Professional Documents
Culture Documents
Hardware
Contents
1 Hardware Changes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1.1 Board Changes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1.2 Not supported boards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1.3 Frames . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
1.4 New boards. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2 Hard Disk Compact Flash (HDCF) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2.1 Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2.2 Hardware Part Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
2.3 LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
2.4 Administration with HiPath 4000 Assistant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
2.5 Administration with AMOs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
2.6 Restrictions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2.7 New Features with HDCF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
2.7.1 CR RQ00022813 Support of Duplication Function HDMO/HDCF . . . . . . . . . . . . . . . 9
2.7.2 CR RQ00022812 Support Mixed Operation HDMO/HDCF . . . . . . . . . . . . . . . . . . . . 9
3 AC-WIN IP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
3.1 System concept . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
3.2 Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
3.3 Variants from ACWIN IP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
1
EN4442EN00EN_0001
© 2007 Siemens AG
Siemens Hardware
2
EN4442EN00EN_0001
© 2007 Siemens AG
Hardware Siemens
1 Hardware Changes
3
EN4442EN00EN_0001
© 2007 Siemens AG
Siemens Hardware
1.3 Frames
The frames 80CMX-DSC, 80CXE, 600ECX and 600 ECS will be supported. The SNMP func-
tionality can’t be activated with this platform. CPCI hardware is necessary therefore.
4
EN4442EN00EN_0001
© 2007 Siemens AG
Hardware Siemens
2.1 Hardware
The HDCF board consists of an hard disk (HD) and a compact flash card (CF).
5
EN4442EN00EN_0001
© 2007 Siemens AG
Siemens Hardware
The board can be plugged and extracted at any time when the system is running. To prevent
the loss of data it is necessary to disable any access to the drives before the board is
extracted.
Also the CF/Microdrive Medium can be plugged and extracted at any time when the system is
running, provided that no access is active.
>
Before removing this module or the module in slot 1 the AMO DEACT-DSSM:
A1,1,,YES; has to be executed.
2.3 LEDs
The front side of the board features two green LEDs that indicate the status of the individual
drives:
IDE 1: HD (= upper LED), which is located at left side of the board.
IDE 2: CF (= lower LED), which is located at right side of the board.
6
EN4442EN00EN_0001
© 2007 Siemens AG
Hardware Siemens
● Choose Initialize and Update RMX values for initialization of the HDCF.
For more information please refer to the administrator documentation of „Backup and Restore“
in the Intranet (http://netinfo2db.icn.siemens.de:8080/techdoc/en/P31003H3440M1130176A9/
index.html).
7
EN4442EN00EN_0001
© 2007 Siemens AG
Siemens Hardware
Notes
> ● The only difference from the 1.3 GB MOD setup is the sector size (which
are really physically different)
● Only 1.3 GB is configured for compatibility reasons, but the whole device
capacity can be used with proper DTSM definition if needed.
2.6 Restrictions
● Since there is no medium locking mechanism in CF-Cards additional care has to be taken
that the device is deactivated both on the RMX (DEACT-DSSM) and Unix (amount if
necessary) sides before it is removed.
● Due to the standard Unix device handling mechanism it is necessary to have a card
inserted during the Unix boot phase, otherwise no device resources will be allocated for
the CF-Card.
After startup the device can already be changed.
● It is not permitted to start device operations under Unix if no card is inserted, because it
results in a hanging I/O operation. (But it does not relate to operations started in
dipas_batch, since these run on the RMX side.)
● Any CF-Card greater than 2 GByte will be treated as an 2 GByte CF in HiPath Backup &
Restore.
● In RMX backups HiPath Backup & Restore will use only 1,3 Gbyte of the CF-Card.
8
EN4442EN00EN_0001
© 2007 Siemens AG
Hardware Siemens
9
EN4442EN00EN_0001
© 2007 Siemens AG
Siemens Hardware
10
EN4442EN00EN_0001
© 2007 Siemens AG
Hardware Siemens
3 AC-WIN IP
The comfort operator´s position AC-Win IP V1.0 of the Realtime-IP-Systems HiPath 4000 V2.0
/ V3.0 is a Windows®-application being based on a PC.
According to size of the system and the company structure one or several operator positions
can be fit out. The up to 60 different service features AC-Win are by means of a Windows sur-
face easy help. They facilitate for example of external or internal calls. The arriving calls know
in two (AC-Win 2Q IP V1.0) or twelve queues (AC-Win MQ IP 1.0) to be represented.
11
EN4442EN00EN_0001
© 2007 Siemens AG
Siemens Hardware
3.2 Hardware
● For AC-Win IP V1.0
(AC-Win 2Q IP V1.0 and AC-Win MQ IP V1.0)
– Windows XP Professional with Service Pack 2
– Pentium® 4 with min. 1,7 GHz
– RAM: min. 512 Mbyte
– Harddisk: at least 256 Mbyte free non removable disk capacity
– Min. 19"- Screen (1240 x 1024)
– CD-ROM- or DVD-Device
– Sound-Card
– Multimedia-Keyboard
– For AC-Win IP approved USB-Hand-/Headset
12
EN4442EN00EN_0001
© 2007 Siemens AG
Hardware Siemens
13
EN4442EN00EN_0001
© 2007 Siemens AG
Siemens Hardware
b) ACWIN MQ IP
14
EN4442EN00EN_0001
© 2007 Siemens AG