.I. sheets, rails, joists, built up sections,
angles, C.I., Ductile pipes, A.C Pipes, or G.I. pipes
RCC/PCC beams / slabs and other miscellaneous ironwork
or wood work including lead upto 50m and stacking properly
into/from trucks, trailors or wagons.
2 021132 Individual length more than 3.5 M MT 64.00 152.38 9752.32
3 021170 Leading miscellaneous materials such as iron work, rails, MT 64.00 139.09 8901.76
pipes, wooden logs, stones over pitching stone size,
RCC/PCC beams / slabs etc. and all similar articles (each
individual article or bundle being more than 3.5 metres long
in the longest direction) by truck, trailor, etc including all
loading, unloading and stacking, lead over 500m and upto
10 km. Note : Lead under this item is payable when the
same exceeds 500m.
4 021171 Additional lead for every subsequent km or part thereof, MT/Km 5760.00 6.79 39110.40
over 10 km and upto 100 km over item no. 021170
5 021172 Additional lead for every subsequent km or part thereof, MT/Km 19200.00 5.10 97920.00
over 100 km and upto 400 km over item nos. 021170
&.021171
Supply and using cement at worksite :
6 033062 OPC 53 grade Tonne 145.00 6095.00 883775.00
Supplying Reinforcement for R.C.C. work including
straightening, cutting, bending, placing in position and
binding all complete.
7 045016 Thermo-Mechanically Treated bars Kg 45000.00 69.53 3128850.00
8 154140 Providing and fixing 75 mm PVC soil, waste and vent pipes Metre 100.00 187.86 18786.00
including jointing and cost of spun yarn and sand etc.,
complete
Exploratory drilling of Boreholes down to required depth,
drilling of 150mm diameter boreholes in all type of soils
except hard rock and large boulders (boulder core more
than 30 cm), including refilling and reinstating surface, and
disposing off surplus material including use of mechanical
rigs with power operated winches as well as percussion /
chieselling tool for advancing through occasional seams of
hard strata to be employed, where necessary in Dry area
9 191011 0m to 10m Metre 60.00 894.36 53661.60
Pa g e 2 6 o f 47 Ru n Da te/Time: 30 /0 8 /2 0 19 12 :2 0 :0 0
NAGPUR CR DIVISION-ENGINEERING/CENTRAL RLY
TENDER DOCUMENT
Tender No: DRMWNGP-65-2019 Closing Date/Time: 23/09/2019 15:00
10 194010 Providing and laying in position machine mixed, machine cum 300.00 1640.11 492033.00
vibrated and machine batched Design Mix Cement Concrete
M35 grade (Cast - in Situ) In Bottom/top slab, side walls, toe
wall and sumps haunch filling head walls or any other
component using 20 mm graded crushed stone aggregate
and coarse sand of approved quality of cast-in-situ RCC box
of size upto 5 M (bigger inside dimension) including
finishing, Admixtures in recommended proportions (as per
IS 9103), if approved in Mix design, to accelerate, retard
setting of concrete, improve workability without impairing
strength and durability, complete as per drawings and
technical specifications as directed by Engineer in charge.
Payment for cement, reinforcement and shuttering shall be
paid extra
Centring and shuttering including strutting, propping etc. and
removal of form for :
11 195038 In Bottom/top slab, side walls, toe wall and sumps haunch Sqm 600.00 229.50 137700.00
filling head walls or any other component
12 221050 Providing and laying Pitching with stone boulders weighing cum 90.00 912.46 82121.40
not less than 35 kg each with the voids filled with spalls on
slopes laid over prepared filter media including boulder
apron laid dry in front of toe of embankment complete as
per drawing and Technical specifications (Filter media to be
paid separately under the relevant item)
Total 4954147.48
Schedule 20-Part C: (2) RCC Box construction of RCC box 5.5 X 4.5m by pushing/sliding method on Itarsi-Amla
Schedule
section in connection with elimination of manned level crossing no. 235 at Km. 783.210
Item- 01 N S Item
S No. Item Description of Item Unit Qty Rate Amount
No
Pa g e 2 7 o f 47 Ru n Da te/Time: 30 /0 8 /2 0 19 12 :2 0 :0 0
NAGPUR CR DIVISION-ENGINEERING/CENTRAL RLY
TENDER DOCUMENT
Tender No: DRMWNGP-65-2019 Closing Date/Time: 23/09/2019 15:00
1 1 Insertion/ Removal of RH girder with the help of contractor's MT 100.00 7193.00 719300.00
road crane at desired location including all preparatory
works during traffic block / power block with all contractor's
labour , plants , tools, Equipments etc. complete. The weight
of reliving girder for payment purpose shall include weight of
girder proper, rails, bracings & associated fittings like cleats;
bolts etc. only. The unloading of RH Girder from Railway
BFR will be paid through a sepatate item if unloading
operation is done sepatately in advance other than main
block. The rate of item includes:- a) For insertion:- All
preparatory works connected with insertion of RH girder like
removal of track panel for required length by contractor's
road crane removal of ballast and stacking it at nominated
location, excavation of bank to required depth as per
Railway's approved drawing C.Rly drg. no. GM(W)BB/1176
& / drg.No. GM(W)BB/6400, preparation of base for RH
girder and linking of track on RH girder & its approaches
including one round packing to satisfaction of Engineer -in-
charge for making track fit for 20 kmph speed. The bolts &
clamps for RH girder assembly will however, be supplied by
the Railway. b) All works connected with removal of RH
girder from track like dismantling of track over RH girder,
removal of RH girder & keeping it at nominated place,
removal of CC cribs & wooden blocks filling up the bank over
box with Rly's excavated earth duly compacting the same,
spreading of ballast and linking of track duly giving one
round of packing to make track fir for 20 kmph speed. (Use
of coarse ground material sand / Quarry dust / murum if do
desired by Railway Engineer in case of excavated material
being clayey soil/BC soil etc. will be paid extra by operating
separate item for supply. Note:- c) Insertion and removal of
RH girders will be treated as a separate job & will be paid
accordingly. d) Transportation of RH girders to and from
work site including unloading at site will be paid separately
under relevant transportation items. e) The capacity of
crane and its operation schedule should be such so as to
cause least interference to traffic. f) The unloading of RH
girder from BFR when undertaken in block other than main
block, it will be paid through USSOR item no. 211180,
otherwise it will be deemed to be included in the main item.
Pa g e 2 8 o f 47 Ru n Da te/Time: 30 /0 8 /2 0 19 12 :2 0 :0 0
NAGPUR CR DIVISION-ENGINEERING/CENTRAL RLY
TENDER DOCUMENT
Tender No: DRMWNGP-65-2019 Closing Date/Time: 23/09/2019 15:00
2 2 Designing, Drawing, Casting RCC box of M-45 for Each 670.00 13569.20 9091364.00
prescribed loading conforming to 25T loading 2008 & clear
opening of 5.5 m X 4.5m with requisite steel cutting edge,
suitably designed drag shield necessary intermediate
jacking points, thrust bed etc. for box pushing process
across double / multiple line section including , excavation
and or filling in approach of bank for casting of boxes,
pushing of boxes with jacks & other arrangements of
adequate capacity under traffic running condition / block
period , excavation & removal of earth & rocks or other
obstructions as arising during pushing , disposal of earth /
rock within Railway boundary up to lead of 500 m or to
municipal dump as specified including all dewatering needed
,all temporary works required in above connection including
protection measures for maintaining Railway safety e. g.
retention of earth slope under box, maintaining of track over
and in approaches by contractor's labour under supervision
of Rly. PWI & making joints water tight by 'everdry' or
suitable grout etc. by contractor's men, materials, tools,
plants, equipments, power supply etc. required for
completing the work in all respects to the satisfaction of
engineer-in-charge. The cost of concrete, cement &
reinforcement, anticorrosive treatment for reinforcement will,
however be paid extra by operating separate USSOR items
indicated in schedule - for R.C.C. Box proper only. The
cement concrete will be paid through using USSOR item no.
194010. Rock requiring blasting if met during pushing will be
paid under relevant USSOR item duly deducting cost of
earth work in excavation under item no. 011011 ( Barrel
length = 16m, box size 5.5m X 4.5m =396 say 400 m2 per
sq m) Rate includes - (a) Cost of thrust bed & other efficient
arrangement required for box pushing in most expeditious
manner. (b) Cost of providing and fixing steel drag shield
(properly designed GI antirug sheet) cutting edge as per
approved design is included in item. (c ) Protecting the side
slope of cut bank inside RCC Box,during pushing with earth
filled gunny bags or any other method approved by
Enginner-in-charge & making all other required
arrangements for safe passage of trains at all times &
maintaning track parametres to prescribed standard. (d)
Filling of sand after required cutting to fill up undulations in
rock below RCC Box for easy pushing RCC Box. (e) Closing
7 plugging the gap between two units of push box with
suitable method to make the joints watertight by
polyurethane based grout or similar. (f) Back filling of gap
between cutting and vertcal walls of box by course grade
material like course sand or stone dust etcafter completion
of box pushing. (g) The design and execution scheme
should aim for minimum spell of speed restriction with least
interferrence to traffic.( Barrel lenth = 16m, box size 5.5m X
4.5 m =396 say 400m2 per m) Note: This item of box
pushing will be executed after insertion of R.H. Girder and
removing of formation/earth manually or by machanical
means. Removal of formation included in the item and will
not be paid separately. RCC box then shall be inserted
below track by pushing/sliding method. (Note: The unit of
this item is Per M length of Box per Sqm of Clear opening)
Total 9810664.00
Schedule 21-Part C: (3) Face wall construction of RCC box 5.5 X 4.5m by pushing/sliding method on Itarsi-Amla
Schedule
section in connection with elimination of manned level crossing no. 235 at Km. 783.210
Item- 01 M. S. (USSOR) Item
S No. Item Description of Item Unit Qty Rate Amount
No
Pa g e 2 9 o f 47 Ru n Da te/Time: 30 /0 8 /2 0 19 12 :2 0 :0 0
NAGPUR CR DIVISION-ENGINEERING/CENTRAL RLY
TENDER DOCUMENT
Tender No: DRMWNGP-65-2019 Closing Date/Time: 23/09/2019 15:00
Pa g e 30 o f 47 Ru n Da te/Time: 30 /0 8 /2 0 19 12 :2 0 :0 0
NAGPUR CR DIVISION-ENGINEERING/CENTRAL RLY
TENDER DOCUMENT
Tender No: DRMWNGP-65-2019 Closing Date/Time: 23/09/2019 15:00
Pa g e 31 o f 47 Ru n Da te/Time: 30 /0 8 /2 0 19 12 :2 0 :0 0
NAGPUR CR DIVISION-ENGINEERING/CENTRAL RLY
TENDER DOCUMENT
Tender No: DRMWNGP-65-2019 Closing Date/Time: 23/09/2019 15:00
1 1 Earthwork in filling in embankment, guide bunds, around cum 105.00 245.17 25742.85
buried type abutments, bridge gaps, trolley refuges, rain
bunds if provided, platforms etc. with earth excavated from
outside railway boundary entirely arranged by the contractor
at his own cost as per RDSO's latest guidelines and
specifications and special condition of contract including all
leads, royalty, lifts, ascents, descents, crossing of nallahs or
any other obstructions. The rates shall include all dressing
of bank to final profile, demarcation and setting out of
profile, site clearance, removing of shrubs, roots of
vegetations growth, heavy grass, benching of existing slope
of old bank, all handling/re-handling. taxes, octroi and
royalty etc. as a complete job. Cut trees shall be property of
railways and to be deposited in the railway godown unless
specified otherwise in the Special conditions of contract.
Total 25742.85
Schedule 24-Part C: (5) Cover shed for Road-Construction of RCC box 5.5 X 4.5m by pushing/sliding method on
Schedule
Itarsi-Amla section in connection with elimination of manned level crossing no. 235 at Km. 783.210
Item- 01 M. S. (USSOR) Item
S No. Item Description of Item Unit Qty Rate Amount
No
Structural steel work riveted or bolted in built up sections,
trusses and framed work, girders, staging, racks etc
including cutting, bending, straightening, drilling, rivetting,
bolting, hoisting, fixing in position including applying a
priming coat of a approved steel primer complete - upto 6m
height above GL
1 081021 In RSJ, tees, angles and channels Kg 5000.00 72.19 360950.00
2 081022 In flats, plates, round or square bars Kg 3000.00 71.67 215010.00
3 081140 Supplying and fixing lewis/ holding down bolts of approved Kg 600.00 74.36 44616.00
design with nuts and washers complete
Steel work in built up tubular trusses including cutting,
hoisting, fixing in position and applying a priming coat of
approved steel primer, welded and bolted including special
shaped washers etc. complete
4 081292 Hot finished seamless type tubes Kg 9000.00 97.84 880560.00
5 101080 Supply & installation of precoated galvanized iron profile Sqm 1500.00 483.22 724830.00
sheets (size, shape and pitch of corrugation as approved by
Engineer-in-charge) 0.50mm +/- 5% total coated thickness
(TCT) thick Zinc coating 120gsm as per IS:277 in 240mpa
steel grade, 5-7microns epoxy primer on both side of the
sheet and polyester top coat 15-18 microns. Sheet should
have protective guard film of 25 microns minimum to avoid
scratches while transportation and should be supplied in
single length upto 12 metre or as desired by Engineer-in-
charge. The sheet shall be fixed using self drilling / self
tapping screws of size (5.5 x 55mm) with EPDM seal or with
polymer coated J or L hooks, bolts and nuts 8mm diameter
with bitumen and G.I. limpet washers or with G.I. limpet
washers filled with white lead complete upto any pitch in
horizontal/vertical or curved surfaces excluding the cost of
purlins, rafters and trusses and including cutting to size and
shape wherever required
Pa g e 32 o f 47 Ru n Da te/Time: 30 /0 8 /2 0 19 12 :2 0 :0 0
NAGPUR CR DIVISION-ENGINEERING/CENTRAL RLY
TENDER DOCUMENT
Tender No: DRMWNGP-65-2019 Closing Date/Time: 23/09/2019 15:00
Pa g e 33 o f 47 Ru n Da te/Time: 30 /0 8 /2 0 19 12 :2 0 :0 0
NAGPUR CR DIVISION-ENGINEERING/CENTRAL RLY
TENDER DOCUMENT
Tender No: DRMWNGP-65-2019 Closing Date/Time: 23/09/2019 15:00
Pa g e 34 o f 47 Ru n Da te/Time: 30 /0 8 /2 0 19 12 :2 0 :0 0
NAGPUR CR DIVISION-ENGINEERING/CENTRAL RLY
TENDER DOCUMENT
Tender No: DRMWNGP-65-2019 Closing Date/Time: 23/09/2019 15:00
Pa g e 35 o f 47 Ru n Da te/Time: 30 /0 8 /2 0 19 12 :2 0 :0 0
NAGPUR CR DIVISION-ENGINEERING/CENTRAL RLY
TENDER DOCUMENT
Tender No: DRMWNGP-65-2019 Closing Date/Time: 23/09/2019 15:00
17 252080 Stone Aggregate broken : 50 mm nominal size cum 6.00 1035.00 6210.00
18 252130 Fine sand (Zone IV) (Ordinary Sand) cum 6.00 1150.00 6900.00
Total 1422171.52
Schedule 28-Part D: (1) RCC Box construction of RCC box 5.5 X 4.5m by pushing/sliding method on Itarsi-Amla
Schedule
section in connection with elimination of manned level crossing no. 230 at Km. 772/12-14
Item- 01 M. S. (USSOR) Item
S No. Item Description of Item Unit Qty Rate Amount
No
1 014010 Dressing Surface (average excavation or filling upto 15 cm) 10 Sqm 240.00 80.00 1920.00
including removing vegetation in all kind of soil. Payment
against this item is to be made only if it is not included in
earth work item
Loading/Unloading G.I. sheets, rails, joists, built up sections,
angles, C.I., Ductile pipes, A.C Pipes, or G.I. pipes
RCC/PCC beams / slabs and other miscellaneous ironwork
or wood work including lead upto 50m and stacking properly
into/from trucks, trailors or wagons.
2 021132 Individual length more than 3.5 M MT 64.00 152.38 9752.32
3 021170 Leading miscellaneous materials such as iron work, rails, MT 64.00 139.09 8901.76
pipes, wooden logs, stones over pitching stone size,
RCC/PCC beams / slabs etc. and all similar articles (each
individual article or bundle being more than 3.5 metres long
in the longest direction) by truck, trailor, etc including all
loading, unloading and stacking, lead over 500m and upto
10 km. Note : Lead under this item is payable when the
same exceeds 500m.
4 021171 Additional lead for every subsequent km or part thereof, MT/Km 5760.00 6.79 39110.40
over 10 km and upto 100 km over item no. 021170
5 021172 Additional lead for every subsequent km or part thereof, MT/Km 19200.00 5.10 97920.00
over 100 km and upto 400 km over item nos. 021170
&.021171
Supply and using cement at worksite :
6 033062 OPC 53 grade Tonne 180.00 6095.00 1097100.00
Supplying Reinforcement for R.C.C. work including
straightening, cutting, bending, placing in position and
binding all complete.
7 045016 Thermo-Mechanically Treated bars Kg 57000.00 69.53 3963210.00
8 154140 Providing and fixing 75 mm PVC soil, waste and vent pipes Metre 100.00 187.86 18786.00
including jointing and cost of spun yarn and sand etc.,
complete
Exploratory drilling of Boreholes down to required depth,
drilling of 150mm diameter boreholes in all type of soils
except hard rock and large boulders (boulder core more
than 30 cm), including refilling and reinstating surface, and
disposing off surplus material including use of mechanical
rigs with power operated winches as well as percussion /
chieselling tool for advancing through occasional seams of
hard strata to be employed, where necessary in Dry area
9 191011 0m to 10m Metre 60.00 894.36 53661.60
Pa g e 36 o f 47 Ru n Da te/Time: 30 /0 8 /2 0 19 12 :2 0 :0 0
NAGPUR CR DIVISION-ENGINEERING/CENTRAL RLY
TENDER DOCUMENT
Tender No: DRMWNGP-65-2019 Closing Date/Time: 23/09/2019 15:00
10 194010 Providing and laying in position machine mixed, machine cum 380.00 1640.11 623241.80
vibrated and machine batched Design Mix Cement Concrete
M35 grade (Cast - in Situ) In Bottom/top slab, side walls, toe
wall and sumps haunch filling head walls or any other
component using 20 mm graded crushed stone aggregate
and coarse sand of approved quality of cast-in-situ RCC box
of size upto 5 M (bigger inside dimension) including
finishing, Admixtures in recommended proportions (as per
IS 9103), if approved in Mix design, to accelerate, retard
setting of concrete, improve workability without impairing
strength and durability, complete as per drawings and
technical specifications as directed by Engineer in charge.
Payment for cement, reinforcement and shuttering shall be
paid extra
Centring and shuttering including strutting, propping etc. and
removal of form for :
11 195038 In Bottom/top slab, side walls, toe wall and sumps haunch Sqm 700.00 229.50 160650.00
filling head walls or any other component
12 221050 Providing and laying Pitching with stone boulders weighing cum 90.00 912.46 82121.40
not less than 35 kg each with the voids filled with spalls on
slopes laid over prepared filter media including boulder
apron laid dry in front of toe of embankment complete as
per drawing and Technical specifications (Filter media to be
paid separately under the relevant item)
Total 6156375.28
Schedule 29-Part D: (2) RCC Box construction of RCC box 5.5 X 4.5m by pushing/sliding method on Itarsi-Amla
Schedule
section in connection with elimination of manned level crossing no. 230 at Km. 772/12-14
Item- 01 N. S. Item
S No. Item Description of Item Unit Qty Rate Amount
No
Pa g e 37 o f 47 Ru n Da te/Time: 30 /0 8 /2 0 19 12 :2 0 :0 0
NAGPUR CR DIVISION-ENGINEERING/CENTRAL RLY
TENDER DOCUMENT
Tender No: DRMWNGP-65-2019 Closing Date/Time: 23/09/2019 15:00
1 1 Insertion/ Removal of RH girder with the help of contractor's MT 100.00 7193.00 719300.00
road crane at desired location including all preparatory
works during traffic block / power block with all contractor's
labour , plants , tools, Equipments etc. complete. The weight
of reliving girder for payment purpose shall include weight of
girder proper, rails, bracings & associated fittings like cleats;
bolts etc. only. The unloading of RH Girder from Railway
BFR will be paid through a sepatate item if unloading
operation is done sepatately in advance other than main
block. The rate of item includes:- a) For insertion:- All
preparatory works connected with insertion of RH girder like
removal of track panel for required length by contractor's
road crane removal of ballast and stacking it at nominated
location, excavation of bank to required depth as per
Railway's approved drawing C.Rly drg. no. GM(W)BB/1176
& / drg.No. GM(W)BB/6400, preparation of base for RH
girder and linking of track on RH girder & its approaches
including one round packing to satisfaction of Engineer -in-
charge for making track fit for 20 kmph speed. The bolts &
clamps for RH girder assembly will however, be supplied by
the Railway. b) All works connected with removal of RH
girder from track like dismantling of track over RH girder,
removal of RH girder & keeping it at nominated place,
removal of CC cribs & wooden blocks filling up the bank over
box with Rly's excavated earth duly compacting the same,
spreading of ballast and linking of track duly giving one
round of packing to make track fir for 20 kmph speed. (Use
of coarse ground material sand / Quarry dust / murum if do
desired by Railway Engineer in case of excavated material
being clayey soil/BC soil etc. will be paid extra by operating
separate item for supply. Note:- c) Insertion and removal of
RH girders will be treated as a separate job & will be paid
accordingly. d) Transportation of RH girders to and from
work site including unloading at site will be paid separately
under relevant transportation items. e) The capacity of
crane and its operation schedule should be such so as to
cause least interference to traffic. f) The unloading of RH
girder from BFR when undertaken in block other than main
block, it will be paid through USSOR item no. 211180,
otherwise it will be deemed to be included in the main item.
Pa g e 38 o f 47 Ru n Da te/Time: 30 /0 8 /2 0 19 12 :2 0 :0 0
NAGPUR CR DIVISION-ENGINEERING/CENTRAL RLY
TENDER DOCUMENT
Tender No: DRMWNGP-65-2019 Closing Date/Time: 23/09/2019 15:00
2 2 Designing, Drawing, Casting RCC box of M-45 for Each 670.00 13569.20 9091364.00
prescribed loading conforming to 25T loading 2008 & clear
opening of 5.5 m X 4.5m with requisite steel cutting edge,
suitably designed drag shield necessary intermediate
jacking points, thrust bed etc. for box pushing process
across double / multiple line section including , excavation
and or filling in approach of bank for casting of boxes,
pushing of boxes with jacks & other arrangements of
adequate capacity under traffic running condition / block
period , excavation & removal of earth & rocks or other
obstructions as arising during pushing , disposal of earth /
rock within Railway boundary up to lead of 500 m or to
municipal dump as specified including all dewatering needed
,all temporary works required in above connection including
protection measures for maintaining Railway safety e. g.
retention of earth slope under box, maintaining of track over
and in approaches by contractor's labour under supervision
of Rly. PWI & making joints water tight by 'everdry' or
suitable grout etc. by contractor's men, materials, tools,
plants, equipments, power supply etc. required for
completing the work in all respects to the satisfaction of
engineer-in-charge. The cost of concrete, cement &
reinforcement, anticorrosive treatment for reinforcement will,
however be paid extra by operating separate USSOR items
indicated in schedule - for R.C.C. Box proper only. The
cement concrete will be paid through using USSOR item no.
194010. Rock requiring blasting if met during pushing will be
paid under relevant USSOR item duly deducting cost of
earth work in excavation under item no. 011011 ( Barrel
length = 16m, box size 5.5m X 4.5m =396 say 400 m2 per
sq m) Rate includes - (a) Cost of thrust bed & other efficient
arrangement required for box pushing in most expeditious
manner. (b) Cost of providing and fixing steel drag shield
(properly designed GI antirug sheet) cutting edge as per
approved design is included in item. (c ) Protecting the side
slope of cut bank inside RCC Box,during pushing with earth
filled gunny bags or any other method approved by
Enginner-in-charge & making all other required
arrangements for safe passage of trains at all times &
maintaning track parametres to prescribed standard. (d)
Filling of sand after required cutting to fill up undulations in
rock below RCC Box for easy pushing RCC Box. (e) Closing
7 plugging the gap between two units of push box with
suitable method to make the joints watertight by
polyurethane based grout or similar. (f) Back filling of gap
between cutting and vertcal walls of box by course grade
material like course sand or stone dust etcafter completion
of box pushing. (g) The design and execution scheme
should aim for minimum spell of speed restriction with least
interferrence to traffic.( Barrel lenth = 16m, box size 5.5m X
4.5 m =396 say 400m2 per m) Note: This item of box
pushing will be executed after insertion of R.H. Girder and
removing of formation/earth manually or by machanical
means. Removal of formation included in the item and will
not be paid separately. RCC box then shall be inserted
below track by pushing/sliding method. (Note: The unit of
this item is Per M length of Box per Sqm of Clear opening)
Total 9810664.00
Schedule 30-Part D: (3) Face wall construction of RCC box 5.5 X 4.5m by pushing/sliding method on Itarsi-Amla
Schedule
section in connection with elimination of manned level crossing no. 230 at Km. 772/12-14
Item- 01 M. S. (USSOR) Item
S No. Item Description of Item Unit Qty Rate Amount
No
Pa g e 39 o f 47 Ru n Da te/Time: 30 /0 8 /2 0 19 12 :2 0 :0 0
NAGPUR CR DIVISION-ENGINEERING/CENTRAL RLY
TENDER DOCUMENT
Tender No: DRMWNGP-65-2019 Closing Date/Time: 23/09/2019 15:00
Pa g e 40 o f 47 Ru n Da te/Time: 30 /0 8 /2 0 19 12 :2 0 :0 0
NAGPUR CR DIVISION-ENGINEERING/CENTRAL RLY
TENDER DOCUMENT
Tender No: DRMWNGP-65-2019 Closing Date/Time: 23/09/2019 15:00
Pa g e 41 o f 47 Ru n Da te/Time: 30 /0 8 /2 0 19 12 :2 0 :0 0
NAGPUR CR DIVISION-ENGINEERING/CENTRAL RLY
TENDER DOCUMENT
Tender No: DRMWNGP-65-2019 Closing Date/Time: 23/09/2019 15:00
1 1 Earthwork in filling in embankment, guide bunds, around cum 225.00 245.17 55163.25
buried type abutments, bridge gaps, trolley refuges, rain
bunds if provided, platforms etc. with earth excavated from
outside railway boundary entirely arranged by the contractor
at his own cost as per RDSO's latest guidelines and
specifications and special condition of contract including all
leads, royalty, lifts, ascents, descents, crossing of nallahs or
any other obstructions. The rates shall include all dressing
of bank to final profile, demarcation and setting out of
profile, site clearance, removing of shrubs, roots of
vegetations growth, heavy grass, benching of existing slope
of old bank, all handling/re-handling. taxes, octroi and
royalty etc. as a complete job. Cut trees shall be property of
railways and to be deposited in the railway godown unless
specified otherwise in the Special conditions of contract.
Total 55163.25
Schedule 33-Part D: (5) Cover shed for Road-Construction of RCC box 5.5 X 4.5m by pushing/sliding method on
Schedule
Itarsi-Amla section in connection with elimination of manned level crossing no. 230 at Km. 772/12-14
Item- 01 M. S. (USSOR)Item
S No. Item Description of Item Unit Qty Rate Amount
No
Structural steel work riveted or bolted in built up sections,
trusses and framed work, girders, staging, racks etc
including cutting, bending, straightening, drilling, rivetting,
bolting, hoisting, fixing in position including applying a
priming coat of a approved steel primer complete - upto 6m
height above GL
1 081021 In RSJ, tees, angles and channels Kg 5000.00 72.19 360950.00
2 081022 In flats, plates, round or square bars Kg 3000.00 71.67 215010.00
3 081140 Supplying and fixing lewis/ holding down bolts of approved Kg 600.00 74.36 44616.00
design with nuts and washers complete
Steel work in built up tubular trusses including cutting,
hoisting, fixing in position and applying a priming coat of
approved steel primer, welded and bolted including special
shaped washers etc. complete
4 081292 Hot finished seamless type tubes Kg 9000.00 97.84 880560.00
5 101080 Supply & installation of precoated galvanized iron profile Sqm 1500.00 483.22 724830.00
sheets (size, shape and pitch of corrugation as approved by
Engineer-in-charge) 0.50mm +/- 5% total coated thickness
(TCT) thick Zinc coating 120gsm as per IS:277 in 240mpa
steel grade, 5-7microns epoxy primer on both side of the
sheet and polyester top coat 15-18 microns. Sheet should
have protective guard film of 25 microns minimum to avoid
scratches while transportation and should be supplied in
single length upto 12 metre or as desired by Engineer-in-
charge. The sheet shall be fixed using self drilling / self
tapping screws of size (5.5 x 55mm) with EPDM seal or with
polymer coated J or L hooks, bolts and nuts 8mm diameter
with bitumen and G.I. limpet washers or with G.I. limpet
washers filled with white lead complete upto any pitch in
horizontal/vertical or curved surfaces excluding the cost of
purlins, rafters and trusses and including cutting to size and
shape wherever required
Pa g e 42 o f 47 Ru n Da te/Time: 30 /0 8 /2 0 19 12 :2 0 :0 0
NAGPUR CR DIVISION-ENGINEERING/CENTRAL RLY
TENDER DOCUMENT
Tender No: DRMWNGP-65-2019 Closing Date/Time: 23/09/2019 15:00
Pa g e 43 o f 47 Ru n Da te/Time: 30 /0 8 /2 0 19 12 :2 0 :0 0
NAGPUR CR DIVISION-ENGINEERING/CENTRAL RLY
TENDER DOCUMENT
Tender No: DRMWNGP-65-2019 Closing Date/Time: 23/09/2019 15:00
Pa g e 44 o f 47 Ru n Da te/Time: 30 /0 8 /2 0 19 12 :2 0 :0 0
NAGPUR CR DIVISION-ENGINEERING/CENTRAL RLY
TENDER DOCUMENT
Tender No: DRMWNGP-65-2019 Closing Date/Time: 23/09/2019 15:00
Pa g e 45 o f 47 Ru n Da te/Time: 30 /0 8 /2 0 19 12 :2 0 :0 0
NAGPUR CR DIVISION-ENGINEERING/CENTRAL RLY
TENDER DOCUMENT
Tender No: DRMWNGP-65-2019 Closing Date/Time: 23/09/2019 15:00
17 252080 Stone Aggregate broken : 50 mm nominal size cum 6.00 1035.00 6210.00
18 252130 Fine sand (Zone IV) (Ordinary Sand) cum 6.00 1150.00 6900.00
Total 1422171.52
4. ELIGIBILITY CONDITIONS
Submission of Affidavit
5. COMPLIANCE
Commercial-Compliance
Pa g e 46 o f 47 Ru n Da te/Time: 30 /0 8 /2 0 19 12 :2 0 :0 0
NAGPUR CR DIVISION-ENGINEERING/CENTRAL RLY
TENDER DOCUMENT
Tender No: DRMWNGP-65-2019 Closing Date/Time: 23/09/2019 15:00
Please enter the percentage of local content in the material being offered.
Please enter 0 for fully imported items, and 100 for fully indigenous items. The Allowed
1 No Yes
definition and calculation of local content shall be in accordance with the Make (Optional)
in India policy as incorporated in the tender conditions.
Undertakings
This tender complies with Public Procurement Policy (Make in India) Order 2017, dated 15/06/2017, issued by
Department of Industrial Promotion and Policy, Ministry of Commerce, circulated vide Railway Board letter no.
2015/RS(G)/779/5 dated 03/08/2017 and 27/12/2017.
Designation : Sr.DENCo1
Pa g e 47 o f 47 Ru n Da te/Time: 30 /0 8 /2 0 19 12 :2 0 :0 0